it, it didn't unload (modprobe -r) module, so it
doesn't load it again (and so, not launch my post-install script) :(
so is someone knows how to unload module when card is unplug ? or knows
how hotplug can manage this ?
thanks by advance,
Alexandre
PS : if someone wants to know more d
_NAME = $PCI_SLOT_NAME"
echo "modprobe -r ndiswrapper"
} >> $REMOVER
chmod +x $REMOVER
return 0
}
case "$ACTION" in
add)
setup_remover
;;
esac
exit 0
--end--
thank you ! I will try this
Alexandre
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
to eth1394 and eth1
to 8139too, thing I don't want (different from my configuration in
/etc/network/interfaces)
even if I comment the line with eth1 that's always the same !
is there another place where to setup interfaces and modules ?
thanks for all answears !
Alexandre
--
T
/
dpkg-buildpackage
cd ..
dpkg -i bluez-utils.deb
?
Thanks for help.
--
Alexandre Delanoë
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
To activate bluetooth, you need a paperclip (trombone) each time you
want to see it with hcitool scan.
^^
Then "hidd --connect $KeyboardBluetooth_ADRR" works (tried as root)
After that, I need xmodmap and xev to configure it whith my own
language.
(hard with a broken arm ;)
--
ut commands can be easily understood)
Cheers,
--
Alexandre Delanoë
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20120827081236.ga28...@delanoe.org
[Subscribed to the list, I do not need cc, thanks]
En l'an 2012, le lundi 27 août, vers 15 h 10 mn, J. B écrivait:
> On Mon, 27 Aug 2012 10:12:36 +0200
> Alexandre wrote:
>
> > En l'an 2012, le lundi 20 août, vers 20 h 23 mn, J. B écrivait:
> > > Is there a
hi
i'm trying to install php4.
when o dp "apt-get install php4" i get the following error:
Sorry, but the following packages have unmet dependencies:
php4: Depends: libbz2-1.0 but it is not going to be installed
Depends: libc6 (>= 2.2.4-4) but it is not going to be installed
Dep
Hi,
i make java aplications for mobile phones.
i used to use jbuilder + mobileset(windows), but i want to leave win for
good.
So i tried to install some ide (sun1studio).
i installed j2sdk1.4.0:
$ java -version
java version "1.4.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0
w. i just start the
program and when it's fully loaded i just close it.
i had my locales to pt_PT but changed them to en_US. The result didn't
change.
Thanks you.
Joel
Derrick 'dman' Hudson wrote:
On Fri, Mar 14, 2003 at 01:20:47AM +, Joel Alexandre wrote:
| i installed
FIXED :) :)
since google is our friend,
i added DefaultFbBpp 32 to XF86Config-4 in the screen section.
it worked fine :-D
thanks
Joel Alexandre
Derrick 'dman' Hudson wrote:
On Fri, Mar 14, 2003 at 01:20:47AM +0000, Joel Alexandre wrote:
| i installed j2sdk1.4.0:
[.
i have the same problem. With kdm, xfce4 doesn-t start. but with gdm
there is no problem.
>Hi,
>
>I tried out the latest xfce4, and it's pretty cool. One of the best
>desktops around. I want it to run under kdm, but so far I could not
>figure out how to do it. Any one tried that? Any help in
can someone please tell me why this is happening?
apt-get update;
Reading Package Lists... Error!
E: Dynamic MMap ran out of room
E: Dynamic MMap ran out of room
E: Error occured while processing courier-ssl (NewVersion1)
E: Problem with MergeList
/var/lib/apt/lists/tux.cprm.net_debian_n
open it but it doesn't show anything. maybe it's some permission
problems, but i don't know what to change. As root kmix works perfectly.
could someone help. thanks
Joel Alexandre
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
error help me in this challenge.
See ya
Alexandre Passito
MSN Hotmail, o maior webmail do Brasil. Faça o seu agora.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello,
I have a SB PCI 64 too. I tried to use es1370 support but it didn't work.
