Re: working with windows larger than screen

Hi! On Mon, Feb 26, 2007 at 05:57:05PM -0500, Kamaraju S Kusumanchi wrote: > Can anyone recommend a window manager or a desktop environment which > efficiently handles windows that are larger than physical size of screen? > > any ideas? I use Window Maker. Here, if the opened window is larger th

Installing Debian Etch on hw RAID 1 on nvidia nForce 430i

Hello! I want to install Debian Etch on my new box with motherboard that has for the storage the nvidia nForce 430i chipset. This chipset support RAID 1 configuration. I want to install Etch on two SATA disk with the hardware RAID 1 setup. I setup in the BIOS the RAID 1 for these disks. I hav

apach2 behind firewall

Hello! I have apache2 behind a firewall. I want to setup firewall so, that one can it reach from the internet. I red the documentations: Linux 2.4 Packet Filtering HOWTO from Rusty Russell Linux 2.4 NAT HOWTO from Rusty Russell man iptables Setting up a simple Debian gateway

Re: Add hardware to an existing system

On Fri, Dec 15, 2006 at 05:14:27PM +, kevin bailey wrote: > > Now I take it that during installation the hardware was detected and the > various modules were selected and loaded. How to I tell the system to load > the new modules required? Compile the new kernel with support for that new har

icewm & nautilus

Hello! I installed on an old Toshiba laptop the Debian Etch system. The windowmanager is icewm and I want to use the nautilus with it. I try to edit the ~/.xinitrc : exec /usr/X11R6/bin/icewm exec /usr/X11R6/bin/nautilus I make .xinitrc executable. Still the nautilus want not to run automatica

On Etch can't to remove a broken package

Hello! On Etch I have installed a package: ltmodem-2.6.8-2-386 that I have been downloaded. This installation wasn't success. After that this package came to be broken. If I try to remove this package, I get an error message: --> (Reading database ... 60952 files and directorie

Re: On Etch can't to remove a broken package - Solved

Hello! On Wed, Jan 03, 2007 at 08:15:44PM +0100, Florian Kulzer wrote: > I think you can trick the script by creating a small dummy file which > looks like it was generated during the ltmodem installation. The postrm > script can then remove this dummy file and it will be happy that it did > its

xcdroast Invalid readcd version -unknown- found

Hello! I upgraded from Sarge to Etch. :) Now I try to run Xcdroast (from an xterm), but get an error message: --> ** (xcdroast:9724): WARNING **: Invalid readcd version -unknown- found. Expecting at least version 1.1.0 Start xcdroast with the -n option to override (not recommende

Re: xcdroast Invalid readcd version -unknown- found

On Mon, Jan 08, 2007 at 10:41:54AM +0100, Sven Arvidsson wrote: > > --> > > ** (xcdroast:9724): WARNING **: Invalid readcd version -unknown- found. > > Expecting at least version 1.1.0 > > Start xcdroast with the -n option to override (not recommended!) > > --< > >

set up Etch to unicode

Hello! I upgraded the system from Sarge to Etch. Now, I want to setup the X Window system to unicode. How can I do that? There on Etch isn't there the localeconf package. Any advices will be appreciated! -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRI

set up Etch to unicode

Hello! I upgraded the system from Sarge to Etch. Now, I want to setup the X Window system to unicode. How can I do that? There on Etch isn't there the localeconf package. Any advices will be appreciated! -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRI

Re: set up Etch to unicode

On Mon, Jan 08, 2007 at 03:54:26PM -0500, Kevin Mark wrote: > On Mon, Jan 08, 2007 at 08:31:35PM +0100, csanyipal wrote: > > I upgraded the system from Sarge to Etch. > > > > Now, I want to setup the X Window system to unicode. > > > > How can I do that? >

Re: set up Etch to unicode

Hello Roberto! On Mon, Jan 08, 2007 at 06:50:02PM -0500, Roberto C. Sanchez wrote: > On Mon, Jan 08, 2007 at 11:19:51PM +0100, csanyipal wrote: > > > > OK I installed utf8-migration-tool, but how can I use it? > > > > No man page is here. Try to locate utf-8, b

Re: set up Etch to unicode

On Tue, Jan 09, 2007 at 10:10:42AM -0600, Matt Zagrabelny wrote: > On Mon, 2007-01-08 at 20:16 +0100, csanyipal wrote: > > > > I upgraded the system from Sarge to Etch. > > > > Now, I want to setup the X Window system to unicode. > > are you talking about X ap

