[EMAIL PROTECTED] wrote: Quoting "Fred J." :Did you tried them separately, one at a time. This way you can find out if therouter and the W2K server are running DHCP.http://www.dhcp-handbook.com/dhcp_faq.html#wiaiahope this link will help with DHCP.Best regardsFernando>>> Mirco Sippel wrote: Fred J
Quoting "Fred J." <[EMAIL PROTECTED]>:
Did you tried them separately, one at a time. This way you can find out if the
router and the W2K server are running DHCP.
http://www.dhcp-handbook.com/dhcp_faq.html#wiaia
hope this link will help with DHCP.
Best regards
Fernando
Mirco Sippel <[EMAIL PRO
On Sat, Nov 19, 2005 at 10:32:45AM -0800, Fred J. wrote:
>
> I am sorry, I will not be able to answer those question as my networking
> experience is very primitive.
> but I can give the following info:
>
> using cat5 cables
> from adsl modem/router to eth1 in the debian box testing/2.6
Mirco Sippel <[EMAIL PROTECTED]> wrote: Fred J. schrieb:> after changeling the file /etc/network/interfaces, I was able to bring > up the downed eth* but why the relative dhcp package did not do this > like it did with the up eth* on boot-up time?> my /etc/network/interfaces now looks like this>
Fred J. schrieb:
after changeling the file /etc/network/interfaces, I was able to bring
up the downed eth* but why the relative dhcp package did not do this
like it did with the up eth* on boot-up time?
my /etc/network/interfaces now looks like this
auto lo
iface lo inet loopback
auto eth0
if
Peter Nuttall <[EMAIL PROTECTED]> wrote: On Sat, Nov 19, 2005 at 08:57:47AM -0800, Fred J. wrote:> Hello> > debian testing / 2.6.13> 2 ethernet cards, one to an asdl modem/router and one to switch. I am sure I have the relative kernel devices compiled in.> during boot up, I get Falied t
Fred J. schrieb:
:00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
:00:11.0 Ethernet controller: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller
Hello,
for the 3Com Controller you need to have the kernel module 3c59x
loaded,
On Sat, Nov 19, 2005 at 08:57:47AM -0800, Fred J. wrote:
> Hello
>
> debian testing / 2.6.13
> 2 ethernet cards, one to an asdl modem/router and one to switch. I am sure I
> have the relative kernel devices compiled in.
> during boot up, I get Falied to bring up eth0
> starting dhcp
Try:
#scanpci
if you can see bouth cards.
See also file:
cat /etc/network/interfaces
if bouth interfaces are defined there.
Try also to set static ip adresses in /etc/network/interfaces
Then try:
#ifup eth0
to bring intercafe up.
Good luck
Dexter
On Sat, 2005-11-19 at 08:57 -0800, Fred J. wr
Fred J. schrieb:
debian testing / 2.6.13
2 ethernet cards, one to an asdl modem/router and one to switch. I am
sure I have the relative kernel devices compiled in.
during boot up, I get Falied to bring up eth0
starting dhcp server: dhcpd3 failed to start - check syslog for diagnositcis
I did lo
Hello debian testing / 2.6.13 2 ethernet cards, one to an asdl modem/router and one to switch. I am sure I have the relative kernel devices compiled in. during boot up, I get Falied to bring up eth0 starting dhcp server: dhcpd3 failed to start - check syslog for diagnositcis I did lots of
11 matches
Mail list logo
