пн, 21 окт. 2024 г. в 09:43, Timothy M Butterworth
:
> I have the following device:
> Bus 003 Device 010: ID 0403:6001 Future Technology Devices International, Ltd
> FT232 Serial (UART) IC
>
> I expect the device to show up as: /dev/ttyUSB0 but i am not finding any
> ttyUSB devices in /dev.
Do
On Mon, Oct 21, 2024 at 12:25 AM Jeffrey Walton wrote:
> On Sun, Oct 20, 2024 at 11:33 PM Timothy M Butterworth
> wrote:
> >
> > I have the following device:
> > Bus 003 Device 010: ID 0403:6001 Future Technology Devices
> International, Ltd FT232 Serial (UART) IC
> >
> > I expect the device to
On Sun, Oct 20, 2024 at 11:33 PM Timothy M Butterworth
wrote:
>
> I have the following device:
> Bus 003 Device 010: ID 0403:6001 Future Technology Devices International, Ltd
> FT232 Serial (UART) IC
>
> I expect the device to show up as: /dev/ttyUSB0 but i am not finding any
> ttyUSB devices i
I have the following device:
Bus 003 Device 010: ID 0403:6001 Future Technology Devices International,
Ltd FT232 Serial (UART) IC
I expect the device to show up as: /dev/ttyUSB0 but i am not finding any
ttyUSB devices in /dev.
I Googled around some and found that the drivers for this device have
On Mon 21 Nov 2022 at 13:02:13 (-0500), jeanrocco jr wrote:
> Hello, I just installed debian-11.5.0-amd64-netinst.iso on my APU2E4, which
> does not have a vga display but only a serial console.
>
> I could not find any documentation in Debian regarding the "Debian
> GNU/Linux
Hello, I just installed debian-11.5.0-amd64-netinst.iso on my APU2E4, which
does not have a vga display but only a serial console.
I could not find any documentation in Debian regarding the "Debian
GNU/Linux installer boot menu" where you have to type H (help), then TAB
and type &quo
Debians,
I'm trying to troubleshoot what I'm doing rong when trying to install
Debian through serial console.
If I start a Qemu VM like so:
qemu-system-x86_64 -cdrom debian-bullseye-DI-alpha2-amd64-netinst.iso
-nographic -vga none -m 1024
At the Debian install prompt pressing the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Sep 09, 2016 at 09:03:33PM +0300, Jarle Aase wrote:
> Hi,
>
> I was just about to order some usb2serial hardware when I read this.
[...]
> I'll try it when I get the first server assembled. Thanks a lot!
Hey, glad to help :-)
- -- t
-BEG
rds every time. Some times I am far away when
this happens [...]
An interesting alternative to the serial console thing is baking
in an SSH server into the initramfs. There are small SSH servers
built for that, like Dropbear.
Upside is that you don't need any additional hardware and it's
pret
On Freitag, 9. September 2016 08:15:37 PYT Tixy wrote:
> On Fri, 2016-09-09 at 08:46 +0300, Lars Noodén wrote:
> > I've used USB-to-serial adapters with the Prolific chipset. They've
> > worked fine for me, in various models. (I haven't tried FTDI and am
> > suspicious of them.)
>
> And my exper
deal with. So my servers will have
> to be started at least a few times every quarter.
[...]
> That means that I need to reboot the servers relatively often, and
> provide the luks passwords every time. Some times I am far away when
> this happens [...]
An interesting alternative to t
On Fri, 2016-09-09 at 08:46 +0300, Lars Noodén wrote:
> I've used USB-to-serial adapters with the Prolific chipset. They've
> worked fine for me, in various models. (I haven't tried FTDI and am
> suspicious of them.)
And my experience is the opposite. I have genuine (there's apparently a
lot of
enever I need to. If I could log on to the grub console on
> the servers over a serial link, that's all I need, really.
>
> Does anyone here have any experience with remote control with Debian
> boxes over serial? Will it work reliable?
Quite a while back (Etch) I had some Debia
On Thu, 08 Sep 2016, Jarle Aase wrote:
> Does anyone here have any experience with remote control with Debian boxes
> over serial? Will it work reliable?
