I'm trying to install a Linksys WPC11 v4 CardBus card on my IBM 240z
laptop. I'm running debian with a custom 2.4.27 kernel and
pcmcia-modules 3.2.5-10 module installed from the .deb source package.
The card uses the Realtek rtl8139 chipset (confirmed by runing 'cardctl
ident'
irection (from the router to another
> machine) i can
> copy only with 2-300KByte/s.
Last time I experienced something like this the rtl8139 was faulty
(some people say they are all buggy right when they are shipped).
Cheers,
Flo
signature.asc
Description: Digital signature
-- Továbbított levél --
Dátum: Sat, 14 Aug 2004 13:35:24 +0200 (CEST)
Feladó: Na Zo <[EMAIL PROTECTED]>
Címzett: [EMAIL PROTECTED]
Tárgy: 2 questions: 1., ipfwadm, 2., local net with rtl8139
hi!
1., I' d like to use ipmasquerading to share the internet,
but i have
prob
hi!
1., I' d like to use ipmasquerading to share the internet, but i have
problem with it. I have installed the following modules into the kernel
IP: Netfilter Configuration --->
Connection tracking (required for masq/NAT)
FTP protocol support
IRC protocol support
IP ta
Micha Feigin wrote:
Is it possible to force the rtl8139 card (8139too module) to do 10Mbps
half duplex with no auto negotiation using module options instead of
one of the external programs?
It looks like the media option may be able to do it but couldn't get it
to work.
I am currently usin
Is it possible to force the rtl8139 card (8139too module) to do 10Mbps
half duplex with no auto negotiation using module options instead of
one of the external programs?
It looks like the media option may be able to do it but couldn't get it
to work.
I am currently using the ethtool progra
Thanks for the reply. Still having a few issues..
kryten:~# ethtool -s eth0 speed 100 duplex full autoneg off
kryten:~# reboot
kryten:~# grep eth0 /var/log/dmesg
eth0: RealTek RTL8139 at 0xe080, 00:e0:4c:e9:5b:db, IRQ 11
eth0: Identified 8139 chip type 'RTL-
On Tue, Jun 29, 2004 at 12:36:01AM +1000, Gerard Sharpe wrote:
>
>Hi, I am after some advice for setting a RTL8139 NIC to 100MB full duplex on a
> non-modular kernel.
>
>
>I can do this with a modular kernel, but am not sure how to go about it on a
> monolithic
Hi, I am after some advice for setting a RTL8139 NIC to
100MB full duplex on a non-modular kernel.
I can do this with a modular kernel, but am not sure how to
go about it on a monolithic kernel. The mii-tool does not seem to support the
rtl8139 driver installed with the 2.4.26 kernel
Uwe Dippel wrote:
> IMHO someone in here was right: module - IP - routing. We haven't had it
> on routing yet.
I simply have no idea how to do this. But I just found this very
interesting post, which leads me to believe that the problem is
unrelated to the particular device:
From
http://cert.uni
ur ISP ?
IMHO someone in here was right: module - IP - routing. We haven't had it
on routing yet.
> I have reinstalled Woody about ten times now in one week,
Did you happen to try the bf2.4 option as well ? If yes, how did it go
with your RTL8139 ?
If you get this one running, you can ea
On Sunday 28 December 2003 12:30 pm, Charles Muller wrote:
>I have one more thought on the matter of trying to get my rtl8139 NIC
>going on the 2.4 kernel (which may have been painfully obvious to most
>of you...).
I'm using the 8139too module w/o problems under 2.4.23 and 2.6.0
I have one more thought on the matter of trying to get my rtl8139 NIC
going on the 2.4 kernel (which may have been painfully obvious to most
of you...).
Whenever I have tried to configure the card in 2.4 using modconf or
pppoeconf, the message I always get is not a "not found" but inste
Uwe Dippel wrote:
> > But thanks for offering your solution. I appreciate it.
>
> With pleasure, from my side. I'm still curious, though, what the outcome
> of removing the modules with modconf, reboot, and re-insert of the rtl8139
> module would be.
