just one more question, where is my local spool dir for mail?
- Original Message -
From: Alexandre Pereira da Silva <[EMAIL PROTECTED]>
To: Beavis <[EMAIL PROTECTED]>
Sent: Wednesday, April 12, 2000 12:13 PM
Subject: Re: receiving emial
> I think the right way is [
hi list:
i am wanting to become for familiar w/ the mailing
system of linux
if i have a ip address as follows:
62.234.24.5, can i reveive mail
via [EMAIL PROTECTED] or
[EMAIL PROTECTED]
if so, where does the mail go to? or do i
need to set up exim or fetchmail to retreive the mai
hello: this is currently what i have
Destination
Gateway
genmask
iface
255.255.255.255
*
255.255.255.255 eth1
localnet *
255.255.255.248 eth0
192.168.1.0
- Original Message -
From: Beavis <[EMAIL PROTECTED]>
To: George Bonser <[EMAIL PROTECTED]>
Sent: Saturday, April 08, 2000 6:32 PM
Subject: Re: routing table
> USING DEBIAN
>
> tried:
> ~# ifconfig lo 127.0.0.0 netmask 255.0.0.0
> ~# route add 127.0.0.0
i am trying tohe set up a dhcp service that will
utilize my gateway for an internet connection
i am using win 9x clients
so far i have set up 2 nic's
eth0, eth1
next i set up dhcpd-beta for use w/ multiple
nic's
i added the correct scripts and got the dhcp
service working
next i want to open
close
but localnet/8 is a unknown host
- Original Message -
From: Oswald Buddenhagen <[EMAIL PROTECTED]>
To: Beavis <[EMAIL PROTECTED]>
Cc: debian list
Sent: Saturday, April 08, 2000 5:36 PM
Subject: Re: routing table
> > what i want to do is add
> >
doesn't work!
- Original Message -
From: HENNEQUIN Eric <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, April 08, 2000 5:16 PM
> In-reply-to: <[EMAIL PROTECTED]> (message
from
> Beavis on Sat, 08 Apr 2000 17:07:53 -0700)
> Subject: Re: rout
what i want to do is add
dest.
gateway genmask
iface
localnet *
255.0.0.0 lo
when i run
route add 127.0.0.0 lo
i get
localnet
*
255.255.255.255 lo
i just want 255.0.0.0
how do i do
that?
i am currently in the middle of setting up a dhcp
for windows with
use of a dsl line
2 nic's
dhcpd-beta package
i was recently instructed by a friend to add the
foolowing lines in etc/init.d/network
/sbin/ipfwadm -F -p deny
/sbin/ipfwadm -F -a m -S 192.168.1.0/24 -D
0.0.0.0/0
i get
i am currently in the middle of setting up a dhcp
for windows with
use of a dsl line
2 nic's
dhcpd-beta package
i was recently instructed by a friend to add the
foolowing lines in etc/init.d/network
/sbin/ipfwadm -F -p deny
/sbin/ipfwadm -F -a m -S 192.168.1.0/24 -D
0.0.0.0/0
what is and
how do u change
passwords?
ok i found the root of the problem
i am unfortunatetly try to use
modules compiled for a 2.0.38 kernel w/ a 2.2.14
kernel
how do i get my modules back?
or recompile them for use w/ my new
kernel?
if i loaded a cdrom module for the old kernel, how
do i transfer it to the new one?
okok
here is where i am:
when i run lsmod i have no modules listed but
modconf still thinks they are there
i updated my kernel from 2.0.38 to 2.2.14 and i
don't think all the module info updated correctly
how do i do thiswhat i did was copy some of the
modules from /lib/modules/2.0
soory to update my own e-mail but i don't think i
am making any new modules
i am trying to update my kernel but unfortunately
after i try to:
make modules install ---i get an install
error
make[1]: ***[install] Error 1
make[1]: Leaving directory
'usr/src/linux-2.2.14/arch/i386/boot'
ma
hello,
since i updated my kernel the modconf doesn't show
any of my modules
how do i point the modconf to my new
modules folder /usr/src/linux/modules
i am getting an error now after updating my
kernel
the ftpd deamon says: -
Fatal: Group: Unknown group 'root':
therefore the service doesn't start
any suggestion before i hose down the
system??