It's fairly reliable; I actually prefer it to using KVM in almost all
cases. You just need to get it configured properly in grub, the bios,
and
On Thu, 8 Sep 2016 15:43:31 -0600
Glenn English wrote:
> For remote access, the RPi sounds like a good idea to me. I've had one on the
> 'Net for several years, doing things not requiring major CPU power. It's on
> my UPS, and it's had no reliability problems.
>
> A relatively small dedicated
For remote access, the RPi sounds like a good idea to me. I've had one on the
'Net for several years, doing things not requiring major CPU power. It's on my
UPS, and it's had no reliability problems.
A relatively small dedicated UPS would likely keep your border router and an
RPi going for quit
o. If I could log on to the grub console on
> the servers over a serial link, that's all I need, really.
>
> Does anyone here have any experience with remote control with Debian
> boxes over serial? Will it work reliable?
Generally speaking....
I haven't used a seri
On 9/8/16 3:26 PM, Jarle Aase wrote:
I want to set up a few servers at home. Unfortunately, as I live in
Bulgaria at the moment, the electric power is gone pretty often for
longer periods than my UPS'es can deal with. So my servers will have
to be started at least a few times every quarter.
On Thu, Sep 08, 2016 at 10:26:59PM +0300, Jarle Aase wrote:
> I want to set up a few servers at home. Unfortunately, as I live in Bulgaria
> at the moment, the electric power is gone pretty often for longer periods
> than my UPS'es can deal with. So my servers will have to be started at least
> a f
I want to set up a few servers at home. Unfortunately, as I live in
Bulgaria at the moment, the electric power is gone pretty often for
longer periods than my UPS'es can deal with. So my servers will have to
be started at least a few times every quarter.
Another challenge with living in Bulgar
Stephen Powell wrote:
> On Mon, 07 Sep 2015 11:47:56 -0400 (EDT), Sven Hartge wrote:
>> Looks fine, from a cursory glance.
>>
>> Maybe you can add a section about using
>>
>>"systemctl cat serial-getty@ttyS0.service"
>>
>> to verfiy that the override.conf has been
>> read successfully aft
On Mon, 07 Sep 2015 18:08:05 -0400 (EDT), Bob Bernstein wrote:
>
> What a great contribution!
>
> My null-modem cable ought to still be around here somewhere!
>
> :-)
I try to focus on the latest technology.
--
.''`. Stephen Powell
: :' :
`. `'`
`-
On Mon, 07 Sep 2015 11:47:56 -0400 (EDT), Sven Hartge wrote:
>
> Looks fine, from a cursory glance.
>
> Maybe you can add a section about using
>
>"systemctl cat serial-getty@ttyS0.service"
>
> to verfiy that the override.conf has been
> read successfully after "systemctl daemon-reload".
D
On Mon, 7 Sep 2015, Stephen Powell wrote:
I just finished updating my web page to reflect the new
information. Once again, go to
http://users.wowway.com/~zlinuxman/serial.htm
What a great contribution!
My null-modem cable ought to still be around here somewhere!
:-)
--
Bob Bernstein
Stephen Powell wrote:
> Sven and Michael, please review this also and correct me if I made a
> mistake. I do not want to publish bad advice.
Looks fine, from a cursory glance.
Maybe you can add a section about using "systemctl cat
serial-getty@ttyS0.service" to verfiy that the override.conf ha
On Mon, 07 Sep 2015 09:56:12 -0400 (EDT), David Parker wrote:
>
> Thanks for all the clarification. I now find myself in need of doing this
> again on another server running Jessie, and I just want to make sure I'm
> clear on what the best procedure is.
> ...
I just finished updating my web page
Hello,
Thanks for all the clarification. I now find myself in need of doing this
again on another server running Jessie, and I just want to make sure I'm
clear on what the best procedure is. As I understand it, I should
copy /lib/systemd/system/serial-getty@.service to
/etc/systemd/system/serial
On Sun, 06 Sep 2015 16:06:35 -0400 (EDT), Michael Biebl wrote:
> Am 06.09.2015 um 21:04 schrieb Stephen Powell:
>> ...