When login, get error: configuration error - unknown item 'FAIL_DELAY' (notify administrator)

Hello! I upgraded my Debian system from Sarge to Etch. After that, whenever I login, get the error messages on Vterm: -> configuration error - unknown item 'FAIL_DELAY' (notify administrator) configuration error - unknown item 'QUOTAS_ENAB' (notify administrator) configuration err

Re: When login, get error: configuration error - unknown item 'FAIL_DELAY' (notify administrator)

On Wed, Jan 10, 2007 at 07:55:35AM -0800, Andrew Sackville-West wrote: > On Wed, Jan 10, 2007 at 03:24:46PM +0100, csanyipal wrote: > > .. login: unknown configuration item `CLOSE_SESSIONS' > > -^ > crucial information, IMO. I would check /etc/login.defs, in sid

monodevelop in Etch

Hello! I run Etch and want to use the mono on it. I can't to find monodevelop for Etch. Will there be monodevelop in etch? -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [E

monodevelop in Etch

Hello! I run Etch and want to use the mono on it. I can't to find monodevelop for Etch. Will there be monodevelop in etch? -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [E

How can I know whether my Etch system isn't broken?

Hello! I have dist upgraded from Sarge to Etch since a 1-2 month. I use Synaptic for this and to installing packages. Now I think that that maybe my system is broken, because of some bugs that I find in emacs21. When I find bug in emacs21 and jde that I try to use with emacs21, I report bug wi

Re: printing jpeg images A4 size

On Tue, Feb 13, 2007 at 11:12:47AM -0600, Hugo Vanwoerkom wrote: > >Anybody know how to make a jpeg image fill the entire printed page and > >print it as such? > > > > I manage it in a ridiculous way: I display them with: > http://packages.debian.org/unstable/web/wordpress > > and adjust the si

Re: plase help me install printer debian-sarge

On Wed, Feb 14, 2007 at 10:12:30AM +0100, Johannes Wiedersich wrote: > Tuani Panggabean wrote: > > plase help me install printer debian-sarge. > > speck printer Hp laser-jet 1320 > > posision printer : ipaddress 192.168.10.9) > > thanks > > If you really need help on this you should consider tak

Re: monodevelop in Etch - Success!

On Wed, Feb 14, 2007 at 09:44:14PM +0100, kfitzgeralald wrote: > > I wrote a how-to guide a couple of days ago for exactly this: > > http://kevinfitzgerald.net/sto/monodevelop-debian-etch.html > > Hope this helps, Yes, I install successfully the monodevelop package using this guide. Thanks! I

Which one package serve to build debian package from CVS source?

Hello! There was for this pourpose the checkinstall on Sarge, but now, on Etch, which one package serve for this pourpose out there? If I download some source from one CVS, then can I use dh-make to convert it into a format that will allow me to build Debian packages, right? But then, how can

Re: system-dependent variables - One of the solutions

Hello! One of the solutions is that that must to reinstall Debian system. I did it. I will never install again from source without checkinstall, I hope so. -- Regards, Paul Csányi http://csanyipal.info/moodle <<<--- Moodle - Course Management System -- To UNSUBSCRIBE, email to [EMAIL PROT

apache2-doc - The requested URL /manual/ was not found on this server.

Hello! I just installed apache2 & apache2-doc on Sarge. I don't put yet any index.html file in the apache2-default/ directory, so there one can see the apache2 initial page out there. On that page is the link to manual & when I klick on it, I should to see the m

Re: apache2-doc - The requested URL /manual/ was not found on this server. - OK

On Wed, Aug 30, 2006 at 04:17:27PM +0200, Guillaume wrote: > csanyipal a écrit : > > > >I just installed apache2 & apache2-doc on Sarge. > > > >I don't put yet any index.html file in the apache2-default/ directory, > >so there one can see the apache2 init

SSH port 22 is invisible from the internet!! :(

Hello! I have installed on Etch openssh-client & openssh-server. I can to login to localhost with ssh. I want to allow a remote user to login with ssh on to my system. I use iptables as a firewall and have added a rule to open the port 22: $ sudo iptables -L ... target prot opt source

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 09:35:50AM -0400, Douglas Allan Tutty wrote: > Just because you opened the port doesn't mean that ssh will listen on > that interface automatically; tell it. Port 22 > May I also suggest limiting ssh logins to members of the ssh group? And > disallow root login via ssh.

