claraocr

Hello! Why can I not to open the URL: http://www.claraocr.org in any browser? Maybe the project is death? -- Regards, Paul ->->-> Debian Junior Project :-) :-) :-) :-) :-) :-) :-) :-) :-) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL

DHCP & VPN

Hello! My client system is Debian Sarge, with eth0. It should to get IP address from DHCP server of my ISP. Up to now I use the static method to assign to eth0 the IP, but from 23. may will be the dhcp method in use. So I must to configure the system for that. I try to configure my system to use

Re: DHCP & VPN solved

On Fri, May 13, 2005 at 10:01:24PM +0200, csanyipal wrote: The following solved the problem: > - edit the /etc/dhclient.conf: request subnet-mask, broadcast-address, time-offset, domain-name, \ host-name, domain-name-servers; supersede router-discovery 0 -- Regards, Paul ->->-> D

Re: display resolution

On Wed, Jun 29, 2005 at 01:50:06PM -0700, [EMAIL PROTECTED] wrote: > >From another OS I know that a system here will display > at 1024 x 768 x 16. "startx" alone appears to produce > a > resolution of 640 x 480. The man page tells me how to > specify the color depth. Can the 1024 x 768 resolu

After upgraded to Buster the Energy Settings is problematic: get blank scree on laptop and the power off is only applicable

Hello, I just upgraded to Debian Buster from Stretch. I am running it on an Acer Aspire V3-571 laptop. I am using XFCE Desktop Environment ( in Stretch I used it also ). In the Energy ... Settings I did set up in Stretch that that after 3 minutes of inactivity the screen comes blank and it wo

After upgraded to Buster the Energy Settings is problematic: get blank screen on laptop and the power off button is the only way

Hello, I just upgraded to Debian Buster from Stretch. I am running it on an Acer Aspire V3-571 laptop. I am using XFCE Desktop Environment ( in Stretch I used it also ). In the Energy ... Settings I did set up in Stretch that that after 3 minutes of inactivity the screen comes blank and it

Re: After upgraded to Buster the Energy Settings is problematic: get blank screen on laptop and the power off button is the only way

2019. 08. 01. 9:14 keltezéssel, elvis írta: I just upgraded to Debian Buster from Stretch. I am running it on an Acer Aspire V3-571 laptop. I am using XFCE Desktop Environment ( in Stretch I used it also ). In the Energy ... Settings I did set up in Stretch that that after 3 minutes of inact

Re: After upgraded to Buster the Energy Settings is problematic: get blank scree on laptop and the power off is only applicable

2019. 08. 01. 12:44 keltezéssel, Shahryar Afifi írta: Do you have the package xfce4-goodies installed? xfce has its own power management. On Wed, 2019-07-31 at 21:38 +0200, Csanyi Pal wrote: Hello, I just upgraded to Debian Buster from Stretch. I am running it on an Acer Aspire V3-571 laptop

Why isn't Celestia in Debian Sarge?

Hello! My system is Sarge. I can't find Celestia among packages, but ssystem recommends Celestia. Why can't I find Celestia among debian packages? -- Üdvözlettel, Csányi Pál tanár http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.) http://csanyipal.info/moodle <<<--- Moodle -

mail delivery

Hello! I try to send a mail to Roberto but get the following error message: This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [EMAIL P

Re: mail delivery

On Mon, May 29, 2006 at 12:05:12PM -0400, Roberto C. Sanchez wrote: > Csanyi Pal wrote: > > > > I try to send a mail to Roberto but get the following error message: > > > > This message was created automatically by mail delivery software. > > > > A messa

Re: mail delivery

On Mon, May 29, 2006 at 06:11:15PM +0200, Csanyi Pal wrote: > On Mon, May 29, 2006 at 12:05:12PM -0400, Roberto C. Sanchez wrote: > > Csanyi Pal wrote: > > > > > > I try to send a mail to Roberto but get the following error message: > > > > > > T

apache2 - restrict download with password

Hello! apache2 version: 2.0.54 I would like to restrict download from my http server with password. How can I do that? Any advices will be appreciated! -- Regards, Csányi Paul http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.) http://csanyipal.info/moodle <<<--- Moodle - C

Re: apache2 - restrict download with password

Hello! On Sun, Jun 04, 2006 at 07:32:48AM -0400, Roberto C. Sanchez wrote: > Martin A. Brooks wrote: > > Csanyi Pal wrote: > > > >> Any advices will be appreciated! > > > > Add a section like this to your apache config file: > > >