>>[Service]
>>ExecStart=-/sbin/agetty -8 --noclear %I 38400 ibm3151
>>
>> But when I restart the service, I get the following error:
>>
>> systemd[1]: serial-getty@ttyS0
Hello Michael,
On 09/06/2015 10:06 PM, Michael Biebl wrote:
> See also man 5 systemd.unit , "Example 2. Overriding vendor settings":
>
>>Note that for drop-in files, if one wants to remove entries from a
>> setting that is
>>parsed as a list (and is not a dependency), such as
>>
Stephen Powell wrote:
> Well, Sven, that's a nice idea, but I can't get it to work for me in this
> situation. I issued
>systemctl edit serial-getty@ttyS0.service
> and placed the following two lines into the file:
>[Service]
>ExecStart=-/sbin/agetty -8 --noclear %I 38400 ibm3151
Am 06.09.2015 um 21:04 schrieb Stephen Powell:
>[Service]
>ExecStart=-/sbin/agetty -8 --noclear %I 38400 ibm3151
>
> But when I restart the service, I get the following error:
>
> systemd[1]: serial-getty@ttyS0.service: Service has more than one ExecStart=
> setting, which is only allow
On Wed, 02 Sep 2015 17:29:40 -0400 (EDT), Sven Hartge wrote:
>
> systemd provides a way to override or ammend parts of units. You do this
> by creating a directory structure like this:
>
> /etc/systemd/system/foo.service.d/
>
> This will contain all additional config files for the unit
> "foo.
On Thu, 03 Sep 2015 20:06:43 -0400 (EDT), Michael Biebl wrote:
>
> Am 03.09.2015 um 03:14 schrieb Stephen Powell:
>> Do you know a similar technique for overriding individual udev rules in
>> a system-provided rules file?
>
> A similar mechanism exists for udev rules file.
> See man 7 udev -> "RU
Am 03.09.2015 um 03:14 schrieb Stephen Powell:
> Do you know a similar technique for overriding individual udev rules in
> a system-provided rules file?
A similar mechanism exists for udev rules file.
See man 7 udev -> "RULES FILES"
--
Why is it that all of the instruments seeking intelligent l
Stephen Powell wrote:
> Do you know a similar technique for overriding individual udev rules in
> a system-provided rules file?
Ah, that part is a white spot on my (mind)map.
Maybe Michael Biebl can provide more input, as one of the DDs
maintaining systemd and udev he should be able to provide
t; Also note how a later "TTYVTDisallocate=no" overrides the earlier
> "TTYVTDisallocate=yes".
>
> You can also use "systemd-delta" to check which units have overrides or
> extentions. And with newer systemd (Stretch and newer) you can even use
> &q
On Wednesday 02 September 2015 23:29:40 Sven Hartge wrote:
> Eike Lantzsch wrote:
> > On Wednesday 02 September 2015 20:58:29 Sven Hartge wrote:
> >> David Parker wrote:
> >>> Thanks. I actually found that site in a Google search, and it's where
> >>> I found the tip on copying the
> >>> /lib/sy
Eike Lantzsch wrote:
> On Wednesday 02 September 2015 20:58:29 Sven Hartge wrote:
>> David Parker wrote:
>>> Thanks. I actually found that site in a Google search, and it's where
>>> I found the tip on copying the
>>> /lib/systemd/system/serial-getty@.service template file to customize
>>> the
On Wednesday 02 September 2015 20:58:29 Sven Hartge wrote:
> David Parker wrote:
> > Thanks. I actually found that site in a Google search, and it's where
> > I found the tip on copying the
> > /lib/systemd/system/serial-getty@.service template file to customize
> > the baud rate, etc. Specifica
David Parker wrote:
> Thanks. I actually found that site in a Google search, and it's where
> I found the tip on copying the
> /lib/systemd/system/serial-getty@.service template file to customize
> the baud rate, etc. Specifically, I found the info I needed at:
> http://users.wowway.com/~zlinu
Thanks. I actually found that site in a Google search, and it's where I
found the tip on copying the /lib/systemd/system/serial-getty@.service
template file to customize the baud rate, etc. Specifically, I found the
info I needed at:
http://users.wowway.com/~zlinuxman/serial.htm#Systemd
Thanks!
On Tue, 01 Sep 2015 12:13:56 -0400 (EDT), David Parker wrote:
>
> I have a bunch of Debian Wheezy servers set up with the console available
> via the serial port. Generally, I just add this line to /etc/inittab:
> ...
