Pall Gone wrote on Thu, Mar 25, 2010 at 05:38:14AM +0100:
> Hi Joey
>
> I'm experiencing exactly the same problem.
>
> > Now here is where it gets strange. Testing a workaround...
> Ha, pressing a key and it works. Funny...
> I've tried to delay it before, but in the background, where this doesn
Klistvud wrote on Fri, Feb 05, 2010 at 12:49:47PM
+0100:
> On one of my Lenny installs, I had a somewhat similar (albeit by no
> means identical) problem that turned out to be due to some missing
> lines in my xorg.conf. The lines I had to add to xorg.conf in order
> to make things work as expect
Anthony Campbell wrote on Tue, Feb 02, 2010 at
06:42:32PM +:
> On 02 Feb 2010, Joey Morris wrote:
> > >
> > > Did you try running the xmodmap -e e stuff at the command line in an
> > > xterm? That might give you a clearer idea of what is wrong.
> >
>
Anthony Campbell wrote on Tue, Feb 02, 2010 at
08:35:29AM +:
> On 01 Feb 2010, Joey Morris wrote:
> > Anthony Campbell wrote on Mon, Feb 01, 2010 at
> > 09:13:41AM +:
> > > On 31 Jan 2010, Joey Morris wrote:
> > > > I start my X session with start
Anthony Campbell wrote on Mon, Feb 01, 2010 at
09:13:41AM +:
> On 31 Jan 2010, Joey Morris wrote:
> > I start my X session with startx, and lately I've noticed that some
> > (but not all) of my .Xmodmap settings are being lost once my X session
> > is up. I t
I start my X session with startx, and lately I've noticed that some
(but not all) of my .Xmodmap settings are being lost once my X session
is up. I think this behavior started sometime in the past month or two.
I'm using xmodmap to make Caps_Lock key a second Control_L. These are
the contents of m
/lib/dpkg/status
I notice also that the number after the version number of the output of
apt-cache policy changes to '-1'... the man page for apt-cache does not
explain what it means. This is the first time I have seen it displaying
anything other than '0'. Anyone know what th
Good afternoon,
Byrne
Good Bye
Byrne
Byrne
Byrne
Byrne
Byrne
Byrne
Byrne
Byrne
Byrne
Byrne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Any Software just in under $15-$99, Xp-adobe etc
http://fqsq.5cr28m5g2x5c26n.dngfbsjd.com
Saints should always be judged guilty until they are proved innocent.
Power tends to corrupt and absolute power corrupts absolutely.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
r-source/README.Debian". It's the usual
procedure for installing drivers: install an appropriate kernel-headers
package, then pick between module-assistant, debian/rules binary-module,
or make-kpkg.
> vu
Regards,
--
Sam Morris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a sub
send some
n the networking, and the hooking mechanism itself was
redesigned for efficiency. LSM should have significantly less overhead
than the 1-2% figure for web performance.
- James
--
James Morris
<[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Gentoo, SuSE and Fedora all accept this 2%.
Where do you get this figure from?
- James
--
James Morris
<[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
he hardware b44 was
no longer in the list.
I have a wireless onboard NIC on this machine too (it's an Intel
Centrino-based laptop) - could this be causing problems? How does a
user ensure the appropriate NIC is used for install?
Thanks,
Rua HM.
Rua Haszard Morris wrote:
From: Adam Aube <
From: Adam Aube <[EMAIL PROTECTED]>
Rua Haszard Morris wrote:
> >> I have a BroadCom 4400 NIC that is not being detected, leading to
> >> DHCP failing, leading to no additional .debs being available...
> > tg3 module contains support for BroadCom net cards
Cheers - I
Rua Haszard Morris wrote:
My question is how to I get this set up early in the install process so
I can proceed with install as normal?
Alternatively, how do I set up the card now that I have a very minimal
install & then proceed with base-config?
From: Adam Aube <[EMAIL PROTECTED]>
I be
but the filename was bcm4400-2.0.5.something.
> http://broadcom.com/drivers/downloaddrivers.php
> voila, and GPL license too.
joost
--
Rua Haszard Morris
Software Engineer & Research Assistant
MARCS Auditory Laboratories
University of Western Sydney
http://marcs.uws.edu.au
--
To UNSUBSCR
Hi,
I'm trying to install Debian. The problem is (i think) that my NIC is
not detected/set up properly.