I compiled the es1371 support and now the card plays well.
Thanks Ian for that tip.
--
De :Ian Keith Setford[SMTP:[EMAIL PROTECTED]
Date d'envoi : mardi 23 mars 1999 15:36
A : Tuv- OK!
Cc :debian-
Hello,
I'd like to make multi session on CDs. I use cdrecord et mkisofs and I saw an
option named multi in cdrecord but I don't see HOWTOs talking about this.
Does somebody do it successfully ?
Thanks,
Alexandre Devaure
Hello
To start a program with an xterm, you need to use the -e option:
xterm -e .
I am sorry my PC at office run m$ os but it's changing : our system
administrator want to use Linux boxes first to read mail and then as file
server.
Alexandre Devaure
--
De :Christian Dysthe
Hi,
I want to know how to set rules for ip accounting
with kernel 2.2.12 with ip firewalling enabled ...
and monitor what come inside from my lan computers
and outside eth0 whithout looking at
the lan trafic on eth1 . and statistics on each
computers
TIA
Alexandre
the line is
none /proc proc defaults 0 0
Alexandre Devaure
--
De :Angus Claydon[SMTP:[EMAIL PROTECTED]
Date d'envoi : jeudi 22 avril 1999 18:40
A : debian-user@lists.debian.org
Objet : proc line in fstab
Could anyone who's online just now let me know what the
comment out it.
When the script /etc/init.d/xdm runs, it tests the presence of xdm-start line.
If it doesn't find it, it doesn't launch xdm.
Alexandre Devaure
--
De :Krosigk, Lorenz Von[SMTP:[EMAIL PROTECTED]
Date d'envoi : vendredi 30 avril 1999 12:23
A :
Hi,
The command as86 is not found so
the directory of as86 is not in your PATH (I don't think so)
or (probably) the package bin86 is not installed on your system
Alexandre Devaure
--
De :mel[SMTP:[EMAIL PROTECTED]
Date d'envoi : mercredi 5 mai 1999 12:39
A : d
ither socket(), bind() or connect()). When
getting such a soft error (EAGAIN), Amanda could keep retrying.
Patches are welcome :-)
--
Alexandre Oliva http://www.dcc.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
{oliva,[EMAIL PROTECTED] [EMAIL PROTECTED],computer.org}
[EMAIL PROTECTED],kaffe.org,{egc
Hi!
I was running Redhat but I just bought Debian 1.3.1 Cd. I want
to be able to install it from the CD but I can't mount my CD. Its and
Creative labs 4x ide cdrom connected on my sound card. I know that if I
plug it on the same IDE as my HD it should work perfectly but my HD IDE
cable
tests of installation from scratch were needed, but it's perhaps
too late. I wait an hour or three for responses and I begin.
Alexandre
better place to post this, but I hope it will go
to the right persons.
Don't hesitate to reply. I spent several hours to install (and download),
I can take a few minutes to read mail.
In hope this is usefull,
Alexandre
Packages.frozen
just after downloading the package list. (Before dselect reads it !).
I used this only at installation time, but it worked perfectly.
Hope this helps,
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
u should be fine. That's how I installed bo. (frozen).
Alexandre
On Wed, 16 Apr 1997, Pete Harlan wrote:
> Hi,
>
> In trying to upgrade a 1.2.x system to 'frozen' (to see if this would
> fix my "I can't receive smtp email from a M$ Exchange-based site&qu
s the master on the first interface, ( C: )
hdb - slave --, ( D: )
so I suppose the next is hdc
the number is for the partition. As there is only one in a cd-rom, it
sould be 1.
Oops, I checked the Linux File System Standart, and it says
/dev/hdc (master cdrom on the second i
**Highly** recommand that you recompile it anyway.
For me that spares 400 KB of memory, avoids hangs and warnings at boot time.
(there is still a lot of non-modules drivers in).