Re: apache2 - restrict download with password

On Sun, Jun 04, 2006 at 02:00:00PM +0200, Martin A. Brooks wrote: > Csanyi Pal wrote: > >Now I don't know where to put in mine files to download? > >Can I put these files in ~/public_html/downloads/ ? > > If you want, yes. Just alter the virtual location to match. I

Re: apache2 - restrict download with password

On Sun, Jun 04, 2006 at 08:47:56AM -0400, Roberto C. Sanchez wrote: > >>Csanyi Pal wrote: > >> > >>>Now I don't know where to put in mine files to download? > >>>Can I put these files in ~/public_html/downloads/ ? > >> > >>If you wan

Re: apache2 - restrict download with password

On Sun, Jun 04, 2006 at 02:26:59PM +0200, Martin A. Brooks wrote: > Csanyi Pal wrote: > >I did so, and try to open or download a file in this directory, but > >nothing restricts to open it or download it. Why? > > Without seeing your configuration file, I have no ide

Re: apache2 - restrict download with password

> Date: Sun, 04 Jun 2006 17:38:50 +0200 > From: "Martin A. Brooks" <[EMAIL PROTECTED]> > To: Csanyi Pal <[EMAIL PROTECTED]>, > Debian-User > Subject: Re: apache2 - restrict download with password > > Csanyi Pal wrote: > > > >

Re: apache2 - restrict download with password - Solved

> > So would You please explain to me what is the virtual > > location? > > 'Virtual location' is a misleading term. What is meant is, > the URI with which you access the resource. > > As an example, On a fresh apache install, if you visit '/', > the URI is /, the real location is /var/www, > and

Re: mail delivery

On Mon, May 29, 2006 at 12:17:42PM -0400, Roberto C. Sanchez wrote: > Csanyi Pal wrote: > > > >>What are the contents of /etc/mailname? Does exim use it? > > > > The contents of /etc/mailname is: > > > > csanyipal.info > > > > How can

Re: Save to set folder with mutt

On Fri, Jun 09, 2006 at 02:01:29PM -0600, Joseph Smidt wrote: > I receive mail form debian-user and have always sent it to my > debian-user folder using "C" then deleting it from my inbox. Is there an > easier way to have all emails from debian-user sent to my debian-user > folder automatically af

Re: Save to set folder with mutt

> On 09/06/06 22:34 +0200, Csanyi Pal wrote: > > > Why don't use procmail? > > > > procmail can send your mails that come from debian-user list and send > > it to your debian-user mailbox, where you can find these as new > > messages with 'c'

mplayer-1.0pre8 install on Sarge - howto

Hello! I want to install MPlayer-1.0pre8 on Debian Sarge. I have downloaded .tar.bz2 I ask you: which is the preferred way to install it on Debian: whether with checkinstall or just with make install? Thanks for any advice! -- Regards, Paul Csányi http://csanyipal.info/moodle <<<--- Mood

Re: mplayer-1.0pre8 install on Sarge - howto

On Sat, Jul 08, 2006 at 03:18:24PM +0800, amateur wrote: > > I want to install MPlayer-1.0pre8 on Debian Sarge. > > > > I have downloaded .tar.bz2 > > > > I ask you: which is the preferred way to install it on Debian: > > whether with checkinstall or just with make install? > I remember the

application for editing videos

Hello! I have a small video that I can now to play in mplayer. Is there an application wherewith is possible to edit this video.wmv and cut parts from the video and save it in another file.wvm? Thanks for any advices! -- Regards, Paul Csányi http://csanyipal.info/moodle <<<--- Moodle - Cour

Re: networking crash suddenly in my home LAN

Andrei Popescu <[EMAIL PROTECTED]> writes: > On Wed,23.Jul.08, 13:31:13, Csányi Pál wrote: >> I have at home a small LAN with Debian GNU/Linux Etch boxes. >> >> The gateway/router can to access the internet but server and desktop >> can't. >> >> I have setup shorewall (iptables) on every three

Re: networking crash suddenly in my home LAN

Andrei Popescu <[EMAIL PROTECTED]> writes: > On Wed,23.Jul.08, 14:35:31, Csanyi Pal wrote: > >> Like I sed this problem is still here if I clear the iptables with >> 'shorewall clear' command. So I think this is not shorewall issue. > > If yo

