Hello,
I have a few dell poweredge servers (with debian lenny) connected
through a serial port with a cyclades console server.
I can log in into the cyclades and connect to one of this server. Then,
I can see the boot of the server and so on.
The problem I have is that during the boot, while loading drivers, when
it loads serial driver, I get a lot of garbage and console doesn't work
until login (that is, I can't see messages displays by init.d scripts).
When login is run, it works again without any problem.
The garbage I get is:
[ 2.982482] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharingd
[ 2.991704] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.998232] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
��������������������������������������������������������������������������������
Debian GNU/Linux 5.0 felis116 ttyS0
felis116 login:
Then, I can't see anything until login is reached.
The cyclades configuration for this port is (I configured it as a
Console (Telnet) port):
s26.tty ttyS26
s26.alias felis116
s26.issue \r\n Welcome to Console Server Management Server %h port S
%p \n\r\n
s26.speed 115200
s26.datasize 8
s26.stopbits 1
s26.parity none
s26.flow none
s26.dcd 0
any idea?
--
Angel L. Mateo Martínez
Sección de Telemática
Área de Tecnologías de la Información _o)
y las Comunicaciones Aplicadas (ATICA) / \\
http://www.um.es/atica _(___V
Tfo: 868887590
Fax: 868888337
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
