How would you configure an Internal Modem ?
Thanks,
Shyam
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I use a AMD-Duron processor on a VIA chipset motherboard ,
I installed the S3Virge stuff that came with
the CD supplied by my vendor ,and now am having some problems
with the display.
o In XWindows , my ps/2 mouse pointer hangs after lurking in the corners
ofthe screen.
o zgv , text-console - b
Since today morning my Debian Potato r3 box has
been behaving strangely :
[EMAIL PROTECTED]:~
[EMAIL PROTECTED]:~
[EMAIL PROTECTED]:~/mnt7/Penguin_logo$ sudo /sbin/ask
Password:hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
[EMAIL PROTECTED]:~
I
bin/telnet
and a whereis in.telnetd
whereis: something/inetd , if I remember rightly.
I am actually confused on how to read the situation.
Thanks and Regards,
Shyam.
As on Sat, May 04, 2002 at 10:57:53AM -0700 , Sean 'Shaleh' Perry said :
>
> On 04-May-2002 shyamk wrote:
&g
I am trying to establish networking on a LAN consisting of
2 machines on Linux 2 on Windoze.
My second Linux box never used to respond to the network.
So I did :
ifconfig -a
ifconfig eth0 192.147.165.4 netmask 255.255.255.0
ifconfig -a
Now from the one Windows box (192.147. 165.1) ,
connected t
I am new to Weblogic server (the practical side perhaps),
so I do not know how to shutdown the Weblogic server from the
text-console / command prompt.
Please help.
Regards,
Shyam
--
([EMAIL PROTECTED])--(=)--(Shyam)---
"Beauty lies in the eyes of the beholder."
"The trut
How do you start an FTP server program ?
This might be a silly question , but it is
something for which I have no answer.
In our server , we faced a two-fold problem :
o One that we could not log-in as any user.This I solved
by entering single-user mode (on rebooting after we knew
somethi
I have found a sound driver that mentions that
it has verions for Red Hat 6.0 to 7.0 (no mention
of debian) , a version labeled 2.2.16 etc.No
version for debian and Slack.
1 )
My kernel version is 2.2.19
the sound card directory (as I mentioned above ,
I un-tarred from the directory named 2.
am having problems with using my Logitech 3 - button PS/2
mouse on GUI .I do get it in the text-mode console , but when I startx
and Ctrl - Coff the following is what I get :-
(--) SVGA: Maximum allowed dot-clock: 230.000 MHz
(**) SVGA: Mode "640x480": mode clock = 25.180
(--) SVGA: The
I am using a VIA/AMD-Duron system .
The CD they gave does not contain any display drivers , etc ,
for Linux !
Could somebody please guide me on where I could get reliable drivers
from ?
Warm Regards,
Shyam
--
([EMAIL PROTECTED])--(=)--(Shyam)---
"Beauty lies in the eyes
A strange client arrived with a stranger set of requests
(at a time when I am cash-starved) . He dropped the following
ideas over phone (perhaps his requirements -or- modus - operandi.
He said he wanted VB -on- Solaris !
SNMP , Distributed Battery Charging, RS485 something,
status recording , and
I am having problem in
configuring X on Potato r3 for an on-board Mercury(810) Display.
I get only 8bpp while Win98 is crystal clear.I am sulking because
I want to shift completely to Debian , even the pictures.
As you can guess , the list of drivers does not show anything
proximate to Mercury or i
I am in a precarious situation :
One fine morning , my boss pulled out a cable to
connect the 2 switches (1 switch for one LAN).
This may be what it looks like :
(machines (machines
10.10.1.*) 192.255.255.*)
[switch1] [switch2
e. Its seems appropriate to read that
> /dev/hda9 is drive D: and overlaps assuming drive E and F hence is why they
> don't show up.
>
> Any virus checker can miss viruses. There is no "sure" cure except toasting
> Windows.
>
> - Original Message -
>
I use a dual-boot Win98 - RH Linux machine , on a LAN
of Windoze machines.
When my machine was booted to Win98 , my friend , whom
I can trust , copied a folder into my machine (his machine
runs the latest version of Norton Anti-Virus 2000 .. I mean
that he downloads the latest updates).
