Thank to you and all others who have provided advises.
I have reinstalled dicover and now DRI is working right fine : ppracer
is playable again.
I think I had a problem with the agpgart module even if it looks like it
was loaded just fine.
Again thank to you !!!
Regards,
JF
PS : there is stil
checked they didn't support
radeon 7500 series... The first card to be supported was radeon 8500...
If you think the nVidia Drivers are tough. ATI's will be even better (or
worse, depending on your view).
Me, I just always get nVidia cards. They are a known evil, ATIs Radeons
aren'
jf wrote:
> *(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
> (EE) RADEON(0): Failed to register i2c bus*
> (WW) RADEON(0): Direct rendering disabled
Do you use udev? Maybe this happens because the device /dev/dri/card0 is
created by udev?
I've read about problems with kernel 2.6.16 a
jf wrote:
> *(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
> (EE) RADEON(0): Failed to register i2c bus*
> (WW) RADEON(0): Direct rendering disabled
Do you use udev? Maybe this happens because the device /dev/dri/card0 is
not created?
I've read about problems with kernel 2.6.16 and o
jf wrote:
Florian Kulzer wrote:
[...]
OK, that indeed suggests that there is something wrong with your
hardware acceleration. 1600 FPS for glxgears seems fine to me (I have
around 900 FPS), so we have to look somewhere else for the problem.
I agree, it looks very strange to me
Please
On Mon, 2006-04-10 at 23:42 +0200, jf wrote:
> Hi,
> I use the default driver provided by xorg so I think it won't work for
> me but thank you
You use the default driver for Radeon from X.org?
DRI won't ever be enabled nor will GLX ever be fast.
You'll need to install the ATI Binary Drivers, wh
've already played planetpenguin-racer (at that time it was
> called tux-racer...) on the same hardware (and sempron 2800, 1Go Ram,
> ATI aiw radeon 7500) and it was pretty playable.
> But, few days ago I wanted to have a look at slune, and I found that it
> was slow,
Florian Kulzer wrote:
jf
wrote:
In fact, I provided glxgears measures as some
kind of reference...
In the past I've already played planetpenguin-racer (at that time it
was
called tux-racer...) on the same hardware (and sempron 2800, 1Go Ram,
ATI aiw radeon 7500) and i
On Sun, Apr 09, 2006 at 08:58:22AM +0200, jf wrote:
> In fact, I provided glxgears measures as some kind of reference...
> In the past I've already played planetpenguin-racer (at that time it was
> called tux-racer...) on the same hardware (and sempron 2800, 1Go Ram,
&g
jf wrote:
In fact, I provided glxgears measures as some kind of reference...
In the past I've already played planetpenguin-racer (at that time it was
called tux-racer...) on the same hardware (and sempron 2800, 1Go Ram,
ATI aiw radeon 7500) and it was pretty playable.
But, few days ago I w
In fact, I provided glxgears measures as some kind of reference...
In the past I've already played planetpenguin-racer (at that time it was
called tux-racer...) on the same hardware (and sempron 2800, 1Go Ram,
ATI aiw radeon 7500) and it was pretty playable.
But, few days ago I wanted to h
jf wrote:
Hi,
I can't achieve to get good performance from my ati radeon 7500.
All should work fine but, when running glxgears, the gears are rotating
really slowly.
Here are the output :
> glxgears
8036 frames in 5.0 seconds = 1607.024 FPS
8043 frames in 5.0 seconds = 1608.572
> I can't achieve to get good performance from my ati radeon 7500.
[...]
> 8036 frames in 5.0 seconds = 1607.024 FPS
Would you expect more from such card? I get...
3137 frames in 5.0 seconds = 627.234 FPS
...on GeForce2 MX200 32MB. So your 1600 FPS seems normal to me.
> what
jf wrote:
Hi,
I can't achieve to get good performance from my ati radeon 7500.
All should work fine but, when running glxgears, the gears are rotating
really slowly.
Here are the output :
> glxgears
8036 frames in 5.0 seconds = 1607.024 FPS
8043 frames in 5.0 seconds = 1608.572
Hi,
I can't achieve to get good performance from my ati radeon 7500.
All should work fine but, when running glxgears, the gears are rotating
really slowly.
Here are the output :
> glxgears
8036 frames in 5.0 seconds = 1607.024 FPS
8043 frames in 5.0 seconds = 1608.572 FPS
8036 frame
em back. Is there a
> > step I'm missing... do I have to do something special to get full support
> > for my video card (ATI Radeon 7500).