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 03:53:24PM +0200, Jochen Schulz wrote: > > I use iptables as a firewall and have added a rule to open the port 22: > > That probably means you are blocking any traffic not explicitly allowed, > correct? Maybe it would help to show us your complete iptables script. I attac

Re: SSH port 22 is invisible from the internet!! :( - Sorry, the Attachment..

On Mon, Apr 09, 2007 at 06:12:06PM +0200, csanyipal wrote: > On Mon, Apr 09, 2007 at 03:53:24PM +0200, Jochen Schulz wrote: > > > > I use iptables as a firewall and have added a rule to open the port 22: > > > > That probably means you are blocking any traffic not expl

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 07:18:58PM +0200, Franck Joncourt wrote: > First of all, if I were you, I would try to get an access to your > ssh server through 127.0.0.1. > > # telnet 127.0.0.1 22 > > should display SSH banner. Something like this : > > ### > Trying 127.0.0.1... > Connected to 127.0.

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 07:04:16PM +0200, gianca wrote: > csanyipal ha scritto: > > On Mon, Apr 09, 2007 at 09:35:50AM -0400, Douglas Allan Tutty wrote: > > > >> Just because you opened the port doesn't mean that ssh will listen on > >> that interface au

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 08:56:40PM +0200, Jochen Schulz wrote: > Hm, weird setup. So you get a non-public IP address on eth0 via DHCP and > a "static" public address for ppp0? Exactly! > > I do: > > $ sudo tcpdump -vv -i ppp0 "port 22" > > tcpdump: listening on ppp0, link-type LINUX_SLL (Linux c

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 09:02:49PM +0200, gianca wrote: > >> Have you any setting for option "ListenAddress" in "/etc/ssh/sshd_config" ? > > Yes: > > #ListenAddress :: > > #ListenAddress 0.0.0.0 > So there is no limitation. > > You said you can "ssh localhost", didn't you? Yes, I can! :) > "nma

Re: SSH port 22 is invisible from the internet!! :(

On Mon, Apr 09, 2007 at 07:48:11PM -0700, Dusty Wilson wrote: > Sorry if I missed it, but has anyone mentioned netstat? > > sudo netstat -lnp | grep ssh > > That should show if you have any running ssh processes listening on > your server and which IP addresses/port numbers it is listening on. >

Re: SSH port 22 is invisible from the internet!! :(

On Tue, Apr 10, 2007 at 08:06:36AM -0400, Roberto C. Sánchez wrote: > > sudo netstat -lnp | grep ssh > > > > That should show if you have any running ssh processes listening on > > your server and which IP addresses/port numbers it is listening on. > > If you haven't already done such a thing, co

Re: SSH port 22 is invisible from the internet!! - SOLVED

Hello! :) On Mon, Apr 09, 2007 at 03:53:24PM +0200, Jochen Schulz wrote: > If you suspect SSH is being blocked by a system not under your control, > you could try to have sshd listen on a port other than 22 (443 comes to > mind). Maybe your ISP/hosting provider blocks 22. Yes, my ISP/hosting pro

Re: SSH port 22 is invisible from the internet!! :(

On Tue, Apr 10, 2007 at 03:29:24PM +0200, Jörg-Volker Peetz wrote: > > > > I have installed on Etch openssh-client & openssh-server. > > > > I can to login to localhost with ssh. > > > > I want to allow a remote user to login with ssh on to my system. > > > > What is the contents of your /etc

Re: Etch upgrade and keyboard in WindowMaker

Hello! On Sun, Apr 15, 2007 at 05:14:28PM -0400, Roberto C. Sánchez wrote: > Hello all. I upgraded my workstation from Sarge to Etch this weekend. > The biggest annoynce I have encountered is that my keyboard is "broken" > in WindowMaker. That is, alt+tab no longer switches between windows. > F1