We subseque
shyamk @ eth . net ([EMAIL PROTECTED]):
linux-india-help said :
> I am having a very strange situation :
> The 3 CDs that I have for Debian Potato r3
> are not properly labelled.
> When I use say , dselect , and go for installing say , bcc
> and choose install , they a
Most of the Linuxes , including Debian , use the Ctrl-Alt-Del
for shutdown -or- reboot (depending on the inittab) ,
and also provide :
kb::kbrequest:/etc/init.d/gpm restart #This /etc/init.d/gpm
restart thing is my modification
stuff , which uses the Alt- combination
to execute the choice
I tried sending a zip file as attachment from mutt , but it does
not go . The recipient does see the mail , but not the attachment !
The version of zip I use : Zip 2.3
This is what file FL.zip shows :
Zip archive data
What can the reason for this anomaly be?
Thanks,
Shyam
--
([EMAIL
I want to make my own shell scripts (mail related) ,
and map some keys in mutt to call these from my mutt.
Please suggest as to how I can go about this.
Warm Regards.
--
([EMAIL PROTECTED])--(=)--(Shyam)---
"Beauty lies in the eyes of the beholder."
If you believe me then
What I am thinking is maybe I can get the /etc/init.d/gpm restart
repeated somehow . I am still confused .
I shall be grateful , if anybody could guide me as to the cause
of this gpm problem.
Warm Regards.
--
([EMAIL PROTECTED])--(=)--(Shyam)---
"Beauty lies in
What I am thinking is maybe I can get the /etc/init.d/gpm restart
repeated somehow . I am still confused .
I shall be grateful , if anybody could guide me as to the cause
of this gpm problem.
Warm Regards.
--
([EMAIL PROTECTED])--(=)--(Shyam)---
"Beauty lies in
I made the following entry in my .fetcmailrc :
poll pop3.eth.net proto POP3 user username password mypass
This leads to an error :
fetchmail :Command not supported . Valid list of commands : UIDL ,
...
fetchmail : fetching 94 mails for username
fetchmail : SMTP error 10 .
And thus I am not a
Title: modprobe : modprobe : Can't locate module char-major-10-135
Dear
members ,
After editing /etc/defaults/rcS to
disable UTC , and , after
Installing
postgresql and mysql on my Debian Potato r3 box , and all that these
installations entail (I mean dependencies) ,
Upon
restart I g
How do you turn on apm ? Mine seems to switched
off.
Warm Regards,
([EMAIL PROTECTED])
Shyam
#
WISH YOU ALL A HAPPY X' Mas
#
I will just explain what I have/had doneto get debian
on my box ...
I installed the Debian potato r3 CDs ,
and when they asked me about what I wanted
to install ... I just pressed <>
They installed whatever they would have done by default .
Later I installed some apps for GUI (no GUI yet).
How do you change system date for debian .
Debian shows me 7:06 PM , when it actually
is 2:25 PM . I think they start off from GMT ,
but , why this absurdity ?
Win98 shows it right (well at least he is more
bothered with what the BIOS says).
Could someone please help me set the Local time
right o
I have two things that I did on Red Hat that I failed to
on Debian :
1) I configured my sound card suuccessfully and even
heard Elton John as well as Titanic on Red Hat Linux 7.1.
But my Debian Potato r3 (that consists only of the free
stuff - excludes the non-free stuff) , says - "Boss ! No!"
t
Dear members,
I had written to the list weeks back on socket programming on Linux , and I
had
sent across ,
my TCPEchoserv.c and the TCPEchoclient.c
Naren said that it worked for him , that makes me
all the more desperate.
I removed firewalls from my box , just in case
that prevents sockets
ate: Thu, 6 Dec 2001 17:32:23 +0530
--fB6C1Rk01373.1007640144/localhost.localdomain
Content-Type: message/rfc822
Return-Path:
Received: (from [EMAIL PROTECTED])
by localhost.localdomain (8.11.2/8.11.2) id fB63Mib00940;
Thu, 6 Dec 2001 08:52:44 +0530
Date: Thu, 6 Dec 2001 08:52:44 +0530
From:
There are certain movie players in certain Linuxes ,
that are horrendously pathetic .
