On Fri, 24 Apr 1998, Hans Ehrbar wrote:
> But when I boot the machine it says: Network is unreachable
Can you send the outputs of ifconfig and route -n
These will show what your situation/problem is.
7~he 7~hought /|ssassin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
>From the Ethernet-HOWTO
3.6. Problems with 3Com cards
Problem: The 3c503 picks IRQ N, but this is needed for some other
device which needs IRQ N. (e
Thanks to Ossama's and Gilbert's advice, I could fix my
problem by adding a line consisting of the string 3c509 to
the /etc/modules file.
Apparently the install program never wrote this string
into the file because I had failed to install a network card
altogether when I originally built the base
On Fri, 24 Apr 1998, Hans Ehrbar wrote:
> Thanks for the quick response, Ossama.
> I did configure the network and I do have a file
> /etc/init.d/network which has my IPADDR and NETMASK etc.
> but I haven't found any files with any of the information
> about the network card specified during insta
(The subject line is a bit misleading, don't you think?)
Hans> loading device 'eth0'...
Hans> eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 e7 06 66, IRQ 3
Hans> 3c509.c:1.07 6/15/95 [EMAIL PROTECTED]
Hans> But when I boot the machine it says: Network is unreachable
Is your network
Hi Hans,
> Thanks for the quick response, Ossama.
No problem. :)
> but I haven't found any files with any of the information
> about the network card specified during installation.
> Where should it be?
I'm not sure what you mean so I'll try to answer several questions:
- If you mean during in
Thanks for the quick response, Ossama.
I did configure the network and I do have a file
/etc/init.d/network which has my IPADDR and NETMASK etc.
but I haven't found any files with any of the information
about the network card specified during installation.
Where should it be?
> On Fri, 24 A
Hi,
> loading device 'eth0'...
> eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 e7 06 66, IRQ 3
> 3c509.c:1.07 6/15/95 [EMAIL PROTECTED]
>
> But when I boot the machine it says: Network is unreachable
It sounds like your gateway hasn't been configured. Have you configured
your gate
I just got through the ordeal of installing debian linux
from floppies on an older computer, but linux cannot find my
network card. When installing the device drivers, the menu
first told me that I did not have any network cards, i.e.,
there was a - sign in front of the line for my 3C509 card.
Af
9 matches
Mail list logo