Re: Architecural modelling software

On Wed, Apr 25, 2007 at 10:42:26PM +0100, andy wrote: > I am looking for some architectural design modelling software that will > enable one to design buildings and model the effects of lighting, wind, > insulation values, etc. > Does anyone know of anything that can do this kind of job? I've sea

programming LPT port

Hello! I wish to programing LPT port on the PC box from Debian Etch system. I wish to make some applications that can run on other platforms too. (eg.: win 32) Which one programming language is capable to easily access the LPT port and in the same time to allow to port the applications to other

Re: programming LPT port

Hello Doug! On Mon, Apr 30, 2007 at 10:33:31AM -0400, Douglas Allan Tutty wrote: > On Mon, Apr 30, 2007 at 01:08:09PM +0200, csanyipal wrote: > > > > I wish to programing LPT port on the PC box from Debian Etch system. > > I wish to make some applications that can run o

Re: programming LPT port

On Mon, Apr 30, 2007 at 07:26:41PM +0200, csanyipal wrote: > > > I wish to programing LPT port on the PC box from Debian Etch system. > > > I wish to make some applications that can run on other platforms too. > > > (eg.: win 32) > > Python has modules for acc

glibc 2.4 to install

Hello! I have installed brlcad on my Etch system. I downloaded it from http://sourceforge.net/projects/brlcad/ When I run it, I get error messages: $ mged mged: /lib/tls/libc.so.6: version `GLIBC_2.4' not found (required by mged) mged: /lib/tls/libc.so.6: version `GLIBC_2.4' not found (required

Setup PATH for X Window (urxvt)

Hello! I try to setup PATH permanently for X Window, that is for urxvt, in which must to run brlcad. brlcad is here: /usr/brlcad/bin Now, if I run mged (editor for brlcad) I must to open urxvt, then setup PATH for brlcad and then can run mged. I want to setup PATH permanently to can run brlca

Re: Setup PATH for X Window (urxvt)

On Tue, May 01, 2007 at 11:51:07AM +0100, Liam O'Toole wrote: > Are you using GDM to log in? It does execute a login shell default. Yes. I edit the /etc/gdm/Init/Default but still not change the PATH. I try to edit /etc/gdm/PostLogin/Default too, but with no success. > Better, though, would be

after compiling the kernel 2.6.18 bash error message & no X Window

/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x \ "/var/lib/gdm/:0.Xservers" -h "" -l ":0" "csanyipal" /etc/gdm/Xsession: Beginning session setup... /etc/gdm/Xsession: line 165: grep: command not found /etc/gdm/X

Re: Solved

Hello! On Sat, May 12, 2007 at 12:58:31PM +0200, csanyipal wrote: > My system is Debian Etch. > > After I downloaded the new linux-source-2.6.18, compiled it and > installed the new custom kernel, I get error messages on console prompt > when logged in: > -bash: id: command

installing tutos2

Hello! I try to install tutos2 but aptitude can't to create postgresql database tutos. I get the error message: -> Creating the POSTGRES TUTOS database... HOST: localhost PORT: 5432 DBUSER: www-data DBNAME: tutos ---

Re: installing tutos2

Hello Jose! On Sun, May 20, 2007 at 10:32:47AM -0400, Jose Luis Rivas Contreras wrote: > csanyipal escribió: > > createdb: could not connect to database template1: could not connect to > > server: A csatlakozás megtagadva > > Is the server running on host "localhost

Re: installing tutos2

On Sun, May 20, 2007 at 04:44:57PM -0400, Roberto C. Sánchez wrote: > On Sun, May 20, 2007 at 06:49:07PM +0200, csanyipal wrote: > > > > My /etc/postgresql/7.4/main/pg_hba.conf on my Debian Etch has the > > following lines enabled: > > > > ---

Re: [OT] Re: installing tutos2

On Sun, May 20, 2007 at 05:37:27PM -0400, Roberto C. Sánchez wrote: > On Sun, May 20, 2007 at 11:03:49PM +0200, csanyipal wrote: > > > > This abowe is in Hungarian. > > > > I can't remember how can I set the LANG environment variable for a > > command to

Re: [OT] Re: installing tutos2

On Sun, May 20, 2007 at 05:37:27PM -0400, Roberto C. Sánchez wrote: > On Sun, May 20, 2007 at 11:03:49PM +0200, csanyipal wrote: > > > > This abowe is in Hungarian. > I have this on my system: > > $ cat /etc/default/locale > # File generated by update-locale > LAN