Re: networking crash suddenly in my home LAN

"Brian McKee" <[EMAIL PROTECTED]> writes: > On Wed, Jul 23, 2008 at 8:35 AM, Csanyi Pal <[EMAIL PROTECTED]> wrote: >> >From desktop I can to open web page on my apache web server, but only >> with IP address: 192.168.2.100. If I try to access it with FQDN:

Re: networking crash suddenly in my home LAN

rules rules.gz Description: rules.gzH4sICCtHh0gAA3J1bGVzAJ1XzXLiRhA+j56ia8lhtwowYC8xW1upUkCslQJJ0ch2JTchxrGyQlIh -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm

Re: networking crash suddenly in my home LAN

Ron Johnson <[EMAIL PROTECTED]> writes: > On 07/23/08 08:46, Csanyi Pal wrote: >> "Brian McKee" <[EMAIL PROTECTED]> writes: >> >>> On Wed, Jul 23, 2008 at 8:35 AM, Csanyi Pal <[EMAIL PROTECTED]> wrote: >>>> >From desktop I

Re: networking crash suddenly in my home LAN

Andrew Sackville-West <[EMAIL PROTECTED]> writes: > On Wed, Jul 23, 2008 at 02:35:31PM +0200, Csanyi Pal wrote: >> Andrei Popescu <[EMAIL PROTECTED]> writes: >> >> > On Wed,23.Jul.08, 13:31:13, Csányi Pál wrote: >> >> I have at h

Re: networking crash suddenly in my home LAN

Alex Samad <[EMAIL PROTECTED]> writes: > On Wed, Jul 23, 2008 at 08:02:58PM +0200, Csanyi Pal wrote: >> Andrew Sackville-West <[EMAIL PROTECTED]> writes: >> >> > On Wed, Jul 23, 2008 at 02:35:31PM +0200, Csanyi Pal wrote: >> >> Andrei Popescu <

Re: networking crash suddenly in my home LAN

Alex Samad <[EMAIL PROTECTED]> writes: > On Thu, Jul 24, 2008 at 09:52:22AM +0200, Csanyi Pal wrote: >> Alex Samad <[EMAIL PROTECTED]> writes: >> >> > On Wed, Jul 23, 2008 at 08:02:58PM +0200, Csanyi Pal wrote: >> >> Andrew Sackville-West <[EMAI

Re: networking crash suddenly in my home LAN

Alex Samad <[EMAIL PROTECTED]> writes: > On Thu, Jul 24, 2008 at 09:52:22AM +0200, Csanyi Pal wrote: >> Alex Samad <[EMAIL PROTECTED]> writes: >> >> > On Wed, Jul 23, 2008 at 08:02:58PM +0200, Csanyi Pal wrote: >> >> Andrew Sackville-West <[EMAI

mixed (stable & sid) system - Dynamic MMap ran out of room

oblem with MergeList \ /var/lib/apt/lists/ftp.hu.debian.org_debian_dists_sid_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. E: Couldn't rebuild package cache How can I solve this problem? Any advices will be appreciated! -- Regards, Paul Csanyi http:

Re: mixed (stable & sid) system - Dynamic MMap ran out of room - SOLVED

Csanyi Pal <[EMAIL PROTECTED]> writes: > How can I solve this problem? I use Google and find a solution here: http://www.linuxquestions.org/questions/debian-26/ \ dynamic-mmap-ran-out-of-room-error-when-adding-new-apt-source-list-233417/ -- Regards, Paul Csanyi http://www.freewebs.c

Upgrading from Etch and a half to Lenny

aptitude dist-upgrade ?? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

recording and streaming in the same time, and then mixing - soundstudio app?

t audacity can't works together with another application that uses also soundcard. My goal is to stream the music and record my sough and then to mix theses together. How can I perform this task on my system? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs

Re: recording and streaming in the same time, and then mixing - soundstudio app?

Andrei Popescu <[EMAIL PROTECTED]> writes: > On Mon,11.Aug.08, 23:29:56, Csanyi Pal wrote: > >> My goal is to stream the music and record my sough and then to mix >> theses together. How can I perform this task on my system? > > I think you need jack or

Re: recording and streaming in the same time, and then mixing - soundstudio app?

