Hi All,
How do I tell gcc to use the debug version of glibc ?
I installed libc6-dbg but I just can't find out how to direct gcc to use
the debug version of the libraries. I searched gcc's manual and googled
around but couldn't find out what certainly should be a trivial command
line option.
Paul
Thanks.
i'll try move to a newer kernel to solve this issue.
Regards,
MC
Almut Behrens wrote:
On Thu, Jun 30, 2005 at 08:55:23PM +0200, Marco Calviani wrote:
..., but what is an OOM Killer?
OOM = out of memory.
The OOM killer is responsible for killing processes when the system
Jessica Kong wrote:
> Hello. I found your e-mail on a website, and I hope you could help me. I
> downloaded the torrent file and have it saved. But when I tried to open
> it, it either say it could not open and I should try to install it again
> or that Windows Media player does not support the fil
Hello All,
I have been experimenting with Wine and it has been a pretty smooth road
till I planned to install Yahoo Messenger 6.0 in Wine. It was written on
the winhq.com database that YM6.0 was able to run under wine. My Wine
installation is an independent one, i.e. it does not use the actual
Win
hi ya marty
On Fri, 1 Jul 2005, Marty wrote:
> Alvin Oga wrote:
...
> >> Warning: /dev/hda is not on the first disk
> >
> > if yoou can boot from /dev/hda ... lilo is working
> > - pull out the scsi disk to make sure you are booting off /dev/hda
>
> This requires the user to to be physic
cheap oem soft shipping worldwide
http://zwubmy.ip4flz0txaipf10.mitigatorji.com
To freely bloom - that is my definition of success.
Alea Iacta est... (the dice is cast)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECT
I have an HP PSC 2110 working locally with foomatic and CUPS back end.
When I try to print remotely the CUPS web interface returns with:
"Print file was not accepted (client-error-bad-request)!"
I find these entries in /var/log/cups/error_log:
E [01/Jul/2005:00:13:09 -0400] print_job: No file!?
On Thursday June 30 2005 11:18 am, Hal Vaughan wrote:
> Interesting. We have had the same cable company in Richmond, VA
> since the 1980s (maybe even the late 1970s), but it's been bought,
> merged, etc. At one point it was Time Warner, MediaOne, and others
> I can't remember. I've had cable si
Which is better ? Why ? I need some information before chose one of
them . Thank you !
---
Cao Van Khanh
On Thu, Jun 30, 2005 at 09:33:16PM +0200, Geert Uytterhoeven wrote:
> On Thu, 30 Jun 2005, Lance Tagliapietra wrote:
> > In any case, I decided to go and attempt the upgrade, and have run into
> > the following problem now when attempting to use apt-get or dpkg or
> > aptitude:
> >
> > dpkg: par
Apparently, _Bill Marcum_, on 30/06/05 18:13,typed:
> On Thu, Jun 30, 2005 at 04:35:57PM -0400, H. S. wrote:
>
>>Hi,
>>
>>I am trying to make xmms play streams from websites and cannot get mp3
>>streams to work. From this page:
>>http://dir.xiph.org/index.php
>>
>>I have tried Ogg streams on xmms
Alvin Oga wrote:
On Thu, 30 Jun 2005, Marty wrote:
Whenever I try to install lilo to an IDE drive other than the one
one which I booted, and the later drive is SCSI, I get the following
warning message from LILO:
Warning: /dev/hda is not on the first disk
if yoou can boot from /dev/hda ...
On Thu, Jun 30, 2005 at 08:56:35AM +0200, Marco Calviani wrote:
> Hi,
> i'm currently running Debian sid with a custum 2.6.10 kernel. Whenever
> i run, for example, azureus bittorrent client for more that (nearly) 1
> hour my system exits from every program i was running under X and
> restarts
Greetings:
I'm tryiing to get 3d acceleration working on my IBM R40 laptop running Sarge
(3.1). I'm attempting to follow the instructions at
http://dri.freedesktop.org/wiki/DriTroubleshooting.
