There are many signs of a new kernel version in the latest updates:
linux-libc-dev, linux-source, linux-kbuild all show an upgrade
available from 5.10.162-1 to 5.10.178-2.
Conspicuously absent are any of the linux-image packages; the most
recent ones are 5.10.162-1. I figured they might just be d
On Sat, Nov 26, 2022 at 11:55 AM Ross Boylan
wrote:
>
> I am trying to compile a program that calls libkpmcore; it is not
> graphical. My main interest is in tracing through what scandevices()
> does.
> Since KDE uses CMake, I figured I should too. But I'm having trouble
&
p-module into a mode where it will consider Config files.
But even if that worked, I'd need to update the relevant paths.
I think I have the relevant development files installed.
Running on bullseye.
Can anyone point me in the right direction?
Thanks.
Ross Boylan
My cu
The bind9 script I created in /etc/resolvconf/update.d executed
systemctl reload named
near the end (if systemd is active, which it is for me). Adding set
-x to the script showed that this was where the process of bringing up
the interfaces hung up.
named is obviously not active when the ne
Thanks Andrew, Felix, Jeremy, Anssi, Curt, Tomas and Greg for your
suggestions and comments.
I followed several of them by trimming my network/interfaces file to
nothing and then slowly adding stuff back.
The blank file and the one with only the loopback worked:
networking.services reported succe
In Debian 11/bullseye my system keeps reporting timeouts while trying
to bring up the first non-loopback interface. According to ip, the
interface actually is up, but ifup/down do not know that. My 2nd
interface is down, and there is no mention of attempting to bring it
up in the logs. I can bri
Johannes Schauer Marin Rodrigues
wrote:
>
> Quoting Ross Boylan (2022-06-11 09:07:14)
> > The apt-secure man page in Debian 11 notes that repository signing is
> > a key part of the Debian security infrastructure. But key parts of it
> > are not documented. In my
Which is not me, because it's not
documented.
Ross Boylan
I got sick of FF forgetting where windows were between sessions and
investigated. (Well, really I got sick of having to locate the
windows and move them back to the right place on restart).
I believe the source of at least some problems is that the FF code
treats Virtual Desktop (WorkSpace in its
Correction: I wrote
6. And apparently the flag interval only works with a table inet family,
> not the ip family, unless there is something else going on (e.g., maybe I
> need to delete the set explicitly before changing the flag).
>
> The flag interval works for sets in the ip family. It was n
(ban has a bit over 11K lines).
I dislike writing documentation, and I'd guess so do the people working on
nftables. Further, since they spend their time immersed in the network
stack they have a lot of background information that it may be difficult
for them to recognize is unknown by their potential users. But the result
IMO is a mess.
Ross Boylan
On Sun, Sep 6, 2020 at 3:37 PM Dan Ritter wrote:
> Ross Boylan wrote:
> > I have a buster system with no disk, started by PXE boot and using NFS
> root.
> > It appears (details below) that dhcp setup is via ipconfig in one of the
> > initrd scripts (configure_networ
I have a buster system with no disk, started by PXE boot and using NFS root.
It appears (details below) that dhcp setup is via ipconfig in one of the
initrd scripts (configure_networking() in the "functions" script), with
ipconfig coming from klibc. So fiddling with the settings in dhclient.conf
o
Thanks for the information. Your questions are probably rhetorical, but
I've responded anyway, below :)
On Fri, Jul 31, 2020 at 11:38 AM Brian wrote:
> On Fri 31 Jul 2020 at 11:21:06 -0700, Ross Boylan wrote:
>
> > When I did the upgrade th
cript, so that it seems likely to have come from the invocation
of grub-install.
Thanks.
Ross Boylan
nging unexpectedly. Check for duplicate sources for address resolution,
> say duplicate entries in /etc/hosts. Check the resolution order in
> resolv.conf to make sure it's what you expect. Make sure that dhcpd.conf
> measures up to them. Also check if your IP interface names are chan
Running isc-dhcp-server, bind9, and tftpd-hpa I netboot a diskless system,
and entries for it go into DNS. But 30 minutes later they are withdrawn,
presumably by dhcpd.
I've enabled a lot of logging, but am having trouble getting a fix on what
the problem is. Any suggestions? 30 minutes is my dh
I had to restart my system, after having set the interfaces to auto, and
everything worked fine.
Generalizing freely, my problem is solved. It's a great relief: checking
that everything was OK after every reboot was a drag.