> That's all fine and good, but when I try to do this on my desktop PC
> runnin
Michael Biebl wrote:
> As for overriding the system provided service files, I usually recommend
> to use drop-ins, i.e. creating a
> /etc/systemd/system/foo.service.d/my_custom_config.conf
> This way you only need to override what you are actually interested in.
Users of Testing/Stretch or Unsta
Am 01.09.2015 um 19:31 schrieb David Parker:
> Thanks, Michael! That was indeed the problem. I
> copied /lib/systemd/system/serial-getty@.service to /etc/systemd/system,
> edited it to use the correct baud rate and terminal type, and then ran
> "systsystemctl start serial-getty@ttyS0.service" an
Am 01.09.2015 um 18:13 schrieb David Parker:
> And still not in the same way that they appear on Wheezy ("/sbin/getty
> 38400 tty1", etc.). If I add the line for the serial console to
> /etc/inittab and reload the init deamon, or even reboot the PC, it simply
> does noth
Hello,
I have a bunch of Debian Wheezy servers set up with the console available
via the serial port. Generally, I just add this line to /etc/inittab:
co:2345:respawn:/sbin/getty -L ttyS0 9600 vt102
And then run "kill -HUP 1" and the serial console works (I could also use
&quo
On 30/06/15 22:04, venkat wrote:
> Dear all
> I am trying to display all the boot screen information in a android
> device. For this trial ,
> I notice that serial console is one of the available option to forward
> all display information messages to serial port.
>
>
Dear all
I am trying to display all the boot screen information in a android
device. For this trial ,
I notice that serial console is one of the available option to forward
all display information messages to serial port.
Before starting this process would like to understand the Pro'
On 10/3/12, Chris Bannister wrote:
> On Tue, Oct 02, 2012 at 12:10:02PM +0300, Lars Noodén wrote:
>> Sorry. There's a typo, intited should be initrd.
>
> Ahh! OOPs didn't read whole thread.
>
> Still, it does show the reason why you should copy 'n' paste instead of
> laboriously typing it out by
On Tue, Oct 02, 2012 at 12:10:02PM +0300, Lars Noodén wrote:
> On 10/1/12 11:58 PM, Miles Fidelman wrote:
> Sorry. There's a typo, intited should be initrd.
Ahh! OOPs didn't read whole thread.
Still, it does show the reason why you should copy 'n' paste instead of
laboriously typing it out by ha
On Mon, Oct 01, 2012 at 04:58:25PM -0400, Miles Fidelman wrote:
> turn into this:
> append vga=788 inited=debian-installer/i386/initrd.gz --
^^
> console=ttyS2,19200 earlyprint=serial,ttyS2,19200
>
> Now all seems to be working.
Weird.
--
"If you're not careful, the news
On 10/1/12 11:58 PM, Miles Fidelman wrote:
> Turns out that the remote serial-over-ip terminal redirects COM3, and
> shows up as ttys2, which makes this
>
>>>
>>> debian-installer/i386/boot-screens/txt.cfg:
>>> append vga=788 inited=debian-installer/i386/initrd.gz --
>>> console=ttyS0,19200 ea
Turns out that the remote serial-over-ip terminal redirects COM3, and
shows up as ttys2, which makes this
debian-installer/i386/boot-screens/txt.cfg:
append vga=788 inited=debian-installer/i386/initrd.gz --
console=ttyS0,19200 earlyprint=serial,ttyS0,19200
turn into this:
append vga=788
the splash
screen via a remote KVM), but can't access it via a remote serial console.
Serial booting with PXE booting needs changes in three places, from what
I recall. These are from my notes, speed 19200:
debian-installer/i386/boot-screens/syslinux.cfg:
serial 0 19200 0
debian-inst
> screen via a remote KVM), but can't access it via a remote serial console.