It says to do "dmesg | grep drm" and if it displays nothing, then "compile
agpgart into your kernel
On Tue, Jun 28, 2005 at 01:04:08PM +0200, Tim Ruehsen wrote:
> Hi,
>
> a few days before packet odbcinst1 has been replaced by odbcinst1debian1.
> In this process 'apt-get dist-upgrade' removed the packet libmyodbc. Of
> course, my apps using MySQL via ODBC do not work any more.
>
> Trying to 'a
On Wed, Jun 29, 2005 at 09:25:19AM +0100, Maurice O'Regan wrote:
> What mods need to be made to apt sources.listto request a module
> from 3.1 'unstable' ?
>
> maurice
Hi Maurice,
first you need to have 'sid' or 'unstable' lines in your source list.
so copy a 'stable'/'testing' line and rep
On Wed, Jun 29, 2005 at 10:37:21AM +0100, Anthony Campbell wrote:
> I found that wajig disappeared here after an update to unstable a couple
> of days ago and attempts to reintall it are greeted with the message
> that it has unmet dependencies and I should file a bug report. However,
> bug reporti
On Thu, 30 Jun 2005, Marty wrote:
> Whenever I try to install lilo to an IDE drive other than the one
> one which I booted, and the later drive is SCSI, I get the following
> warning message from LILO:
>
> Warning: /dev/hda is not on the first disk
if yoou can boot from /dev/hda ... lilo is wo
Almut Behrens wrote:
On Thu, Jun 30, 2005 at 04:29:50PM -0500, Colin Ingram wrote:
Lets say, I'm at work and I start a remote session for an interactive
program, like octave. Then I go home with and my remote terminal
session and the octave program are still running at work. Is there a
w
Whenever I try to install lilo to an IDE drive other than the one
one which I booted, and the later drive is SCSI, I get the following
warning message from LILO:
Warning: /dev/hda is not on the first disk
(e.g., if the target partition is on /dev/hda)
LILO documentation explains this warning as
When i use apt-get to upgrade my debian ,some softwares' configuration can't
be completed.It outputs as follows.
"ldconfig: /usr/lib/libstdc++-libc6.1-1.so.2.desktop is not an ELF file - it
has the wrong magic bytes at the start."
What's the problem?
--
To UNSUBSCRIBE, email to [EMA
Carl Fink([EMAIL PROTECTED]) is reported to have said:
> On Wed, Jun 29, 2005 at 10:53:16PM -0400, Wayne Topa wrote:
>
> > mysqldump -A > backup-file.sql (on main server)
> >
> > mysql database < backup-file.sql (on backup server)
> >
> > man mysqldunp
>
> EXACTLY what I needed. You're a li
On Thu, Jun 30, 2005 at 08:55:23PM +0200, Marco Calviani wrote:
> ..., but what is an OOM Killer?
OOM = out of memory.
The OOM killer is responsible for killing processes when the system is
running out of virtual memory (so the system itself will "stay alive").
(In your case it hit the X serve
Hi Bill:
I'm not sure why I could not install xplanet with just apt-get install
xplanet. I assume I need a specific deb listing, but I don't know it. I
didn't try the build-dep command. I'm real new at this - maybe someone will
point me to the apt-get right way to install xplanet.
Thanks,
Jamie
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello all,
I am wondering if anyone out there has created a script that runs from
cron that will move email from one folder to another. What I would like
to do is this: I have publicly accessible folders that all imap users
use called isSpam and notS
On Thursday 30 Jun 2005 23:55, Paulo M C Aragão wrote:
> I'm not sure if I understood you. Forgive my ignorance and please correct
> me:
> 1. There's a pam module that sets limits for a shell environment
> 2. These limits are hardcoded but can be changed via
>/etc/security/limits.conf
Yep :)
On Thu, Jun 30, 2005 at 04:04:11PM -0500, James C. Hall, MD wrote:
> Hello All:
>
> I couldn't just apt-get xplanet, unfortunately. Is there a way to 'fix' my X
> windows so that the appropriate includes are where they should be ? (I'm
> guessing /usr/include/X11).