> >From what you
> With pleasure, from my side. I'm still curious, though, what the
> outcome of removing the modules with modconf, reboot, and re-insert
> of the rtl8139 module would be.
> From what you wrote, it seems a Debian-only problem. A bug,
> eventually ?
Entering this really late,
moving.
Not being a fan of modconf, I nevertheless seem to remember that you can
uninstall modules by selecting an installed module, OK, and it
uninstalls (if my fading memory doesn't play tricks on me).
> Also, I don't
> know where I would get a new copy of the rtl8139
>
On 12/28/2003, "Uwe Dippel" <[EMAIL PROTECTED]> wrote:
>With pleasure, from my side. I'm still curious, though, what the outcome
>of removing the modules with modconf, reboot, and re-insert of the
rtl8139
>module would be.
When I run modconf from the comma
Two other things that I noticed, which can be seen in the output data I
posted in my prior message, but which I did not really stress:
1)
a) When I do a search for 8139too, the actual module file, which is
8139too.o, was found in the directory for the 2.2 kernel.
b) Since I selected the 81
t; must be a solution to this in the kernel or network configuration
> somewhere...
>
> But thanks for offering your solution. I appreciate it.
With pleasure, from my side. I'm still curious, though, what the outcome
of removing the modules with modconf, reboot, and re-insert of the
s. keeling wrote:
> Incoming from Charles Muller:
> > inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
> ^^
> > Interrupt:11 Base address:0x2000
> .^^^
Incoming from Charles Muller:
> Uwe Dippel wrote:
>
> (with 2.2.20 kernel: network connection functioning)
>
> debian:/home/chuck# ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 00:90:F5:1F:3B:BA
> inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
^
Have you tried a modconf,
uninstalling and re-installing the rtl8139 ? I'd be curious if the
re-install succeeds. If there were dependencies (mii), it should come up
with it.
Last, you should set your BIOS to non-PnP, if it isn't yet. 2.4 is not
fully PnP.
--
To UNSUBSCRIBE, email to [
Bill Kalebaugh
> If I go to to the BIOS on start-up (DELETE Button) and "Load Fail-Safe
> Defaults" Debian with 2.4.xx
> will ping all other boxes OK and I can go to the Internet OK.
Hmmm. My BIOS setup utility doesn't seem to have these options. Is there
more than one way of setting the BIOS?
SOLVED
If I go to to the BIOS on start-up (DELETE Button) and "Load Fail-Safe
Defaults" Debian with 2.4.xx
will ping all other boxes OK and I can go to the Internet OK. All though
I noticed that W2K will not
start up but W-98 will.
If I "Load Optimized Defaults" in BIOS than Debian 2.4.xx will
I have the exact same problem and I have tried ever thing I can think of.
If you ever find an answer let me know. I am beginning to think that
2.4.xx is
unable to understand all of the mother board devices I have on this board.
You never said what mother board and bios you have.
I have a SOYO KT40
Uwe Dippel wrote:
> > unix
> > af_packet
> > 8139too
>
> module is here, good ! (Does it need mii, maybe someone could help if
> necessary !?)
[...]
> eth0 doesn't have an address, just as I thought. And hasn't passed a
> single packet so far.
>
> Let's try giving it an address: ifconfig eth0
On Sat, 27 Dec 2003 01:15:05 +0900, Charles Muller wrote:
> debian:/home/chuck# cat /etc/modules
> # /etc/modules: kernel modules to load at boot time.
> #
> # This file should contain the names of kernel modules that are
> # to be loaded at boot time, one per line. Comments begin with
> # a "#",
Uwe Dippel wrote:
> How about showing us your cat /etc/modules and ifconfig for a change
> to the better ?
These are as follows:
debian:/home/chuck# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be lo
ebian kernel: PCI: Enabling device 00:0a.0 ( -> 0003)
> Dec 26 17:53:02 debian kernel: PCI: Found IRQ 11 for device 00:0a.0
> Dec 26 17:53:02 debian kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x2000,
> 00:90:f5:1f:3b:ba, IRQ 11
> [...]