>
> I think I need to put some magic incantation in ../pxelinux.cfg, or
> possibly some other config file - but can't find any documentation on
> how to do it (what I have found is contradictory
Hi Folks,
I'm trying to build a headless, remote server - using an IPMI serial
terminal and PXEboot. The thing is, that I've got everything set up to
the point that the install system is booting (I can see the splash
screen via a remote KVM), but can't access it via a remote
On Mon, Apr 9, 2012 at 9:36 PM, Jason Heeris wrote:
> On 5 April 2012 21:08, Tom H wrote:
>>
>> Re "/usr/share/polkit-1/actions/org.freedesktop.udisks.policy": (It's
>> better to create a pkla file in
>> "/etc/polkit-1/localauthority/50-local.d" than edit a
>> "/usr/share/polkit-1/" file) Does pk
On 5 April 2012 21:08, Tom H wrote:
> Re "pkexec true": Is your user a member of the sudo group? sudo group
> members can use pkexec via
> "/etc/polkit-1/localauthority.conf.d/51-debian-sudo.conf". If you
> don't want that user in the sudo group, you can create a conf file in
> "/etc/polkit-1/loca
On 5 April 2012 16:52, Andrei POPESCU wrote:
> Maybe libpam-ck-connector helps?
Alas no :/
— Jason
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/CA+Zd3FcaDWYQBnVii3
On Thu, Apr 5, 2012 at 5:05 AM, keith wrote:
> Jason Heeris wrote:
>>
>> user@my-live-usb:~$ pkexec true
>> Error executing command as another user: Not authorized
>>
>> This incident has been reported.
>
> Do you need to be root?
pkexec is like sudo so you don't need to be root but you do need t
On Wed, Apr 4, 2012 at 9:30 PM, Jason Heeris wrote:
> I'm building a Debian Squeeze system with live-builder 3.0~a45 (from
> Ubuntu 11.10). I'm running into a problem where I can't use udisk to
> mount devices using a serial console on the live system (perhaps due
>
Jason Heeris wrote:
My problem is this: when I try to use udisk to mount an image via a
serial console, I get:
user@my-live-usb:~$ udisks --mount /dev/disk/by-label/image-data
--mount-options ro
Mount failed: Not Authorized
I read through a heap of forum postings and bug reports, and
On Jo, 05 apr 12, 09:30:17, Jason Heeris wrote:
>
> So how do I get ConsoleKit to either recognise the serial console as
> active, or let udisks mount the partition?
Maybe libpam-ck-connector helps?
Kind regards,
Andrei
--
Offtopic discussions among Debian users and develop
I'm building a Debian Squeeze system with live-builder 3.0~a45 (from
Ubuntu 11.10). I'm running into a problem where I can't use udisk to
mount devices using a serial console on the live system (perhaps due
to problems with consolekit or policykit). Sorry for the cross-post -
I&#
On Mon, 23 May 2011 14:09:54 -0400, Chris Brennan wrote:
> How ironic ... the power blinked and that machine rebooted, when it came
> back up, I saw it boot via the serial console, but it would freeze
> during the boot process w/
>
> "Loading the saved-state of the serial dev
ction from a client other than windows
>> +putty? Just to start discarding culprits...
>
>
> No need now :D see above. Thanks for the obvious tip lol.
>
How ironic ... the power blinked and that machine rebooted, when it came
back up, I saw it boot via the serial console, but
On Mon, May 23, 2011 at 1:14 PM, Camaleón wrote:
On Mon, 23 May 2011 12:17:29 -0400, Chris Brennan wrote:
>
> > On Mon, May 23, 2011 at 12:07 PM, Camaleón wrote:
>
> (...)
>
> >> OTOH, /etc/inittab can be restarted/reloaded by issuing "telinit q", or
> >> at least that was what I used on another
On Mon, 23 May 2011 12:17:29 -0400, Chris Brennan wrote:
> On Mon, May 23, 2011 at 12:07 PM, Camaleón wrote:
(...)
>> OTOH, /etc/inittab can be restarted/reloaded by issuing "telinit q", or
>> at least that was what I used on another distributions, in Debian I'm
>> not sure if remains the same
On Mon, May 23, 2011 at 12:07 PM, Camaleón wrote:
115200 is a bit high speed rate, for testing I would lower that value and
> once it works, you can play with this.
>
Yeah, it is high, that was just my last change, I started at the typical
9600, went to 19200, 38400 and then 115200. All produces
On Sun, 22 May 2011 18:05:47 -0400, Chris Brennan wrote:
> I've embarked on the trial and error process of setting up a serial
> console on my Debian 6 machine. So far, the configuration has been
> pretty straight forward. As a reference point I used the following two
> websites
got no login when I tried to connect via serial.