Re: [OT] Re: installing tutos2

On Thu, May 24, 2007 at 11:39:31PM +0200, csanyipal wrote: > [EMAIL PROTECTED]:~$ sudo /etc/init.d/postgresql-7.4 restart > Restarting PostgreSQL 7.4 database server: main. > > I think it is all OK, except that that I cant open in my browser the > webpage: localhost/tutos/php/a

Re: [OT] Re: installing tutos2

On Fri, May 25, 2007 at 12:07:57AM +0200, csanyipal wrote: > On Thu, May 24, 2007 at 11:39:31PM +0200, csanyipal wrote: > > > [EMAIL PROTECTED]:~$ sudo /etc/init.d/postgresql-7.4 restart > > Restarting PostgreSQL 7.4 database server: main. > > > > I think it is a

Re: [OT] Re: installing tutos2

On Fri, May 25, 2007 at 11:35:48AM -0400, Roberto C. Sánchez wrote: > On Thu, May 24, 2007 at 11:39:31PM +0200, csanyipal wrote: > > > > > > sudo dpkg-reconfigure tutos2 > > Document `TUTOS' is not installed, cannot remove. > >

Re: [OT] Re: installing tutos2

On Fri, May 25, 2007 at 01:56:54PM -0400, Roberto C. Sánchez wrote: > On Fri, May 25, 2007 at 06:33:21PM +0200, csanyipal wrote: > > > > /etc/postgresql/8.1/main/pg_hba.conf : > > > > --> > > # Database administrative login by UNIX sockets

Re: [OT] Re: installing tutos2

On Fri, May 25, 2007 at 05:26:51PM -0400, Roberto C. Sánchez wrote: > On Fri, May 25, 2007 at 08:24:58PM +0200, csanyipal wrote: > > > > Yes,now and after I edited the pg_hba.conf, I restarted postgresql too. > > > > But I get the same error message: > >

Re: [OT] Re: installing tutos2

On Sat, May 26, 2007 at 10:40:57AM +0200, csanyipal wrote: > On Fri, May 25, 2007 at 05:26:51PM -0400, Roberto C. Sánchez wrote: > > On Fri, May 25, 2007 at 08:24:58PM +0200, csanyipal wrote: > > > > > > Yes,now and after I edited the pg_hba.conf, I restarted postgre

Re: [OT] Re: installing tutos2

On Sat, May 26, 2007 at 09:32:28AM -0400, Roberto C. Sánchez wrote: > On Sat, May 26, 2007 at 10:40:57AM +0200, csanyipal wrote: > > > > No, I didn't this in postgres, but with sudo vigr. > > > > I still can't to use tutos2 on my Debian Etch system. >

Re: [OT] Re: installing tutos2

On Sat, May 26, 2007 at 06:07:32PM -0400, Roberto C. Sánchez wrote: > > > Log in to postgres and execute this: > > > > > > SELECT * FROM pg_user; > > > > > > Paste the results. > > > > [EMAIL PROTECTED]:~$ su > > Password: >

Re: [OT] Re: installing tutos2

luntil | useconfig > > --+--+-+--+---+--+--+--- > > postgres |1 | t | t| t | | > > | > > phpgroupware |2 | f | f| f | | > > | > >

Re: [OT] Re: installing tutos2

On Thu, May 31, 2007 at 10:20:04AM -0400, Roberto C. Sánchez wrote: > > I run http://csanyi-pal.info/tutos/php/admin/scheme.php and get an > > empty webpage in my browser without any error message. > > > > Then I try to open http://csanyi-pal.info/tutos/php/mytutos.php but get > > only an empty

Re: [OT] Re: installing tutos2 - Almost solved

On Thu, May 31, 2007 at 11:21:30PM +0200, csanyipal wrote: > I purge everything: tutos2, postgresql, mysql, php4 and install these > once again. Now I can get the error message in my webbrowser, if try to > open http://csanyi-pal.info/tutos/php/admin/scheme.php I edit again carefully

Re: [OT] Re: installing tutos2 - not yet solved

On Sat, Jun 02, 2007 at 11:41:02AM -0400, Roberto C. Sánchez wrote: > > > I purge everything: tutos2, postgresql, mysql, php4 and install these > > > once again. Now I can get the error message in my webbrowser, if try to > > > open http://csanyi-pal.info/tutos/php/admin/scheme.php > > > > I ed

