>> i use i386 because the computer has 2Gb Ram memory only and was a present
Sounds like a good reason to me.
>> and to put 1Tb ssd and 8Gb Ram memory it’s the maximum I installed bullseye
>> i386 with the little memory..
I also run i386 on many of my machines, but note that for the machines
wit
El El dom, 11 jun 2023 a las 4:13, Aleix Piulachs
escribió:
>
>
> El El dom, 11 jun 2023 a las 3:56, David Christensen <
> dpchr...@holgerdanske.com> escribió:
>
>> On 6/10/23 17:06, Aleix Piulachs wrote:
>> > El El dom, 11 jun 2023 a las 0:38, David Christensen <
>> > dpchr...@holgerdanske.com>
El El dom, 11 jun 2023 a las 3:56, David Christensen <
dpchr...@holgerdanske.com> escribió:
> On 6/10/23 17:06, Aleix Piulachs wrote:
> > El El dom, 11 jun 2023 a las 0:38, David Christensen <
> > dpchr...@holgerdanske.com> escribió:
> >
> >> On 6/10/23 15:23, David Christensen wrote:
> >>> Does t
On 6/10/23 17:06, Aleix Piulachs wrote:
El El dom, 11 jun 2023 a las 0:38, David Christensen <
dpchr...@holgerdanske.com> escribió:
On 6/10/23 15:23, David Christensen wrote:
Does the Setup utility have any settings to control the fan? What are
the names of the settings, what options are avai
On 6/10/23 15:23, David Christensen wrote:
Does the Setup utility have any settings to control the fan? What are
the names of the settings, what options are available, and what are the
current settings?
Does the Setup utility have any settings related to processor energy
consumption? For e
On 5/29/23 19:56, Aleix Piulachs wrote:
> Computer hp compaq 6830s intel pentium dual cpu t3400
https://ark.intel.com/content/www/us/en/ark/products/35583/intel-pentium-processor-t3400-1m-cache-2-16-ghz-667-mhz-fsb-socket-p.html
Intel® 64 ‡ Yes
On 6/10/23 08:29, Aleix Piulachs wrote:
H Hallo
El El vie, 9 jun 2023 a las 3:02, Aleix Piulachs
escribió:
> i’ m with a hp 6830s computer bullseye i386
> and the fan services are not working.i write system to enable fancontrol
> and systemctl lm-sensors enable but worse when i write systemctl status
> fancontrol, i see Active failed Result ex
Aleix Piulachs wrote:
> i’ m with a hp 6830s computer bullseye i386
> and the fan services are not working.i write system to enable fancontrol
> and systemctl lm-sensors enable but worse when i write systemctl status
> fancontrol, i see Active failed Result exit-code and i write
> /usr/sbin/fancon
On 2/26/2014 1:38 AM, Stan Hoeppner wrote:
On 2/25/2014 3:28 PM, Jerry Stuckle wrote:
...
Encasing the tower in a sound
"Damping" not "dampening". To dampen something is to add moisture to
it. To damp an object is to lower its resonance frequency. One cannot
add moisture to sound waves thus
On 2/25/2014 3:28 PM, Jerry Stuckle wrote:
...
> Encasing the tower in a sound
"Damping" not "dampening". To dampen something is to add moisture to
it. To damp an object is to lower its resonance frequency. One cannot
add moisture to sound waves thus there is no such thing as "sound
dampening"
On 2/25/2014 4:16 PM, Stan Hoeppner wrote:
On 2/25/2014 9:53 AM, Dan wrote:
...
I didn't open the computer. I do not know if the fan connectors have 4
pin. I prefer not to open the computer. It is on warranty.
If you don't want to void the warranty, then don't monkey with the fan
speed or acc
On 2/25/2014 9:53 AM, Dan wrote:
...
> I didn't open the computer. I do not know if the fan connectors have 4
> pin. I prefer not to open the computer. It is on warranty.
If you don't want to void the warranty, then don't monkey with the fan
speed or accidentally shut any fans down for any amount
On 2/25/2014 3:47 AM, Dan wrote:
> I recently bought a workstation to do calculations. It has two Xeon
> processors with 16 cores and 32 threads in total. I realized that the
> temperature gets very high on high load typically 80C. That is way too
> much. Then I changed the fan speed in the bios f
On Tue, Feb 25, 2014 at 3:54 PM, Schrey wrote:
> Dan wrote:
>
>> I recently bought a workstation to do calculations. It has two Xeon
>> processors with 16 cores and 32 threads in total. I realized that the
>> temperature gets very high on high load typically 80C. That is way too
>> much. Then I c
Dan wrote:
I recently bought a workstation to do calculations. It has two Xeon
processors with 16 cores and 32 threads in total. I realized that the
temperature gets very high on high load typically 80C. That is way too
much. Then I changed the fan speed in the bios from auto to high. Now
tempera
15 matches
Mail list logo