Ross
On Tue, Jul 14, 2020 at 2:57 PM Ross Boylan
wrote:
> T
Thanks to everyone for their help. Since I am using allow-hotplug, I'll
change that and see if it's enough to cure the problem.
Then I can look into the new filter tools.
Ross
On Tue, Jul 14, 2020 at 4:32 AM Greg Wooledge wrote:
> On Mon, Jul 13, 2020 at 06:41:39PM -0700, Ross
md/NetworkTarget
Any suggestions?
Ideally I would not be tied to the interface name, so that if I plug the
network cable into another port things will still work.
Thanks.
Ross Boylan
I have a computer I have been network booting into a buster system without
incident.
A few days ago I powered it off, and later in the day turned it on. It went
through the early phases of the boot OK, but never showed the graphical
login screen. I tried a couple of times, but it never started. A
On Tue, Jun 25, 2019 at 12:31 PM Pascal Hambourg wrote:
>
> Le 24/06/2019 à 01:40, Ross Boylan a écrit :
> >
> > # update-initramfs -u -k 4.19.0-5-amd64
> > update-initramfs: Generating /boot/initrd.img-4.19.0-5-amd64
> > /usr/share/initramfs-tools/hooks/cryptroot
ORIGINAL PROBLEM
Move disks into a new system (hardware) and found I couldn't boot into
the old system (OS on the disk). The initrd couldn't even see the
drives.
CAUSE
New hardware required drivers missing from the initrd, which had been
created with MODULES=dep. Also, fstab referenced a drive
I think you're right about the missing drivers, but fixing it has
proven challenging.
First, my original initrd was created with MODULES=dep. This was
somewhat hidden by the fact that in initramfs.conf, MODULES=most. :)
Apparently it was overriden by the setting in conf.d/driver-policy,
which I h
In brief: moved all the 3.5" disks from an old system to a new one,
and now I can't boot into buster. In the initrd environment no disks
appear in /dev; the disks are all connected through an LSI Host Bus
Adapter card (only on the new system). I can boot into Ubuntu on the
new system, and from th
On Mon, Jun 3, 2019 at 10:36 AM I wrote:
>
> I just noticed the reported journal size is exactly 1G, which would
> account for the difference:
> Journal size: 1024M
> That's assuming the units are bytes; if they are blocks, it's just a
> crazy value.
>
> I'll see what the extN experts h
I just noticed the reported journal size is exactly 1G, which would
account for the difference:
Journal size: 1024M
That's assuming the units are bytes; if they are blocks, it's just a
crazy value.
I'll see what the extN experts have to say.
Ross
# ls -l /dev/mapper/vgbarley-cache /dev/vgbarley/cache
lrwxrwxrwx 1 root root 8 Jun 1 17:26 /dev/mapper/vgbarley-cache -> ../dm-19
lrwxrwxrwx 1 root root 8 Jun 1 17:26 /dev/vgbarley/cache -> ../dm-19
On Mon, Jun 3, 2019 at 2:32 AM Henning Follmann
wrote:
>
> You cheat ;)
> please show that
>
>
# e2fsck -v -f /dev/vgbarley/cache
e2fsck 1.44.5 (15-Dec-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
8410 inodes used (6.42%, out o
On Sat, Jun 1, 2019 at 3:49 PM Gary Dale wrote:
>
> I suggest trying gparted to read the partition table on your drive.
> There may be a problem and gparted is usually pretty good at finding
> partition table errors.
>
Since the file system is sitting on an LVM logical volume, I don't
think the pa
# df -B4096 /var/local/cache/
Filesystem 4K-blocks Used Available Use% Mounted on
/dev/mapper/vgbarley-cache778160 191713529923 27% /var/local/cache
# e2fsck -v /dev/vgbarley/cache
e2fsck 1.44.5 (15-Dec-2018)
/dev/vgbarley/cache: clean, 8361/131072 files, 462129/1048576
df says my volume is 3G, but everything else says it's 4G. What's
going on and how can I correct it?
This question concerns the total reported space, not the free space.
The volume is an LVM logical volume on buster with an ext4 file
system. I originally mistakenly created it as 4TB in size.