how do u remove groups and
users
i infact tried that and got after dmesg:
eepro100-drivers
eth0: Intel EtherExpressyada.yada irq 9
receiver-blaha
General self test
Serial Sub-system test
Internel registers passed
then
tulip.c: drivers
eth1: Lito-OnMac ADress irq 5
but no tests.
w
eth0 is eepro100
eth1 doesn't exsist yet
- Original Message -
From: Robert Waldner <[EMAIL PROTECTED]>
To: Beavis <[EMAIL PROTECTED]>
Cc: debian list
Sent: Wednesday, April 05, 2000 3:59 PM
Subject: Re: installing two NIC's
On Wed, 05 Apr 2000 15:30:20 PDT, Bea
apter??
--beavis--
yes, they are both pci cards
is there a way to change the irq's physically?
- Original Message -
From: Robert Waldner <[EMAIL PROTECTED]>
To: Beavis <[EMAIL PROTECTED]>
Cc: debian list
Sent: Wednesday, April 05, 2000 3:30 PM
Subject: Re: installing two NIC's
On
ilities to manually configure your NICs IO addressand
IRQ's?
thankx --beavis--
using
intel pro 10/100
--eepro100 works great!!
linksys 10/100 -- trying to use ne2k-pci
getting following error init_module: Device or
resource busy
that was what prompted me to check the IRQ
after trying to run ~#fr
>
> > i get the following message /usr/local/bin/fr: exec: wish: not
> > found
>
> gotta install wish! search the packages for wish. It's in there
> somewhere. Not sure what it does, but it's there.
>
> >
>
> > any ideas would be appreciated.
>
> >
>
> > thankx --beavis--
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] <
/dev/null
>
>
i had a program that would open up a file just by
clicking a mouse,
now, after i have refurished my system, it asks me
which program to use to open it.
I have pico installed, but it doesn't work
when i select pico
anyone have a better
alternative?
ar xf - $ cd FileRunner-2.5.1
$ln -s /usr/local/lib/FileRunner-2.5.1/fr
/usr/local/bin/fr
so after trying to run ~#fr
i get the following message /usr/local/bin/fr:
exec: wish: not found
any ideas would be appreciated.
thankx --beavis--
ok, is it possible to open a x-windows interface through a ssh connection
from a remote location all on static IP's?
DSL to DSL from example.
more specifically, start x from a ssh client on another system.
if so, please don't just say it is possible, but explain how
thankx --beavis
i got the following trying to init. IP
Masq.
ipqadm: setsockopt failed: Protocol not
available.
any ideas why?
beavis
how do u delete modules
for example the pcmcia
module
when trying to load a frontpage web
i get the error /etc/apache/etc/srm.conf can't be
accessed permission denied.
how can i change the permission on that perticular
file so that anyone and everyone has permission.
expecially forntpage2000's
publisher..
thankx again list
--beavis
i am having a tuff time setting up any virtual webs
on my machine during the setup procedure. when it asks
Do you want to install Virtual Webs
(y/n)?
i answer yes and it just scrolls
forever
1) virtualwebs1
2) virtualwebs2
etc..
i have tried using the httpd.conf and srm.conf
fconfigu
- Original Message -
From: Beavis
To: debian list
Sent: Monday, March 27, 2000 11:58 AM
Subject: permission denied
i am trying to run
fp_install.sh i get a bash error
bash: /usr/local/fp_install.sh: Permission
denied
anyone know why?
tamnkx beavis
i am trying to run
fp_install.sh i get a bash error
bash: /usr/local/fp_install.sh: Permission
denied
anyone know why?
tamnkx beavis
i am install StarOffice-3.1 from a tar because i
could not find it in a deb format.
it say upon installation, can't load library
libg++.so.27
i have the g++ engine installed.
what package could i be missing?
thankx as always beavis
what is ypbind
my xconsole keeps saying that it times
out:
Mar 24 .. spy ypbind[259]: broadcast:RPC: Timed
out.
what does that mean and how do i either fix it or
get rid of it.
just asking,
beavis
how do i reconfigure my network
change my ip, dns, gateway, etc.
thankx
how do i change the dns?
replies
--beavis--
there an easier way around this?