Alexandre
On Thu, 17 Apr 1997, Geoff R Deasey wrote:
> I was about to recompile the kernel to add support for
I saw a warning that some problem had happened with the lists and that the
users should RE-subscribe.
did you try that ?
At least I was unsubscribed from here and subscribed to debian-changes.
Hope this help.
Alexandre
On Sat, 19 Apr 1997, John Foster wrote:
> Hmmm
>
> Somet
486, so I don't know much about these
problems... I find it interesting, that's all.
BTW, why all this memory ? Is it always for network services, or could it
be useful for desktop computers too ?
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
server
is ethernet. But what are 5MB of disk space ? (< $1) .
Now if the proxy crashes I still have my cache ( he, he).
Thank you Brian. While you're at it, is it normal that nescape continaly
complains : 'cannot convert string 'FALSE' to type boolean' ?
Does anyon
here it is :
http://sysdoc.pair.com/
Alexandre
On Sat, 19 Apr 1997, Karl M. Hegbloom wrote:
> Dima> think) can cache >64M. Tom's hardware guide is a good place
> Dima> to read all about it.
>
> Could you send up the URL? I've lost it, it seems
this problem with slackware, but at this time I was
about to change to ELF so I reinstalled from scratch.
Now I have a brand new debian and I want to understand what's happening.
Any help appreciated.
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe"
, and everything is
alright. Did you recompile your kernel ?
Alexandre
On Sun, 20 Apr 1997, LinuxBOX wrote:
> Thanks for the help. I tryed that and it didn't seem to work. Perhaps if
> I included more information it would be easier to diagnose. If I don't
> physicla turn the ma
I tried with your conf file,
I installed wu-ftpd.
Nope, there is another problem
thank you for trying. And perhaps it works for other ..
Alexandre
On Sun, 20 Apr 1997, Brandon Mitchell wrote:
> Sorry I deleted the orig message but I just noticed that I was having the
> same ftp p
Thank !
It was that.
But the file is neither in the base file (base1_3.tgz) nor in base-passwd.
(on ftp.debian.org)
Are you sure this gets corrected soon ? Else it should be
reported.
bye,
Alexandre
On Sun, 20 Apr 1997, Christian Meder wrote:
> On Apr 20, Alexandre Lebrun wrote
&g
The base distribution for bo does not include the file
/etc/shells , that defines the authorized login shells
That causes ftpd to reject the users (they don't have a qualified login
shell).
Thank you all for your help !!
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the
uld have complained !!
I hope this will help you.
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble?
e-mail to [EMAIL PROTECTED] .
entries get
run regularly if you shut down at night.
Alexandre
On Mon, 21 Apr 1997, Jim Pick wrote:
>
> > > It is one of the removal scripts of CVS, *DO NOT* remove cvs as it will
> > > wipe
> > > inetd.conf :(
> > >
> >
> > Only to clarify th
anacron came with bo. (the next distribution, currently beta)
search in frozen/binary-i386/admin
I don't verify because I got kernel problems. But you should find it there.
Alexandre
On Tue, 22 Apr 1997, Robert D. Hilliard wrote:
> On Tue, 22 Apr 1997 you wrote:
>
> > T
50.254
ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
route add -net ${NETWORK}
[ "${GATEWAY}" ] && route add default gw ${GATEWAY} metric 1
I don't know if there is a facility to configure it after installation.
But vi (or even ae ) is already a good too
Hi.
I use gnuplot 3.5beta6.328-1 , with a bo install.
By me the following problem does not appear.
( the curve is smooth for x < 27 )
So it's probably not a 'linux' problem, but an installation issue.
Alexandre
On Sat, 26 Apr 1997 [EMAIL PROTECTED] wrote:
>
> I did try
On Sat, 26 Apr 1997 [EMAIL PROTECTED] wrote:
> Where can I get A FILTER to stop SPAM
>
> Jorge
Hoye ..