>
> I have two Debian 4 boxes with the serial console working. It has been
> quite a while since I set this up, but I'm pretty sure that I just added
> this line to /etc/inittab and then restarted init:
>
> co:2345:respaw
> In a nut-shell, this is what is how my Debian box is configured (for serial
> console)
> root@leviathan:~# setserial -g /dev/ttyS[0123]> /dev/ttyS0, UART: 16550A,
Port: 0xdc00, IRQ: 16> /dev/ttyS1, UART: 16550A, Port: 0xdc00, IRQ: 16>
/dev/ttyS2, UART: unknown, Port: 0x03
I've embarked on the trial and error process of setting up a serial console
on my Debian 6 machine. So far, the configuration has been pretty straight
forward. As a reference point I used the following two websites
http://www.cyberciti.biz/faq/howto-setup-serial-console-on-debian-linux/
SOLVED: https://savannah.gnu.org/bugs/index.php?32115
Il 12 gennaio 2011 20:57, Niccolò Belli ha scritto:
> I'm sorry, it isn't Lenny, it's Squeeze (Debian unstable).
>
> Il 12 gennaio 2011 20:53, Niccolò Belli ha scritto:
>> Hi, I'm using an RS232 serial cons
I'm sorry, it isn't Lenny, it's Squeeze (Debian unstable).
Il 12 gennaio 2011 20:53, Niccolò Belli ha scritto:
> Hi, I'm using an RS232 serial console with Debian Lenny. Output works
> fine (I can see the output since grub starts), but input doesn't (both
> in
Hi, I'm using an RS232 serial console with Debian Lenny. Output works
fine (I can see the output since grub starts), but input doesn't (both
in grub and when it prompts for login).
Here is my /etc/default/grub:
[...]
GRUB_CMDLINE_LINUX_DEFAULT="quiet console=tty0 console
El vie, 06-11-2009 a las 19:08 +0100, Emanoil Kotsev escribió:
> What's your kernel line on boot?
>
> I have this one
>
> kernel /vmlinuz-2.6.26.2eko2 ro console=0,115200
>
I have this:
title Debian GNU/Linux, kernel 2.6.26-2-686
root(hd0,1)
kernel /boot/
Hello,
I have a few dell poweredge servers (with debian lenny) connected
through a serial port with a cyclades console server.
I can log in into the cyclades and connect to one of this server. Then,
I can see the boot of the server and so on.
The problem I have is that du
ure the bios, or if there is
no vga console it would be configured to output everything to the console
>
> if i can what program i can use to edit the debian dvd iso so i can edit
> the boot configuration
>
> many2 thanks
I would do following.
1) find out which speed the device sup
--- On Thu, 3/12/09, Tzafrir Cohen wrote:
From: Tzafrir Cohen
Subject: Re: It's possible to install Debian 5.0 using serial console?
To: debian-user@lists.debian.org
Date: Thursday, March 12, 2009, 1:39 PM
-Inline Attachment Follows-
On Thu, Mar 12, 2009 at 09:04:26AM
Tzafrir Cohen wrote:
> On Thu, Mar 12, 2009 at 09:04:26AM -0400, Celejar wrote:
>> On Thu, 12 Mar 2009 02:31:30 -0700 (PDT)
>> my mail wrote:
>>
>> >
>> > hi all
>> >
>> > I want install Debian 5.0, it possible to install Debi
On Thu, Mar 12, 2009 at 09:04:26AM -0400, Celejar wrote:
> On Thu, 12 Mar 2009 02:31:30 -0700 (PDT)
> my mail wrote:
>
> >
> > hi all
> >
> > I want install Debian 5.0, it possible to install Debian using serial
> > console just like another os fre
On Thu, 12 Mar 2009 02:31:30 -0700 (PDT)
my mail wrote:
>
> hi all
>
> I want install Debian 5.0, it possible to install Debian using serial console
> just like another os freebsd?
>
> if possible how to do it, thanks
Never done this, YMMV, these reference
hi all
I want install Debian 5.0, it possible to install Debian using serial console
just like another os freebsd?
if possible how to do it, thanks
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
On 23 Gen, 16:10, "Douglas A. Tutty" <[EMAIL PROTECTED]> wrote:
> at the grub level. The kernel, on the other hand, is finding the serial
> port at the same /dev/ttyS?. I don't know how to get grub to search for
Yes Doug,
the kernel option is still ttyS0 as before.