Th
For at least the last couple of weeks I've had the screen go
completely blank during bootup, after displaying initial messages (I
changed from "quiet" to "debug" for kernel startup). This is with a
luks encrypted root. I saw it under jessie and buster. I blamed
failing hardware (I can't get into
I tested my suspicion that bind9-resolvconf was somehow implicated in
the bind9 start problems by returning bind9-resolvconf to its
original, disabled, state and restarting the system. Unfortunately,
it didn't help:
May 25 19:05:34 barley named[804]: /etc/bind/named.conf.options:2:
change director
On Wed, May 22, 2019 at 2:47 PM Richard Hector wrote:
>
> RequiresMountsFor=/absolute/path/of/mount
>
> .. to go in the unit file - or IIRC running:
>
> sudo systemctl edit bind9.service
>
> ... and putting in:
>
> ---8<
> [Unit]
> RequiresMountsFor=/var
> ---8<
>
> ... fol
/var is a separate file system, and like / it's encrypted, so it might
take a bit of time to activate it. Whether it's available when
needed, I don't know, though the error suggests it might not be.
Could systemd be launching services while some of the mounts (and the
required decryption) are stil
restarts would
have failed too, and they didn't.
Some kind of race condition?
The bind9 daemon is running as the bind user.
Ideas?
Thanks.
Ross Boylan
On Wed, May 15, 2019 at 10:39 AM Sven Joachim wrote:
> I am not really familiar with apparmor or resolvconf, but in
> /etc/apparmor.d/usr.sbin.named I found the following:
>
> ,
> | # support for resolvconf
> | /{,var/}run/named/named.options r,
> `
>
> which suggests that the sta
Sven, thanks for the tip about AppArmor. Yet another presumably
complicated system I've avoided learning about til now. I guess it's
time.
As to why bind is trying to open /run/named/named.resolvers: that is a
customized integration with resolvconf. It is not the default, but it
is something I
I have a new buster system with a bind setup based on (much) older*
systems, on which it worked fine. On buster, it doesn't.
In two different places in my configuration I referred to files or
directories that were outside of bind proper, and in both cases this
failed with permission problems.
I'm
On Tue, May 14, 2019 at 10:20 AM Ross Boylan
wrote:
>
> Noticing the "write on read-only" error, and remembering it should be
> read-only, I added that to the mount options. Which still failed, but
> differently:
Well, it failed differently in the sense that it succeeded :
Noticing the "write on read-only" error, and remembering it should be
read-only, I added that to the mount options. Which still failed, but
differently:
root@barley:~/tempserver-check# date; strace -f mount -r
/dev/stretch-vg/boot stretch_boot
Tue 14 May 2019 10:07:05 AM PDT
execve("/usr/bin/mount
Here's the info:
root@barley:~/tempserver-check# date; strace -f mount
/dev/stretch-vg/boot stretch_boot
Tue 14 May 2019 09:33:01 AM PDT
execve("/usr/bin/mount", ["mount", "/dev/stretch-vg/boot",
"stretch_boot"], 0x7ffed2c87238 /* 26 vars */) = 0
brk(NULL) = 0x5575487e
an encrypted one are slim.
Thanks.
Ross Boylan
EVEN MORE DETAILED DETAILS
Key commands and results, working from the bottom of the previous
stack up. dumpe2fs just before the last command:
mdadm -v --assemble --readonly /dev/md/media5 /dev/sdf2
Mon 13 May 2019 08:12:09 PM PDT
mdadm: looking for dev
When I attempt to mount a block device, I get the error:
-
root@barley:~/tempserver-check# date; mount /dev/stretch-vg/boot stretch_boot
Mon 13 May 2019 11:42:15 PM PDT
mount: /root/tempserver-check/stretch_boot: can't read superblock on
/dev/mapper/stretch--vg-boot.
Just wanted to draw people's attention to a couple of things:
"There are a number of work-arounds being discussed in the community.
These are not recommended as they may conflict with fixes we are
deploying. We’ll let you know when further updates are available that
we recommend, and appreciate yo
Thanks Cindy, Jonas, Curt, Trevor and Erwan for all the good info. I
wish my internet searches were as effective as yours!
I noticed a few days ago that I started having problems accessing a
lot of sites through https* (might have been on Windows at the time,
either FF or FF ESR). The errors alw
Running firefox-esr on buster I don't seem to be able to install
addons. I tried selenium IDE and katalon. Has Debian blocked the
installation of addons? I don't see indications of that in the docs
or the net.
Likewise, I know selenium (and maybe katalon) have had compatibility
issues with some
I made some discoveries on a test system:
root@IDTest:/etc# date; usermod -u 204 Debian-exim
Tue Mar 28 15:01:19 PDT 2017
usermod: user Debian-exim is currently used by process 664
and this left everything, including the running process and passwd untouched.