If the spam can be detected by looking at the mail header (ie the From:
field, the Subject: , etc.), it is possible with procmail.
procmail will analyse your mail following rules you give it
have
> no clue.
>
> --
> Rob
I think rtc is for Real Time Clock
It was an option for kernel configuration.
I don't know what it is exactly, but the help said that you don't need it
if you don't know what it is.
It could interfere or be buggy. Try without.
That
l ?)
Execpt emacs, that don't follow the rules, as ever.
I simply put a
;; Use european character set
(standard-display-european 1 )
in my .emacs
> Thanks a lot.
De nada
>
> ---
> Willi Schiegel
> [EMAIL PROTECTED]
> ---
Ale
-You can safely try to deselect them. deselect tells you if it breaks
other packages. Then you hit 'x' and keep the package.
But that's slow and will take more than an hour.
Just a suggestion.
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "uns
e a problem. debian is very robust.
but its way of installing X is confusing.
then you run xf86config. If you manage to respond to its questions, it
will even tell you which server you must use (apparently xserver_svga).
Good luck,
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the w
.o and depends on 8390.o)
any hint appreciated
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Fixed it myself. Perhaps I asked too early.
I stupidly added a '8390' line in /etc/modules, that cause ne to fail.
strange but my fault.
Thank you markus. I didn't know dmesg. Better than to decompress mp2 files
during bootup to slow things down (what I did).
Alexandre
On T
on a small partition (I would not need X).
But it's probably more fun the complicated way.
other: I could get an 2nd IP address or use masquerading. I think a 2nd
IP is easier, and we still have some on the subnet. Any comments ?
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mai
LIST ACTIVE done only 4482 seconds ago, skipping
The directories for the newsgroup exist and are empty.
in intesting.groups are empty files corresponding to the newsgroups.
What did I miss ?
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[
Alexandre
On Sat, 31 May 1997, Nathan E Norman wrote:
> Ok, perhaps I'm dreaming, but I thought fdos was in frozen at one time.
> Now it's not ... I see that it's in unstable though ... this isn't a big
> deal as I'm just setting up a machine to play around w
won't work. Some can pcl, but they often
don't have enough memory (pcl files are bigger than ps, I believe).
for ghostscript, see http://www.cs.wisc.edu/~ghost/index.html
Alexandre
On Mon, 2 Jun 1997, Alex Yukhimets wrote:
> Hi folks.
>
> Could anyone tell me which one of
install the 'recode' package
and use it like this :
recode ibmpc:latin1 YourTextFile
Bye,
Alexandre
On Thu, 5 Jun 1997, Curt Howland wrote:
>
> Somewhere in the dank recesses of my mind, I recall
> a utility that would strip the extra ^M's from a
> text file cop
On Wed, 4 Jun 1997, Rick Morrison wrote:
> Just installed Debian 1.3. Am a UNIX newbie as well as a Debian newbie.
> It's up and running but
>
Great, a new user !
> 1. Can't TELNET in to the system running it. Sez 'connection refused'.
> Can't even telnet into itself! TCP/IP
On Thu, 5 Jun 1997, Timothy Phan wrote:
...
> Secondly, would some one please point me to the doc./pointers to
> setup the Debian system to download the news onto my local drive
> for later use? Thanks!
>
Try leafnode, there is a debian package in section new
F86Config' is your friend, too.
Alexandre
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
have this
problem (they treat both DEL and Backspace as 'backspace' ).
Is there a cure ?
I also would like to be able to type deadcircum within xemacs, but that
is another problem. BTW, is there a debian package for xemacs ?
Thanks.
Alexandre
--
TO UNSUBSCRIBE FROM THIS
le contrib main
deb cdrom:[Debian GNU/Linux 3.1 r0a _Sarge_ - Official i386 Binary-1
(20050607)]/ unstable contrib main
deb http://security.debian.org/ stable/updates main contrib non-free
--
Alexandre Irrthum, Ph.D.