It is something like this :
You see two hands , you hear some sound , and after
5 minutes you see Silvester Stalllone ?
What's going on ?
Regards,
([EMAIL PROTECTED])
Shyam
Dear Linux-users,
I have a suggestion , which I guess all of us should be taking seriously
Why don't we have a 'centralised' Nameserver , that
will do the IP-to-name-resolution for the browsers
of all the Linux users .
Our /etc/resolv.conf files can then mention the IP Address
of
Good Morning everybody ,
I wish to return to my TCP Client/Server question.
(server on 10.10.1.4 port 9888) (and client on 10.10.1.15) .
The following is my Server & then (at the botttom) my client :-
x
//Server
#include
#include
#include
#inclu
I am running a dual-boot Win98-RedHat7.1 machine .
AND , I wish (ardently) to also have Debian on my box .
Since I am already using vmlinuz-2.4.2-2 ,
I want the prospective Debian OS , to take it from the
/boot , that I had created for Red Hat Linux 7.1 .
- I feel that since booting (as for
What should I do to make my machine able to receive dial-ups ? What do I need
at
a) The hardware level
b) The OS level
c) The software level
?
Please guide me on this.
Warm Regards,
([EMAIL PROTECTED])
Shyam
I wish to run /etc/rc.d/init.d/smb start , at a run-level ,
say run-level 5 (so far , it has not been assossiated with any run-level) .,
and /etc/rc.d/init.d/smb stop , while shutting down .
I understand that I might need Start and Kill scripts ,
for this at the runlevel , I am looking at.
My
Hi everybody !
I had posted a few doubts to this list the last week
about network programming in C on Linux .(rpc, tcp ,udp ,Unix Sockets) .
My tcp programs , the server , running from 10.10.1.4 (listening at 9888)
and the client running from 10.10.1.15 ,
do not show the data the other
[EMAIL PROTECTED] shyam]$ xhost +
[EMAIL PROTECTED] shyam]$ su postgres
bash $createdb shyamdb
psql.connectDBStart() ... connect() failed : Cannot respond
Is the postmaster running at 'localhost' & accepting connection on Unix
socket
'1234' ?
createdb : database creation failed.
Yesterday , I was speaking about a nteworking program (client-server) , , client
running on 10.10.1.15
and server (prog.) running on 10.10.1.4
I am very grateful for the generous help of suggestions ,
I received from all.
Well this is the current situation :-
1) I started the server program at
I am having Server Programs (for TCP,UDP,Unix Sockets) , that listen on a port
number say , 9888 at
10.10.1.4
and they are being contacted by a Client (for TCP,UDP,Unix Sockets) Linux
machine
from 10.10.1.1 .
Both macines are on the LAN , nothing more nothing less . We have not yet gone
for
a
Dear members ,
Is there any safe way , whereby , I can hide init 1 from all others who
access
my mac ?
I was thinking in this direction :(I have not given this serious thought) : -
Commenting out the runlevel 1 from the /etc/inittab .
I know I am saying something that is slightly ridic
Dear members ,
I am having some serious doubts (generated by a vague book
and my ignorance/stupidity combined together).
1) First , I wish to talk about the memsetfunction
used in the TCPEchoServer.c program .
This function takes 3 arguments as far as the documentation is conc
Could somebody please send me the URL of an FTP site from where I can download
binaries (/bin variety and /sbin variety) for Linux running AMD K6 ?
My machine shows up as i586 .
Regards,
([EMAIL PROTECTED])
Shyam
Dear members ,
I have 2 doubts :
1) How do you take lilo out of MBR in a fully functional Win-Lin dual-boot
machine ?
2) How do you write (manually) either the Win 98 boot loader or the Win 2K/Win
NT
boot loader
to MBR ?
Thanks ,
([EMAIL PROTECTED])
Shyam
Title: Dear members ,
Dear members ,
Re :: Oracle8
How do you delete a datafile in Oracle (as
DBA- superuser ) and not as OS- Administrator ?
I read that this is possible .
Please guide me on this .