> [EMAIL PROTECTED] (Beavis) wrote:
> >hello, i installed a few .deb manually meaning
> >
> >dpkg -i
> >
> >but dselect thinks that are are still unconfigured, which is not true
>
> They aren't just in obsolete/local? I
hello, i installed a few .deb manually
meaning
dpkg -i
but dselect thinks that are are still unconfigured,
which is not true
how do u reset the deselect so
that it doesn't pick up the packages as existing in the system
the packages are kdebase, kbelibs2g
tkankx beavis..
m, or are there ways to
debug it? Not meaning to ask too many questions at once, but i am kind of
new at this.
thankx for any replies...take care...beavis
> > What system are you using? I installed FP Ext and the tools on a Debian
> slink
> > 2.1 and did not ha
hello Linux list
i am wanting to start kde as my default x-windows
manager
i am going to edit my ~/.xinitrc with the
following
exec currently set to
wmaker
what do i specify for
KDE?
sh {start|stop|reload|force-reload|restart}"
exit 1
esac
exit 0
but how do i make a symlinks
to it:
/etc/rc[RUNLEVEL].d is where you have to put symlinks to this script
i am a newbie
ls
- Original Message -
From: Ron Rademaker <[EMAIL PROTECTED]>
To: Beavis <[EMAIL
/sshd
> start-stop-daemon --start --quiet --pidfile /var/run/sshd.pid --exec
> /usr/sbin/sshd
> echo "."
> ;;
>
> *)
> echo "Usage: /etc/init.d/ssh {start|stop|reload|force-reload|restart}"
> exit 1
> esac
>
> exit 0
>
>
>
&g
this script
>
> Ron
>
> On Mon, 20 Mar 2000, Beavis wrote:
>
> > everytime i reboot my linux box i have to run the ssh deamon
> >
> > where can i put a line to tell it to start the ssh service at bootup
> >
> > thankx
> >
>
>
using
/dev/saux
works fine!
thankx for all the replies everyone
thankx A. Sullivan
> On Fri, Mar 17, 2000 at 06:17:26PM -0800, Beavis wrote:
>
> > Detected PS/2 Mouse Port.
> > i am using the /dev/ttyS01 during config. my systems says
> > ttyS01 at
> >
hello list:
does anyone have a good source for QT ver 1.44 in deb format
i am having problems compiling fomr at tar
thaknx
- Original Message -
From: Bruce Sass <[EMAIL PROTECTED]>
To: Stephan Hachinger <[EMAIL PROTECTED]>
Cc: Beavis <[EMAIL PROTECTED]>; Debian
everytime i reboot my linux box i have to run the
ssh deamon
where can i put a line to tell it to start the ssh
service at bootup
thankx
i am trying t update my qt1g version 1.40-1.1 to
1.44-5
i can only find it as a tarball and when i go to
install it get a errors
mainly moc errors
first it enters the directory
/usr/local/qt/src/moc
moc.y:33: qlist.h: No such file or
directory
.
.
finally ending w/
moc.y:50: confused by ea
ething, do i need moc?
does anyone have a deb source for qt-1.44 (sure be
alot easier)
i am currently installing from tarball
thankx for any replies
beavis (butthead says "come to
butthead")
hello list
this is what i am trying to do but a get an
error:
checking for Xconfigure: error: Can't find X
includes. PLease check your installation and add the correct paths!
i have x loaded w/ xmaker and blackbox, what
package am i missing?
>2.5 Compiling from Source Code
>Gene
i am trying to load a deb form of kde
i can't get the apt-get tp point to the right
directory
this is what i am trying to do:
These Debian packages should be apt-get'abl using
the following/etc/apt/sources.list template. Please note you will need
toverify the path.
deb ftp://ftp.kde.or
> i tried running it frm the command line a got:
> can't load library libXt.so.6
>
> u would think it would install everything it needs!
>
> any ideas, should i dslect and install it or does anyone have a good
source
> for ti?
>
> thabkx again
>
>
> ----- O
i want to change my environ. var. to use the
new netscape version.
where is my .bashrc?
i ma using slink 2.2.14
this is the next step...