>
> strange that you're encountering a problem on your video card model
> (ati radeon 7500). I do have the same card, but didn'
do something special to get full support
> for my video card (ATI Radeon 7500).
strange that you're encountering a problem on your video card model
(ati radeon 7500). I do have the same card, but didn't encounter much
problems:
Try doing the configuration the debian way via dpkg-re
seems odd there.
I've told KDE to apply the settings on startup and logged out, logged back
in... even rebooted completely only to have the problem back. Is there a
step I'm missing... do I have to do something special to get full support
for my video card (ATI Radeon 7500).
Joe
--
To UNS
>>
>> The big question: what version of XFree86 are you using?
>>
tony> 4.2.1 I'm afraid.
Ah, yes ... Jonathan is using that version as well ... no wonder I
couldn't get it to work ...
On to the next thread!
Thanks,
-Kenneth
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wit
js> I've taken a look at my log output and for now, I put my head in
js> ashes, throw myself to the ground and plea for mercy.
Please! Jonathan ... stand up and clean yourself off ... you are forgiven! ;-)
js> I'm using XFree 4.2 (and mybe that's the reason, it works for me
js> and my R
Hallo
I've taken a look at my log output and for now, I put my head in ashes, throw
myself to the ground and plea for mercy.
So, I'm using XFree 4.2 (and mybe that's the reason, it works for me and my
Radeon 8500). Your (and mine) card are abviously not listed in the supported
device list of the
" in the "device" section to
"radeon", but didn't see Radeon 7500 (RV200 QW) listed ...
Thanks!
-Kenneth
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 01)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 01)
00:1d.0 USB Controller: Intel Cor
Sorry for the delay!
js> Related to the current problem, it would have been nice to have
js> heard whether or not the suggestion of commenting out the PCI ID
js> option had a positive effect.
I tried removing the BusID option as you suggested, but that changed nothing.
I'm going to try a
I Radeon QG (AGP),
> ATI Radeon VE (AGP)
don't correspond with the 7500, according to the 4.3.0 "radeon"
driver, which gives for the 7500:
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP)
--
Pigeon
Be kind to pigeons
Get my GPG key here: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x21C61F7F
pgp0.pgp
Description: PGP signature
>This asside, there's a not so elegant way to steer around this problem. Using
>the commercial ati drivers, available at www.ati.com. From my experience, I
>would suggest to use them as a last resort, the discussion on /. seemed to
>indicate, this new version suffers from some ugly bugs, but Yo
>On Sun, Mar 07, 2004 at 08:01:02AM -0500, Kenneth Jacker wrote:
>I'm using a backport of 4.3.0. Never tried with 4.1; I got 4.3.0
>before I got the 7500.
Well, I'm using a 8500LE (Hercules) graphics adapter. As this is supported in
4.1.0 without any trouble, I find it hard to belive the 7500 is
On Sun, Mar 07, 2004 at 08:01:02AM -0500, Kenneth Jacker wrote:
> tm> I have a 7500 ...
>
> Is anyone else besides Tony using this controller with Woody?
Me. But not on this box, so I don't have the configs to hand at the
moment.
> tm> ... and I don't beleive X 4.1 supports it.
I'm using a
'Afraid I can't remember the details, it was some time ago. I think
there are various versions of the Radeon chip and the 7500 was new when
4.1 came out. I found a reference to problems with 4.1 so tried 4.2 and
all my problems went away so I assumed that version was needed for the 7500.
Reg
tm> I have a 7500 ...
Is anyone else besides Tony using this controller with Woody?
tm> ... and I don't beleive X 4.1 supports it.
I have a hunch you are speaking from *experience* -- the most valuable
position!
But why do these links (including one from the official 'xfree86.org'
site) imp
FBDev True. Everything works fine.
Regards
Tony Middleton.
Kenneth Jacker wrote:
I am running 'woody' with the 4.1.0-16woody1 version of XFree86 on a
fairly new Dell with a "ATI Radeon RV200 QW [Radeon 7500]" video
controller.
For some reason, the board isn't being
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 06 March 2004 11:47 am, Kenneth Jacker wrote:
> js> You could ease up error detection by providing the complete
> /var/log/ js> XFree86.0.log and /etc/X11/XF86Config(-4).
>
> Good idea!