Warm Regards,
([EMAIL PROTECTED])
Shyam
Dear members ,
I am trying to brush up my SQL (Oracle) , and before I dust my books ,
I
decided to take an assignment :-
Q) Get all the suppliers and the total number of parts they are supplying.
table s :-
s# not null varchar2(3)
s_name varchar2(7)
statusnumber
city
Dear members ,
I have heard about something called TDS (not Tax Deducted / Stolen at
Source) .I presume that it is a database (an RDBMS) . Please correct me if I am
wrong
.
2. How do you get a JSP , or Java application/applet/ orangelet/servlet , etc ,
communicate with a database , all r
Dear members,
On Linux systems you can do a dmesg to
get what the system is chattering at the boot up.
What corresponding thing can I get done on
Windows (98 or 2K/NT).
Warm Regards,
([EMAIL PROTECTED])
Shyam
Dear Osamu,
I was offended by several of your usages like :
"Judging from your question... Not for you." , etc.
I have done OS - installations before (including dual-boots) .
I also know that there is a very high probability for data loss .
My intention was not school boyish C programming ,
and I
I forgot to add the following information from fips run on windows :-
(Maybe , I now have to try to partition D: instead of E:)
Partition table:
|| Start | | End | Start |Number of|
Part.|bootable|Head Cyl. Sector|System|Head Cyl. Sector| Sector |Sectors |
Could somebody please advice me on a safe approach whereby , I can have Debian
on a
Windows partition , sans data loss . ie : I want both the OSes , for different
reasons .
Can somebody who has done a similar thing , please outline what steps are to be
taken
to this end , such that it is 100% ce
Thanks Mike , but where can I get those sources from.
Regards,
([EMAIL PROTECTED])
Shyam
- Original Message -
From: "Michel Loos" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, October 24, 2001 10:19 AM
Subject: Re: Somebody asked this ...
On Wed, 2001-10-24 at 00:57,
How do I make C - binaries on Linux that can be transported to Windows ?
Supposing that , I compile my Linux - based C programs using gcc ,
obviously ,
in addition to this , the library used by Linux C programs is the glibc.
Any suggestions , whereby , I can move over whole applications made
Could somebody pls tell me how Modem configuration + Dial up is done on any
Linux
box , if I am having an ISP ?
Thanks,
([EMAIL PROTECTED])
Shyam
I was asked if , ' gcc ' , the GNU C Compiler has a source code that is
available .
Good question , but , I do not know , and such , I am ashamed of myself. Please
help
alleviate my misery .
Thanks,
([EMAIL PROTECTED])
Shyam
Title: Hello everybody ,
Hello everybody
,
I wanted to share with all
of you my desperation to get a hang of Solaris .
All of you ,
being votaries of the Open Source Movement , could perhaps guide me as to how I can
have Solaris on my box [I am speaking of both office and home ,
I was told that the following were the steps for making a kernel :
cd /usr/src/linux
make config
make dep
make clean
make bzImage
make modules
I have 4 doubts :
1. If I have made a kernel module , say prn.o , does this automatically get
entry
into a kernel through this procedure ?
2. Could some
I read a specification for a Networking practice (Linux) ,
mentioning as requirements :
1. boot floppy
2. Installation CDs for Linux 6.0
3. Supplementary disks .
What does 'supplementary disk' really mean ?
What can its contents be ?
How do you make it ?
Is theis the old Unix - root floppy thing
I compiled the same set of instructions :
1. Using C
2. Using Assembly
into Binary .
I issued the file command to show the type of the resulting files (assembler
-
binary and C - Binary )
Both showed different results :
1. sangharsh.cexe : ELF 32-bit LSB Executable , Intel 80386 , version 1
My floppy shows (on Linux) as having a bad FAT partition , and therefore , Linux
will not read from the floppy .
What commands and what flags do I use on Linux to format the floppy (into
whichever
fs type I wish , say, FAT or ext2 ) ?
Thanks,
([EMAIL PROTECTED])
Shyam
I have a new kind of doubt ..
Could those in the know of things , please outline how you would compile a
kernel
(the steps) on a RedHat 7.0 system ?
Mr.Bish had done so for a Debian system as a footer on one of his mails .