It is
recommended that you make use of the MOZILLA_HOME environmentvariable in
your .cshrc, .profile, or equivalent.
MOZILLA_HOME shouldbe set to th
hello,
i am trying to set up blackbox for my
x-windows
i get a config error:
blackbox requires the X Window System libraries and
headers
which packages do u think it is referring
to?
thankx beavis
r and XF86-SVGA server
colors look ok
any ideas would be appreciated.thankx again
debianlist
beavis (butthead says
hi!)
then
halts.
the last line reads: waiting for x server to shut
down
any ideas what could cause this and more
importantly, how to fi it?
thankx in advance beavis
:
connection refused (errno 111): unable to connect to x
server
xinit:
No such process )errno 3): Server error.
anyone
have any ideas?
thankx
in advance beavis
-1.2.27.tar.gz
# cd ssh-2.0.13# ./configure# make#
make install
looked at the files:
/etc/sshd_config
/etc/ssh_config
seemed fine
also do i need to create the /etc/ssh_known_hosts
to do this?
how can i correct this problem?
thankx beavis
hello
i need help setting my linux box up for a ssh
connenction
using putty on win98 wanna contact linux box via
ssh
what do i need to load to setup up
authticatyion
later
gt; >
> >
> > - Original Message -
> > From: Andrei Ivanov <[EMAIL PROTECTED]>
> > To: Beavis <[EMAIL PROTECTED]>
> > Cc: debian list ; > ;>
> > Sent: Wednesday, March 08, 2000 4:04 PM
> > Subject: Re: error message
i am trying to run a script call
fp_install.sh
but my slink box says run is not a command, what do
i try
install?
ok, thankx i figured it out
my next question is, how do i set up ssh on my slink box?
i looked through all the dselect pachages and couldn't find anything.
also, how do i change the time on my box?
- Original Message -
From: Andrei Ivanov <[EMAIL PROTECTED]>
To: Bea
hello everyone:
i have recently dicided to try and load fp
extensions
after untar, i have created a directory
/tmp/frontpage/version4.0
i read the readme.html and it is of not use!
anyone know where i can find instructions on how to install the extensions?
thankx in advance
using s
i am getting this error message after loading my
new kernel
slink 2.2.14
Failed to open
configuration file /etc/exim.conf
i looked in /etc and it is not there! do i
need to point it to look somewhere else?
thankx beavis
sure
everything is dandy?
beavis (not butthead!)
the directions to compile a new kernel
suck!
this link has inaccurate information
http://www.linuxhelp.net/guides/lyte/kernel.phtml
there is no instruction to make as86 or make
install
anyone know of a good source for directions to
compile and load a new kernel?
i am trying to compile the kernel 2.2.14 on to my i386 machine
please help if u can, thnakx
update:
after doing make bzImage, it starts to compile, which takes about 10 mins
or
so right.
then at the end it says:
>
as86 -0 -a -o bbootsect.o bbootsect.s
make[1]: as86: Command not found
make[1]:
i am trying to compile the kernel 2.2.14 on to my i386 machine
please help if u can, thnakx
update:
after doing make bzImage, it starts to compile, which takes about 10 mins or
so right.
then at the end it says:
as86 -0 -a -o bbootsect.o bbootsect.s
make[1]: as86: Command not found
make[1]: ***
this is what i am doing:
>Once that is all done and you choose "Exit" and save your config file, you
must >run make dep followed by make clean. And now the fun begins, type make
>bzImage to build your kernel. This will take awhile (15mins+) so go browse
>our site a little and send us some feedbac
ections, how do i
open it again and also, is there any way to make linux only accept a telnet
connection from a specific remote server?
thankx beavis
going from newbie to pro
sometimes i try to read the help files, but they
come down to fast
how do you pause the scrolling text?
the pause/ break button doesn't seem to
respond
i know this is a dumb question, but maybe somebody
will get a good laugh!
ok, i downloaded the file fp40.linux.tar.gz
i put it threw gzip making it afile
sorry to ask such a dumb question, but know what?
i looked all over that site, but nothing specific to linux
thankx in advance
- Original Message -
From: aphro <[EMAIL PROTECTED]>
To: Beavis &
thankx in adavnace
beavis
73 matches
Mail list logo