I was running knoppix, and had successfully set up network using a
downloaded bcm4400 module
(http://www.broadcom.com/drivers/downloaddrivers.php), so I'm guessing
that there is some way I
Just been browsing and came across this dicussion, and thought i might be
able to give some input.
I'm a software grad (well this summer) and use both linux(gentoo 2.6.xxx
cant remember specifically) and xp pro sp1 as home os's (games, dev etc) and
when building a fairly small application i fel
Just been browsing and came across this dicussion,
and thought i might be able to give some input.
I'm a software grad (well this summer) and use
both linux(gentoo 2.6.xxx cant remember specifically) and xp pro sp1 as home
os's (games, dev etc) and when building a fairly small application i
??
Wondering in Oxnard, Cal
Wilson
Morris
On Fri, 2004-01-23 at 16:13, Kent West wrote:
> You may need to configure your system to use the correct module.
> "modconf" is your friend, then search down the lists for net/tulip.
> After installing this module (I think this is the correct module for the
> NetGear 311), you should be able to
OTECTED]
Sent: Wednesday, 14 January 2004 1:07 AM
To: [EMAIL PROTECTED]
Subject: Re: X "no screens" error with bf2.4 kernel and intel 810
graphics on laptop
Rua Haszard Morris wrote:
>> Hi,
>>
>> I'm doing my first linux install, on an Acer TravelMate 530, and
>> e
Hi,
I'm doing my first linux install, on an Acer TravelMate 530, and everything
went well until configuring XFree86.
I've tried specifying i810 drivers and just plain old vga drivers and when I
try to launch xinit I always get the "no screens" error.
I've downloaded drivers from intel, but the i
a vertical line of dots (perhaps 8 per-character
position).
Can anyone suggest a cure?
Thanks in advance
--
William Morris
william AT bangel demon co uk
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi Mark,
No I hadn't tried ldconfig, but it sorted out the problem, thanks! I'd read
a little bit about libraries a while ago, but could not remember where, or
what the commands were.
Cheers,
James.
~(sirromseventyfive)~
From: Mark Vojkovich <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
T
I'm running woody with the .1 update and have just compiled XFree86 4.3 on
my system. Other than having to install one development package (pam) I
thought all was hunky dory.
Before installing it, I decided I did not want to remove the older version
(4.1 i think) and all packages dependant on
Hi, I'm trying to install GEM, got past the ./configure stage and all is
well. Just when I enter ./install-sh I get the following error:
bash: ./install-sh: /bin/sh: bad interpreter: Permisson denied
what do I do?
cheers, jmorris
sirromseventyfive
___
One of my ide hard drives has been producing dma time out errors. I emailed
the compaq support team about this (among other things) and they pointed me
to
http://www.exocore.com/technologies/linux/rhl71dma/
(redhat dma problem)
there it says to permanently disable DMA for a particular drive b
version is
xscreensaver-GL 3.33-5. I didn't have this problem with previous versions of
xscreensaver-GL (3.33-3 specifically).
Thanks,
*****
Josh Morris
On Fri, 05 Oct 2001, Dale Morris wrote:
> I posted this sometime back and was never able to get a satisfactory
> solution. Maybe someone can give me some better pointers now..
>
> When I try to print a file using dvips quantum.dvi command, what prints
> out is the following:
&
On Fri, 05 Oct 2001, Dale Morris wrote:
> I posted this sometime back and was never able to get a satisfactory
> solution. Maybe someone can give me some better pointers now..
>
> When I try to print a file using dvips quantum.dvi command, what prints
> out is the following:
&
I posted this sometime back and was never able to get a satisfactory
solution. Maybe someone can give me some better pointers now..
When I try to print a file using dvips quantum.dvi command, what prints
out is the following:
%!PS-Adobe-2.0
%%Creator: dvips(k) 5.86d Copyright 1999 Radical Eye Soft
> > After my recent install and upgrade to woody I can't print tex
> > documents. Other printing seems okay, mail messages from mutt print
> > fine.
> >
> > xdvi displays the document properly, but when I try to print the
> > following file:
> >
> > $dvips quantum.tex
typo-- I meant $dvips quantum.