I'll look for information on
On Wed, Jan 23, 2008 at 06:11:20AM -0800, jimmi wrote:
> Hi,
>
> I'm using since several years the serial console to get the grub menu
> from a headless PC, that I configured following the instruction of the
> Remote Serial Console HOWTO [1]. I'm now replacing the
Hi,
I'm using since several years the serial console to get the grub menu
from a headless PC, that I configured following the instruction of the
Remote Serial Console HOWTO [1]. I'm now replacing the machine with a
mini-itx assembled with an Intel D201GLY2 board [2]. Using the same
con
to output messages to the serial port and
to the attached monitor. However messages from init and syslog only
appear on the last-listed console device
Quoted from
http://www.faqs.org/docs/Linux-HOWTO/Remote-Serial-Console-HOWTO.html#BUGS-MONITOR
About the login problem: look at something like t
Hi there,
I recently have been trying to debug some system freezes and have
implemented a serial console connected to a laptop. I am running Debian
Etch on the server.
When the system boots up using Grub, I get the menu on my serial
console and I can press "enter" to select which
current installer does not
> > seem to have a /boot/grub/grub.conf file, nor a /etc/grub.conf. The
> > HOWTOs for serial console all suggest that this is the right place to put
> > the lines:-
> >
> > serial --unit=0 --speed=9600
> > terminal --timeout=10 serial co
> HOWTOs for serial console all suggest that this is the right place to put
> the lines:-
>
> serial --unit=0 --speed=9600
> terminal --timeout=10 serial console
>
> (or whatever speed you want).
>
> I therefore created such a file (/boot/grub/grub.conf) but it had no
WTOs for serial console all suggest that this is the right place to put
> the lines:-
>
> serial --unit=0 --speed=9600
> terminal --timeout=10 serial console
>
> (or whatever speed you want).
>
> I therefore created such a file (/boot/grub/grub.conf) but it had no
> ef
> Given the way that grub has been built for Debian unstable where
> should these lines be?
/boot/grub/menu.lst
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Using Debian grub (unstable) where do I put the serial and terminal lines.
The /boot/grub directory as installed by the current installer does not
seem to have a /boot/grub/grub.conf file, nor a /etc/grub.conf. The
HOWTOs for serial console all suggest that this is the right place to put
the
e).
I can only connect to it via serial console.. When it boots up into
serial console, it seems to try sending VGA data to the serial port.
^^
Is there a way to get around this?
Best to direct Qs about d-i to the boot-floppies list wher
7;m trying to install Sarge over the net (booting netinstall via pxe).
> >>>I can only connect to it via serial console.. When it boots up into
> >>>serial console, it seems to try sending VGA data to the serial port.
> >>>
> >>>Is there a way to get
Brian Nelson wrote:
On Fri, Aug 27, 2004 at 10:08:43AM +0800, John Summerfield wrote:
[EMAIL PROTECTED] wrote:
I'm trying to install Sarge over the net (booting netinstall via pxe).
I can only connect to it via serial console.. When it boots up into
serial console, it seems to try se
On Fri, Aug 27, 2004 at 10:08:43AM +0800, John Summerfield wrote:
> [EMAIL PROTECTED] wrote:
>
> >I'm trying to install Sarge over the net (booting netinstall via pxe).
> >I can only connect to it via serial console.. When it boots up into
> >serial console, it see
[EMAIL PROTECTED] wrote:
Err, d-i?
Debian Installer
What you're (probably) using to install Sarge
On Fri, 27 Aug 2004, John Summerfield wrote:
[EMAIL PROTECTED] wrote:
I'm trying to install Sarge over the net (booting netinstall via pxe).
I can only connect to it via seri
That did the trick, Thanks!
Michael
> On Thu, 2004-08-26 at 23:43, [EMAIL PROTECTED] wrote:
> > I'm trying to install Sarge over the net (booting netinstall via pxe).
> > I can only connect to it via serial console.. When it boots up into
> > serial console, it seems
1 - 100 of 173 matches
Mail list logo