Re: [OT] Re: installing tutos2 - not yet solved

On Sat, Jun 02, 2007 at 04:53:49PM -0400, Roberto C. Sánchez wrote: > On Sat, Jun 02, 2007 at 07:07:51PM +0200, csanyipal wrote: > > > > I run reportbug and find this information about tutos2 & mysql: > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3539

xorg & hardwear support for GeForce 7600GS Leadtek AGP

Hello! System: Etch, kernel 2.6.18 Before I by this videocard, I want to be sure that that xorg supports it. Is somewhere a list of videocards supported by xorg? Any advices will be appreciated! -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email

Re: [OT] Re: installing tutos2 - almost solved

On Sun, Jun 03, 2007 at 07:55:41AM +0200, csanyipal wrote: > On Sat, Jun 02, 2007 at 04:53:49PM -0400, Roberto C. Sánchez wrote: > Yes, I'm trying to run tutos2 on Etch. :) Now I have installed tutos2 on Etch. I used php4, & postgresql-7.4. Before installing tutos2 I created wit

Re: [OT] Re: installing tutos2 - almost solved

On Sat, Jun 09, 2007 at 10:36:19AM -0400, Roberto C. Sánchez wrote: > On Thu, Jun 07, 2007 at 09:26:52PM +0200, csanyipal wrote: > > > > Before installing tutos2 I created with postgres user the "www-data" > > user on postmaster and give him rights to create databa

Re: [OT] Re: installing tutos2 - almost solved

uname --> demo POST: pw --> xxx POST: dbnr--> 0 POST: login --> Bejelentkezés RemoteAddr: 127.0.0.1 Referer:http://csanyi-pal.info/tutos/php/\ mytutos.php?msg=goodbye TUTOS Version: 2.0-dev Database: POSTGRES: [EMAIL PROTECTED]:5432 as

Re: [OT] Re: installing tutos2 - almost solved

On Sun, Jun 10, 2007 at 09:12:25AM -0400, Roberto C. Sánchez wrote: > > > > I run the [tutos_dir]/tutos/php/admin/scheme.php and create > > > > successfully the tables in the tutos database, & create the superuser > > > > with password "tutos". > > > > > > > > But I can't to change the superuse

supported hardware accelerated 3D card with OpenGL driver

Hello! My system is Etch, with compiled kernel-2.6.18. I want to by a cheaper (around 160 USD) hardware accelerated 3D videocard for which I can to install an OpenGL driver. I think it will to be some PCI-E nvidia or ati videocard, right? Any advices will be appreciated! -- Regards, Paul Csá

Re: supported hardware accelerated 3D card with OpenGL driver

Hello Doug! On Wed, Jun 13, 2007 at 09:44:02AM -0400, Douglas Allan Tutty wrote: > On Wed, Jun 13, 2007 at 12:01:47PM +0200, csanyipal wrote: > > My system is Etch, with compiled kernel-2.6.18. > > > > I want to by a cheaper (around 160 USD) hardware accelerated 3D videocard

Re: resizing pictures and EXIF

Hi! On Thu, Jun 14, 2007 at 04:07:39PM +0200, Lubos Vrbka wrote: > hi guys, > > does anyone know good way how to resize jpg pictures and preserve EXIF > at the same time, preferably using graphics/imagemagick? it seems that > graphicsmagick removes the EXIF information, but maybe there is some

Re: supported hardware for Debian Etch

Hello! On Wed, Jun 13, 2007 at 07:15:36PM -0400, Douglas Allan Tutty wrote: > On Wed, Jun 13, 2007 at 04:34:26PM +0200, csanyipal wrote: > > > I see that Asus EN7300GT silent is an excellent choice, isn't? > > Works just fine for me; 1600x1200 at 85 Hz (the monitor

Re: screenshot

On Wed, Jun 20, 2007 at 09:09:50PM +0200, Mathias Brodala wrote: > Hi Frank. > > Frank McCormick, 20.06.2007 20:56: > > Anybody know of relatively simple software to take screenshots of the > > dexktop or of windows of applications. Gnome-utils contains a screenshot > > maker but its a 6 meg downl

Re: supported hardware accelerated 3D card with OpenGL driver

On Wed, Jun 13, 2007 at 07:15:36PM -0400, Douglas Allan Tutty wrote: > On Wed, Jun 13, 2007 at 04:34:26PM +0200, csanyipal wrote: > > > I see that Asus EN7300GT silent is an excellent choice, isn't? > > Works just fine for me; 1600x1200 at 85 Hz (the monitor's

nvidia-glx & linux-image-2.6.18-4-486 & a custom linux image?