> ... and so I am guessing that I am
rtl8139 nic. The driver (8139too) was compiled, but it won't
Had the same problem until I ras lspci and noticed the USB controller
was using the same IRQ as my NIC. Changing IRQ's fixed it.
When I run lspci I get this:
bash-2.05a$ lspci
00:00.0 Host bridge: Silicon Integrat
Wayne Topa wrote:
> Charles Muller([EMAIL PROTECTED]) is reported to have said:
> > I upgraded my 2.2* Woody kernel to 2.4.20 to get support for my external
> > USB drive. I succeeded, but in the process lost my network connection
> > via my rtl8139 nic. The driver (8139t
26 17:53:02 debian kernel: Floppy drive(s): fd0 is 1.44M
Dec 26 17:53:02 debian kernel: FDC 0 is a National Semiconductor PC87306
Dec 26 17:53:02 debian kernel: 8139too Fast Ethernet driver 0.9.24
Dec 26 17:53:02 debian kernel: PCI: Enabling device 00:0a.0 ( -> 0003)
Dec 26 17:53:02 debian ke
Incoming from Charles Muller:
> Wayne Topa wrote:
>
> > Charles Muller([EMAIL PROTECTED]) is reported to have said:
> > > I upgraded my 2.2* Woody kernel to 2.4.20 to get support for my external
> > > USB drive. I succeeded, but in the process lost my network conne
in the process lost my network connection
> > > via my rtl8139 nic. The driver (8139too) was compiled, but it won't
> > > connect.
> >
> > Had the same problem until I ras lspci and noticed the USB controller
> > was using the same IRQ as my NIC. Changing IRQ'
Wayne Topa wrote:
> Charles Muller([EMAIL PROTECTED]) is reported to have said:
> > I upgraded my 2.2* Woody kernel to 2.4.20 to get support for my external
> > USB drive. I succeeded, but in the process lost my network connection
> > via my rtl8139 nic. The driver (8139too)
Charles Muller([EMAIL PROTECTED]) is reported to have said:
> I upgraded my 2.2* Woody kernel to 2.4.20 to get support for my external
> USB drive. I succeeded, but in the process lost my network connection
> via my rtl8139 nic. The driver (8139too) was compiled, but it won&#x
I upgraded my 2.2* Woody kernel to 2.4.20 to get support for my external
USB drive. I succeeded, but in the process lost my network connection
via my rtl8139 nic. The driver (8139too) was compiled, but it won't
connect.
Googling, I found a number of threads on this, going back as far as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, Jul 31, 2003 at 10:08:55AM +0700, Agung Suyono wrote:
> I'm a new Debian user. I got a problem on istallation. My network
> device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
The installer doesn't do det
On Thu, 2003-07-31 at 00:44, Andrew McGuinness wrote:
> Agung Suyono wrote:
> > Hi All,
> >
> > I'm a new Debian user. I got a problem on istallation. My network
> > device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
> > When I tried t
Agung Suyono wrote:
Hi All,
I'm a new Debian user. I got a problem on istallation. My network
device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
When I tried to configure it using "Configure Device Driver Module"
during installation process, it asked me to
* Agung Suyono <[EMAIL PROTECTED]> [030731 13:32]:
> About the kernel and output of lspci, I'm afraid I can not answer
> because I don't know how to obtain the information about the kernel
> and there's no meaningful output when I type lspci from the console.
No meaningfull output from lspci!
Hi Agung,
Agung writes:
> The error message that I got was:
>
> =
> Installing module 8139too. If the device isn't there, or isn't
> confugred correctly, this could cause your system to pause for up to a
> minute.
The reason you are receiving this error me
Agung Suyono wrote:
> Hi,
>
> Thanks Antony for your response.
>
> The error message that I got was:
>
> =
> Installing module 8139too. If the device isn't there, or isn't
> confugred correctly, this could cause your system to pause for up to a
> minute.
