, Apr 4, 2016 at 9:19 PM Alphonse Ogulla wrote:
> Greetings.
>
> I'm running Jessie on an Acer Aspire 5745DG laptop with a Broadcom
> BCM43225 wireless chip. Wireless LAN has always worked flawlessly
> until recently when it started disconnecting abruptly, showing not
> avai
, Apr 15, 2016 at 8:22 PM Alphonse Ogulla wrote:
> The output of the "wireless-info" script when wireless disconnects then
> becomes "hardware disabled" is pasted below.
>
>
> ## wireless info START ##
>
> Report from: 08 Apr 2016 14:21 EAT +03
, KERNEL=="eth*", NAME="eth3"
# USB device 0x:0x (r8188eu)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*",
NAME="wlan1"
# US
Greetings.
I'm running Jessie on an Acer Aspire 5745DG laptop with a Broadcom
BCM43225 wireless chip. Wireless LAN has always worked flawlessly
until recently when it started disconnecting abruptly, showing not
connected, hardware disabled then disappearing from Network Manager.
The laptop only ha
00 KHz), (N/A,
> 2000 mBm), (0 s)
> [81756.330447] cfg80211: (5735000 KHz - 5835000 KHz @ 8 KHz), (N/A,
> 2000 mBm), (N/A)
> [81756.330451] cfg80211: (5724 KHz - 6372 KHz @ 216 KHz), (N/A,
> 0 mBm), (N/A)
> [81756.339190] brcmsmac bcma0:0: ops->tx called while down
> [81756.339202] brcmsmac bcma0:0: ops->tx called while down
> ...
> ...
> [81756.395272] brcmsmac bcma0:0: ops->tx called while down
--
Thanks & Regards
Alphonse Ogulla
d64-netinst.iso which I downloaded using Google Chrome
and burned onto a USB flash drive using dd package for Windows 7.
Rgds,
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...
On Tue, Aug 13, 2013 at 7:25 PM, green wrote:
> Alphonse Ogulla wrote at 2013-08-13 04:02 -0500:
>> Aug 10 23:05:57 curiosity kernel: [ 3601.433022] thinkpad_acpi:
>> THERMAL EMERGENCY: a sensor reports something is extremely hot!
>> Aug 10 23:05:57 curiosity kernel: [ 3601.
On Tue, Aug 13, 2013 at 6:02 PM, Tom Grace
wrote:
> On 13/08/13 13:19, Alphonse Ogulla wrote:
>>
>> The system is going down for system halt NOW!
>>
>> Regarding the canned air solution, is it a one-off job to clean out
>> the CPU heat sink or is it for a continuo
On Tue, Aug 13, 2013 at 3:19 PM, Alphonse Ogulla wrote:
> On Tue, Aug 13, 2013 at 12:15 PM, Tom Grace
> wrote:
>> On 13/08/13 10:02, Alphonse Ogulla wrote:
>>>
>>> After a lot of googling, I decided to tear down the laptop, expose the
>>> cooling fan and
On Tue, Aug 13, 2013 at 12:15 PM, Tom Grace
wrote:
> On 13/08/13 10:02, Alphonse Ogulla wrote:
>>
>> After a lot of googling, I decided to tear down the laptop, expose the
>> cooling fan and give it a good vacuum job to get rid of any dust that
>> might have a
puinfo | grep model
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz
Please give me hints on how to get this old laptop back to full
functionality without the overhea
Try gEDA, the electronics design automation set of tools. The
project's home page is http://www.geda.seul.org.
Alphonse Ogulla
Sent using Nokia N73
On 3/23/08, jeffry s <[EMAIL PROTECTED]> wrote:
> i need a software to draw a circuit. in my circuit there is one micro
> cont
Hi,
Is the LVM command pvcreate destructive?
I want to add my entire slave drive (hdb) with one partition to the
exiting volume group.
Will initializing the drive with pvcreate destroy all data on that drive?
Rgds,
Alphonse
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsub
On 7/4/05, Dave Howorth <[EMAIL PROTECTED]> wrote:
> Alphonse Ogulla wrote:
> > Hi good people,
> > I wish to get your views on how I can implement a system that will
> > capture text of a financial document that is to be printed, run a hash
> > algorithm (SHA-1)
On 7/4/05, Lee Braiden <[EMAIL PROTECTED]> wrote:
> I'd be worried about why you need to validate an invoice or receipt in the
> first place.