>
Why can't you apt-get xplanet
On Thu, Jun 30, 2005 at 04:35:57PM -0400, H. S. wrote:
>
> Hi,
>
> I am trying to make xmms play streams from websites and cannot get mp3
> streams to work. From this page:
> http://dir.xiph.org/index.php
>
> I have tried Ogg streams on xmms and they work. The MP3 ones do not.
> While trying to
Adam Fabian wrote:
> I have Debian installed on my xbox. It's Xebian 1.01, or something like
> that. As nearly as I can tell, it's exactly the same as woody except
> that the kernel is a 2.4 kernel with xbox patches, and a backported
> version of XFree86 4.3.0, and some customized configuration f
Lee Braiden wrote on Jun, 30:
> I think the defaults are just from the same pam module that includes that
> file
> as an example of what you can change :)
I'm not sure if I understood you. Forgive my ignorance and please correct me:
1. There's a pam module that sets limits for a shell environm
unsubscribe
I have Debian installed on my xbox. It's Xebian 1.01, or something like
that. As nearly as I can tell, it's exactly the same as woody except
that the kernel is a 2.4 kernel with xbox patches, and a backported
version of XFree86 4.3.0, and some customized configuration files.
xbox:/# cat /etc/deb
On Thursday 30 Jun 2005 23:37, Paulo M C Aragão wrote:
> Lee Braiden wrote on Jun, 30:
> Just looked at the file again and noticed that all entries are commented
> out (start with #). So the defaults must be coming from somewhere else.
> Any ideas ?
I think the defaults are just from the same pam
I was trying to learn how to use the standalone info reader, following
its sort of tutorial and it aborted with 'segmentation fault'. This
should reproduce the error:
$ info info
h
n
n
n
]
]
[
Should I file a bug report ?
Thanks
Paulo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subj
> This reminds me of the problems I had setting up a server recently
> which had the dreaded Promise FastTrak100 interface on the
> motherboard.
Wow. On woody it works _fine_.
So sarge is finally here to kick off my fakeraid card? (purchased as
"true" hardware raid) No very good news. At least I
Lee Braiden wrote on Jun, 30:
> > Does anybody know where the defaults for ulimit are set ?
> > I couldn't find anything in /etc.
>
> /etc/security/limits.conf
Just looked at the file again and noticed that all entries are commented
out (start with #). So the defaults must be coming from somewhe
Lee Braiden wrote on Jun, 30:
> > Does anybody know where the defaults for ulimit are set ?
> > I couldn't find anything in /etc.
>
> /etc/security/limits.conf
Thanks, Lee. That's why 'grep -r ulimit /etc' couldn't find anything.
Paulo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a su
Thanks Martin for the reply. I thought it might be an uninstalled dev
package. I couldn't find the deb to allow the apt-get to work. I was able to
apt-get gsat and it works great.
Thanks for the hints.
Jamie
-Original Message-
From: Martin Dickopp [mailto:[EMAIL PROTECTED]
Sent: Thursda
On Thursday 30 Jun 2005 22:29, Colin Ingram wrote:
> Lets say, I'm at work and I start a remote session for an interactive
> program, like octave. Then I go home with and my remote terminal
> session and the octave program are still running at work. Is there a
> way for me to take control of that
On Thu, Jun 30, 2005 at 04:29:50PM -0500, Colin Ingram wrote:
> Lets say, I'm at work and I start a remote session for an interactive
> program, like octave. Then I go home with and my remote terminal
> session and the octave program are still running at work. Is there a
> way for me to take c
Lets say, I'm at work and I start a remote session for an interactive
program, like octave. Then I go home with and my remote terminal
session and the octave program are still running at work. Is there a
way for me to take control of that terminal and interact with the
running octave program?
Steve Block wrote:
Please
stop or take your comments to slashdot, where they belong.
Steve, you're right : this comment should belong to Slashdot.
I know this mailing list is much more made for technical purpose.
However, this is the technic that is bethreated by software patents.
I'am not
"James C. Hall, MD" <[EMAIL PROTECTED]> writes:
> At the point I run make, it errors out complaining that several X11
> includes are not found. [...] After going through my system a bit, he
> felt that several files were missing from my X Windows setup.
