On Fri, 24 Apr 1998, Hans Ehrbar wrote:
> But when I boot the machine it says: Network is unreachable
Can you send the outputs of ifconfig and route -n
These will show what your situation/problem is.
7~he 7~hought /|ssassin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
>From the Ethernet-HOWTO
3.6. Problems with 3Com cards
Problem: The 3c503 picks IRQ N, but this is needed for some other
device which needs IRQ N. (e
On Fri, 24 Apr 1998, Hans Ehrbar wrote:
> Thanks for the quick response, Ossama.
> I did configure the network and I do have a file
> /etc/init.d/network which has my IPADDR and NETMASK etc.
> but I haven't found any files with any of the information
> about the network card specified during insta
(The subject line is a bit misleading, don't you think?)
Hans> loading device 'eth0'...
Hans> eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 e7 06 66, IRQ 3
Hans> 3c509.c:1.07 6/15/95 [EMAIL PROTECTED]
Hans> But when I boot the machine it says: Network is unreachable
Is your network
Hi Hans,
> Thanks for the quick response, Ossama.
No problem. :)
> but I haven't found any files with any of the information
> about the network card specified during installation.
> Where should it be?
I'm not sure what you mean so I'll try to answer several questions:
- If you mean during in
Hi,
> loading device 'eth0'...
> eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 e7 06 66, IRQ 3
> 3c509.c:1.07 6/15/95 [EMAIL PROTECTED]
>
> But when I boot the machine it says: Network is unreachable
It sounds like your gateway hasn't been configured. Have you configured
your gate
6 matches
Mail list logo