>
> The files are attached below. I manually edited
-)
I'm not a XFree professional, but one thing looks strange:
>Section "Device"
># Identifier "ATI Technologies Radeon 7500 [RV200 QW]"
> Identifier "Radeon"
> Driver "ati"
> BusID "PC
h"/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load"GLcore"
Load"bitmap"
Load"dbe"
Load"ddc"
Load"dri"
Load"extmod"
Load
Hallo,
>For some reason, the board isn't being recognized when I 'startx'.
>In particular, this:
>
>(II) ATI unknown chipset (0x5157)
>
>and this:
>
>(WW) ATI: PCI/AGP Mach64 in slot 1:0:0 could not be detected
You could ease up error detection by providing the complete /var/log/
XFree86.
I am running 'woody' with the 4.1.0-16woody1 version of XFree86 on a
fairly new Dell with a "ATI Radeon RV200 QW [Radeon 7500]" video
controller.
For some reason, the board isn't being recognized when I 'startx'.
In particular, this:
(II) ATI unknown c
On Mon, Jul 07, 2003 at 03:52:29PM +, jaroslaw_psikuta wrote:
> I have problem with radeon 7500 on dell notebook
> Configuration:
> 2.4.21
> xfree 4.3.0
> kde 3.1.2
I also have a 7500 radeon in my ibm laptop. I supose you use the cvs trunk from the
dri project? Did you comp
Hello
I have problem with radeon 7500 on dell notebook
Configuration:
2.4.21
xfree 4.3.0
kde 3.1.2
when i want startx run i have:
(==) Using config file: "/etc/X11/XF86Config-4"
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols
found
Skip
On Wed, May 28, 2003 at 12:29:58AM +0200, Joerg Johannes wrote:
> On Tuesday 27 May 2003 23:29, Pigeon wrote:
> > Hi,
> >
> > If anyone has any documentation defining the addresses and functions
> > of the various registers of the Radeon 7500 - especially those
> >
On Tuesday 27 May 2003 23:29, Pigeon wrote:
> Hi,
>
> If anyone has any documentation defining the addresses and functions
> of the various registers of the Radeon 7500 - especially those
> concerning the setting of pixel clock frequency in text mode - I
> would be most grateful
Hi,
If anyone has any documentation defining the addresses and functions
of the various registers of the Radeon 7500 - especially those
concerning the setting of pixel clock frequency in text mode - I would
be most grateful if you could email it to me, off list.
Thanks,
--
Pigeon
Be kind to
e, so hello to everyone.
> > > > I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> > > > mobiliti as it's video card. Using woody, I can't setup my X server.
> > > > when I issue the command "startx" it gives me fatal errors li
recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> > > mobiliti as it's video card. Using woody, I can't setup my X server.
> > > when I issue the command "startx" it gives me fatal errors like: "no
> > > screen found". I
On Thursday 19 December 2002 12:59 am, you wrote:
> On Wed, Dec 18, 2002 at 02:41:07PM +0330, Aryan Ameri wrote:
> > Hi there:
> > Guess I'm new around here, so hello to everyone.
> > I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500
> > mobiliti as
On Wed, Dec 18, 2002 at 02:41:07PM +0330, Aryan Ameri wrote:
> Hi there:
> Guess I'm new around here, so hello to everyone.
> I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500 mobiliti as
> it's video card. Using woody, I can't setup my X server.
Hi there:
Guess I'm new around here, so hello to everyone.
I recently bought a IBM ThinkPad A31, which uses a ATI Radeon 7500 mobiliti as
it's video card. Using woody, I can't setup my X server. when I issue the
command "startx" it gives me fatal errors like: "no
Hi,
* Mingzhou Nie <[EMAIL PROTECTED]> [021212 10:23]:
> Hello, all,
>
> I'm a recent Linux user and decided to try on Debian. Installed "woody" and
> installation process went just fine. However, I can not start x.
>
> My video card is ATI radeon 7500
Hello, all,
I'm a recent Linux user and decided to try on Debian. Installed "woody" and
installation process went just fine. However, I can not start x.
My video card is ATI radeon 7500 / 64MB SDRAM. I understand woody comes with
XFree86 4.1.0 which just start support radeon
You can try
XFree86 -configure
On Tue, 22 Oct 2002, Oleg wrote:
> Hi
>
> I've installed Debian on half a dozen different machines, and configuring X
> has always been the greatest pain. Currently, I'm trying to do this on a
> Fujitsu Lifebook E-7110 laptop that h
Oleg <[EMAIL PROTECTED]> wrote:
|> How can I install XFree86 from unstable on a stable machine:
|>
|> apt-get -t unstable install xserver-xfree86 ?
|>
|> Do I need to modify my sources.list?