Local regulations stipulate so. I really don't know why but ill make
an effort to find out why this is the case.
--
Rgds,
Alphonse, Nairobi-Kenya
criticism are welcome.
--
Thanks in advance.
Alphonse Ogulla
Nairobi, Kenya
Hi All,
I'm trying to do a cvs checkout from a debian beast on the company
network but get the error.
cvs [login aborted]: connect to cvs.digium.com(66.250.69.240):2401
failed: No route to host
I'm connected to the internet via a proxy firewall. Does this imply
specific ports required by cvs are
Hi all,
Can I simply use dd to clone my failing hard disk (hda) onto another
(hdb) of the same size as follows:
# dd if=/dev/hda of=/dev/hdb bs=512
Or will norton ghost do a better job? Btw, what advantages does ghost
have over dd or vice versa?
Thanks,
Alphonse Ogulla
Nairobi, Kenya.
d much more.
--
Alphonse Ogulla | The box said 'Designed for Windows NT or
University of Nairobi, Kenya| better,' so I installed Debian GNU/Linux
+-
-
University of
n s3virge card?
try the X server for your video card; xserver-s3v
apt-get install xserver-s3v
then use XF86Config as the configuration file and not XF86Config-4
--
Alphonse Ogulla
Nairobi, Kenya
"I choose to use Debian GNU/Linux not because it is easy, but because it is
hard"
--
To
issues with
Linux?
Thanks & regards
--
Alphonse Ogulla
Nairobi,Kenya
"I choose to use Debian/GNU Linux, not because it is easy, but because it is
hard."
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
alias char-major-81-0 bttv
alias char-major-89 i2c-dev
alias char-major-145 r128
alias char-major-175 agpgart
options agpgart agp_try_unsupported=1
then run 'update-modules' to regenerate /etc/modules.conf
then to load neccessary modules at boot time, do;
echo tuner >> /etc/modules
ech
On Thursday 29 January 2004 08:54, Paul Johnson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Wed, Jan 28, 2004 at 02:21:04PM +0300, Alphonse Ogulla wrote:
> > It appears that I'm only getting a small percentage of all the mail
> > traffic on this l
It appears that I'm only getting a small percentage of all the mail traffic on
this list. I sent 3 posts yesterday but got nothing back from debian-user.
Is anyone else experiencing this problem? Please CC me in your replies.
--
Alphonse O
cp ip networking!
> Debian Linux 1.3.1
>
tried your CL on woody 3.0r1 and route 1.98 echoed the following error:-
route: netmask 255.255.255.0 doesn't make sense with host route.
try:-
route add -host 192.168.1.2 dev eth0
--
Alphonse Ogulla
Nairobi, Kenya
-
te (61 log messages over 61 minutes) Are you
> running
> something like nautilus?
I resolved an identical problem recently. Check out this post from the
archives.http://lists.debian.org/debian-user/2004/debian-user-200401/msg05812.html
I hope this helps
--
Alphonse Ogulla
Nairobi, Kenya
twork resources from windoze clients.
What I have in mind is using NIS or LDAP for authentication and NFS for
network shares but the problem is obtaining free/cheap client software.
Please enlighten based on your experiences.
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [
twork resources from windoze clients.
What I have in mind is using NIS or LDAP for authentication and NFS for
network shares but the problem is obtaining free/cheap client software.
Please enlighten based on your experiences.
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [
On Monday 19 January 2004 19:15, Alphonse Ogulla wrote:
> > Hi,
> > I recently got a BenQ 48X48x24x16 ATAPI CD-R/RW/DVD combo drive and
> > managed to get it working with Debian GNU/Linux and custom kernel 2.4.24
> > using the generic scsi library. I think its wor
CTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Monday 19 January 2004 18:13, Alphonse Ogulla wrote:
> Hi,
> I recently got a BenQ 48X48x24x16 ATAPI CD-R/RW/DVD combo drive and managed
> to get it working with Debian GNU/Linux and custom kernel 2.4.24 using the
> generic scsi library. I think its working because at least i
error message is repeated over and over in all virtual consoles I
swich to thus giving me no space to type any command or do any useful work.
Grateful if someone can save the situation and show me how to stop sr0 from
taking over my PC.
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, ema
Got 200 plus mail bombs in my pop3 account this morning. Luckily I used Kmail
and filtered (deleted) every incoming message of size greater than 40Kb. Just
wondering, is swen back from holiday? How you people managing?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL
Just for the record, does the acronym OP stand for Original Post?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
e" at the prompt.
