Hello to all,
I do have a hardware issue: I would like to use the ASUS
P4B533 including the 5.25 " IPanel Multimedia front module extension under
Debian. Does anybody have experience on how to setup and configure this
module?
I appreciate your comprehensive answer very
much!
Re
On Fri, 4 Apr 2003 [EMAIL PROTECTED] wrote:
> Once you've scoped out the lm-sensors situation, go here for hints on
> building that kernel with kernel-package:
>
> http://newbiedoc.sourceforge.net/system/kernel-pkg.html
>
> Kevin
I eventally got bored enough to test out what a make-kpkg would do,
On Fri, 4 Apr 2003, Troy Arnold wrote:
> > Two:
> >
> > Is this ASUS P4B533 supported by the i2c/lmsensors found in Sid?
>
> As the README says, lm-sensors doesn't support /motherboards/, it supports
> /chips/. To find out for sure you'd need to look in your
On Fri, 4 Apr 2003 14:21:15 -0500 (EST)
Mike Dresser <[EMAIL PROTECTED]> wrote:
> I looked for various howto's, but they all assume you're running prebuilt
> kernels, unfortunately.
Once you've scoped out the lm-sensors situation, go here for hints on
building that kernel with kernel-package:
ht
;s not the proper way.
This works fine if you build your kernel with make-kpkg, which
Everybody Should Do (TM). Otherwise, try 'debian/rules
modules-nokpkg' as root from your unpacked lm-sensors-source tree.
> Is this ASUS P4B533 supported by the i2c/lmsensors found in Sid?
Well, it&#
bed
the i2c and lm-sensors source (from http://secure.netroedge.com/~lm78/)
and built that against my kernel.
> Two:
>
> Is this ASUS P4B533 supported by the i2c/lmsensors found in Sid?
As the README says, lm-sensors doesn't support /motherboards/, it supports
/chips/. To find out for sure you'
Two questions:
One:
How are you supposed to install the lm-sensors-source when you compile
your own kernels. the resulting file from make-kpkg modules_install
depends on kernel-image-2.4.20. I just --force-depends'd it in, I assume
that's not the proper way.
Two:
Is this A
SORRY!!! RTFM SOLVED THE PROBLEM
got it - everything fine and working!
On Thu, 2002-12-26 at 16:09, Michael Borko wrote:
> hi everyone!
>
> can anyone help me with the subject-mentioned system at the
> installation?
> i can see the controller at /proc/pci but have no chance to access the
> RAID1
hi everyone!
can anyone help me with the subject-mentioned system at the
installation?
i can see the controller at /proc/pci but have no chance to access the
RAID1-array!!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, 26 Nov 2002, Mike Dresser wrote:
> On Tue, 26 Nov 2002, Walter Tautz wrote:
>
> > A full listing of lspci -v I did look up the pciid and it
> > is apparently a Seiko Epson Corporation devicewhich according
> > some listings elsewhere on the net is apparently an eepro100, however
On Tue, 26 Nov 2002, Walter Tautz wrote:
> A full listing of lspci -v I did look up the pciid and it
> is apparently a Seiko Epson Corporation devicewhich according
> some listings elsewhere on the net is apparently an eepro100, however
> trying to load this does not work... NOTE eppro100-
A full listing of lspci -v I did look up the pciid and it
is apparently a Seiko Epson Corporation devicewhich according
some listings elsewhere on the net is apparently an eepro100, however
trying to load this does not work... NOTE eppro100-diag has no idea
what the card is
Walter
On Fri, 15 Nov 2002 18:20:36 +1100, Rob Weir <[EMAIL PROTECTED]>
wrote:
>On Thu, Nov 14, 2002 at 02:07:33PM -0800, Bill Moseley wrote:
>> I should look into the IDE card. I have two IDE drives (not RAID) and IDE
>> CD-R and CD/DVD. I'm never sure if both hard drives should go on one IDE
>> as ma
On Thu, Nov 14, 2002 at 02:07:33PM -0800, Bill Moseley wrote:
> I should look into the IDE card. I have two IDE drives (not RAID) and IDE
> CD-R and CD/DVD. I'm never sure if both hard drives should go on one IDE
> as master/slave, or if the drives should both be masters with the CDs on
> the sla
At 07:30 AM 11/15/02 +1100, Graham Williams wrote:
>Thanks for the information. I grabbed source for kernel 2.4.19,
>patched it to 2.4.20-pre11, compiled it and installed the resulting
>Debian package and everything is working wonderfully, except XFree
>4.2.1 which doesn't support the video card (
Received Wed 13 Nov 2002 3:53am +1100 from Mike Dresser:
> On Sun, 10 Nov 2002, Graham Williams wrote:
> >
> > I'm at this moment in the throws of installing Debain 3.0 on an ASUS
> > P4B533-VM based machine.
> > ...
> I've got ... 4 of these boards i
On Sun, 10 Nov 2002, Graham Williams wrote:
> Hi Bill,
>
> I'm at this moment in the throws of installing Debain 3.0 on an ASUS
> P4B533 based machine. So I would love to hear of any insights you
> get.
>
> My current state of play is that Debian GNU/Linux 3.0 installe
On Mon, Nov 11, 2002 at 09:54:58AM +1100, Graham Williams wrote:
> Received Sun 10 Nov 2002 10:53am +1100 from Graham Williams:
> > Received Sun 10 Nov 2002 8:08am +1100 from Bill Moseley:
> >
> > > At 07:22 AM 11/10/02 +1100, Graham Williams wrote:
> > > > ..
Received Sun 10 Nov 2002 10:53am +1100 from Graham Williams:
> Received Sun 10 Nov 2002 8:08am +1100 from Bill Moseley:
>
> > At 07:22 AM 11/10/02 +1100, Graham Williams wrote:
> > > ... Debain 3.0 on an ASUS P4B533 based machine. ...
>
> > > ... Debian GNU/Linu
Received Sun 10 Nov 2002 8:08am +1100 from Bill Moseley:
> At 07:22 AM 11/10/02 +1100, Graham Williams wrote:
> > ... Debain 3.0 on an ASUS P4B533 based machine. ...
> > ... Debian GNU/Linux 3.0 installed just fine (booted with bf24 to
> > use the 2.4.18 kernel) but the on
At 07:22 AM 11/10/02 +1100, Graham Williams wrote:
>I'm at this moment in the throws of installing Debain 3.0 on an ASUS
>P4B533 based machine. So I would love to hear of any insights you
>get.
>
>My current state of play is that Debian GNU/Linux 3.0 installed just
>fine (
Received Sun 10 Nov 2002 3:53am +1100 from Bill Moseley:
> Does anyone have experience installing Debian on a ASUS P4B533 based system
> that can offer any comments? I'm not finding much on-line discussion of
> this motherboard.
Hi Bill,
I'm at this moment in the throws o
Does anyone have experience installing Debian on a ASUS P4B533 based system
that can offer any comments? I'm not finding much on-line discussion of
this motherboard.
Thanks,
--
Bill Moseley
mailto:moseley@;hank.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "u
23 matches
Mail list logo