Section of Cancer Genetics
Brookes Lawley Building
Institute
HITMAN wrote:
>
> Hello Dear DEBIAN team, i want to ask you from where i can download
> your ISO file [the newest ver. of DEBIAN linux] :)))
Check http://cdimage.debian.org/
Alex.
--
Alexandre Fornieles | F-40150 Hossegor
ICQ : 1519880 | Debian GNU/Linux 2.2.13 i686
-
Newbie alert. I'm new to linux and am having issues.
_X11TransSocketUNIXConnect: Can't connect: errno = 111
Please HELP... What am I missing?
This is during initial configuration after installation reboot.
I clicked YES to "Do you want to create the XFree86 configuration file?"
If t
I have a msi motherboard with via kt133 and via686b chipset.
I have a lots of problem when trying to rip music from the dvdrom and
the cdrom,
the computer says 'lost of interrupt'.
I try other programs, other distributions, nothing change.
What do you think about this? please, is there some one k
hi,
i've just discovere apt-build.
it works with some packages and with other it doesn't.
example. xine-ui worked fine.
gaim and mozilla i just get this error:
apt-build --reinstall install mozilla
-> Installing build dependencies (for mozilla) <-
Reading Package Lists... Done
Building D
xbox, xmms, gkrellm ,xine-ui and it worked.
i doesn't work (until now) with mozilla, gaim and openoffice.org
Bijan Soleymani wrote:
On Wed, 2003-06-25 at 09:29, Joel Alexandre wrote:
hi,
i've just discovere apt-build.
it works with some packages and with other it doesn't.
example.
string, "You have been R00ted");
sleep (8);
xosd_destroy (osd);
exit (0);
}
how can i get osd/osd_cat to work? To just show something...
thanks
Joel Alexandre
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ot;You have been R00ted");
sleep (8);
xosd_destroy (osd);
exit (0);
}
how can i get osd/osd_cat to work? To just show something...
thanks
Joel Alexandre
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi
Hello
I Read a message you posted last year , and I have the same problem.
If I use xdm or startx, fvwm crashes with an error about font loading. It only works
with gdm.
Even if I launch an xterm, and than call fvwm, it dies with the same error.
Did you solve the problem?
Do you have an answ
Hi,
[...]
> Jan 11 15:22:55 dhanna systemd-nspawn[21268]: Failed to create
> /init.scope control group: Operation not permitted
[...]
> Then I try it with
>
> debootstrap --variant=minbase --include
> systemd,vim,libterm-readline-gnu-perl,iproute2,dialog,dbus stretch
> /var/lib/machines/foo
>
>
Hi,
> $ sbuild-createchroot --chroot-mode=unshare --make-sbuild-tarball ~/.cache/
> sbuild/unstable-amd64.tar.gz unstable $(mktemp -d)
> https://deb.debian.org/debian/
> [...]
> If I understand well, it is a Perl script that tries to execute some
> 'newuidmap' command that is part of the uidmap p
Hi,
> In this case, Richard seems to be looking for analysis of the
> web server logs he has already collected.
>
> analog
> awfful
> awstats
> goaccess
> logstalgia
> logswan
> visitors
> webalizer
analog, awfful, awstats, visitors and webalizer seem unmaintained.
logstalgia is an Xorg app tha
Le dimanche 11 juillet 2021, 22:58:55 CEST Polyna-Maude Racicot-Summerside
a écrit :
> Hi,
>
> > Whatever, the use of controversial words in publicly visible code is
> > not an indication of a professional attitude. Overdoing juvenile
> > enthusiasm for provocation might lead to a result like wit
Le mardi 13 juillet 2021, 14:01:58 CEST Celejar a écrit :
> On Tue, 13 Jul 2021 11:54:43 +0300
>
> Reco wrote:
> > Hi.
> >
> > On Tue, Jul 13, 2021 at 09:20:12AM +0200, to...@tuxteam.de wrote:
> > > > > Working for free.