>
> /li
a new Debian user. I got a problem on istallation. My network
device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
When I tried to configure it using "Configure
Device Driver Module" during installation process, it asked me to
enter a command line argument. The installatio
On Wed, 2003-07-30 at 22:08, Agung Suyono wrote:
> Hi All,
>
> I'm a new Debian user. I got a problem on istallation. My network
> device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
> When I tried to configure it using "Configure
> Device Driver
Agung Suyono wrote:
> Hi All,
>
> I'm a new Debian user. I got a problem on istallation. My network
> device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
> When I tried to configure it using "Configure
> Device Driver Module" during installatio
Hi All,
I'm a new Debian user. I got a problem on istallation. My network
device, Realtek RTL8139 PCI Fast Ethernet Adapter, was not detected.
When I tried to configure it using "Configure
Device Driver Module" during installation process, it asked me to enter
a command line
On Tuesday 11 March 2003 17:23, Donald Spoon wrote:
> I have lost the OP's message, so I will reply to this one instead in the
> hopes it gets seen.
http://lists.debian.org/debian-user/2003/debian-user-200303/msg02001.html
> Over the last 4-5 months of monitoring this list, I have seen a
> "hand
On Tuesday 11 March 2003 14:57, Jonathan Matthews wrote:
> [snip rtl8139 problems]
>
> No idea if this is feasible here, but my favourite way of solving 8139
> problems is to put a decent nic in the box (Intel EtherExpress, Tulip,
> LinkSys - maybe, etc.) and ignore the PoS RTL
On Wed, Mar 12, 2003 at 07:07:22PM +0100, PeterG wrote:
> "Jonathan Matthews" <[EMAIL PROTECTED]> schrieb im
> Newsbeitrag news:[EMAIL PROTECTED]
> > On Tue, Mar 11, 2003 at 11:07:10AM -0500, Fraser Campbell wrote:
> > > Hi,
> > [snip rtl8139 problems]
&g
Hi,
this cant´t be the solution.
I´m suffering and going crazy about this problem.
I have a 3com 3c905b!
peter
"Jonathan Matthews" <[EMAIL PROTECTED]> schrieb im
Newsbeitrag news:[EMAIL PROTECTED]
> On Tue, Mar 11, 2003 at 11:07:10AM -0500, Fraser Campbell wrote:
>
Jonathan Matthews wrote:
On Tue, Mar 11, 2003 at 11:07:10AM -0500, Fraser Campbell wrote:
Hi,
[snip rtl8139 problems]
No idea if this is feasible here, but my favourite way of solving 8139
problems is to put a decent nic in the box (Intel EtherExpress, Tulip,
LinkSys - maybe, etc.) and ignore
Hi
I also have a rtl8139 card. It works perfectly well for me. I compiled
kernel 2.4.18 from unstable(which i am running) with support for the
rtl8139 card. Had no problems with getting the 8139too driver probed.
Worked first time around.
I am to a certain degree a newbee, but are you sure the
On Tue, Mar 11, 2003 at 11:07:10AM -0500, Fraser Campbell wrote:
> Hi,
[snip rtl8139 problems]
No idea if this is feasible here, but my favourite way of solving 8139
problems is to put a decent nic in the box (Intel EtherExpress, Tulip,
LinkSys - maybe, etc.) and ignore the PoS RTL.
Seriou
Hi,
First off, is this the correct place to get answers on kernel/driver problems?
Should I instead post to debian-boot, should I email the kernel maintainer,
or should I submit a bug report?
Now the problem ... I recently purchased a Gigabyte GA-8SIMLH motherboard. It
has an onboard network
"Anita Chawla Hasija" <[EMAIL PROTECTED]> writes:
> Hi,
> I am trying to compile a linux driver module out of your rtl8139.c =
> source for my rtl8139 based cardbus NIC, but cannot succeed.
> The compile fails and giving error "pcmcia/driver_ops.