NB: Changing BIOS settings described above can affect how some other
existing OS functions. And another small thing, please do not reply to a
mail when posting a afresh. Compose a new mail and use a subject that
briefly explains the
unstable and testing respectively. I would apreciate
any assistance on how to go about it through upgrading/downgrading etc and
not via a fresh install.
Thanks & regards,
--
Alphonse Ogulla
Nairobi, Kenya.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscr
The last three lines are repeated five times. This brings me to my question.
Where should I put my one line script 'route00' in order to add an extra
route to a network without seeing the above errors on startup?
Thanks & regards,
--
Alphonse Ogulla
Nairobi, Kenya
--
To
Bill Goudie wrote:
> On Mon, Jan 05, 2004 at 03:13:28PM +0300, Ogulla, Alphonse wrote:
> > I'm using Woody and kernel versions 2.4.18-686, 2.4.21 & 2.6.0. The
> > system boots up and functions well when powering up from either of the
> > 2.4 kernels but ocassionally fails to boot when changing from
th Linux out-of-box and modem drivers are not
requisite.
Connect the modem to the serial port, say /dev/ttyS1 and use a program
such as minicom to configure the modem and get going.
$ man minicom for usage and extra detail
Got a similar modem, (3com US Robotics 56K Faxmodem) and used 'pppconfig"
tools, e2fsprogs and procps
(requisite for kernel 2.6.0) from source simply because I couldn't find the
respective deb package or probably the deb package failed on my system.
At the moment, the command 'apt-get check' does not report any conflicts.
Thanks & regards,
--
Alphon
On Monday 06 October 2003 16:08, Ogulla, Alphonse wrote:
> -Original Message-
> From: Nicos Gollan [mailto:[EMAIL PROTECTED]
> Sent: 06 October 2003 13:17
> To: [EMAIL PROTECTED]
> Subject: Re: Xv video driver expires after xfree86 upgrade
>
> On Monday 06 October
r or xine.
Thanks and regards,
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
What package provides the java executable for konqueror or KDE3 in general? I
enabled java globally in konqueror's settings but when trying to access a web
site that requires java (eg yahoo chat), I get the Java executable not found
error.
Regards,
--
Alphonse Ogulla
Nairobi, Kenya
-
> On Monday 06 October 2003 11:21, Alphonse Ogulla wrote:
> > Up to very recently, I could watch vcd movies on my box using xine video
> > player with Xv as the video driver. However, I came to discover yesterday
> > that Xv video driver had become inoperative after either
On Monday 06 October 2003 13:06, Alphonse Ogulla wrote:
> On Thursday 02 October 2003 20:10, Dan Anderson wrote:
> > FWIW I just checked my mail @ mail.yahoo.com using konqueror.
> >
> > -Dan
> >
> > On Thu, 2003-10-02 at 10:35, Alphonse Ogulla wrote:
>
On Thursday 02 October 2003 20:10, Dan Anderson wrote:
> FWIW I just checked my mail @ mail.yahoo.com using konqueror.
>
> -Dan
>
> On Thu, 2003-10-02 at 10:35, Alphonse Ogulla wrote:
> > Unable to open mail.yahoo.com in konqueror as non root for the simple
> > fact th
r probably this may just happen to be a bug.
Regards,
--
Alphonse Ogulla
Nairobi, Kenya
Debian 3.0r1 "woody"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ideas I still will give it a shot. I'm out of ideas.
>
what are the permissions of /etc/ppp/peers/highstream.net? Issue ls -l against
the file and post the output.
Alphonse Ogulla
Nairobi, Kenya
--
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ame error message. Yes I am discouraged. Thanks for the help
> > and if anyone has any ideas I still will give it a shot. I'm out of
> > ideas.
>
> what are the permissions of /etc/ppp/peers/highstream.net? Issue ls -l
> against the file and post the output.
In addition, post
Unable to open mail.yahoo.com in konqueror as non root for the simple fact
that yahoo wants to dump some cookies at / (root) directory for which I have
no permissions. Anybody experience this strange behaviour?
Alphonse Ogulla
Nairobi, Kenya
--
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
2 12:06 peers
How does one explain this? Is the file /etc/group cached somewhere and updated
only so often? How can the changes be forced to take effect immediately
without exiting and logging in again?