You need to create the file /etc/apt/preferences looking something
like this:
---
Package: *
Pin: r
s always been the greatest pain. Currently, I'm trying to do this on a
> > > Fujitsu Lifebook E-7110 laptop that has an ATI Mobility Radeon 7500 card
> > > (32MB) and an LCD that can do up to 1400x1050 @ 60 Hz.
> > >
> > > When I tried installing Man
a
> > Fujitsu Lifebook E-7110 laptop that has an ATI Mobility Radeon 7500 card
> > (32MB) and an LCD that can do up to 1400x1050 @ 60 Hz.
> >
> > When I tried installing Mandrake 9.0 just for kicks, it configured X without
> > even asking me any questions (I sh
I just got an ATI Radeon 7500 card with dual outputs (DVI-I and VGA). My
search of the Xfree86 site, various newgroups, etc, turns up conflicting
information regarding the status of this card.
The only driver referenced on the XFree site is the ATI site, which does
not list any radeon cards as
ing, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 7 19:44:19 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Mon
Iam a little bit dazzled about what for drivers have to i use for mplayer and
TV. If i use mplayer with xv output and switch then to another virtual desktop,
i have an mplayer screenshot in this position. Then i've to switch back and the
movie will go on. I can't minimize the mplayer window, becau
On Mon, 2002-09-02 at 19:45, Jaye Inabnit ke6sls wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Monday 02 September 2002 12:28 pm, Mariano Kamp wrote:
> > Hi,
> >
> > I am not sure how to describe this problem properly. Basically my machine
> > hangs every now and then. Sometim
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 02 September 2002 12:28 pm, Mariano Kamp wrote:
> Hi,
>
> I am not sure how to describe this problem properly. Basically my machine
> hangs every now and then. Sometimes it takes 20 minutes, sometimes five and
> it is also sometimes runnin
I found out that the machine is still pingable after X hangs.
Mariano
On Mon, 2002-09-02 at 21:28, Mariano Kamp wrote:
> Hi,
>
> I am not sure how to describe this problem properly. Basically my machine hangs
>every now and then. Sometimes it takes 20 minutes, sometimes five and it is also
Hi,
I am not sure how to describe this problem properly. Basically my machine hangs
every now and then. Sometimes it takes 20 minutes, sometimes five and it is also
sometimes running for 60 minutes until it hangs.
Hangs means, I cannot do anything anymore. At least CTRL+ALT+DEL/BS and CTRL+AL
On Tue, 2002-02-26 at 18:09, Stephan Hachinger wrote:
> Hi!
>
> A friend of mine (not on this list) has problems getting X version
> 4.1.0 (from testing) to start on his box with a Radeon 7500 card
> inside. When trying xf86cfg in graphics mode, it doesn't recognize
> the c
Hi!
Thanks very much for your answers.
Cheers,
Stephan
On Tue, 26 Feb 2002 21:39:50 -0800
Aaron Brashears <[EMAIL PROTECTED]> wrote:
> On Tue, Feb 26, 2002 at 03:16:52PM -0800, Tim Moss wrote:
> > You need XFree 4.2.0 for Radeon 7500 support but I don't think
4.2.0 is>
On Tue, Feb 26, 2002 at 03:16:52PM -0800, Tim Moss wrote:
> You need XFree 4.2.0 for Radeon 7500 support but I don't think 4.2.0 is
> available as Debian packages yet.
All very true. Before you bug the maintainer (like I did...) Check his
webpage for updates:
http://people.debian.org/~branden/
Apparently, on Wed, Feb 27, 2002 at 12:09:29AM +0100, Stephan Hachinger wrote:
> Hi!
>
> A friend of mine (not on this list) has problems getting X version
> 4.1.0 (from testing) to start on his box with a Radeon 7500 card
> inside. When trying xf86cfg in graphics mode, it doesn&#x
Hi!
A friend of mine (not on this list) has problems getting X version
4.1.0 (from testing) to start on his box with a Radeon 7500 card
inside. When trying xf86cfg in graphics mode, it doesn't recognize
the card correctly, and when choosing the drivers "ati" or "r128"
* csj <[EMAIL PROTECTED]> [011205 08:08]:
> ...