Robin <[EMAIL PROTECTED]> writes: > 2008/8/11 Robin <[EMAIL PROTECTED]>: >> 2008/8/11 Csanyi Pal <[EMAIL PROTECTED]>: >>> Andrei Popescu <[EMAIL PROTECTED]> writes: >>> >>>> On Mon,11.Aug.08, 23:29:56, Csanyi Pal wrote: >>>&g

Installing realtime-lsm on Etch an a Half failed

success. I need this module to make some mixed audio files in realtime. How can I install realtime-lsm on my system? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of

Re: Installing realtime-lsm on Etch an a Half failed

Andrei Popescu <[EMAIL PROTECTED]> writes: > On Wed,13.Aug.08, 21:26:24, Csanyi Pal wrote: > > [...] > >> When I want to >> >> sudo aptitude install realtime-lsm >> >> I get the message: >> >> Loading Realtime Linux Security Modu

Re: Installing realtime-lsm on Etch an a Half failed

David Baron <[EMAIL PROTECTED]> writes: > On Thursday 14 August 2008 00:15:55 debian-user-digest- > [EMAIL PROTECTED] wrote: >> > On Wed,13.Aug.08, 21:26:24, Csanyi Pal wrote: >> >   >> > [...] >> > >> >> When I want to >> >>

Re: Installing realtime-lsm on Etch an a Half failed

Csanyi Pal <[EMAIL PROTECTED]> writes: > David Baron <[EMAIL PROTECTED]> writes: >>> > On Wed,13.Aug.08, 21:26:24, Csanyi Pal wrote: >> As long as you are compiling the kernel, get Ingo Mulnar's rt patch. > > Ingo Molnar's kernels can one down

Re: Installing realtime-lsm on Etch an a Half failed

Richard Hector <[EMAIL PROTECTED]> writes: > On Thu, 2008-08-14 at 23:11 +0200, Csanyi Pal wrote: >> Csanyi Pal <[EMAIL PROTECTED]> writes: > >> I did everything like I red here: >> http://www.rdegraaf.nl/index.asp?sND_ID=848152 >> >> After c

Re: Installing realtime-lsm on Etch an a Half failed

Csanyi Pal <[EMAIL PROTECTED]> writes: > Richard Hector <[EMAIL PROTECTED]> writes: > >> On Thu, 2008-08-14 at 23:11 +0200, Csanyi Pal wrote: >>> Csanyi Pal <[EMAIL PROTECTED]> writes: >> >>> I did everything like I red here: >>>

Re: audacity

, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

1 GB memory for Intel 845G Motherboard

Hello! Debian GNU/Linux Sarge, kernel 2.6.8, apache2, Moodle, sTeam, etc. This machine will be some day a server, but now I use it for Desktop too. :-) In the machine is Intel 845G motherboard and I will to buy 2 x 1 GB RAM for it. I browsed price lists & find just new memories. If I know whi

infos at packages installations

Hello! I deliberate thereon, that where can I find infos which appears at the time of package installation later, after installation has completed? If I can't do that, I must these informations copy and paste somewhere. When I copy and paste these informations from debconf surface, I run in a

apache2 - authentication in digest mode

Hello! apache2 - Server version: Apache/2.0.54 I setup everything from the apache2 doc for the usage of the Digest authentication methode, and I add some locations in the apache2.conf that should to be open only from some users with theirs passwords, Eg.: AuthType Digest AuthDigest

Re: Clamav scans or removes virus ??

On Wed, Aug 09, 2006 at 04:28:16PM +0200, Tomasz Chmielewski wrote: > Alejandro wrote: > > > >I have a Debian Sarge mail server with clamav antivirus, but I suspect > >it only scan for virus and don't remove them. > > > >Can you tell me if Clamav is just a virus scanner or if it can also > >remov

Re: apache2 - authentication in digest mode

Hello! > From: Simo Kauppi <[EMAIL PROTECTED]> > To: debian-user@lists.debian.org > Subject: Re: apache2 - authentication in digest mode > > I haven't used myself and I might not understand your > configuration (i.e. you probably have a good reason to use it :), but > if those directories are re

system-dependent variables

Hello! Where to find these system-dependent variables on my Debian Sarge system? Which command does call forth these variables? With which command can these variables to change? -- Regards, Paul Csányi http://csanyipal.info/moodle <<<--- Moodle - Course Management System http://csanyipal.inf