So I don't have to worry about what h
On Sun, Mar 26, 2017 at 2:47 PM, Joshua Schaeffer
wrote:
>
> On 03/25/2017 03:03 PM, Boylan, Ross wrote:
>
> The problem is that I can't convert to using a shared directory when
> different systems assign different uids to the same named user. In other
> words, to get to the shared accounts solut
On Sun, Mar 26, 2017 at 11:21 AM, deloptes wrote:
> Ross Boylan wrote:
>
>> The problem is that none of those will work if the existing uids/gids
>> on the systems are not already consistent, and they aren't.
>
> And the goal of your statement was what exactly?
T
The problem is that none of those will work if the existing uids/gids
on the systems are not already consistent, and they aren't.
Ross
On Sun, Mar 26, 2017 at 1:57 AM, deloptes wrote:
> Boylan, Ross wrote:
>
>> What can I do about this?
>
> I had samequestion at one point of time.
> There are pe
oblem with the replacement drive, and it (so far) went
away when I moved it into the main computer case.
Ross
On Fri, Feb 3, 2017 at 6:59 AM, Mark Fletcher wrote:
> On Thu, Feb 02, 2017 at 06:00:59PM -0800, Ross Boylan wrote:
>> I have multiple drives in a Vantec HX4 case connect
I have multiple drives in a Vantec HX4 case connect by USB 3.0 It
seems a disk I/O error* causes the entire USB connection to reset,
causing all the drives to be remapped and screwing up the connections
to all the disks in the case.
Is this expected behavior for the linux kernel?
I'm running lin
indows and expanded them to check.
5. I tried to install a fresh jessie system in some unused space, but
I can't get into my BIOS to get it boot off USB. The BIOS setting for
virtualization seems to have mysteriously turned off too. I realize I
could run debootstrap, but since I'm not ready to migrate for real
that seems a lot of work.
Thanks.
Ross Boylan
a bit sluggish; maybe ext4 on lvm wasn't the best choice for it.
Ross
On Mon, Dec 28, 2015 at 11:46 PM, David Christensen
wrote:
> On 12/28/2015 04:08 PM, Ross Boylan wrote:
>>
>> I have a diskless machine and figured it would be quicker to get it
>> running off a USB thumb
os. Which is
maybe not so great for grub, which needs more room. The live image is
about 1G and the thumb drive is 32G.
Thanks for any help.
Ross Boylan
2 volumes, and afterwards
ls /dev/markov02 shows both of them.
Any ideas what's going on?
Thanks.
Ross Boylan
P.S. Is there an official way to tell which logical volumes are active?
, with password live. Use sudo to get to
root. The system is running the ssh server, but it's not configured
to accept passwords.
Ross
On Sat, Nov 21, 2015 at 10:01 AM, Ross Boylan
wrote:
> Yes; I ended up with the Debian Installer. I think I've found the
> right place now.
Bob Holtzman wrote:
>> On Fri, Nov 20, 2015 at 12:10:38PM -0800, Ross Boylan wrote:
>> > So the operations are simply setting up an environment for doing the
>> > rescue, not overwriting the existing system? I'm happy to change my
>> > expectation if that&#x
first CD of the Debian live CD's.
Ross
On Fri, Nov 20, 2015 at 11:59 AM, Brian wrote:
> On Fri 20 Nov 2015 at 11:18:41 -0800, Ross Boylan wrote:
>
> > After booting the Debian 8.2 netinst iso I noticed a couple of oddities.
> >
> > First, I selected advanced and re
, and ext4 utilities?
If these are bugs, what package should I report them against?
Thanks.
Ross Boylan
2, 2015 at 1:57 PM, Ross Boylan
wrote:
> After the recent kernel updates one of my virtual machines won't start.
> GRUB runs and messages indicate the kernel is loaded and the initial
> ramdisk is loading. Then it says it can't find the root device (identified
> by correc
or what I
can do to correct it.
If my initrd got corrupted, is there a way to regenerate it?
Thanks.
Ross Boylan
Details:
The host and guest are running Debian 7.9 wheezy. I have another wheezy VM
that is fine, and a jessie VM that I used to read the virtual disks. The
virtual disks look l
19, 2015 at 1:21 AM, Joe wrote:
> On Sat, 19 Sep 2015 07:36:43 +0200
> wrote:
>
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On Fri, Sep 18, 2015 at 07:28:29PM -0700, Jimmy Johnson wrote:
> > > On 09/18/2015 07:11 PM, Ross Boylan wrote:
> On 09/18/2015 07:28 PM, Jimmy Johnson wrote:
>
>> On 09/18/2015 07:11 PM, Ross Boylan wrote:
>>
>>> When I download a pdf in iceweasel and click on the download icon to
>>> open the list of downloaded files, and click on a pdf file, gimp starts.