> I just bought a Radeon VE (64MB SDR). Xv works out of the box, except
> for one slightly annoying thing. The Xv output can't be suspended
> properly. When I try to suspend or minimize the player program (xine,
> smpeg-plaympeg), I get a freeze f
On Saturday 01 December 2001 00:09, Karsten Heymann wrote:
> Hi,
>
> sorry for the delay:
>
> * csj <[EMAIL PROTECTED]> [011127 11:48]:
> > ...
> > Does this mean you've got XVideo (Xv) going on your Radeon VE? I'm
> > curious what the output of the following commands is on your
> > system: (1) xvi
* Ax <[EMAIL PROTECTED]> [011130 13:08]:
> Dne so 24. listopad 2001 10:37 Karsten Heymann napsal(a):
> > > I don't have a Radeon card (yet) but I was just looking up info about
> > > it on the XFree lists and it appears that support for it is only in
> > > the XFree CVS right now. It should be incl
Hi,
sorry for the delay:
* csj <[EMAIL PROTECTED]> [011127 11:48]:
> ...
> Does this mean you've got XVideo (Xv) going on your Radeon VE? I'm
> curious what the output of the following commands is on your system:
> (1) xvinfo | grep Adaptor
# xvinfo | grep Adaptor
Adaptor #0: "ATI Rage128
begin: Ax <[EMAIL PROTECTED]> quote
> Dne so 24. listopad 2001 10:37 Karsten Heymann napsal(a):
> > > I don't have a Radeon card (yet) but I was just looking up info about
> > > it on the XFree lists and it appears that support for it is only in
> > > the XFree CVS right now. It should be included
Dne so 24. listopad 2001 10:37 Karsten Heymann napsal(a):
> > I don't have a Radeon card (yet) but I was just looking up info about
> > it on the XFree lists and it appears that support for it is only in
> > the XFree CVS right now. It should be included in the next official
> > release. I think yo
On Saturday 24 November 2001 17:37, Karsten Heymann wrote:
> * Tim Moss <[EMAIL PROTECTED]> [011124 10:20]:
> > Apparently, on Thu, Nov 22, 2001 at 07:27:47PM -0800, Dmitriy wrote:
> > > ...
> >
> > I don't have a Radeon card (yet) but I was just looking up info
> > about it on the XFree lists and
* Tim Moss <[EMAIL PROTECTED]> [011124 10:20]:
> Apparently, on Thu, Nov 22, 2001 at 07:27:47PM -0800, Dmitriy wrote:
> > ...
> I don't have a Radeon card (yet) but I was just looking up info about it
> on the XFree lists and it appears that support for it is only in the
> XFree CVS right now. It
Apparently, on Thu, Nov 22, 2001 at 07:27:47PM -0800, Dmitriy wrote:
> On Thu, Nov 22, 2001 at 06:31:11PM -0500, Diarmuid Drew wrote:
> > I'm new to 3D, just upgraded my tseng ET6000 to a Radeon 7500.
> >
> > I'd like to get XFree86 4.1.0 to work, 2D would be
On Thu, Nov 22, 2001 at 06:31:11PM -0500, Diarmuid Drew wrote:
> I'm new to 3D, just upgraded my tseng ET6000 to a Radeon 7500.
>
> I'd like to get XFree86 4.1.0 to work, 2D would be nice, 3D would be "better
> than a best thing on a Best tour of Best land"
I'm new to 3D, just upgraded my tseng ET6000 to a Radeon 7500.
I'd like to get XFree86 4.1.0 to work, 2D would be nice, 3D would be "better
than a best thing on a Best tour of Best land" :)
Trying to get the radeon driver loaded gives the error
"(EE) No devices dete
I'm new to 3D, just upgraded my tseng ET6000 to a Radeon 7500.
I'd like to get XFree86 4.1.0 to work, 2D would be nice, 3D would be "better
than a best thing on a Best tour of Best land" :)
Trying to get the radeon driver loaded gives the error
"(EE) No devices dete
I'm new to 3D, just upgraded my tseng ET6000 to a Radeon 7500.
I'd like to get XFree86 4.1.0 to work, 2D would be nice, 3D would be "better
than a best thing on a Best tour of Best land" :)
Trying to get the radeon driver loaded gives the error
"(EE) No devices dete
I recently purchased an ATI Radeon 7500 over a GEForce because of
the opensouce support.
The ATI Radeon is supported by XFree86 according to #283 on
http://www.xfree86.org/cvs/changes.html
I am running XFree86 4.1.0-7 (unstable).
I have compiled in DRI and Radeon support in the 2.4.12
77 matches
Mail list logo
