Hi all, First problem; X runs on my machine pretty well but crashes moments later (as a result of a "fatal server lockup") on switching to a virtual console with the Ctrl+Alt+Fn keystroke. My system specs are as follows:-
Machine: Dell Optiplex GX10 Operating System: Debian GNU/Linux 3.0r1 "woody" Kernel 2.4.21 X -version: XFree86 version 4.1.0.1 (protocol version 11, revision 0) Video card: Onboard intel 810E The full server log is appended to the end of this message for your perusal. A similar installation on an equivalent machine but with an ATI Mach64 GB graphics card does not suffer from this problem. A little bit of tweaking XF86Config-4 like negating the UseFBDev option did not help much. Any solutions? Second problem, issuing the command startx, fires up KDE 3.1.3 by default. How do I set some other light weight window manager like fvwm to run by default without using a desktop manager like gdm? Actually, I love KDE but arts has issues with my sound card - Aureal Vortex au8220 and therefore want to kick start some other wm. Thanks and regards -- Alphonse Ogulla Nairobi, Kenya ----------------------------X server output----------------------------- hostname 2.08 warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 6 16:32:15 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Dell M570" (**) | |-->Device "Intel 810 Graphics Adaptor" (**) |-->Input Device "Generic Keyboard" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "uk" (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(0:1:0) Intel i810e rev 3, Mem @ 0xf8000000/26, 0xff000000/19 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815 (--) Chipset i810e found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (**) I810(0): Depth 24, (--) framebuffer bpp 24 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE DDC supported (II) I810(0): Manufacturer: DEL Model: 3319 Serial#: 810365272 (II) I810(0): Year: 1999 Week: 15 (II) I810(0): EDID Version: 1.1 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) I810(0): Sync: Separate (II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 (II) I810(0): Gamma: 2.28 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595 (II) I810(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311 (II) I810(0): Supported VESA Video Modes: (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported Future Video Modes: (II) I810(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) I810(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) I810(0): #3: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 28.3 MHz Image Size: 267 x 200 mm (II) I810(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0 (II) I810(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 449 v_border: 0 (II) I810(0): Serial No: 22795G0M1X49 (II) I810(0): Monitor name: DELL 828FI (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 2550 MHz (--) I810(0): Chipset: "i810e" (--) I810(0): Linear framebuffer at 0xF8000000 (--) I810(0): IO registers at addr 0xFF000000 (**) I810(0): Will alloc AGP framebuffer: 8192 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): Dell M570: Using hsync range of 30.00-60.00 kHz (II) I810(0): Dell M570: Using vrefresh range of 50.00-160.00 Hz (II) I810(0): Clock range: 12.00 to 136.00 MHz (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "1152x864" (hsync out of range) (II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (hsync out of range) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (++) I810(0): DPI set to (100, 100) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (==) Depth 24 pixmap format is 32 bpp (==) I810(0): Write-combining range (0xf8000000,0x4000000) (II) I810(0): Setting dot clock to 78.9 MHz [ 0x15 0x5 0x20 ] [ 23 7 2 ] (II) I810(0): chose watermark 0x22215000: (tab.freq 78.8) (II) I810(0): Adding 512 scanlines for pixmap caching (II) I810(0): Allocated Scratch Memory (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (**) I810(0): DPMS enabled (==) I810(0): Direct rendering disabled (WW) I810(0): Option "UseFBDev" is not used PEXExtensionInit: Couldn't open default PEX font file Roman_M (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Configured Mouse: Protocol: "PS/2" (**) Configured Mouse: Core Pointer (==) Configured Mouse: Buttons: 3 (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Generic Mouse: Protocol: "ImPS/2" (**) Generic Mouse: always reports core events (EE) xf86OpenSerial: Cannot open device /dev/input/mice No such device. (EE) Generic Mouse: cannot open input device (EE) PreInit failed for input device "Generic Mouse" (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) The XKEYBOARD keymap compiler (xkbcomp) reports: > Error: Can't find file "uk" for symbols include > Exiting > Abandoning symbols file "default" Errors from xkbcomp are not fatal to the X server (II) I810(0): Setting dot clock to 78.9 MHz [ 0x15 0x5 0x20 ] [ 23 7 2 ] (II) I810(0): chose watermark 0x22215000: (tab.freq 78.8) pgetbl_ctl: 0xbaf0001 pgetbl_err: 0x0 ipeir: 0 iphdr: 0 LP ring tail: 8 head: 0 len: 0 start 0 eir: 0 esr: 0 emr: 3d instdone: ff7b instpm: 0 memmode: 4 instps: 0 hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0 space: 65520 wanted 65528 Fatal server error: lockup When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] xinit: connection to X server lost. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
