On Wed, 29 Aug 2001, Ryan Kirkpatrick wrote:
> I am attempting to get a Matrox Millenium II card (4MB, PCI) to
> work with XFree86 3.6 (as found in potato), but no matter the resolution
> or color depth I choose, the picture has very obtrustive vertical lines
> (to the point that one can bar
On Thu, Aug 30, 2001 at 10:37:55AM +1000, Nick Croft wrote:
> Ryan,
> Look for the line
> Driver "mga"
> in the
> Section "Device" .
> I commented this line out to get it working. Since it now works that way,
> I haven't looked into the cause of the problem.
>
> Am sending the enti
Ryan,
Look for the line
Driver "mga"
in the
Section "Device" .
I commented this line out to get it working. Since it now works that way,
I haven't looked into the cause of the problem.
Am sending the entire XF86Config file separately.
Nick
On Wed, 8 Sep 1999, Jason Christensen wrote:
> The name of the debian SVGA Xfree86 X Server package is
> xserver-svga_3.3.2.3a-11.deb.
> It is part of slink r4. You'll of course need other packages as well: fonts,
> Xbase, etc. Dependencies should take care of that though.
>
> Jason
I had probl
ii xserver-svga3.3.4-2X server for SVGA graphics cards
this is from potato but slink also have xserver-svga. If you want to use a
newer one just download server binaries from ftp.xfree86.org and replease with
the one in /usr/X11R6/bin/XF86_SVGA, after you install the package.
On We
The name of the debian SVGA Xfree86 X Server package is
xserver-svga_3.3.2.3a-11.deb.
It is part of slink r4. You'll of course need other packages as well: fonts,
Xbase, etc. Dependencies should take care of that though.
Jason
>On Wed, 8 Sep 1999, Marcin Kurc wrote:
>
>> mg200 AGP is supported b
On Wed, 8 Sep 1999, Marcin Kurc wrote:
> mg200 AGP is supported by xf86. Use SVGA server, and XF86Setup or xf86config
> to set it up.
>
> On Wed, Sep 08, 1999 at 02:06:26PM -0600, Robert Kerr wrote:
> > Hi All,
> > Where can I find the .deb for the Above-mentioned video card?
> > Thanks
> >
y
mg200 AGP is supported by xf86. Use SVGA server, and XF86Setup or xf86config to
set it up.
On Wed, Sep 08, 1999 at 02:06:26PM -0600, Robert Kerr wrote:
> Hi All,
> Where can I find the .deb for the Above-mentioned video card?
> Thanks
>
> --
> -bob
>
> You know you've landed with the wheels u
-BEGIN PGP SIGNED MESSAGE-
[snip-snip]
On 3 Aug 1999, Martin Bialasinski wrote:
> * "Andreas" == Andreas Tille <[EMAIL PROTECTED]> wrote:
> >> 2) I think no, but I use the linux 2.2 framebuffer to get high
> >> resolution and refresh rate at the console
>
> It is a kernel option. Once com
* "Andreas" == Andreas Tille <[EMAIL PROTECTED]> wrote:
>> 2) I think no, but I use the linux 2.2 framebuffer to get high
>> resolution and refresh rate at the console
Andreas> Is this the prefered method. I'm a little bit slow in following
Andreas> new things and I'm not really sure, how to imp
On 3 Aug 1999, Martin Bialasinski wrote:
> Andreas> is the Matrox Millenium G200LE supported by the current
> Andreas> 1) XF86 drivers
> Andreas> 2) SvgaTextmode
> Andreas> 3) SvgaLib
>
> I have a G200 (don't know what the LE is suppose to be). So for the
> above items:
LE means somewhat "light"
* "Andreas" == Andreas Tille <[EMAIL PROTECTED]> wrote:
Andreas> is the Matrox Millenium G200LE supported by the current
Andreas> 1) XF86 drivers
Andreas> 2) SvgaTextmode
Andreas> 3) SvgaLib
I have a G200 (don't know what the LE is suppose to be). So for the
above items:
1) yes
2) I think no,
>> Hi all,
>>
>> Does anyone know if the Martox Millenium G200 is compatiable with XFree?
>> Its a
>> new AGP card, and I amd asking if it compatiable before I go out and buy it.
>> If not does anyone know where I could go and find out if it is?