>>>
doesn't turn up anything. In particular
http://computers.findincity.net/view/635399295212048058250644/pdfs-open-in-gimp-on-linux-system
says to edit ~/.local/share/applications/mimeapps.lst, but that directory
is empty (though it exists).
Running wheezy.
Thanks.
Ross Boylan
Laine Stump provided this useful info on the libvirt-users list:
This commit (which was included in libvirt 1.2.12) may help you to a
solution:
commit 298fa4858ced29e2c42681635a5a8dcd6da0b231
Author: Josh Stone
Date: Wed Dec 3 16:01:33 2014 -0800
network: Let domains be restricted to loc
he result would be a loop.
Failing that, exporting the entries as they are created is necessary.
Any ideas?
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CAK3NTRAPND7UBLaTwiFus1AxR8dPXWr3C_8vQh1CEYX=gu7...@mail.gmail.com
er a kernel update a
reboot as soon as practical is advised.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/cak3ntrdm4meqrem6y
irt and virtio from inside the VM.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/cak3ntrcy4toh0uq2116ismpwd_0bjxfigyfesmk7zbedsm3...@mail.gmail.com
ently_drop_suid: 0
Host key verification failed.
I think the popup happened after the last debug line above.
Ross
On Fri, Feb 27, 2015 at 11:10 AM, Ross Boylan
wrote:
> I can ssh from machine A to B as user ross on both, using key-based
> login. ssh-agent is running under KDE on A. A i
are taken
as "No" for continuing connecting.
I have to run as root for sshuttle.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/cak3ntrdgewsp6+zyvnx8pzhon+arm6gpjfw-1xx+duxkey7...@mail.gmail.com
ewise,
if the physical machine has 8 cores, could I run several VM's with 8
cores each? My suspicion is that CPU's are shareable, but RAM is not,
but I don't know.
Thanks.
Ross Boylan
P.S. I don't need to be able to make the changes while the VM's are
live, though th
g extras the result is OK (i.e., not IDs allocated
in a way that conflicts with my desired scheme). But it's not clear
how I could install those packages later; the list of tasks under
aptitude does not include a "base packages" task. Maybe it's all
"essential" packages?
Th
Thanks Andrei, Scott and Curt for your help. I was only expecting
help on the general 32/64 bit issues, but since you asked, here are
some details about my particular goal.
I am trying to install Juniper's client 8.0 software from an rpm;
apparently they don't have a deb (there is a deb for the 7
need to to get 32 bit libs.
Could anyone explain what is going on and what I need to do so I can
run a 32 bit app? I'm trying to install Juniper Networks proprietary
client, which includes a 32 bit library binary without the source.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email
I thought maybe "tick" would be followed by "tock". I think that's
how Intel refers to its chip generations.
Thank you for increasing my cross-cultural understanding; I'm from the US.
Now, back to my understanding of grub and initramfs-tools...
Ross
--
To UNSUBSCRIBE, email to debian-user-req
On Thu, Nov 20, 2014 at 9:11 PM, Scott Ferguson
wrote:
> On 21/11/14 15:13, Ross Boylan wrote:
>> Over the last week I've repeatedly found my machine unbootable, in the
>> sense I couldn't get to a working system without intervention.
>> Sometimes I couldn't ev
he chroot. Not only did the system not boot off sda, when I
told it to prefer booting off sdb I didn't get back what I had before;
instead I got an older setup for sdb.
Could changing the boot order in the BIOS change the drive mappings
and screw up grub that way?
Thanks for any wisdom.
Ross
pdate seems to include a point release (at least base-files
changes) and a new linux kernel. I see some security advisories,
including the version bump for iceweasel, but nothing about, for
example, the kernel. And the debian web site says the last point
release was in July.
Ross Boylan
-
IP
> address.
Is ssh vulnerable if the outsider can't login?
Ross Boylan
>
> (Exactly which outside-accessible services do and don't expose the
> vulnerability isn't very clear at the moment AFAIK, so it's better to
> err on the safe side and assume they all d
but it just hung at that point.