Re: system-dependent variables

> Where to find these system-dependent variables on my Debian Sarge system? > > Which command does call forth these variables? > > With which command can these variables to change? I installed on Sarge a new version of wmaker with ./configure && make && make install commands. Then, after a whi

Re: system-dependent variables

> > Where to find these system-dependent variables on my Debian Sarge system? > > > > Which command does call forth these variables? > > > > With which command can these variables to change? > > Can you be a bit more specific as to what you mean? Please see my e-mail (not the first but the seco

Re: system-dependent variables

On Tue, Aug 15, 2006 at 06:03:48AM -0500, Mumia W. wrote: > On 08/15/2006 05:29 AM, Csanyi Pal wrote: > >>Where to find these system-dependent variables on my Debian Sarge system? > >> > >>Which command does call forth these variables? > >> > >>

Re: system-dependent variables

On Tue, Aug 15, 2006 at 01:25:49PM -0400, cga2000 wrote: > On Tue, Aug 15, 2006 at 06:29:34AM EDT, Csanyi Pal wrote: > > > Where to find these system-dependent variables on my Debian Sarge system? > > > > > > Which command does call forth these variables? > > &

Re: system-dependent variables

On Tue, Aug 15, 2006 at 04:13:13PM -0400, cga2000 wrote: > > Well, I was removed any GNUStep/ directory, the /etc/GNUStep/ and the > > $HOME/GNUStep/ and after that try to install pre-compiled (not the > > self-compiled) wmaker. Still it is not perfect, WPrefs can't find his > > icons. > hmm..

Re: system-dependent variables

> Keep in mind that you removed all files that _looked_ like they were > wmaker/wprefs files. IOW, the above-method should work but it's not > 100% foolproof. I did so, and still have this error. > And when you start WPrefs.app .. You're not getting any error messages > .. something that might t

Re: system-dependent variables

On Wed, Aug 16, 2006 at 10:54:14AM -0700, Jeff D wrote: > if you are using debs, try to remove it, apt-get update && apt-get > remove --purge wmaker && apt-get install wmaker I use synaptic, and I purge a couple times wmaker regular sarge version and install it again. > any error messages shou

Re: system-dependent variables

On Wed, Aug 16, 2006 at 12:50:58PM -0400, cga2000 wrote: > > > > > Did you try starting WPrefs from a shell prompt -- rather than clicking > > > on an icon..? There might be useful messages there. > > > > Yes, but get only this like error message: > > "WPrefs warning: could not locate image fil

Re: system-dependent variables

On Wed, Aug 16, 2006 at 11:46:51AM -0700, Jeff D wrote: > >>if you are using debs, try to remove it, apt-get update && apt-get > >>remove --purge wmaker && apt-get install wmaker > I don't use synaptic, but a apt-get install --reinstall wmaker should > fix that, I'm not sure what the synaptic m

Re: system-dependent variables

On Wed, Aug 16, 2006 at 04:56:43PM -0400, cga2000 wrote: > > > >>if you are using debs, try to remove it, apt-get update && apt-get > > > >>remove --purge wmaker && apt-get install wmaker > > > > > I don't use synaptic, but a apt-get install --reinstall wmaker should > > > fix that, I'm not sur

Re: system-dependent variables

On Wed, Aug 16, 2006 at 03:03:39PM -0700, Jeff D wrote: > >>>How may this happen that the tiff image format is not supported on my > >>>system? > >>>I have installed these packages for tiff: > >>>libtiff4 3.7.2-7 Tag Image File Format (TIFF) library Sorry for my mistake! I have libtiff4

Re: system-dependent variables

On Wed, Aug 16, 2006 at 06:18:50PM -0400, cga2000 wrote: > > Supported image formats: XPM PPM PNG JPEG > > And now, when there are these .tiff images, WPrefs can't load these > > .tiff images, because wmaker Version 0.91.0 not support tiff images. > Your version of wmaker does not support the .

Can't do security updates in aptitude for 3 packages

Hi, my system is Debian GNU/Linux Lenny with linux-image 2.6.26-2-486. When I run: $ sudo aptitude and did update I get that there is three packages for sevurity updates available. When I hit 'g' to did security updates I get message: --\ Packages being automatically held in their current st

Re: Can't do security updates in aptitude for 3 packages

Siggy Brentrup writes: > On Wed, Jul 29, 2009 at 11:49 +0200, Csanyi Pal wrote: >> Hi, >> >> my system is Debian GNU/Linux Lenny with linux-image 2.6.26-2-486. >> >> When I run: >> >> $ sudo aptitude >> >> and did update I get that

USB Ethernet adapter and pegasus hang the computer?