I am having a current requirement .. to disable module version support
(&
Please clear these two doubts of mine :
1. When does a deadlock happen on a Unix/Linux system ?
2. What is a deadlock ?
Thanks,
([EMAIL PROTECTED])
Shyam
I suppose TSR = Terminate (but) Stay Resident
I have a few doubts on this front :
1. Does this mean , that once I switch my machine that is running a TSR , the
TSR is
gone ?
I guess that for all programs , a shutdown or poweroff , stops the process.
2. One of my friends said that if a TSR hits
OK , but is there any way that I can have/make more than one super-users ? To
this
end , can I play off a uid and make a person a super-user (my experiment
already did
not work - the guy I rewarded with a uid of 40 , was absolutely a normal user in
every sense of the term , with not a modicum of
I tried to install gcc -2.96-54 with rpm 4.0 (no problems from rpm) . But the
following things are demanded ...
Could somebody please tell me what this means and what I should do ?
Thanks,
([EMAIL PROTECTED])
Shyam
[EMAIL PROTECTED] root]rpm -ivh gcc -2.96-54
dbiSetConfig : unrecognised "db" opt
Speaking about a Win 95/98 or msdos Boot floppy,
How can you be sure that there is this 'CD-Rom' support ?
What is the file/EXE/dll that brings about CD-Rom support ?
Please help.
Thanks,
([EMAIL PROTECTED])
Shyam
I understand that there are certain .deb-s that :
1) make your Linux box a router (I want him\her to at least identify on being
ping-ed
by others on the network , and accept telnet and ftp connections) .
2) that get on with the basic bit of networking., DHCP,DNS ,Samba,etc.
What are the .deb-s
I am having a version of Slackware called Dragon Linux.
As per the manuals , you can have it on a Windows partition .
I installed it in E:\Dragon Linux\ from the Cd
Then I went to MSDOS mode and run the setup file as mentioned by them.
I got into Dragon Linux (the Login prompt , etc.)
I was aske
What is tgz and how do you decompress it ?
I undertand for gzip it is gunzip , for tar it i tar xvf
Please help
([EMAIL PROTECTED])
Shyam
What is POSIX and what does it entail ?
Thanks (Sorry for the stupid question)
SK
Dear members,
Here is something I have not been really been able to understand ..
SEGMENTATION
FAULT .
Please tell m:
1)What exactly is segmentation fault ?
2)When does it occur ?
3)How Do you Solve it ?
Please help
Regarding your question as to where my parport is ,
It is pretty normal , not an additional fitting as far as I know.
Regards,
([EMAIL PROTECTED])
Shyam
- Original Message -
From: "Wayne Topa" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, September 04, 2001 4:56 AM
Subject: Re: Re : append still
As you suggested I gave the append entry :
Image = /boot/kernel-2.4.9
label = Woody-249
Root= /dev/hda10
VGA = 0x31A
append = "hdd=cdrom lp=parport0 parport=0x378,none video=vesa"
(my lilo as installed looks slightly different but that hasn't created an
A]] I tried startx -l:8 for getting
XWindows onto tty8 and then Ctrl+Alt+F8 to get there
Result : (1)If the machine has not put up XWindows by default , then it
comes on tty7 , which is the default.
(2) if XWindows comes up as default , then this shows an error
,
saying
Why is the native filesystem of Linux called "Extende filesystem " ?
Thanks,
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitute it
."
By what name is the native filesystem of SCO Unix known as ?
Thanks
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitute it
."
If I wish to run a binary (say, AIRC) as a daemon , what should I do ?
My thoughts are something like:
maybe add into /etc/rc.d , a file with an entry like
if [-x /path/AIRC]
./path/AIRC #Execute this
Please offer your views on this . I know I have not thought enoug
I am installing Epson LX-300 and printtool shows all Printer categories except
this
one.
What do I do ?
Thanks,
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitu
I tried putting the append= directive in the region of the Linux series of
instructions .(mine is a dual-boot and therefore , obviously there is
"other=Win98"
series)
When this did not work , I put the directive on top ie in the general
directives.
They still make the same complaint .
"
St
You told me to
append = "lp=parport0 parport=0x378,none"
to the lilo.conf
What does parport=0x378,nonemean ?
Thanks
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions
I am having an error with my parport driver :
Starting lpd :parport0 : detected irq 7 ; use procfs to enable
interrupt
driven operation .