Install the package(s) which contain(s) the
Hello All:
I'm new to Debian and Linux in general but I have a functioning Sarge
machine at my office that I enjoy. One of my avocations is ham radio and,
specifically, satellites. I have been able to get Predict and gsat working
nicely. I have however run into problems getting xplanet to work. At
Carlos Rodrigues wrote:
> Ugo Bellavance wrote:
>
>> Carlos Rodrigues wrote:
>>
>>> So, I have Debian running inside VMware, and the NIC is detected as a
>>> AMD PCnet (module pcnet32). I installed vmware-tools and would like to
>>> know how to me Debian use the "vmxnet" driver instead.
>>>
>>> Ho
On Wednesday 29 June 2005 11:46 pm, Roberto C. Sanchez wrote:
> On Wed, Jun 29, 2005 at 11:39:03PM -0400, Rick Pasotto wrote:
> > I'm confused by the sarge installer. I have a single 250g hard drive
> > that I would like to manage entirely with lvm. The installer wants to
> > partition the drive *b
On Thu, Jun 30, 2005 at 10:25:47PM +0200, Guillaume TESSIER wrote:
Kent West wrote:
Guillaume TESSIER wrote:
My little sister could register on a web site.
and
If tomorrow my job is to migrate Linux plateforms onto windows, then
i'll feel like and will soon be unemployed.
Guillaume TESSIER wrote:
> Kent West wrote:
>
>> Guillaume TESSIER wrote:
>>
>
> There is a huge misinformation campaign to make deputies think software
> patents are necessary for innovation.
> Many people are mooving. Like writing letters to their deputies and to
> newspapers.
>
> The more peo
On Thu, Jun 30, 2005 at 12:42:09PM -0500, Ian wrote:
Hello, I am running Debian Sarge on my new server. I installed apache2 and the
required php4 packs along with mysql4. I can get php running, but the php
doesn't seem to be compatible with mysql4. Can you please help me solve my
problem?
Ch
On Thursday 30 June 2005 06:09 am, Eugen Wintersberger wrote:
> Hi there
> I have a problem with slapd using Kerberos V (GSSAPI) authentification
> on Debian 3.1 Sarge. The Kerberos configuration seems to be ok since
> cyrus imap daemon uses it without any problems.
>
> I also added the appropriat
I'm experiencing some trouble with my DSL setup.
Every time after reboot my routing table is using my ppp0 P-t-P address
instead of its inet address.
$ ifconfig ppp0
ppp0 Link encap:Point-to-Point Protocol
inet addr:168.100.249.107 P-t-P:168.100.250.1
Mask:255.255.255.255
Hi,
I am trying to make xmms play streams from websites and cannot get mp3
streams to work. From this page:
http://dir.xiph.org/index.php
I have tried Ogg streams on xmms and they work. The MP3 ones do not.
While trying to play an MP3 stream (.m3u file?), xmms reports "Couldn't
connect to host:
Ugo Bellavance wrote:
Carlos Rodrigues wrote:
So, I have Debian running inside VMware, and the NIC is detected as a
AMD PCnet (module pcnet32). I installed vmware-tools and would like to
know how to me Debian use the "vmxnet" driver instead.
How is the right way to change which module is loade
Hallo,
I have written a more elegant script. I have attached it (sorry) to this
message and can be saved in the directory /etc/ppp/ip-up.d
It uses a key (and password) together with the command ntpdc to change
the configuration of the ntp daemon.
If you enter the command "ntpdc -n -p", you
Hi all,
I was playing around with Fudforum and added some entrys and then decided to
"reset" the app to get rid of test enterys by (probebly stupidly)
uninstalling Fudforum and reinstalling it via the eGroupware setup. And now
it's broken. When loged in as admin I click on the Fudforum all I get is
Kent West wrote:
Guillaume TESSIER wrote:
My little sister could register on a web site.
and
If tomorrow my job is to migrate Linux plateforms onto windows, then
i'll feel like and will soon be unemployed.