> > > >
> > > > Yes. This aspect was always annoying to Microsoft and
Le mardi 13 juillet 2021, 20:00:44 CEST Celejar a écrit :
> On Tue, 13 Jul 2021 19:28:39 +0200
> Alexandre Garreau wrote:
> > Le mardi 13 juillet 2021, 14:01:58 CEST Celejar a écrit :
> > > On Tue, 13 Jul 2021 11:54:43 +0300
> > > Reco wrote:
> > > >
Le mardi 13 juillet 2021, 16:09:50 CEST Celejar a écrit :
> On Tue, 13 Jul 2021 16:08:53 +0300
>
> Reco wrote:
> > On Tue, Jul 13, 2021 at 08:01:58AM -0400, Celejar wrote:
> > > > Github (Gitlab, Sourceforge, etc) were and are non-free (as in -
> > > > non-gratis) services, so it's only reasonabl
Hello,
Will trying to install OpenQA on Debian, I discovered a bugs opened on
bugs.debian.org.
I tried to make the driver, it's seem to work but i've been stuck, how i
can help DD on this paquages, it's been 5 years old now.
Thanks
Le 2019-05-20 16:16, Jim Popovitch a écrit :
Is there a VPN endpoint client that works with "CheckPoint EndPoint
Security VPN". I have been assigned an IP address of the VPN server, a
username, and a password. Vpnc seems to think I need a Group name and
password, and won't accept leaving them b
Hi,
For the container I need a static address, I know in can be configured
on container side.
Is there a way to do this config only on host side?
Edit a file to bind mac address and ip for example.
Like kvm network or "real" dhcp can do?
There does not seem to be any other option than running a
Hi,
> I want to use adminer for php operations. I installed it via apt install
> adminer.
> But I am not able to open it on localhost. Can anyone help me?
You must also install and setup a php-enabled web server for it to work.
The simplest way to get it running is:
$ cd /usr/share/adminer
$ php
> > You must also install and setup a php-enabled web server for it to
> > work.
> >
> > The simplest way to get it running is:
> > $ cd /usr/share/adminer
> > $ php -S localhost:8000
> >
> > and you'll find adminer at http://localhost:8000/adminer/
> >
> > (There are many other ways to run a ph
Hi,
> In ipchains, there were a lot of modules that I used a few of, like
> recent and the one that put comments on the end of a rule. I can't find
> anything, one way or the other, discussing these add-ons with nft.
>
> Is there such a thing in nft? Is nft so new that they just haven't been
> wr
Hi,
> I installed adminer in debian 10 by sudo apt install adminer.
> Now I am unsure how to use it on web browser. Note I installed LAMP and
> already run a local setup for Wordpress.
If your LAMP webroot is /var/www/html do, one way is to do the following.
$ ln -s /usr/share/adminer/adminer /v
Hi,
> > I see that apt-offline is not part of buster. Is there any plan to add it?
>
> Only the maintainer would know about that. It is unlikely he reads this
> list.
https://bugs.debian.org/871656 is what keeps apt-offline out of testing
and thus stable.
Alex
Hi,
> >> Playing: http://direct.franceinfo.fr/live/franceinfo-midfi.mp3
> >> (+) Audio --aid=1 (mp3 1ch 44100Hz)
> >> ALSA lib pcm_dmix.c:1108:(snd_pcm_dmix_open) unable to open slave
> >> [ao/alsa] Playback open error: Device or resource busy
> >> [ao/oss] Can't open audio device /dev/dsp: Devic
Hi,
> I am using Postfix. (Postfix, OpenLdap, Dovecot, Squirrelmail) My goal
> is to synchronize contacts and calendars. I have to do ActiveSync for
> this. How can I resolve ActiveSync ? Is there an open source solution
> ?
Postfix does not support this.