Hi,
I am trying to compile a linux
driver module out of your rtl8139.c source for my rtl8139 based cardbus NIC, but
cannot succeed.
The compile fails
and giving error "pcmcia/driver_ops.h : no such file or directory. " I am
working on slackware linux 2.0.30.I tried t
hello,
i have a pc at home running woody. this weekend, i did an apt-get
install kernel-image-2.4.12-k6 ... i'm running a k6-2 cpu. i loved it.
i have another box on the 'net running potato. it has a d-link nic
that uses rtl8139. now, i had that same nic in the box at home and us
may be enabled as the default driver in the next
> > woody installation system (boot floppies).
>
> Well, on the same box, with both compiled as modules, having "alias eth0
> rtl8139" in /etc/modules.conf works fine, but then changing that to 8139too
> crashes the box at
ppies).
Well, on the same box, with both compiled as modules, having "alias eth0
rtl8139" in /etc/modules.conf works fine, but then changing that to 8139too
crashes the box at "ifup -a" time. This is with 2.2.20 straight from
uk.kernel.org.
Incidentally, if anyone's got
I've installed potato r3 onto a K6/300 that hopefully one day will be an
ADSL router. I'm trying to use either a D-Link 528 or a D-Link 530TX+. The
installer was able to add the rtl8139 driver and when I use insmod rtl8139.o
I get:
rtl8139.o: init_module: Device or resource busy
).
Both are fine, as it still works on our server running 2.2.19 with one
with rtl8139 and a workstation with 8139too. 8139too, however,
promises more.
Speaking of woody, looks like its release is going to be real soon,
isn't it? (or better yet still hope
On Saturday 08 December 2001 11:56, Eduard Bloch wrote:
> Hello,
>
> I would like to know which of these drivers works better for people in
> kernel 2.2.x.
>
> Reason: one of them may be enabled as the default driver in the next
> woody installation system (boot floppies).
>
> Gruss/Regards,
> Edua
Hello,
I would like to know which of these drivers works better for people in
kernel 2.2.x.
Reason: one of them may be enabled as the default driver in the next
woody installation system (boot floppies).
Gruss/Regards,
Eduard.
--
Flüssigseifenbenutzer!
Fristeneinhalter!
Geschenkpapierbügler!
Au
On Tue, 23 Oct 2001, Manish Shah wrote:
> hi everyone,
> I have just installed debian and now need to get my
> network up and running...I have a realtek RTL8139(A)
> PCI fast ethernet card. Please do let me know where I
> can find the driver and directions for installing it..
[Tue, Oct 23, 2001 at 12:12:13AM -0700] Manish Shah :
> I have a realtek RTL8139(A) PCI fast ethernet card. Please do let me
> know where I can find the driver and directions for installing it
Load the module '8139too.o' either via the modconf front-end or via the
modules.con
> I have just installed debian and now need to get my
> network up and running...I have a realtek RTL8139(A)
> PCI fast ethernet card. Please do let me know where I
> can find the driver and directions for installing it..
> thanks a lot...
> -manish
>
> __
hi everyone,
I have just installed debian and now need to get my
network up and running...I have a realtek RTL8139(A)
PCI fast ethernet card. Please do let me know where I
can find the driver and directions for installing it..
thanks a lot...
-manish
ia/driver_ops.h built? where
> should this file come from?
On kernel 2.4.5...
[EMAIL PROTECTED]:/usr/src$ find . -name 'driver_ops.h'
./linux-2.4.5/include/pcmcia/driver_ops.h
> I contacted Donald Becker, author of rtl8139.c et al. and he told me I need
> to install the pcm
-
From: Schwerzmann, Stephan <[EMAIL PROTECTED]>
To: ;
Sent: Thursday, July 19, 2001 10:18 AM
Subject: rtl8139.c - compile problems for cardbus driver module
> - -
> to debian-user@lists.debian.org & debian-laptop@lists.debian.org
> - -
>
> Hello,
>
> I a
- -
to debian-user@lists.debian.org & debian-laptop@lists.debian.org
- -
Hello,
I am trying to compile a linux driver module out of your rtl8139.c source
for my rtl8139 based cardbus NIC, but cannot succeed.
