On 5/29/23 19:56, Aleix Piulachs wrote:
> Computer hp compaq 6830s intel pentium dual cpu t3400
https://ark.intel.com/content/www/us/en/ark/products/35583/intel-pentium-processor-t3400-1m-cache-2-16-ghz-667-mhz-fsb-socket-p.html
Intel® 64 ‡ Yes
On 6/10/23 08:29, Aleix Piulachs wrote:
H Hallo
i’ m with a hp 6830s computer bullseye i386
Why are you running 32-bit Debian? Your processor is 64-bit. I would
run 64-bit Debian:
http://cdimage.debian.org/cdimage/archive/11.7.0/amd64/iso-cd/debian-11.7.0-amd64-netinst.iso
and the fan services are not working.
Does the fan operate when you power up the computer?
Does the fan operate when you enter the Setup utility?
Does the Setup utility have a diagnostics page that shows the fan RPM?
If so, what is the fan RPM?
Does the Setup utility have any settings to control the fan? What are
the names of the settings, what options are available, and what are the
current settings?
i write system to enable fancontrol
and systemctl lm-sensors enable but worse when i write systemctl status
fancontrol, i see Active failed Result exit-code and i write
/usr/sbin/fancontrol —check and i see some mandatory settings are missing
and in /etc/fancontrol i have:
[Unit]
Description=Start fancontrol, if configured
ConditionFileNotEmpty=/etc/fancontrol
After=lm_sensors.service
[Service]
Type=simple
PIDFile=/var/run/fancontrol.pid
ExecStart=/usr/sbin/fancontrol
[Install]
WantedBy=multi-user.target hallo
English prose is ambiguous. Computer technical support requires facts.
Please provide console sessions, as I have done below.
Check the status of the systemd lm-sensors service:
2023-06-10 14:59:15 root@taz ~
# systemctl status lm-sensors
* lm-sensors.service - Initialize hardware monitoring sensors
Loaded: loaded (/lib/systemd/system/lm-sensors.service; enabled;
vendor pr>
Active: active (exited) since Sat 2023-06-10 14:33:01 PDT; 26min ago
Process: 816 ExecStart=/usr/bin/sensors -s (code=exited,
status=0/SUCCESS)
Process: 842 ExecStart=/usr/bin/sensors (code=exited, status=0/SUCCESS)
Main PID: 842 (code=exited, status=0/SUCCESS)
CPU: 4ms
Jun 10 14:33:01 taz sensors[842]: Adapter: ISA adapter
Jun 10 14:33:01 taz sensors[842]: Package id 0: +55.0 C (high = +80.0
C, crit>
Jun 10 14:33:01 taz sensors[842]: Core 0: +55.0 C (high = +80.0
C, crit>
Jun 10 14:33:01 taz sensors[842]: Core 1: +51.0 C (high = +80.0
C, crit>
Jun 10 14:33:01 taz sensors[842]: Core 2: +48.0 C (high = +80.0
C, crit>
Jun 10 14:33:01 taz sensors[842]: Core 3: +54.0 C (high = +80.0
C, crit>
Jun 10 14:33:01 taz sensors[842]: pch_cannonlake-virtual-0
Jun 10 14:33:01 taz sensors[842]: Adapter: Virtual device
Jun 10 14:33:01 taz sensors[842]: temp1: +39.0 C
Jun 10 14:33:01 taz systemd[1]: Finished Initialize hardware monitoring
sensors.
Check the status of the systemd fancontrol service:
2023-06-10 14:59:36 root@taz ~
# systemctl status fancontrol
Unit fancontrol.service could not be found.
fancontrol is not installed on my system. Look for a Debian package:
2023-06-10 15:02:10 root@taz ~
# apt-cache search fancontrol
fancontrol - utility to control the fan speed
Install the fancontrol Debian package:
2023-06-10 15:02:33 root@taz ~
# apt-get install fancontrol
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following NEW packages will be installed:
fancontrol
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 48.5 kB of archives.
After this operation, 108 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bullseye/main amd64 fancontrol all
1:3.6.0-7 [48.5 kB]
Fetched 48.5 kB in 0s (254 kB/s)
Selecting previously unselected package fancontrol.
(Reading database ... 151610 files and directories currently installed.)
Preparing to unpack .../fancontrol_1%3a3.6.0-7_all.deb ...
Unpacking fancontrol (1:3.6.0-7) ...
Setting up fancontrol (1:3.6.0-7) ...
Created symlink
/etc/systemd/system/multi-user.target.wants/fancontrol.service ->
/lib/systemd/system/fancontrol.service.
Processing triggers for man-db (2.9.4-2) ...
Check the status of the systemd fancontrol service:
2023-06-10 15:02:41 root@taz ~
# systemctl status fancontrol
* fancontrol.service - fan speed regulator
Loaded: loaded (/lib/systemd/system/fancontrol.service; enabled;
vendor pr>
Active: inactive (dead)
Condition: start condition failed at Sat 2023-06-10 15:02:41 PDT; 20s ago
`- ConditionFileNotEmpty=/etc/fancontrol was not met
Docs: man:fancontrol(8)
man:pwmconfig(8)
Jun 10 15:02:41 taz systemd[1]: Condition check resulted in fan speed
regulator>
Look for the configuration file:
2023-06-10 15:08:00 root@taz ~
# cat /etc/fancontrol
cat: /etc/fancontrol: No such file or directory
RTFM fancontrol(8):
CONFIGURATION
For easy configuration, there's a script named pwmconfig(8)
which lets
you interactively write your configuration file for fancontrol.
Alter-
natively you can write this file yourself using the
information from
this manpage.
I suggest that you RTFM fancontrol(8) and pwmconfig(8), and then run
pwmconfig(8).
David
p.s. RTFM fancontrol(8) I also see:
WARNING
Please be careful when using the fan control features of
your main-
board, in addition to the risk of burning your CPU, at higher
tempera-
tures there will be a higher wearout of your other hardware
components,
too. So if you plan to use these components in 50 years,
maybe you
shouldn't use fancontrol at all. Also please keep in mind
most fans
aren't designed to be powered by a PWMed voltage.
I allow the computer firmware to control fans. I use the Xfce panel
Sensor plug-in to monitor processor temperature. I suggest that you do
the same.