After my recent install and upgrade to woody I can't print tex
documents. Other printing seems okay, mail messages from mutt print
fine.
xdvi displays the document properly, but when I try to print the
following file:
$dvips quantum.tex
the printed output is not the document I viewed in xdvi, bu
On Sat, 22 Sep 2001, David Roundy wrote:
> On Sat, Sep 22, 2001 at 03:21:27AM -0700, Erik Steffl wrote:
> > Dale Morris wrote:
> > >
> > > On Sat, 22 Sep 2001, Dale Morris wrote:
> > >
> > > > Upgrading from potato to woody xdm was installed wit
On Sat, 22 Sep 2001, Dale Morris wrote:
> Upgrading from potato to woody xdm was installed with X. When I removed
> it, X starts back up using my .xsession file, but there are no window
> managers or terminals on the menu in fvwm2. Those selections have
> disappeared. What can I do
Upgrading from potato to woody xdm was installed with X. When I removed
it, X starts back up using my .xsession file, but there are no window
managers or terminals on the menu in fvwm2. Those selections have
disappeared. What can I do to get them back? Is there more recent
or more understandable do
I'm using potato with all recent upgrades and security fixes. I'm trying
to compile vim 6.0av and I receive the following error message when I
run make:
objects/os_unix.o: In function `mch_set_shellsize':
objects/os_unix.o(.text+0x1b4c): undefined reference to
`term_set_winsize'
collect2: ld return
Yep, reconfiguring the kernel made a big difference, printer is
printing a test page right now. I'm using the cups printing system
along with turboprint. It seems to work
thanks again for the help!
dale
On Sat, 15 Sep 2001, Ron Farrer wrote:
> Dale Morris ([EMAIL PROTECTED]) wrote:
>
> > When I do that I get the following:
> > [EMAIL PROTECTED] dlm lp
> > The user `dlm' is already a member of lp.
> > [EMAIL PROTECTED]
> >
> > that's what&#x
ECTED]
that's what's so frustrating..
thanks
dale
>
> HTH,
> Ron
--
----
|Dale L. Morris | Homepage: http://www.well.com/user/dlm |
|Massage Therapist
>
> > results of that command are:
> > [EMAIL PROTECTED]:~$echo test > /dev/lp0
> > bash: /dev/lp0: Permission denied
>
> What does this command show:
> ls -l /dev/lp*
Ron, it shows:
[EMAIL PROTECTED]:~$ls -l /dev/lp*
crwxr-x---1 root lp 6, 0 Jul 5 2000 /dev/lp0
crw-rw
On Sat, 15 Sep 2001, Ron Farrer wrote:
> Perhaps try something simple, such as:
> echo test > /dev/lp0
results of that command are:
[EMAIL PROTECTED]:~$echo test > /dev/lp0
bash: /dev/lp0: Permission denied
I'm still trying to get my printer working, not much luck. When I run
dmesg it shows:
PCI: Using IRQ router default [1022/7006] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initia
I'm trying to setup printing in woody using lprng. checkpc -f-V gives
me the following:ecking 'status.lp' file
checking 'status' file
checking '/var/log/lp-errs' file
checking '/var/log/lp-acct' file
Warning - lp: cannot open lp device '/dev/lp1' - No such device
Yet when type ls /dev lp0,
On Fri, 14 Sep 2001, James Ramsey wrote:
>
> --- Dale Morris <[EMAIL PROTECTED]> wrote:
> > I'm having trouble getting startx to read my
> > .xinitrc or .xsession
> > When I check the file /etc/X11/Xsession it seems
> > properly configured
> > to
On Fri, 14 Sep 2001, Josh McKinney wrote:
> On approximately Fri, Sep 14, 2001 at 09:25:00AM -0700, Dale Morris wrote:
>
> As far as I know there is no /etc/X11/XSession file. Try
> /etc/X11/xinit/xinitrc
Still doesn't work. I have commented out Xsession file from the
/etc/
I'm having trouble getting startx to read my .xinitrc or .xsession
file. I downloaded gdm but then removed it with the --purge option,
but still I can't get startx to read the init file. The way I have to
start the window manager is startx /usr/bin/X11/fvwm & then manually
change background and add
I have X working now, apparently I missed installing xfonts-base and
xfonts?75dpi.
On Fri, 14 Sep 2001, Dale Morris wrote:
> I just did a fresh reinstall of potato, then upgraded to woody. I
> didn't have a working X configuration, just changed my sources list
> and did dist-upg
I just did a fresh reinstall of potato, then upgraded to woody. I
didn't have a working X configuration, just changed my sources list
and did dist-upgrade.