I've read and followed the instructions "Installing individu
[EMAIL PROTECTED] wrote on Fri Jun 08, 2001 at 09:22:58AM:
>
> i´ve tried to add rtl8139 within the make menuconfig dialogue to my 2.2.19
> kernel.
> but it isn´t there
> further i could not find a header file for the rtl8139.c file
IIRC the driver is now 8139too and you need to h
;
> i´ve tried to add rtl8139 within the make menuconfig dialogue to my 2.2.19
> kernel.
> but it isn´t there
> further i could not find a header file for the rtl8139.c file
>
> can anybody help me on this
>
> markus
>
> --
> To UNSUBSCRIBE, email to [EMAIL PR
hi there,
i´ve tried to add rtl8139 within the make menuconfig dialogue to my 2.2.19
kernel.
but it isn´t there
further i could not find a header file for the rtl8139.c file
can anybody help me on this
markus
e there is a
>reason why 8139too was written (it's newer right?)
The rtl8139 driver has always been experimental. 8139too is the new
driver which is only marked as experimental in the sources and not in
the kernel konfig. 2.4 has 8139too only. See it as
was written (it's newer right?)
Take a look at http://www.scyld.com/network/rtl8139.html
Cheers,
--
Email: [EMAIL PROTECTED] Tel: +44 1908 653 739 Fax: +44 1908 655 151
Snail: David Wright, Earth Science Dept., Milton Keynes, England, MK7 6AA
Disclaimer: These addresses are only f
zwar erkannt, aber nicht korrekt initialisiert wird (kein link
> >beat).
>
> Sorry, didn't mean to post that to the list. I need to wear a paper
> bag for some time.
>
> What I wrote is: 2.2.19 has both rtl8139 and 8139too, and sourceforge
> has a even later 8139too for 2.4.3 w
On Sat, Mar 31, 2001 at 01:53:11PM +0200, Tomas Nalevajko wrote:
> Hi,
>
> could somebody plz help me with this. If I want to insert rtl8139.o or
> when I run update-modules there are error messages: unresolved symbols. I
> have latest debian stable version but I needed new xse
Hi,
could somebody plz help me with this. If I want to insert rtl8139.o or
when I run update-modules there are error messages: unresolved symbols. I
have latest debian stable version but I needed new xserver because my
RIVA TNT2 card, so I installed lots of packages from testing version. I
spend
On Thu, 13 Jan 2000, aphro wrote:
: it is in there, i use it currently...enable support for i "PCI VLB and
: onboard adapters" i think the option is and a new set of NICs will show
: including the rtl8139.
It's also necesary to choose "Y" when asked about Experim
it is in there, i use it currently...enable support for i "PCI VLB and
onboard adapters" i think the option is and a new set of NICs will show
including the rtl8139.
nate
On Thu, 13 Jan 2000, Tim Nicholas wrote:
tim >Hey there all,
tim >
tim >I have just been trying to c
Tim Nicholas <[EMAIL PROTECTED]> writes:
> I have just been trying to compile a new kernel (2.2.14) but i can not
> find the option to add support for the rtl8139 chipset 10/100 cards.
> They are reltivly common and there is documentation for them with the
> source but not th
Hey there all,
I have just been trying to compile a new kernel (2.2.14) but i can not
find the option to add support for the rtl8139 chipset 10/100 cards.
They are reltivly common and there is documentation for them with the
source but not the option to select in either 'make menuconfi
it doesnt appear as an option in the kernel that
>> slink comes with (2.2.12 currently -- using the CD from the new
>> O'reilley book) even tho the rtl8139.c file is there(it failed
>> to compile as a module for some reason)
Alexis> The 2.2.12 kernel does have
Hello!
