Oh, just for reference turns out reinstalling with the cdset that uses
the 2.4 kernel fixed this invisibly...
*shrug* :)
=
-Alice
"Also _cute_ and _fluffy_!!!" (from Lilo and Stitch)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Sep 06, 2003 at 06:42:27PM +0200, Roberto Sanchez wrote:
> If you are using an ethernet connection to the modem, then most likely you
> need to enable the DHCP server in the modem.
Nope. It's handled by Comcast's headends. Comcast is prett
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Sep 06, 2003 at 09:11:47AM -0700, Alice Pinard wrote:
> I realize that there's other information that may be necessary but I'm not
> sure what else might be particularly relevant at this pint
What does /etc/network/interfaces look like? And w
On Sat, Sep 06, 2003 at 09:11:47AM -0700, Alice Pinard wrote:
> hi, I'm trying to set up a firewall to connect to my cable modem ISP
> (comcast) using DHCP
...
> I am getting a 'weirdness' and I'm not sure if it's on the DHCP end or the
> ethernet end.
>
> Basically if I do an ifconfig the etherne
--- Alice Pinard <[EMAIL PROTECTED]> escribió:
> hi, I'm trying to set up a firewall to connect to my cable modem ISP
> (comcast) using DHCP
>
> I've got a 3c905 ethernet card and I've got the 3c59x module running. I've
> got the auto eth0 and iface eth0 inet dhcp lines in the
> /etc/network/int
hi, I'm trying to set up a firewall to connect to my cable modem ISP
(comcast) using DHCP
I've got a 3c905 ethernet card and I've got the 3c59x module running. I've
got the auto eth0 and iface eth0 inet dhcp lines in the
/etc/network/interfaces file. The ethernet cable is plugged in on both
ends,
thats right. With one ethernet plug, you need to have 3 cards. 2 in the
computer that actually is connected to the plug. one card for the pplug
and one card for communications with thte other computer. ofcourse the
other computer must have another card. No special software is needed.
read networkin
Alec wrote:
How does one connect two computers to the internet throught one ethernet
socket? Does one of them have to have two ethernet cards and run special
software?
Technically, one socket would not do the job. But to your querstion:
One computer acts as a gateway. One interface is connec
Hi
How does one connect two computers to the internet throught one ethernet
socket? Does one of them have to have two ethernet cards and run special
software?
Thanks
Alec
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.y
First you need to find out if that card is supported. If it is then
find out which driver you need. Then you compile that driver into you
kernel or as a module. Someone may know which card your talking about
and tell you which driver you need, if it is supported. If not there
are a couple place
Hello,
I have and Ethernet card in my HP Kayak, and the M$ NT
recognises it as:
HP Ethernet with Lan Remote Power.
I'd like to install slink, can I use the card as generic
Ethernet?
Thanx
Gabaux
On Fri, 31 Mar 2000, syed huq wrote:
> I looked under /lib/modules/2.0.36/ and found pcnet32.o which is what
> the HOW-TO says as being the correct driver for AMD PCNET PCI.
>
> if I do a ifconfig as root, I still do not see the eth0.
> if I do a modprobe eth0, I don't get anything.
eth0 is a s
Hi,
(absolute Newbie to Linux):
Using Slink and trying to setup my eth0 for the first time. I am reading
the Ethernet-HOW-TO and have a few ques.
When I did dmesg | more, it did not show any eth'N' messages so my first
installation did not see the card.
I looked under /lib/modules/2.0.36/ and fo
You might want to check /usr/doc/sysvinit/examples/network (from the sysvinit
package).
>
> Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
> fine in Red Hat and appears to work okay in Debian _if_ I issue an
>
> ifconfig eth0
>
> command. Naturally, though, I'd like t
heya, paul
have a look in /etc/init.d/network
from
da bobstopper
-Original Message
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
command. N
> Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
> fine in Red Hat and appears to work okay in Debian _if_ I issue an
> ifconfig eth0
This is typically done in the script /etc/init.d/network That script is
generated at install when you answer the questions about your
when i want to change network settings to take effect everytime it boots i
edit /etc/init.d/network
hope you enjoy debian, ive played with a few rh boxes and they about drove
me mad.
nate
On Mon, 10 Jan 2000, Paul M. Foster wrote:
paulf >
paulf >Just transferred over from Red Hat 6.1 to Debian
You can put:
ifconfig eth0 netmask
into /etc/init.d/network .
You will probably also have to add your "route" line in there as well.
On Mon, 10 Jan 2000, Paul M. Foster wrote:
>
> Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
> fine in Red Hat and appears to wor
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
command. Naturally, though, I'd like this to happen on boot. I have the
appropriate lines in conf.modules, but I have a feeling there is some
At 10:55 AM 7/12/1998 +0800, you wrote:
>Could be. Routing is not that hard, but it depends a bit on what kernel
>you are using. 2.1.x is easier than earlier kernels.
I'm using 2.0.29 is that a problem?
For a very good debugging tool use tcpdump. You will see both incoming
>and outgoing packets
Everthing looks good. ARP packets are most likely what you're seeing on your
hub. Can
you check out your NT machine's configuration?
Tomt wrote:
> Heres my previous message
> ___
> Hi Everyone,
>
> I've managed to get tcp/ip network
Heres my previous message
___
Hi Everyone,
I've managed to get tcp/ip networking up and running on my Debian machine.
I have my 3com 3x509 configured to ip address 192.168.0.1, I have one other
machine on my local network(for now)
> Hi Everyone,
>
> I've managed to get tcp/ip networking up and running on my Debian machine.
> I have my 3com 3x509 configured to ip address 192.168.0.1, I have one other
> machine on my local network(for now) and it is ip 192.168.0.2.
>
> How can I get my debian machine to see(ping) the othe
Hi Everyone,
I've managed to get tcp/ip networking up and running on my Debian machine.
I have my 3com 3x509 configured to ip address 192.168.0.1, I have one other
machine on my local network(for now) and it is ip 192.168.0.2.
How can I get my debian machine to see(ping) the other machine?
M
"G. Kapetanios" <[EMAIL PROTECTED]> writes:
> beacause of high network load and nothing to do with hardware. However I
> now get it not only in tty8 where syslog messages appear but in my working
> console . As a matter of fact while I write this message through telenet
> to my mail sever I get th
Hi all,
For about 12 hours I get through syslog every couple of minutes messages
messages such as Oversized Ethernet frame spanned multiple buffers status
... . Now I have gotten this message before but only a couple of time and
then it stopped. I asked the list about it and was told that it is
b
26 matches
Mail list logo
