I have just completed an 'Upgrade' via apt-get (NOT a 'dist-upgrade').
The only resulting problem I'm aware of is that I can no longer dial out.
The TR (is that actually DTR) and RTS indicators on the modem are
switching on and off - off for about half a second, on for about a
second. If wvdi
Ok, I tried searching the archives and nothing came up. I'm not even
sure if the archive search is working. Even a general term such as
"print" brings up nothing. I'm using CUPS 1.1.10 (in sid) with the
EPSON Stylus Color 400 GIMP-Print v4.1.99b1 driver. The first job
prints perfectly, any job
run xfs-xtt, but I don't see any errors in it's logs, so I guess
it can read the fonts fine.
Rob
--
Robert Gill [EMAIL PROTECTED]
JabberID: [EMAIL PROTECTED]
ont 'fixed'
Oddly the speedo and type1 fonts seem to be exempt from these errors.
Anyone have a clue? I'll post my entire XFree86.log on request.
Peace,
Rob
--
Robert Gill [EMAIL PROTECTED]
JabberID: [EMAIL PROTECTED]
Although if you have other session-managers installed I'm not sure
which one it will start.
-Rob
--
Robert Gill [EMAIL PROTECTED]
JabberID: [EMAIL PROTECTED]
.options. I don't
think it's needed unless your using X11Forwarding.
--
Robert Gill [EMAIL PROTECTED]
JabberID: [EMAIL PROTECTED]
On Wed, Dec 27, 2000 at 03:55:15PM -0800, Nate Amsden wrote:
> yes for my gamin i wouldnt use anything but a voodoo3 under Xfree3.
> the nvidia drivers have some massive memory leaks and other odd
> issues. X4 under voodoo3 is known to be much slower then glide under
> X3(under X4 you must use Open
ably has something to do with the fact that the latest version of
X in unstable is a pre-release version. I heard the full release of
X 4.0.2 was just released today, so hopefully it will be quickly packaged
and most problems will be solved.
--
Robert Gill -- [EMAIL PROTECTED]
...
Ian W
--
From: Joost Kooij
Sent: 23 January 1998 20:06
To: Ian & Gill Watkins
Cc: 'Debian User (du)'
Subject:Re: xsession error
On Fri, 23 Jan 1998, Ian & Gill Watkins wrote:
> When I close my X session, one or more instances of the following message
appear
I give up!
I have tried to configure DOSEMU to run on my Debian system without
success.
I am dual-booting NT from the primary partition, so I can't build from
/dev/hda1 otherwise it comes up with "cannot load NTLDR" :)
I have a bootable DOS 6.2 diskette here which if I build a diskimge from
t
Can anybody suggest a good off-line news-reader that I can use with Linux?
I'd prefer one that comes with the Debian distribution - I've looked at
Netscape, but don't like the interface, I'd prefer a text-based one.
I just want to be able to connect to my news server, grab headers and
selected
When I close my X session, one or more instances of the following message
appear:
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
Any ideas what causes this?
Ian W
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble?
: Yes. Use an FTP site that carries unstable, and configure dpkg-ftp (through
: "[A]ccess") to use the directories "dists/unstable/main",
: "dists/unstable/contrib" and "dists/unstable/non-free".
This is noted in Scott Ellis's libc5 ==> libc6 upgrade FAQ; it addresses
many other points you will pro
I want to upgrade one or two of the packages on my system beyond the stable
distribution. The newer packages are all requiring libc6, but that conflicts
(in DSELECT) with libc5 which is a dependence to a _very_ large number of
programs. =:|
What should I do? Forget it and wait?
Ian W
--
, 1998 at 09:15:31PM +0500, Ian & Gill Watkins wrote:
> Can you use dselect and the unstable packages vis FTP. If so how?
Yes. Use an FTP site that carries unstable, and configure dpkg-ftp (through
"[A]ccess") to use the directories "dists/unstable/main",
"dists/unsta
Can you use dselect and the unstable packages vis FTP. If so how? I couldn't
seem to find a Packages file with all the unstable stuff (for instance tcl8)
How should I setup the FTP packages?
Ian W
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Tr
I have just built and (it would seem) successfully installed the 2.0.33 kernel.
The previous version I had was 2.0.29.
I had previously built and installed the NTFS read-only driver in v29 and it
had worked fine. Under 33 I am getting this error message when I do the make
mount:
sync
/sbin/ins
cm>I have had a look out on the net and it appears to be something to
cm>do with TCP/IP / DHCP but I could do with some fairly detailed info
cm>as to what to do as I am a linux newbie.
Most likely, you installed YP (also called NIS), but didn't set it up
right.
If you don't need NIS (or don't kn
Lets put it like this.
I tried installing FreeBSD, but gave up because the install routine was buggy
and plainly didn't work at points (this was to allow installs over a PPP link).
Debian had a straight-forward FAQ with "d/l this, this and this. If you have
one of these then you will need this"
How do I go about giving the Win95 workstations on my network access to the Net
via my Linux box?
They have TCP/IP installed and are using HOSTS & LMHOSTS files for name
resolution. I can ping both ways server->Win95 , Win95 ->server, but the Win95
boxes can't see beyond the server. The server
I have started receiving this message since installing the remainder / most of
the Debian system.
The domain on my home net is called watkins (original huh?).
I have had a look out on the net and it appears to be something to do with
TCP/IP / DHCP but I could do with some fairly detailed info a
Your pppd keeps sending Config Requests until it times out. Normally
LCP ConfReq is followed by "received LCP ConfAck" -- received from
remote pppd. So, in your case remote pppd is not running.
In minicom wait unitl you receive a line of garbage with many curly
brackets. That's remote pppd send
YO!
That did it. Thanks a bunch. I've been able to d/l most of the distribution
this evening!!!
Thanks a million.
Ian W
> I have been firing up Minicom to dial and log on, then CTRL-AQ to drop
> out of Minicom without reseting the modem (as described in the PPP-
> HOWTO) and then entering a co
I am attempting to get PPPD to work from my Debian Linux machine with a
marked lack of success
I have been firing up Minicom to dial and log on, then CTRL-AQ to drop
out of Minicom without reseting the modem (as described in the PPP-
HOWTO) and then entering a command thus:
pppd -d -detach /d
24 matches
Mail list logo