Realizing that different cultures have different concepts of "f
On Thu, Jun 30, 2005 at 10:05:01PM +0200, Almut Behrens wrote:
> On Thu, Jun 30, 2005 at 09:37:26PM +0700, Prabu Subroto wrote:
> >
> > I work at a workstation and my workstation is associated in a LAN. My
> > internet connection is only through http proxy server. So if I want to
> > go to interne
Michael Ott <[EMAIL PROTECTED]> wrote:
>Hello Ralph!
>
>> I just installed eGroupware (on Sarge via aptitude) and when I run the
>> Check Installation script it checks for installed components, one of
>> witch is GD, and it fails to see GD?
>> Here's the error I get:
>>
>> [Warning] Checking for
Paulo M C Aragão wrote:
> Does anybody know where the defaults for ulimit are set ?
>
> I couldn't find anything in /etc.
>
> Thanks
> Paulo
>
>
Probably /etc/security/limits.conf
--
Ugo
-> Please don't send a copy of your reply by e-mail. I read the list.
-> Please avoid top-posting, long
On Thu, Jun 30, 2005 at 09:37:26PM +0700, Prabu Subroto wrote:
>
> I work at a workstation and my workstation is associated in a LAN. My
> internet connection is only through http proxy server. So if I want to
> go to internet, I have to set my internet browser for the ip number and
> the port num
s. keeling wrote:
RMS seems to have disagreements with just about everyone but himself.
RMS more than any public figure I know of, seems to generate these ad
hominem attacks against himself. He's also the most intelligent and
relentlessly logical writer and speaker of any public figure I know
David Nicholls wrote:
> I've just downloaded the latest netinst iso of debian.
>
> I usually do not select any packages to install when prompted, and
> although the installer still insists on installing a large number of
> unneeded files (dictionarys, nano etc) I usually press contol-C to
> cancel
On Thursday 30 Jun 2005 20:41, Paulo M C Aragão wrote:
> Does anybody know where the defaults for ulimit are set ?
> I couldn't find anything in /etc.
/etc/security/limits.conf
--
Lee.
Please do not CC replies directly to me. I'll read them on the list.
On Thursday 30 Jun 2005 19:43, Martin Dickopp wrote:
> However, a mismatch does *not* necessarily indicate a "bug in the
> filesystem driver." It can also occur if directories are created or
> deleted between the time the hard link count is obtained and the time
> the number of subdirectories is ob
On Thu, 30 Jun 2005, Lance Tagliapietra wrote:
> In any case, I decided to go and attempt the upgrade, and have run into
> the following problem now when attempting to use apt-get or dpkg or
> aptitude:
>
> dpkg: parse error, in file `/var/lib/dpkg/status' near line 41026
> package `libstring-a
Guillaume TESSIER wrote:
> My little sister could register on a web site.
and
> If tomorrow my job is to migrate Linux plateforms onto windows, then
> i'll feel like and will soon be unemployed.
Realizing that different cultures have different concepts of "foul
language", this is just a remi
Does anybody know where the defaults for ulimit are set ?
I couldn't find anything in /etc.
Thanks
Paulo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello Ralph!
> I just installed eGroupware (on Sarge via aptitude) and when I run the
> Check Installation script it checks for installed components, one of
> witch is GD, and it fails to see GD?
> Here's the error I get:
>
> [Warning] Checking for GD support...: False
> Your PHP installation do
On Thu, Jun 30, 2005 at 12:03:09PM -0700, [EMAIL PROTECTED] wrote:
>
> The man page lists only a few parameters for the
> .videogen configuration file. All others are only
> command line parameters. That is a little awkward.
My .vodeogen configuration file is:
mode 800x600#
Also, I don't know if this is a factor or not, but most of the channels I want
to record are digital cable (that includes BBC America, Sci-Fi and manyothers). I don't know if Myth TV or any other homebrew system handles
digital cable signals.
Many HDTV capable tuners can also handle digital cable.
Thanks,
now i have the file (/var/log/boot) that i was searching for.