Hello! I want to by a videocard: MSI nVidia NX7600GS-T2D512EH 400MHz/800MHz/DDR2 128-bit/TV-out&2xDVI/SLI For this to work, a will to install nvidia-glx debian package. But, with this package apt will to install: linux-image-2.6.18-4-486 too. I have yet a custom linux-image-2.6.18. I don't kno

compatible UPS

Hello! Is this UPS supported by Etch? Inform Guard 600A (600VA)/Line Interractive/AVR Any advices will be appreciated! -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL

Re: compatible UPS - solved

On Fri, Jun 22, 2007 at 12:19:13PM +0200, csanyipal wrote: > Is this UPS supported by Etch? > > Inform Guard 600A (600VA)/Line Interractive/AVR > > Any advices will be appreciated! Sorry for this mail abowe. I find this link, which solve my problem: http://www.apcupsd.org/ --

Re: compatible UPS - solved

On Fri, Jun 22, 2007 at 11:32:32AM -0500, Hugo Vanwoerkom wrote: > csanyipal wrote: > >On Fri, Jun 22, 2007 at 12:19:13PM +0200, csanyipal wrote: > > > >>Is this UPS supported by Etch? > >> > >>Inform Guard 600A (600VA)/Line Interractive/AVR > >>

checkinstall kqemu-1.3.0pre9

Hello! I have download the kqemu-1.3.0pre9: wget http://fabrice.bellard.free.fr/qemu/kqemu-1.3.0pre9.tar.gz and unpuck it to the /tmp/ directory. Then i cd to that directory and try: # ./configure && make && checkinstall but get the error message: Selecting previously deselected package kqemu-

Setting up a home gateway/router

Hi, I wish to set up my home headless power pc box as a gateway/router ( GW ). I can connect to it with SSH only. Before, I set up this GW to get an IP address from my ISP with dhcp.client. Now, I ask a static IP address for this GW and don't know how to setup eth0 interface so I can connect to

Re: Setting up a home gateway/router

Hi Vincent, "Vincent W. Chen" writes: > On Thu, May 22, 2014 at 9:57 PM, wrote: >> I wish to set up my home headless power pc box as a gateway/router ( GW ). >> I can connect to it with SSH only. >> >> Before, I set up this GW to get an IP address from my ISP with >> dhcp.client. Before eth0

Re: Setting up a home gateway/router

Curt writes: > On 2014-05-23, Pascal Hambourg wrote: > >>> Do you mean that eth0 on GW has a static IP address? >> >> No, the OP wrote that internet-facing eth0 has a DHCP address from the ISP. > > I understood that *before* he had a DHCP address from his ISP, but *now* > he has a static address

Re: Setting up a home gateway/router

csanyi...@gmail.com writes: > So I tried with this setup: > iface eth0 inet static > address 217.17.111.173 > netmask 255.255.255.0 but it doesn't work. Say, the output of the command 'ping gnu.org' is: ping: unknown host gnu.org >>> My ISP >>> | >>> --- eth0 ( GW ) --- eth1 >>>

Re: Setting up a home gateway/router

Ron Leach writes: > On 23/05/2014 16:52, csanyi...@gmail.com wrote: >> csanyi...@gmail.com writes: >> >>> So I tried with this setup: >>> iface eth0 inet static >>> address 217.17.111.173 >>> netmask 255.255.255.0 >> >> but it doesn't work. >> >> Say, the output of the command 'ping g

Re: Setting up a home gateway/router

Mike McGinn writes: > Comments below > On Friday, May 23, 2014 11:52:43 csanyi...@gmail.com wrote: >> csanyi...@gmail.com writes: >> > So I tried with this setup: >> > iface eth0 inet static >> > >> > address 217.17.111.173 >> > netmask 255.255.255.0 >> >> but it doesn't work. > I bui