Now when I try to connect to X my screen hangs with a little white
space at the top and then gives me the error message:
Fatal server error:
c
On Mon, 10 Sep 2001, Erik Steffl wrote:
> Dale Morris wrote:
> >
> > Yesterday I built the 2.4-9 kernel. The box crashed for no apparent
> > reason and now I just did an apt-get upgrade and destroyed Xwindows.
> > Here's what I think is wrong. I was trying to g
don't
remember. Then it exited with an error. I tried removing (didn't work)
Xwindows and installing x-window-system (didn't work) and ended up
with lots of error messages. Any way out of this short of a reinstall?
--
-----
On Mon, 20 Aug 2001, Dale Morris wrote:
> I've been working on true type fonts and can't get them to work on
> XF86-4.3. I'm using Paul Smith's TrueType Fonts on Debian XFree86 4.x
I was finally able to get true type font package working, but it
entailed reinsta
I've been working on true type fonts and can't get them to work on
XF86-4.3. I'm using Paul Smith's TrueType Fonts on Debian XFree86 4.x
Systems at http://www.paulandlesley.org/linux/xfree4_tt.html#NETSCAPE.
I'm sure I've configured it the way he recommends, but when I run
$ xset fp+ /usr/lib/X11
s no headache whatsoever. Sony Mavica's can be had for about
$300..
--
----
|Dale L. Morris | Homepage: http://www.well.com/user/dlm |
|Massage Therapist | PGP
e it is laid out for me or maybe put together a little
script fragment that will do the checking for me?
Thanks,
David
--
The Morris Family
David, Lori, Sarah, Emily and Anna
--
On Mon, 30 Jul 2001, Lute Mullenix wrote:
> Icewm, but that [EMAIL PROTECTED] gnome is still there. How do I GET RID OF
> IT? Is
> there a way to undo the update/upgrade so things will go back to the way
> they were before?
>
I have luck creating an .xsession file with entry
exec icewm-gnome
th
innovation-tk.com +itk
Hope this helps
Regards
--
William Morris
[EMAIL PROTECTED]
stallaion. Any advice?
I guess this will teach me not to touch anything marked "test" or
"unstable" if I don't know exactly what I'm doing.
Thanks for taking the trouble to reply.
Regards
--
William Morris
[EMAIL PROTECTED]
to stable
stuff (excluding the Xserver if possible)?
Thanks in advance
--
William Morris
[EMAIL PROTECTED]
How do I make Aspell the system wide spell checker for my system?
Currently I have it working for mutt, but I'd also like to use it with
vim and other apps. I tried doing a symlink but maybe didn't do it
right, it didn't work.
thanks
I'm looking to purchase a laptop, probably used and I want to install
debian linux on it. Can anyone point me to a good source or suggest a
brand or particular configuration? I'm not so concerned about speed,
but it might be nice to be able to hear/watch a cd.. I want to keep
price below $700 if
Since my latest apt-get upgrade and the newer version of
slrn(0.9.7-5), my download of newsgroups has slowed to a crawl. If I
remove the .slrnrc from my home directory, speed goes back to normal.
If I change the setup in the /etc/news/slrn.rc file, the same thing
happens. I've done the slrn.rc-conv
* Dale Morris <[EMAIL PROTECTED]> [010620 21:32]:
> I just finished filing a complaint with citibank because their
> citibankonline website isn't working with either Netscape 4.77 or the
> 6.0 version I have on my wife's computer. (I can log on, the page
> loa
I just finished filing a complaint with citibank because their
citibankonline website isn't working with either Netscape 4.77 or the
6.0 version I have on my wife's computer. (I can log on, the page
loads but returns an empty form..)
When I called Citibank support they give me the runaround that t
It's solved. I didn't have the proper packages which I
snatched with dselect.
thanks for the replys
In upgrading to woody, apsfilter no longer works. I've
run checkpc and checkpc -f to fix permissions and that
hasn't helped. Has anyone managed to get this working and if
so, what do I need to do?
I'm using an Epson Stylux Color 600 printer
kernel 2.4.2
thanks
Dale Morris [EMAIL PROTECTED] wrote:
> I just did a dist-upgrade to woody and when I try to start X I
> get the following error message:
>
> X: cannot stat /etc/X11/X (No such file or directory)
> aborting
> xinit: server error
>
> I will check the list archives (wi
I just did a dist-upgrade to woody and when I try to start X I
get the following error message:
X: cannot stat /etc/X11/X (No such file or directory)
aborting
xinit: server error
I will check the list archives (with lynx :-) and I know I
need to make a symlink somewhere, but I'm not sure to what.