On Thu, Sep 18, 2014 at 10:44 AM, Ross Boylan
wrote:
> Thank you for the pointer. Unfortunately, markov is dying and it is
> doubtful I can install anything new. The root file system is
> read-only and /var is full (though I can probably make some room on
&
p 2014 10:09:53 -0700
> Ross Boylan wrote:
>
>> You need a passphrase to unlock the secret key for
>> user: "Ross Boylan (work) "
>> 2048-bit ELG-E key, ID xxx created 2014-09-17 (main key ID yyy)
>
> Try installing gpg-agent, launching it on markov, and stor
00.gpg" | head -c 20 | hd
#this doesn't-- gpg prompts
ross@markov:~$ ssh kornak "cat markov/turtle.Lenny00.gpg" | gpg -d - |
head -c 20 | hd
You need a passphrase to unlock the secret key for
user: "Ross Boylan (work) "
2048-bit ELG-E key, ID xxx created 2014-09-17 (ma
Thanks everyone for the feedback. Bob asked for more information about
what is going on with my system. I have some dead or detached disks; since
they might come back I don't want to eliminate them from LVM's knowledge
yet.
Here's the fuller story. It seems simplest to explain chronologically.
7;t think that would have taken effect so early in
the installation process and b) I don't see why it would make 7.1 unknown.
Thanks.
Ross Boylan
TS
I don't see -- mentioned in the man page for start-stop-daemon or
rpc.mountd.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1381355477.29971.39.camel@localhost
Thank you. I guess I didn't RTFM closely enough!
Ross
On Wed, Oct 9, 2013 at 12:00 AM, Tom H wrote:
> On Tue, Oct 8, 2013 at 10:17 PM, Ross Boylan
> wrote:
> >
> > I have a fresh install of wheezy and am attempting to export some
> > directories. It's n
direct from the server machine or from a VM running
inside.
The only unusual thing I can think of is that I am using bridging; the
local subnet is associated with the bridge.
Any ideas?
Thanks.
Ross Boylan
Current key files:
/etc/default/nfs-server---
I removed network manager and have this in /etc/network/interaces:
# eth2 managed by bridge and not otherwise mentioned
auto br0
iface br0 inet dhcp
bridge_ports eth2
That seems to work with the kvm-ifup script provided by wheezy qemu-kvm.
Note I have not rebooted since setting this up, and
On Thu, Oct 3, 2013 at 5:14 PM, Bob Proulx wrote:
> Greg has made some excellent explanation and answers. I wanted to
> comment on a few other things.
>
> Ross Boylan wrote:
>
> > Arun made a suggestion that
> > > Your 'physical' device eth0/e
eeds to be added to the
bridge.
I believe that is done by the /etc/kvm/kvm-ifup script that is executed
when I launch the virtual machine.
It says, in part
switch=$(ip route ls | \
awk '/^default / {
for(i=0;i List the output of 'brctl -show'
But that's empty (s
reviewing man pages and various
other help. I'd appreciate any guidance.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1380697545.7443.17.camel@localhost
given that some disks are missing.
Obviously enough are present to run the system!
Ross
On Mon, Sep 2, 2013 at 12:39 PM, André Nunes Batista <
andrenbati...@gmail.com> wrote:
> On Thu, 2013-08-29 at 09:38 -0700, Ross Boylan wrote:
> > Running wheezy amd64 the kernel/libc upgrade
On Wed, Sep 11, 2013 at 5:59 AM, Alan Greenberger wrote:
> On 2013-09-10, Ross Boylan wrote:
> > --001a11c2be66bf88eb04e60200cd
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > Short version: Brother doesn't support linux. I'm considering Lexmark
Short version: Brother doesn't support linux. I'm considering Lexmark.
I too am looking for a B+W laser printer. I just got a Brother HL 5450 to
replace a 5150 I had. It fails to print some pages, and I'm sending it
back because Brother says they do not provide phone support for Linux.
They u
tec
enclosure connected by USB. I'm using lvm and luks crypto.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1377794301.3875.32.camel@localhost
On Sun, Aug 25, 2013 at 2:13 AM, Chris Bannister wrote:
> On Sat, Aug 24, 2013 at 12:40:36PM -0700, Ross Boylan wrote:
> > I was briefly able to use my scanner, but while the scanner application
> > (Skanlite) was running it became inaccessible. About that time the logs
> &g
have some disks connected via usb.
Thanks.
Ross Boylan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1377373236.1062.54.camel@localhost
1 - 100 of 609 matches
Mail list logo