Not yet. Xi Graphics do have an X server, but i
You need to upgrade to the xserver-svga 3.3.1 that's in hamm in order
to use the Matrox Millennium II effectively. Even after that you
should probably upgrade manually to 3.3.2 that you can get from
ftp.xfree86.org. All that needs to be replaced is the one XF86_SVGA
server file.
I am unable t
> You need to set up XKB properly for XSuSE. There should be some sort
> of error message about this when you run startx. The fix is basically
> making a link to a directory. After you do this, everything will work
> properly. It worked for me!
Thanks Ben,
I had XkbDisable i
>> I think Xinside Accelerated X 4.1 supports the Matrox Series. I thikn it is
>> overall better than XFree86 since most of the drivers are optimized for the
>> specific cards.
As far as I know the Millenium II also works with MetroX, and yet again it is
not free but it is a good package, and ver
"Ben Pfaff wrote:"
>I had problems with the Millenium II driver from XSuSE. The backspace
>key worked at the bash prompt, but not in vim. I use a version I
>downloaded from xfree86. I untarred it to a temp directory and copied
>the new XF86_SVGA file to /usr/X11R6/bin/XF86_SVGA a
I had problems with the Millenium II driver from XSuSE. The backspace
key worked at the bash prompt, but not in vim. I use a version I
downloaded from xfree86. I untarred it to a temp directory and copied
the new XF86_SVGA file to /usr/X11R6/bin/XF86_SVGA after moving the
old vers
Hi,
I had problems with the Millenium II driver from XSuSE. The backspace
key worked at the bash prompt, but not in vim. I use a version I
downloaded from xfree86. I untarred it to a temp directory and copied
the new XF86_SVGA file to /usr/X11R6/bin/XF86_SVGA after moving the
old version. The
I have a Matrox Millenium II PCI with 4 MB WRAM. One of the best
resource for information on how to upgrade and configure XFree86 for
the Millenium II is the Web site for the XFree86 Matrox Team at
http://matrox.alloy.net. I got it working with the Matrox Team's
download and installation instructio
I think Xinside Accelerated X 4.1 supports the Matrox Series. I thikn it is
overall better than XFree86 since most of the drivers are optimized for the
specific cards.
check it out youreself www.xinside.com
The package doesn't come free though. It cost $100 but I think it is well
worth it.
>
Lawrence <[EMAIL PROTECTED]> writes:
> Alex Yukhimets wrote:
> >
> > I am about to get a new P II system and had to decide on many
> > alterantives available. My current concern is what video card
> > would suit me the best. I have no doubt that I would go with AGP one
> > (even not for the sake o
Alex Yukhimets wrote:
>
> Hi.
>
> I am about to get a new P II system and had to decide on many
> alterantives available. My current concern is what video card
> would suit me the best. I have no doubt that I would go with AGP one
> (even not for the sake of performance, but to save PCI slot :)
>
On Wed, 7 May 1997 18:36:00 +0100 (BST), G. Kapetanios wrote:
>
>Hi ,
>
>Could someone please tell me the appropriate entries in XF86config
>for the matrix millenium graphics card ?
Make sure you are using at least XFree 3.2.this should all be set-up
for you.
---
On Wed, 7 May 1997 18:36:00 +0100 (BST), G. Kapetanios wrote:
>
>Hi ,
>
>Could someone please tell me the appropriate entries in XF86config
>for the matrix millenium graphics card ?
Make sure you are using at least XFree 3.2.this should all be set-up
for you.
---
> Does anyone out there know right off hand which chipset to choose when
> configuring X for the first time with a Matrox Millenium card?
mga2064, but the SVGA server will detect it automatically.
There are two things you might want to do. First check
http://www.bf.rmit.edu.au/~ajv/xf86-matrox.html for the info about XFree86
Matrox server. This info is made by the authors of the Matrox code in
XF86_SVGA server.
The second is that you should try XF86Setup which comes with the xserver-vga1
> > AUBORD Alain writes:
>
> Alain> I have some problems with my Matrox Millenium Video Card. I
> Alain> want to start X with the XFree 3.2 super vga server but I
> Alain> only get 320x200 display. The chip seems not to be recognized
> Alain> properly.
>
> AFAIK the current XFree has
> AUBORD Alain writes:
Alain> I have some problems with my Matrox Millenium Video Card. I
Alain> want to start X with the XFree 3.2 super vga server but I
Alain> only get 320x200 display. The chip seems not to be recognized
Alain> properly.
AFAIK the current XFree has a server for the
29 matches
Mail list logo
