Do you know where I Can get Adaptec AIC-7890 SCSI
controller
Many Thanks
Paul
> 3com cyclone has been reported to work with kernel 2.0.35. But I
> am stuck until AIC7890 will be supported in 2.0.x ?
>
> Does this mean I am locked ? Anyone has a tip or suggestion ?
Both support for aic7890 and ethernet are drivers; you can download the updates
for aic7890/3com 3c590b you
>
> Hi,
> I run an ASUS P2B-LS motherboard with AIC 7890 SCSI , so I had
> to install a special kernel image (2.0.34) from ~doko/aic7xxx.
>
> But I have also a 3com cyclone card (3C905B) which doesn't work.
> I recompiled 3c59x.c with kernel-sources-
Hi,
I run an ASUS P2B-LS motherboard with AIC 7890 SCSI , so I had
to install a special kernel image (2.0.34) from ~doko/aic7xxx.
But I have also a 3com cyclone card (3C905B) which doesn't work.
I recompiled 3c59x.c with kernel-sources-2.0.34, but it still gives
"ff:ff:ff:ff:ff:f
>> "OD" == Oz Dror <[EMAIL PROTECTED]> writes:
OD> I am going to by a MB with on scsi u2w controller aic7890
OD> can I boot/install a new debian system using on this board
The currently available disks don't have support for it.
However, Steve Hsieh <[EMAIL PROTECTED]> made disks for his own
u
Hi,
I am going to by a MB with on scsi u2w controller aic7890
can I boot/install a new debian system using on this board
thanks
Oz Dror
--
<
NAME Oz Dror, Los Angeles, California
EMAIL [EMAIL PROTECTED]
S
| > Motherboard, and a Adaptec AIC-7890 Ultra2 SCSI chipset.
|
| Matthias Klose wrote:
| > have a look at http://swt.cs.tu-berlin.de/~doko/aic7xxx/ for Debian boot
| > disks that support the 7890.
|
| I took them, and my P2B-DS works pretty well (one day I will buy the
| second CPU and
I was skimming through the messegas from the last few days and I haven't
noticed any answers so I'm answering (even though it is rather late).
> I've been trying to install Debian on a P-II, with a ASUS P2B-LS
> Motherboard, and a Adaptec AIC-7890 Ultra2 SCSI chi
Hi All,
I've been trying to install Debian on a P-II, with a ASUS P2B-LS
Motherboard, and a Adaptec AIC-7890 Ultra2 SCSI chipset.
My problem is that Debian's installation program doesnt seem to detect
my SCSI
harddrive!
Has anyone else used a similar setup?
Could someone PLEA
Max <[EMAIL PROTECTED]> writes:
| Has anyone been able to get the latest development kernel (2.1.121)
| working with an Adaptec AIC-7890 SCSI controller? I compiled the
| kernel with AIC-7xxx support built in, but it refuses to recognize the
| SCSI interface at boot time. I'm curren
Has anyone been able to get the latest development kernel (2.1.121)
working with an Adaptec AIC-7890 SCSI controller? I compiled the
kernel with AIC-7xxx support built in, but it refuses to recognize the
SCSI interface at boot time. I'm currently running 2.0.34 with the
AIC-7xxx patches,
>> Does anyone know how to get Debian(the hamm version) to recognize the
>> Adaptec AIC-7890 SCSI controller? I need to install Debian to a SCSI drive
>> connected to the 7890(built in to my motherboard), but when Debian boots
>> up, it
>> says 'no scsi contr
.
:)
Babs
At 07:37 PM 7/1/98 -0400, you wrote:
>The SCSI Controler I refered to in my post is the built-in
>AIC-7890 Ultra2 Wide SCSI controler on the ASUS P2B-DS
>motherboard(and the P2B-S/P2B-LS). When I boot up on the
>rescue disk I get the error: Unable to initialize WD-7000
>SCSI
The SCSI Controler I refered to in my post is the built-in
AIC-7890 Ultra2 Wide SCSI controler on the ASUS P2B-DS
motherboard(and the P2B-S/P2B-LS). When I boot up on the
rescue disk I get the error: Unable to initialize WD-7000
SCSI controler. and then about 10 lines later:
scsi: no controlers
Does anyone know how to get Debian(the hamm version) to recognize the
Adaptec AIC-7890 SCSI controller? I need to install Debian to a SCSI drive
connected to the 7890(built in to my motherboard), but when Debian boots
up, it
says 'no scsi controlers found.' Obviously, this is
15 matches
Mail list logo