ActiveSync is a Microsoft protocol. If y
Hi,
> > since I am not well educated about macvlan, ipvlan, I could not get the
> > networking working at all. I would like to avoid using
> > "systemd-networkd/systemd-resolvd" especially on the Buster host - using
> > those
> > it seems should make everything work automagically.
>
> If you rea
Hi,
> Before anyone asks, i've looked all over the wiki and every other post online
> so i'm not sure why this isn't working. When I start up my machine X starts
> up fine. and it goes to the lightdm login screen, but it still makes me put
> in the password.
>
> My user is in the autologin and
Hi,
> Something just brought to mind apt-offline. The introductory paragraph
> in the man page states:
>
> apt-offline brings offline package management functionality to Debian
> based system. It can be used to download packages and its dependencies
> to be installed later on (or required to updat
Le 2018-11-05 13:12, s.mol...@sbcglobal.net a écrit :
I have encountered an unusual (at least for me) problem.
The only platform that I own that does not run Debian, is my new
64-bit HP laptop. I had VirtualBox installed on my old 64-bit laptop.
I just downloaded VirtualBox-5.2.20-125813-Win.e
Hi,
> In the past week my laptop freezes randomly, I can say it happens every 2-3
> hours. but there are actions that consistently always cause a freeze, like
> opening Zoom or executing lspci in Terminator.
I would suggest:
- try to get more debugging info using SysRQ keys [1]
- try to get more
Hi,
> i am trying to build a binary debian package consisting of a python
> script, shell scripts and a config file as daemon with either init.d or
> systemd start.
>
> The init.d script gets installed also the systemd file, but both are not
> enabled.
[...]
> In debian/rules is:
>
> #!/usr/bi
Hi,
I don’t know if this is the right place to ask, if my problem is not too
specific or something.
Is source-specific routing possible under debian? I think this is what
I need in my case ("multihoming" I think): on my laptop I'm generally
connected too zero up to two differents networks (from
Hi,
>Problem: Neither Win 10 OS has been able to successfully update since
>about last April. I have tried all the things I have found in an
>Internet search, including making sure the Win partition is marked
>boot-able, and downloading and running the Win 10 trouble shooter--all
>to no avail.
Le 2019-02-13 11:43, Patrick Kirk a écrit :
Hi all,
I have a simple asp.net core site that runs with Postgres which works
fine if I login as root and set it to run on port 80. SSL is done by
cloudflare. I would prefer to use nginx or at least have an iptable
rule to redirect the port 80 traffi
Le 2019-02-13 10:14, Adam Weremczuk a écrit :
Hi all,
I persistently get "The destination does not support EFI firmware" .
Apparently the latest Converter doesn't support Debian 9 (yet?).
More details on my issue here:
https://communities.vmware.com/message/2837600
Has anybody had success t
Mware
Converter and leave it running.
It works well for Debian 7, probably 8 as well but not 9 :(
On 13/02/19 13:09, Alexandre GRIVEAUX wrote:
Hello,
Why did you use a vmware converter instead configuring a VM and copy
your data ?
Regards,
Hello,
Maybe you can do dd HDD clonning of Pysic
Le 17/03/2019 à 01:27, Adam Haas a écrit :
> I was working with the Gnu Image Manipulation Program yesterday when a
> segmentation fault occurred. Attached is the information spit out in
> association with the event. Please let me know what additional
> information you need from me and I will pass
Hello,
Do anybody play bluray with kodi ?
Its work well with VLC on the same machine with:
- libaacs
- libdplus
- some others related
But i'm unable to play it with kodi, kodi detect a DVD instead of
bluray.
I'm using paquages from debian repos.
Thanks
Le 29/03/2019 à 17:47, Curt a écrit :
> On 2019-03-29, Alexandre GRIVEAUX wrote:
>> Hello,
>>
>> Do anybody play bluray with kodi ?
>>
>> Its work well with VLC on the same machine with:
>>
>> - libaacs
>> - libdplus
>> - some others relat
1 - 100 of 224 matches
Mail list logo