Re: Setting up a home gateway/router

Reco writes: > On Sat, 24 May 2014 12:21:05 +0200 > csanyi...@gmail.com wrote: > >> Yes, I thought as much, but don't know which IP address to add as a >> default gateway in my case? >> >> The command should look like this: >> # route add -net 10.0.0.0 netmask 255.0.0.0 gw 192.168.0.1 dev eth0 >

Re: Setting up a home gateway/router

Reco writes: > Hi. > > On Sat, 24 May 2014 15:06:52 +0200 > csanyi...@gmail.com wrote: > >> Well, I just tried that, but without success. > > /24 net allows 256 addresses. You've tried one (and is using another > one), so it's 254 to go. > > As I wrote, if you don't want to guess - check with yo

Re: Setting up a home gateway/router

Pascal Hambourg writes: > csanyi...@gmail.com a écrit : >> Reco writes: >> >>> >>> /24 net allows 256 addresses. You've tried one (and is using another >>> one), so it's 254 to go. > > Less. .0 and .255 are reserved as network and broadcast addresses. > >> Also, I get no documentation else with

Compiling kernel from Github - Howto?

Hi, I have a headless powerpc box and run on it Debian Wheezy with kernel Linux b2 3.2.62-1 #1 Mon Aug 25 04:22:40 UTC 2014 ppc GNU/Linux . But this kernel doesn't have support for the rtl8192cu kernel-module. One can to get the kernel source from here: https://github.com/Excito/community-b3-ker

Re: Compiling kernel from Github - Howto?

Gary Dale writes: > On 17/01/15 10:19 AM, csanyi...@gmail.com wrote: >> I have a headless powerpc box and run on it Debian Wheezy with kernel >> Linux b2 3.2.62-1 #1 Mon Aug 25 04:22:40 UTC 2014 ppc GNU/Linux . >> >> But this kernel doesn't have support for the rtl8192cu kernel-module. >> >> One

Re: Compiling kernel from Github - Howto?

csanyi...@gmail.com writes: > Gary Dale writes: > >> On 17/01/15 10:19 AM, csanyi...@gmail.com wrote: > >>> I have a headless powerpc box and run on it Debian Wheezy with kernel >>> Linux b2 3.2.62-1 #1 Mon Aug 25 04:22:40 UTC 2014 ppc GNU/Linux . >>> >>> But this kernel doesn't have support for

Re: In menuconfig when Load an Alternate Configuration File, can't enter the file name

Ric Moore writes: > On 03/01/2015 12:55 AM, Csányi Pál wrote: >> I'm compiling a custom kernel for my Debian Wheezy operating system. >> >> In menuconfig when Load an Alternate Configuration File, can't enter >> the file name. >> The cursor blinking in the field but can't enter any letter. >> >>

Re: In menuconfig when Load an Alternate Configuration File, can't enter the file name

Sven Hartge writes: > Ric Moore wrote: >> On 03/01/2015 12:55 AM, Csányi Pál wrote: > >>> I'm compiling a custom kernel for my Debian Wheezy operating system. >>> >>> In menuconfig when Load an Alternate Configuration File, can't enter >>> the file name. The cursor blinking in the field but can

Re: In menuconfig when Load an Alternate Configuration File, can't enter the file name

Sven Hartge writes: > csanyi...@gmail.com wrote: >> Sven Hartge writes: > >>> You don't need to be and you should not be logged in as root to >>> configure or compile a kernel. > >> Exactly. I know that. Still, the problem exist, regardless of what >> user ( none root or root ) start the menucon

Re: In menuconfig when Load an Alternate Configuration File, can't enter the file name

csanyi...@gmail.com writes: > Sven Hartge writes: > >> csanyi...@gmail.com wrote: >>> Sven Hartge writes: >> You don't need to be and you should not be logged in as root to configure or compile a kernel. >> >>> Exactly. I know that. Still, the problem exist, regardless of what >>> user

Recompiling debian kernel

onfig and here I set the module for Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter Then I execute make to build the kernel, and sudo make modules_install dpkg-buildpackage -us -uc -b -apowerpc but at these last step I get an error message: make[2]: Leaving directory `/home/csanyipal/Bub

Re: Wireless AP setup: RTL8188CUS

László Kohári writes: > Dear Pal, Dear Debian users, > > Did you able to find something with this problem? > I have an RTL8192CU, but I'm not able to m make it work. > > It's working as a client, but not as an Access point. > > If I try to start hostapd with minimal config I got the following: >

  1   2   >