Make sure there is no IRQ conflict. Make sure the last device on the chain is terminated. In order to get scsi controllers AICxxx version to work all you have to do is recompile the kerenel with the AICxxx (low-level) driver built in. You should be able to reboot and have it come up after that. :) Babs
At 07:37 PM 7/1/98 -0400, you wrote: >The SCSI Controler I refered to in my post is the built-in >AIC-7890 Ultra2 Wide SCSI controler on the ASUS P2B-DS >motherboard(and the P2B-S/P2B-LS). When I boot up on the >rescue disk I get the error: Unable to initialize WD-7000 >SCSI controler. and then about 10 lines later: >scsi: no controlers found >If anyone can help with this I would be _most_ grateful. > >--Evan >----------- >Evan Van Dyke E-mail: [EMAIL PROTECTED] >DNRC's Minister of Lost Internet Packets. O- >Amateur Radio Call Sign: KB8PVE > "Quoth the Raven... 'Nevermore!'" --Edgar Allen Poe > "I'll bet that all you can do is watch the ball bounce around the > screen" > --Dilbert to Management > > >-- >Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > Thanks, Babs, Your Got.Net PC Tech... http://we.got.net -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