Regards,
MC
Nikita V. Youshchenko wrote:
Hi,
i would like to have all the information from the boot process, that
i've checked are not present in *dmesg*. From other distribution i was
used to boot.log that i've seen
On 30 Jun 2005, at 4:21 PM, Jonathan Opperman wrote:
On 30 Jun 2005, at 1:30 PM, Jonathan Opperman wrote:
On 17 Jun 2005, at 12:24 AM, Wolfgang Schulze-Zachau wrote:
Hi all,
Is there any further development planned regarding the adaptec
1210SA adapter ?
I would be seriously interested
Adam Hardy wrote:
I tried to register myself on the German anti-software-patent site,
but failed - I can't remember why,
Fine Adam.
Your "tried to register on the anti-software-patent site, but failed".
You're really that kind of person that make software patents would
happen. My little
vineyard saker <[EMAIL PROTECTED]> writes:
> 1) during my install I was not connected to the Internet (I had
> ordered the 14 Debian CDs from budgetlinuxcds) and I therefore did not
> configure my network card. Now I would like to connect my computer to
> the rest of my computers on a home networ
On Fri, Jul 01, 2005 at 12:26:37AM +0700, Khanh Cao Van wrote:
> I've add many rule on route table but when restart my PC , they're
> gone . How to keep them remain ?
Add them in the /etc/network/interfaces file under the appropriate
device, e.g., eth0. Check the man page for interfaces(5) for th
Hi all,
I just installed eGroupware (on Sarge via aptitude) and when I run the
Check Installation script it checks for installed components, one of
witch is GD, and it fails to see GD?
Here's the error I get:
[Warning] Checking for GD support...: False
Your PHP installation does not have appropr
On Thursday 30 June 2005 10:34 am, Paul Johnson wrote:
> On Wednesday June 29 2005 11:10 pm, Hal Vaughan wrote:
> > One other consideration is if your service provider provides any
> > type of service. While I'm planning on eventually building a Myth
> > TV box, I have Comcast, and they provide a
On Thu, 2005-06-30 at 17:07 +0200, Paolo Pantaleo wrote:
> I need to compare two files, in a quite accurate way, i tried vimdiff,
> but it is quite hard to learn.
> Does someone know about a program that makes the same of vimdiff, but
> is easier, and possibly for gnome/kde?
xxdiff
(occasionally c
Guillaume TESSIER wrote:
> Adam Hardy wrote:
>
>>
>> I tried to register myself on the German anti-software-patent site,
>> but failed - I can't remember why,
>
>
> Fine Adam.
>
> Your "tried to register on the anti-software-patent site, but failed".
>
> You're really that kind of person that
Ralph Crongeyer wrote:
>Hi all,
>
>I just installed Gallery the PHP online photo gallery app, (on Sarge via
>aptitude) and when I run the setup script it checks for installed
>components, one of witch is GD, and it fails to see GD? Yet, dpkg -l
>php4-gd shows that it is installed?
>
>How do I get
On Thu, 2005-06-30 at 21:37 +0700, Prabu Subroto wrote:
> Dear my friends...
>
> I work at a workstation and my workstation is associated in a LAN. My
> internet connection is only through http proxy server. So if I want to
> go to internet, I have to set my internet browser for the ip number and
Hello Paul,
Wed, 29 Jun 2005 23:16:41 +0200
> Use the videogen ...
Thanks for telling me about videogen. I spent an
hour or so with it.
The man page lists only a few parameters for the
.videogen configuration file. All others are only
command line parameters. That is a little awkward.
I am
On (30/06/05 16:39), Roman Muñoz wrote:
> Hi,
>
> I'm trying to do a fresh sarge install on an Asus A7V mboard, but my
> stripping raid (20265) is not working. I see only two separated disks.
>
> I see modules pdc202xx_old & pdc202xx_new on sarge install, both with
> 2.4 and 2.6 kernels, but I ca
Hi Nikita,
Thanks for the hint, but what is an OOM Killer?
Regards,
MC
Nikita V. Youshchenko wrote:
Hi,
i'm currently running Debian sid with a custum 2.6.10 kernel. Whenever
i run, for example, azureus bittorrent client for more that (nearly) 1
hour my system exits from every pro
On Thu, 2005-06-30 at 11:10 +0100, Bryan Jackson wrote:
> Hello everyone.