On Wed, Oct 20, 1999 at 10:42:48PM -0700, aphro wrote:
> curious as to why there was no realtek 8139 driver included in slink. and
> it doesnt appear as an option in the kernel that slink comes with (2.2.12
> currently -- using the CD from the new O'reilley book) even tho t
On Wed, 20 Oct 1999, aphro wrote:
: curious as to why there was no realtek 8139 driver included in slink. and
: it doesnt appear as an option in the kernel that slink comes with (2.2.12
: currently -- using the CD from the new O'reilley book) even tho the
: rtl8139.c file is there(it f
2.0.36 kernel works great. (has a rtl8139 module)
i wish i knew why O'Reilley (sp?) chose 2.2.12 to be the default
kernel..the other 2.1r3 slink cd i have (burned from downloaded
ISO) defaults to 2.0.36(i believe)
btw besides this minor hiccup that book/cd combo rules. even tho i know
d
curious as to why there was no realtek 8139 driver included in slink. and
it doesnt appear as an option in the kernel that slink comes with (2.2.12
currently -- using the CD from the new O'reilley book) even tho the
rtl8139.c file is there(it failed to compile as a module for some reason)
Nils Rennebarth wrote:
> > Could someone give me the options I should use to force it to 10 MBits ?
> Use the driver as a module, don't use a driver compiled directly into the
> kernel (Or use lilo to pass options to the driver but I won't describe that
> here) Then u
ly into the
kernel (Or use lilo to pass options to the driver but I won't describe that
here) Then use the line
rtl8139 options=0x02 full_duplex=1
The "0x02" comes from the following definition:
/* Media selection options. */
enum {
IF_PORT_UNKNOWN = 0,
Hi,
I really need help on getting two network cards to work. I'm able to
work with them on Windows NT and on
Linux(only if I had, initially, started first with NT :-(( ).
What happens:
[Machine1] [Machine2]
1. Start this machine
John Foster wrote:
> I do not know if this will help but I have one of these cards and I had
> to use a DOS program to "set the card id number"in its hardware
> registers. Windows 98 sets it automatically but not in the hardware
> registers. Windows NT and Linux does not set it at all. I had the s
need to build a custom 2.2 kernel.
> Try to build it as a module and put rtl8139 in /etc/modules
I'm using kernel 2.2.10
Putting rtl8139 line in /etc/modules didn't anything (don't know why).
Meanwhile when compiling as module
I've got from syslog file:
cut here --
On Mon, Aug 09, 1999 at 09:10:25AM -0500, John Foster wrote:
> "Nuno Emanuel F. Carvalho" wrote:
> > I'd two machines at home and I'm unable to get them working both on
> > linux.
Which kernel do you use? You will need to build a custom 2.2 kernel.
Try to buil
"Nuno Emanuel F. Carvalho" wrote:
>
> Hi,
>
> I'd two machines at home and I'm unable to get them working both on
> linux.
_
I do not know if this will help but I have one of these cards and I had
to use a DOS program to "set the card id number"in its
00 782d 05e1 4441 0001
.
Basic mode control register 0x1100: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner can do 4441: Flow-control 10baseT-FD.
If the machine running NT is rebooted and starts running linux, I'm able
to get RTL8139
?
>
> CU
> Frank
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
yes it is in : /lib/libNoVersion.so.1
this happend after installing X (3.3.3.1-? -> 3.3.3.1-3)
Since this time I can't use the up arrow key to find the previous commande in a
xt
Khalid EZZARAOUI <[EMAIL PROTECTED]> writes:
> Bonjour,
>
> I have a problem about rtl8139 (ethernet card) option in the compilation
> of the kernel.
> rtl8139 is in the kernel source but not available in make xconfig.
> How to compil it anyway ?
Did you activate "
Bonjour,
I have a problem about rtl8139 (ethernet card) option in the compilation
of the kernel.
rtl8139 is in the kernel source but not available in make xconfig.
How to compil it anyway ?
other question :
after an upgrade a get this from ldconfig
ldconfig: warning: can't open
99 matches
Mail list logo