Hi, My system is Debian GNU/Linux Lenny with linux-image 2.6.26-2-486 on an old Toshiba laptop 'Satellite 2540CDS'. I love it! I'm using USB2.0 Ethernet adapter to connect to the Internet. The box is on LAN at my home. I'm using cable modem to connecting to the Internet. There is kernel modules

How to make from source debian package?

Hi, the gnustep packages are very old when installed from the official repositories so I wish to make debian packages from sources: tarballs, or SVN to make the fresh gnustep debian packages for the Lenny. By the way I wish to translate it to Hungarian too. When I get sources with 'apt-get sourc

Re: How to make from source debian package?

Brian writes: > On Wed 29 Jul 2009 at 16:00:16 +0200, Csanyi Pal wrote: > >> the gnustep packages are very old when installed from the official >> repositories so I wish to make debian packages from sources: >> tarballs, or SVN to make the fresh gnustep debian packages

/dev/usb/hiddev0 - linux-image-2.6.26-2-486

Hi, I want to use this software: http://openprog.altervista.org/op.tar.gz to use this hardware: http://openprog.altervista.org/ I must to have /dev/usb/hiddev0 so the 'op' software can to do job. I'm using linux-image-2.6.26-2-486. I'm try to load the kernel module usbhid but that don't creat

[OT] Can't open .po file in Emacs po-mode

Hi, My system is Debian GNU/Linux Lenny. I have installed GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11) of 2008-11-09 on raven, modified by Debian, and gettext-el Version: 0.17-4. I have edited .emacs file with lines: (setq auto-mode-alist (cons '("\\.po\\'\\|\\.po\\." . po-mode)

application like iPhoto on Debian GNU/Linux Etch?

Hi, is there an application on the Debian GNU/Linux Etch like iPhoto on the Mac OS X operating system? With it one can to import some rendered images and make a movie with the File / Export command. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE

urxvt on Lenny?

Hi, I have just installed Lenny and can't find urxvt. Where it is? :) -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Upgrading from Etch to Lenny - aptitude ERROR

I try to use apt-get: apt-get update I get the same error message: Illegal instruction What can I do to solve this problem? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "u

Re: Upgrading from Etch to Lenny - aptitude ERROR

Daniel Burrows writes: > On Sun, Feb 22, 2009 at 11:39:51AM +0100, Csanyi Pal > was heard to say: >> When I try to use apt-get: >> >> apt-get update >> >> I get the same error message: >> >> Illegal instruction >> >> What can I d

Re: Upgrading from Etch to Lenny - aptitude ERROR

Daniel Burrows writes: > On Sun, Feb 22, 2009 at 09:06:48PM +0100, Csanyi Pal > was heard to say: >> i386, >> >> CPU AMD K6 > > I realized later that "cat /proc/cpuinfo" would also be useful. processor : 0 vendor_id : AuthenticAMD cpu f

Re: Upgrading from Etch to Lenny - aptitude ERROR

Csanyi Pal writes: > Daniel Burrows writes: > >> On Sun, Feb 22, 2009 at 09:06:48PM +0100, Csanyi Pal >> was heard to say: >>> i386, >>> >>> CPU AMD K6 >> >> I realized later that "cat /proc/cpuinfo" would also be useful.

Re: Upgrading from Etch to Lenny - aptitude ERROR

Daniel Burrows writes: > On Mon, Feb 23, 2009 at 09:09:47PM +0100, Csanyi Pal > was heard to say: >> How can I find the package libapt-pkg-libc6.3-6-3.11 to download it >> and install it with dpkg? > > That's a virtual package provided by apt. You need to i

Re: Upgrading from Etch to Lenny - aptitude ERROR

Csanyi Pal writes: > Daniel Burrows writes: > >> On Mon, Feb 23, 2009 at 09:09:47PM +0100, Csanyi Pal >> was heard to say: >>> How can I find the package libapt-pkg-libc6.3-6-3.11 to download it >>> and install it with dpkg? >> >> That&#

aptitude error on Lenny

n Etch system on this box. Does it mean that that I can't to install Lenny on this box at all? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

.Xmodmap and gdm

://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: .Xmodmap and gdm

Tzafrir Cohen writes: > On Sun, Mar 08, 2009 at 09:44:16AM +0100, Csanyi Pal wrote: >> Hi, >> >> I use GNOME and gdm. >> >> I try to use ~/.Xmodmap to load my settings for the XKeyboard. >> >> In the file: >> /etc/gdm/PostLogin/Default >

Re: Lenny won't install on an old Pentium that used to run Etch.

h this works fine. What can be the problem here? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

How can I install mencoder on Lenny?