>
> I have a Debian Sarge box that was working fine until Sarge went stable.
> Aptitude has started acting very strange, in fact apt in general
> seems broken. The symptoms are as follows.
>
> 1. I have had no upgrades
"Nikita V. Youshchenko" <[EMAIL PROTECTED]> writes:
>> Just got the following warning:
>>
>> find: WARNING: Hard link count is wrong for /proc: this may be a bug in
>> your filesystem driver. Automatically turning on find's -noleaf option.
>> Earlier results may have failed to include directori
Hi folks. Successfully installed the 2.6.8 kernel on my Sun Ultra 5.
However, when I go to boot with the new kernel the keyboard mapping is ALL
WRONG on my Sun Type 5 keyboard -- the letter keys either type numbers or do
not type at all and the number keys when Num Lock is is type letters.
H
On 6/30/05, Simon <[EMAIL PROTECTED]> wrote:
> iptables -F
> iptables -A INPUT -i lo -j ACCEPT
> iptables -N SPOOF
> iptables -A SPOOF -i eth1 -j SPOOF
I think that's wrong. You're appending a rule to the SPOOF table which
specifies that all packets from eth1 are to be jumped to the SPOOF
chain..
>
> my ISP disconnects me once a day, so that I won't keep a quasi-static IP
> I don't pay for. Now, pppd reconnects swiftly, but ntp doesn't seem to
> like this anyway. Soon after the dis-/reconnect I get this:
> Feb 9 13:15:01 zwerg ntpd[4732]: sendto(192.53.103.104): Invalid argument
> Feb 9
On Wed, Jun 29, 2005 at 04:51:18PM +0200, Hannes Mayer wrote:
> I've been wondering the past few days why there are no updates via
> "apt-get update/upgrade" (I have the correct entries in
> sources.list!). A few days ago I was reading at heise.de
> (http://www.heise.de/newsticker/meldung/61076) th
Sorry for the multiple post major Windoze problems. Thats why I run
Debian on all of my home machines :-)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I am here to ask this question because I found some people in the local
forum have the same problem with the mailscanner. So I think maybe
somebody has successful experience of installing mailscanner in Debian box.
Thanks
Ugo Bellavance wrote:
>Cheng-Han Tsai wrote:
>
>
>>Dear all,
>>
>>Rece
Hello everyone.
I have a Debian Sarge box that was working fine until Sarge went stable.
Aptitude has started acting very strange, in fact apt in general
seems broken. The symptoms are as follows.
1. I have had no upgrades when when I run "aptitude update, aptitude
upgrade" since sarge went s
Do you use acrobat 7 or 5? I had similar problems with acrobat 5 but
with version 7 the problem dissapeared.
On 6/30/05, roberto <[EMAIL PROTECTED]> wrote:
> Hi, using acrobat reader i encounter the following problem:
>
> ~:$ acroread
> Warning: locale not supported by C library, locale unchanged
Hi.
I'd be very grateful of some help here. Done lots of googling etc...
My old HD is failing (IBM "DeathStar") so I've bought a new one. It's SATA.
I wanted to use lvm2 to make resizing easier. I read about it, and found
that having / on lvm2 made it harder to get it to boot. I found this
Hi there
I have a problem with slapd using Kerberos V (GSSAPI) authentification
on Debian 3.1 Sarge. The Kerberos configuration seems to be ok since
cyrus imap daemon uses it without any problems.
I also added the appropriate principals to my Kerberos database and to
the krb5.keytab file:
ldap
On 2005-06-30, Mitja Podreka wrote:
> I have ADSL connection which I share over a router and Apache server
> installed on my laptop running Debian Sarge. Before I started to share
> ADSL connection I sometimes used the server to share bigger files with
> my friends. I told them the URL of the fi
Hi,
roberto wrote:
Hi, using acrobat reader i encounter the following problem:
~:$ acroread
Warning: locale not supported by C library, locale unchanged
then acrobat reader starts correctly but i can not use any of the shortcuts
like Ctrl+O, Ctrl+W
and so on, so useful on a laptop, not to use
1 - 100 of 157 matches
Mail list logo