This is what dmesg has to say :
.
.
parport0 : PC - style at 0x378(0x778) [SSp,ECP,ECPP52]
parport0 : detected irq7;use procfs to enable interrup
Good day/evening friends ,
2 doubts :
1)Re: chmod :- What if you have , say 13 users and wish to single out ONLY 1 of
them
, away from your file/directory ?
2) Re: reiserfs :-
What is reiserfs ?
Thanks,
([EMAIL PROTECTED])
Shyam Kumar
Now I have started believing in God ! What exactly is reiserfs , how do I use it
(&should I ?) ?
Thanks,
([EMAIL PROTECTED])
Shyam
- Original Message -
From: "Anthony Campbell" <[EMAIL PROTECTED]>
To:
Sent: Sunday, August 26, 2001 1:53 PM
Subject: Re: cfdisk
On 25 Aug 2001, Cameron Mat
I am having a problem with cfdisk . I want it to rearrange the free space into
partitions of the type I desire .
I get default as "Linux" which does not happen to be the same as "Linux ext2"
."Linux
ext2" does not get accepted and it defaults to "Linux" . It means that a
comand like
:
mount
BTW what is /dev/null all about ?
Thanks
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitute it
."
- Original Message -
From: "Dave Sherohman" <[EMAIL
Suppose I am having an HTML form that calls a CGI script wriiten in Perl
(hosted by a
Linux Server) :
1. Does the fresh program I have written and labelled as , say, action.pl
...
Does it automatically get compiled and run by the HTML page/ form that calls it
?
2. Or do I have to make it
How using cfdisk , do you modify the size of a Win 98 FAT 32 partition ?
I know how to make one , remove it and have it written to the partition table .
Please help me to resize
Thanks,
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it a
How do you use 'dosemu' and what is it ?
Thsnks
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitute it
."
Is it possible to the same kind of graphics in GNU C as in Turbo C ?
If yes please advice me.
Thanks ,
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . It exists by itself and Quantity might hand
it an
untimely demise if blown out of the very fragile proportions that constitute it
.
Godd Morning Everybody !
I wish to ask 2 questions :
1. Supposing you are having a binary cose , say scoadmin , on a SCOUnix
machine ,
, , How do I transport this binary to Linux , so that it works over there ? I
tried
once but , it didnt materialise. Perhaps something with header files or mac
Good Morning/Evening to all,
I guess that it is standard in Unixes that :
0 : STDIN : keyborad
1 : STDOUT : monitor
2 : STDERR : error output device
If this much can be accepted , and this is true for Linux verssions , too ,
then how come I am given an error by my Linux machine for examp
Good (Sun)day to all ,
Where (in which directory) do Linux users get their mail (So that if you place
size
restrictions
upon him in this directory , he will have to clear all his mails regularly) :
Is it
/var/spool/mail/ ?
Thanks
([EMAIL PROTECTED])
Shyam
"Quality can Never be Quantified . I
Dear Members ,
I tried :
[EMAIL PROTECTED] root]setquota -u User1 /hell_filesystem 100 200 200 300
[EMAIL PROTECTED] root]
#Syntax :
#setquota [-u|-g] [-n]
[EMAIL PROTECTED] root]vi /etc/fstab
#now I change things to :
LABEL=/hell_filesystem /hell_filesystem
What is segmentation error and how do you solve it ?
Thanks
([EMAIL PROTECTED])
Shyam
Can somebody please tell me all about RAID .
If I set up RAID autodetect on say /dev/hda4 ,
does it destroy data any where ?
Please bring me in perspective ...
Thanks
([EMAIL PROTECTED])
Shyam
The details are :
Total disk size 8.3 GB
Primary DOS part. : 1.96 GB
Used : 1.66 GB
Free : 302 MB
This happened after I defragmented the C: (primary DOS part.)
Still Mr. fips is not happy . He says that the last cylinder is still not free .
Is the
Is there any way to install Debian potato r3 , on a Win 98 machine , onto
an
existing partition ?
Will the installation process necessarily remove data from a disk ?
fips (the partitioner) was telling me that I needed to keep at leaset the last
cylinder (on my primary DOS partition) free .
96 matches
Mail list logo
