Fred J. schrieb:
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
0000:00:11.0 Ethernet controller: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller
Hello,
for the 3Com Controller you need to have the kernel module 3c59x
loaded, for the other Controller you need to have the module natsemi
loaded. Please check via "lsmod" if both modules are loaded.
If both modules are loaded check the /etc/network/interfaces if both
interfaces are listed there. Maybe the eth0 is not properly
configured here. The content of /etc/network/interfaces might help.
Regards
Mirco
--
Mirco Sippel ,= ,-_-. =. running on
email: [EMAIL PROTECTED] (( /)0 0(\_)) Debian
Webmaster von www.rsv-elgershausen.de `-'(. .)`-' GNU / Linux
Moderator auf www.linux-welten.de \_/ 3.1 "sarge"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
