--- Alice Pinard <[EMAIL PROTECTED]> escribió: > hi, I'm trying to set up a firewall to connect to my cable modem ISP > (comcast) using DHCP > > I've got a 3c905 ethernet card and I've got the 3c59x module running. I've > got the auto eth0 and iface eth0 inet dhcp lines in the > /etc/network/interfaces file. The ethernet cable is plugged in on both > ends, the cable modem is plugged in and it has lights. > > I am getting a 'weirdness' and I'm not sure if it's on the DHCP end or the > ethernet end. >
If you are using an ethernet connection to the modem, then most likely you need to enable the DHCP server in the modem. Your modem probably has a web- based interface, where you can just bring up the page by typing in (for example) http://192.168.1.254 (the address for my Westell). You may have a different address that you can get from the modem's documentation or from tech support. Once you have that, you can bring up eth0 with a static address, browse to the modem, enable DHCP, and then bring eth0 back down and then up on DHCP. If you do it that way you let the modem handle the acquisition of the address from the ISP and then it just NATs you out. > Basically if I do an ifconfig the ethernet card is entirely missing the > line that would begin with inet addr. It's not blank, it's not there with > a 0.0.0.0 address, it's just not there. > > basically it looks like this > > eth0 Link encap:Ethernet HWaddr 00:60:97:97:E9:92 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1298 errors:0 dropped:0 overruns:0 carrier:1298 > collisions:0 txqueuelen:100 > RX bytes:0 (0.0 b) TX bytes:443916 (433.5 KiB) > Interrupt:10 Base address:0xff00 > I think that happens when the card is present and there is no way for it to get an address. I.e., if you bring it up static and then take it down, when you try again with DHCP and it can't find a DHCP server it will use the old static address (I believe). > > I realize that there's other information that may be necessary but I'm not > sure what else might be particularly relevant at this pint > > Is there anything off the top of anyone's head that would suggest what > area I should be directing my troubleshooting? > > thanks > > > ===== > -Alice > "Also _cute_ and _fluffy_!!!" (from Lilo and Stitch) > -Roberto ___________________________________________________ Yahoo! Messenger - Nueva versión GRATIS Super Webcam, voz, caritas animadas, y más... http://messenger.yahoo.es -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]