I have a question about character sets. Currently I have my
locale set to US IS0-8859-1. Should I edit this to use other
locales, and if so, what locales should I use?
The problem I am experiencing is when I am using mutt to
read email, and I receive a mail from Thomas Kohler (I
think) it shows up
I have a question about character sets. Currently I have my
locale set to US IS0-8859-1. Should I edit this to use other
locales, and if so, what locales should I use?
The problem I am experiencing is when I am using mutt to
read email, and I receive a mail from Thomas Kohler (I think) it shows up
I have a LS-120 (Superdisc) on a compac that I've used with
linux. don't like it.. If convenient, or you're buying, I
would get a zip drive.
Sebastiaan [EMAIL PROTECTED] wrote:
> On Fri, 4 May 2001, [iso-8859-2] Szatori Péter wrote:
>
> > Hi
> >
> > At home I use a LS-120 drive and yes if you bu
I had *lots* of problems with this, what eventually worked
best for me was to install lprng package and go the
lprng webpage. There it gives instructions and commands to
set the proper permissions. After that, everything works
well.
HTH
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
>
> Hi Nelson,
> d
I have it working. I was able to remove ssmtp and it removed
a logrotate file that may have been the problem. Seems to
work fine.
Dale Morris [EMAIL PROTECTED] wrote:
> I seem to have screwed up my mail transfer abilities. I had sendmail
> installed, also ssh and whatever kde2 program th
I seem to have screwed up my mail transfer abilities. I had sendmail
installed, also ssh and whatever kde2 program that was similar. I
installed the xterm package from 'woody' and noticed that sendmail was
being replaced. When I try to send a mail in mutt, I can't, get
'operating system error' mess
I'm trying to find a file called local-guide.tex or
something similar, but several searches reveal nothing. The
file is a help file for latex and although I bought the
LaTeX User's Guide and Reference Manual, it looks like I
need this file. Any suggestions? Does Debian package this
file under anoth
When I first log into Xwindows, I can use the mouse in
Midnight Commander to select files. After I've been logged
in for a while, perhaps even an hour, I no longer can use my
mouse.
Originally I thought this was a problem of not having GPM
installed, so I installed it, but it doesn't make any
diffe
Doing some investigation, I find the problem lies more with StarOffice 5.2
than it does with my printer configuration. I changed lpd to lprng and have
configured it. ABI word prints fine, I can print from mutt, netscape, lyx,
etc.. but nothing happens with StarOffice, the printer just keeps spittin
Having just done another debian 2.2 reinstall, I'm having some printer
problems. I have installed the apsfilter package and it works fine printing
from netscape and printing text files, etc..
The problem is when I try to print from StarOffice. The printer starts but
nothing is printed to the page.
I would check the list archives, but I don't have X or Netscape to do that
with :(
I have just upgraded to woody with dist-upgrade and when I try to
connect to Xwindows using startx I get the following error message:
FontTransSocketUnixConnect: Can't Connect: errno =2
Could not init font path ele
Yes, I've done the adduser (myusername) cdrom.
Alson van der Meulen [EMAIL PROTECTED] wrote:
> On Thu, Mar 22, 2001 at 04:45:57AM -0800, Dale Morris wrote:
> > I installed 2.2 and upgraded to the 2.4 kernel. I configured my sound card
> > in the kernel and it works fine with
I installed 2.2 and upgraded to the 2.4 kernel. I configured my sound card
in the kernel and it works fine with real audio and XMMS. Problem is when I
put a cd in the cdrom drive and execute Gnome CD player, I get the following
error message:
Error accessing cdrom device
Please check to make sure c
I like slrn, it's easy to setup, just copy the .slrnrc.gz files to your home
directory, edit and download a list of news groups. Oh, you need jed editor
installed for standard .rc settings.