Regards,
Alphonse Ogulla
Nairobi, Kenya
--
--
To UNSUBSCRIBE, email to [EMAIL
On Thursday 02 October 2003 12:36, Alphonse Ogulla wrote:
> Hi all,
> I configured ppp successfully using pppconfig and make use of pon/poff
> commands to bring up and bring down the link respectively. However, pon
> only works when ran as root and refuses otherwise.
>
> [EMAIL
argument to use
another file in /etc/ppp/peers directory.
Is it possible to run pon as non root? Tried changing some parameters in
/etc/ppp/options and /etc/ppp/peers/provider with little or no success.
Anyway, if it is possible then how does one go about it.
Thanks and regards,
Alphonse Ogulla
Upgrading xserver to version 4.2.1 did the trick.
Thanx.
--
Alphonse Ogulla
Nairobi, Kenya
-
University of Nairobi Mail Services
"You can't afford to stay offline"
http://mail.uonbi.ac.ke/
--
To UNSUBSCRIBE, email to [EMAIL PRO
by default
without using a desktop manager like gdm? Actually, I love KDE but arts has
issues with my sound card - Aureal Vortex au8220 and therefore want to kick
start some other wm.
Thanks and regards
--
Alphonse Ogulla
Nairobi, Kenya
---
he problem. Are there any APIs in Linux for
programming the modem/serial port or is making low level i/o system calls the
only way out?
Grateful for any guidance on the best way to proceed.
Thanks and regards,
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
e
paragraph. Java is conspicuouly not mentioned. I construe that to mean Java
is so much lacking in useful qualities to serve any practical purpose.
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
s absolutely no need to make
any changes to the files /etc/chatscripts/provider and
/etc/ppd/peers/provider. The only additional configuration setting that was
required was to add a route to the remote network in /etc/ppp/ip-up.d/.
$ man pppconfig
> Thanks for any help.
Wish you luck.
--
On Wednesday 27 August 2003 12:02, Alphonse Ogulla wrote:
> My connection to the net is via a proxy server. It also appears port 6667
> on the same machine is blocked. Just wondering, is it possible to use ircii
> chat client from behind a squid proxy? Is there such a thing as irc ov
My connection to the net is via a proxy server. It also appears port 6667 on
the same machine is blocked. Just wondering, is it possible to use ircii chat
client from behind a squid proxy? Is there such a thing as irc over http?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to
On Tuesday 26 August 2003 14:56, Joris Huizer wrote:
> --- Alphonse Ogulla <[EMAIL PROTECTED]> wrote:
> > Hi all,
> > Just compiled kernel 2.4.21 but cannot boot it
> > despite creating the initrd
> > image and respective links in / to files in /boot.
> > Th
follows:-
atlas:/usr/src/linux# make-kpkg --initrd clean kernel_image
and also tried
atlas:/usr/src/linux# make-kpkg clean binary
Where could I be going wrong?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Cont
lib/modules/2.4.21
Added the following lines in lilo.conf before running lilo.
.
image=/vmlinuz-2.4.21 initrd=/initrd.img-2.4.21
label=2.4.21
root=/dev/hda1
read-only
Grateful for any assistance in resolving this difficulty.
--
Alphonse Ogulla
Nairobi, Kenya
--
second case, probably it is as a result of running update-modules
script after I installed a BT878 tv/fm card. Any solutions to my worries?
p.s. running woody.
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Cont
This one troubled me quite a alot - possible bug.
Inclusion of the line "DefaultDepth 24" in XF86Config-4 under Section
"Screen" solved the problem. Can now experience the total beauty of KDE 3.1
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTE
On Wednesday 20 August 2003 14:34, Johann Koenig wrote:
> On Wed, 20 Aug 2003 13:49:01 +0300
>
> Alphonse Ogulla <[EMAIL PROTECTED]> wrote:
> > How do I get ls to list directory contents with color without passing
> > the --color option everytime?
>
> Edit your ~/.
On Wednesday 20 August 2003 11:47, Shaul Karl wrote:
> On Tue, Aug 19, 2003 at 02:54:24PM +0300, Alphonse Ogulla wrote:
> > Just configured ppp and established a connection using pon. ifconfig ppp0
> > shows device ppp0 is up and running but with no indication of the
> > nego
How do I get ls to list directory contents with color without passing the
--color option everytime?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Just configured ppp and established a connection using pon. ifconfig ppp0
shows device ppp0 is up and running but with no indication of the negotiated
bandwidth. How can I establish the speed in Kbps at which I'm connected?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, ema
69 matches
Mail list logo