://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: mouse and gpm

I do to configure the > mouse? sudo dpkg-reconfigure gpm -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: How long will updates to Etch be available?

do take time to plan and test your update cycle > appropriately, don't wait until the last day. > > Sjoerd But I have on my Pentium I or II (?) PC box a Debian Etch that I can't to upgrade to Lenny because of this bug (?): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517

Re: regarding upgrade

Lenny Jaan writes: > How do I get rid of other 2 entries from the boot screen ? sudo aptitude purge linux-image-2.6.26-1-686 or so. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject

Re: How long will updates to Etch be available?

Bob Cox writes: > On Mon, Apr 20, 2009 at 12:15:22 +0200, Csanyi Pal > (csanyi...@gmail.com) wrote: > >> Sjoerd Hardeman writes: >> >> > Siju George wrote: >> >> Hi, >> >> >> >> I understand that Once a release is made u

What hardware to use for Debian Firewall/Gateway or server?

r the server.. What is the recommended new hardware for firewall/gateway or for a web, mail, file & printer server at a small home network? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-

Printing with Gutenprint failed: lp: The printer or class was not found.

/cups restart command. What is the problem? How can I resolve it? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble?

Re: What hardware to use for Debian Firewall/Gateway or server?

Jan Willem Stumpel writes: > Csanyi Pal wrote: > >> What is the recommended new hardware for firewall/gateway or >> for a web, mail, file & printer server at a small home network? >> >> Any advices will be appreciated! > > I am now using a "

Re: What hardware to use for Debian Firewall/Gateway or server?

Alex Samad writes: > On Thu, May 28, 2009 at 08:35:02AM +0200, Csanyi Pal wrote: >> Jan Willem Stumpel writes: >> >> > Csanyi Pal wrote: >> > >> >> What is the recommended new hardware for firewall/gateway or >> >> for a

Re: What hardware to use for Debian Firewall/Gateway or server?

Jan Willem Stumpel writes: > Csanyi Pal wrote: > >> So: can one install on it say a Debian GNU/Linux Lenny? > > Mind that it is a "headless" device. Everything has to be done > through ssh (or local telnet). It has no cd-rom drive, keyboard, > or monitor. B

Networking suddenly don't works (cdc_ether)

;eth*", NAME="eth0" then I restart the udev: /etc/init.d/udev restart and restart the networking: /etc/init.d/networking restart but can't get the interface eth0 and the networking don't works. I try to reinstall udev package too but that don't helps. How can I

Re: house planning software

motion-picture-quality animation with RenderMan-compliant render engines (such as aqsis). -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: Unicode recommendations in a terminal - Please advise.

Chris Jones writes: > Wondering if anyone has some multilingual experience with terminal-based > applications such as mutt for mail, text-mode browsers - ELinks here... > irc clients, etc. and would be able to provide some advice. I'm using the Urxvt terminal. aptitude show rxvt-unicode RXVT-li

Re: Upgrade of Etch to Lenny Broke System

Rustam writes: > On Sun, 2009-07-05 at 12:34 +0900, Osamu Aoki wrote: >> Hi, (funy typo happened) >> >> On Sun, Jul 05, 2009 at 11:15:41AM +0900, Osamu Aoki wrote: >> > Hi, >> > >> > On Sun, Jul 05, 2009 at 03:44:23AM +0200, Ogya Chief wrote: >> > > >> > > Hello All, >> > > In the process of u

Re: Resizing partitions on production environment

Daniel Suleyman writes: > Dear all, i have big issues. > I've installed lenny on my server, installed all programs and ran it > on production, ut now i need to install oracle on it. > and oracle wont install becouse my root partition have less size > that oracle need. how I an resize my partitio

To build debian packages from source

Hi, what is the best tool to build debian packages from source that one have downloaded with apt-get source package-name and changed the downloaded source? -- Regards, Paul Chany -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Conta

  1   2   3   4   5   >