HTH
Andre Berger [EMAIL PROTECTED] wrote:
> On 20010305 17:57 +0100, Stephen Rueger wrote:
> > Has anyone
this is an easy one, /var was being filled by apt-cache and cleaned up by
running apt-get clean
Dale Morris [EMAIL PROTECTED] wrote:
> I just did a new cd install of 2.2. I have a 15g hard drive, 5g of which is
> a windoze partition, 5g for Linux and another 5 free space for BSD when I
>
Recently I did a 2.2 cd install of debian. Before I'd been running the
libranet version of debian. I am sourcing the keybind-1.2i file and it has
F1 linked to the mutt manual. But, it doesn't work. Trying to get vim to
read a .gz file doesn't work either, whereas it used to work with the
libranet v
Recently I did a 2.2 cd install of debian. Before I'd been running the
libranet version of debian. I am sourcing the keybind-1.2i file and it has
F1 linked to the mutt manual. But, it doesn't work. Trying to get vim to
read a .gz file doesn't work either, whereas it used to work with the
libranet v
I just did a new cd install of 2.2. I have a 15g hard drive, 5g of which is
a windoze partition, 5g for Linux and another 5 free space for BSD when I
finally get around to installing it. I just started watching the disk
contents, because I've set up disk partitions with 300megs for /var and /200
fo
I was able to get this working with a script that one of the list members
supplied me with. If you need it please email me and I will send it to you.
Dale Morris [EMAIL PROTECTED] wrote:
> I've been installing debian most all day, so I'm probably missing something
> really obvio
I've been installing debian most all day, so I'm probably missing something
really obvious here, but I'm having a real problem with the printer setup.
How do I get printing setup correctly in debian? I have installed lprng and
magic filter but I can't get it to print. I have also tried printtool,
Ethan Benson [EMAIL PROTECTED] wrote:
> On Mon, Feb 26, 2001 at 05:08:20AM -0800, Dale Morris wrote:
> > I just did a fresh install of 2.2 by cd. Couple of questions:
> > 1. I didn't have sound in my user directory, but had it as root. I did a
> > chmod 666 /dev/dsp and
ee if it works.. just a guess..
> Kundan
>
>
> -Original Message-
> From: Dale Morris [mailto:[EMAIL PROTECTED]
> Sent: Monday, February 26, 2001 10:01 PM
> To: debian-user@lists.debian.org
> Subject: Re: install questions
>
>
> Here's the erro
couldn't connect to display ":0.0"
Error in startup script: invalid command name "button"
while executing
"button .ref"
(file "scripts/kconfig.tk" line 51)
make: *** [xconfig] Error 1
Dale Morris [EMAIL PROTECTED] wrot
t;
> Kundan
>
> -Original Message-
> From: Dale Morris [mailto:[EMAIL PROTECTED]
> Sent: Monday, February 26, 2001 9:08 PM
> To: debian-user@lists.debian.org
> Subject: install questions
>
>
> I just did a fresh install of 2.2 by cd. Couple of questions:
>
I just did a fresh install of 2.2 by cd. Couple of questions:
1. I didn't have sound in my user directory, but had it as root. I did a
chmod 666 /dev/dsp and it works but I'm not sure that's the proper
permission. What's the right permission?
2. If I try to compile the kernel I get errors when I t
KDE doesn't initialize it's sound module when I start it up. I have sound
configured in the kernel (2.4.0) using the Ensonic 1371 sound card settings.
When I check the 'info' KDE isn't recognizing any sound card.
I am able to get sound by executing gmixer. Anyone have any suggestions?
thanks
-
My apologies for posting off topic. I want to bind the Alt key to the Meta
key in Emacs. Is there a simple 'newbie' way to do that?
thanks in advance
dale
It works now, after installing the base-config package
thanks
ktb [EMAIL PROTECTED] wrote:
>
> > On Sat, Jan 20, 2001 at 09:30:21AM -0600, ktb wrote:
> > > You should only have to have the "apt" package.
>
> On Sat, Jan 20, 2001 at 06:43:30AM -0900, Ethan Benson wrote:
> > actually it appears t
I am using it as root. Here's the error message:
lymond:/home/dlm# apt-setup
bash: apt-setup: command not found
I am sure there's another part of apt I need to install, but can't remember
what it is..
ktb [EMAIL PROTECTED] wrote:
> On Sat, Jan 20, 2001 at 03:41:52AM -0800,
When I issue the apt-setup command I get an error message, "..command not
found". What apt package am I missing? Otherwise apt works just fine.
thanks
will trillich [EMAIL PROTECTED] wrote:
> On Sun, Jan 14, 2001 at 03:49:08AM +0100, Norman Schmidt wrote:
> > Hi all!
> >
> > Another apt-problem..
1 - 100 of 306 matches
Mail list logo
