On 20.01.2013 00:01, Wojciech Zabołotny wrote:
Hi,
I've performed tests suggested by Jonathan in my system.
1st test:
I have started the system, connected the FLASH disk to the USB 3.0 port
and suspended it by "echo disk > /sys/power/state".
Then I pressed the POWER button to switch the syste
W dniu 11.02.2012 09:09, Sergei Golovan pisze:
> Hi!
>
> On Sat, Feb 4, 2012 at 11:29 PM, wzab wrote:
>>
>> I was editing the attached file w8.wings. I tried to remove the whole
>> an one end of the created "pipe" using the connect and weld operations.
>> However as soon as the hole disappears du
Package: msgpack-python
Version: 0.1.10-1
Severity: important
Dear Maintainer,
I've tried to use msgpack to pack environment as a big dictionary, which
resulted in packing of keys only:
>>> import msgpack
>>> import os
>>> e=os.environ
>>> print e
{'DBUS_SESSION_BUS_ADDRESS':
'unix:abstract=/tm
If the diagnosis, that the problem is associated with sharing of IRQ 18
between SMBus controller and XHCI controller, and with incorrect
handling of shared interrupt by i2c-smbus.c driver is true,
then it could also explain the bug:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=623004
Wojte
I've just stated, that the problem with "[drm:intel_prepare_page_flip]
*ERROR* Prepared flip multiple times " filling the logs has disappeared
after one of last system upgrades.
It seems that it was the user space problem (or it has been worked
around or masked in the user space), as it does not ap
I have deleted the /etc/adjtime in the affected machine and rebooted it.
After that it boots correctly, without a delay caused by the "future
superblock write time".
However I don't understand what was the real cause of the problem...
--
Wojtek
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ.
The strange thing, is that the problem occurs only in one machine.
Both machines run debian/testing. Both were updated at the same time.
The only difference I'm aware of is the video adapter - Integrated Intel
and Nvidia in the machine where the problem appeared. The integrated
Intel only in the ma
Dear Mattia,
Yes, I'm the same person. I don't know why CERN mailer does not accept
your address.
However, some time ago the same happened to my University e-mail - I
couldn't send e-mail to any CERN address.
Regarding the bug - the problem has also disappeared in the affected
system.
I'm a
I've forgotten to add, that the commands used in my config file work
perfectly, when entered in the fluidsynth shell.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Subject: python-relatorio: Missing dependences: python-yaml and python-pycha
Package: python-relatorio
Version: 0.5.1-4
Severity: normal
*** Please type your report below this line ***
When trying to use the examples provided by python-relatorio, I had to
install additional packages: python-yaml a
I've found that some problems related to xserver-xorg-video-intel may be
cured by adding "modeset=0" when loading i915 module.
I've tried that, but it didn't cure the problem.
X windows crashed again a few minutes ago :-(.
Now at the end of the Xorg.0.log file I've found the following information:
Package: octplot
Version: 0.4.0-7
Severity: normal
When I try to activate the octplot I get the following message:
octave:1> toggle_octplot
error: Octplot was compiled for a different version of Octave
error: evaluating if command near line 40, column 3
error: evaluating if command near line 28,
Package: grub-pc
Version: 1.97~beta3-1
Justification: renders package unusable
Severity: grave
*** Please type your report below this line ***
After I've issued the command "upgrade-from-grub-legacy", the system stopped
booting, when I press enter or select any line in the menu (if I let the
syste
W dniu 10.09.2010 10:00, Andreas Beckmann pisze:
On Thursday, 28. January 2010 22:24:47 wzabo...@elektron.elka.pw.edu.pl wrote:
Package: nvidia-glx-legacy-96xx
Version: 96.43.14-2
When trying to use python-visual bball.py demo on a machine with
nvidia adapter requiring the nvidia-glx
W dniu 11.09.2010 01:55, Andreas Beckmann pisze:
On 2010-09-10 20:55, wzabo...@elektron.elka.pw.edu.pl wrote:
I have downloaded:
nvidia-kernel-legacy-96xx-source_96.43.18-1_i386.deb
...
Finally I have updated whole system. After that I have rebooted the
machine and run the
Package: iceweasel
Version: 3.5.11-2
Severity: important
*** Please type your report below this line ***
When watching the video file (namely from site:
http://polskanarowery.sport.pl/msrowery/1,105126,8368344,Zupelnie_niepotrzebne_wynalazki_rowerowe__Ciezej_.html
) the iceweasel crashed generati
Package: openoffice.org-writer
Version: 1:3.1.1-16
Justification: renders package unusable
Severity: grave
*** Please type your report below this line ***
After lest upgrade (25.02 or 26.02) OpenOffice stopped to work on all my
systems.
When I try to run e.g. the oowriter, it displays the empty "O
Package: python-matplotlib
Version: 0.99.1.2-2
Severity: important
*** Please type your report below this line ***
When I try to use the Subplot module from matplotlib.axes, I get the
following
error:
$ python
Python 2.5.4 (r254:67916, Nov 19 2009, 19:46:21)
[GCC 4.3.4] on linux2
Type "help", "co
When I try to run "ipython -pylab", I get the following error:
$ ipython -pylab
Your PyGtk has set_interactive(), so you can use the
more stable single-threaded Gtk mode.
See https://bugs.launchpad.net/ipython/+bug/270856
Traceback (most recent call last):
File "/usr/bin/ipython", line 28, in
> Hello,
>
> On Fri, Jan 15, 2010 at 19:09, wzabo...@elektron.elka.pw.edu.pl
> wrote:
>
>>
>> Traceback (most recent call last):
>> File "", line 1, in
>> File "/usr/lib/pymodules/python2.5/matplotlib/axes.py", line 17, in
>
Sandro Tosi pisze:
>
>> It seems that Python on my machine does not look for modules
>> in this directory.
>> I don't know if it is a problem specific to my machine, or common
>> for all up to date debian/testing systems...
>>
>
> your system. try to reinstall python-tz, maybe also removing+pu
W dniu 14.09.2010 18:55, Mike Hommey pisze:
On Tue, Sep 14, 2010 at 06:27:25PM +0200, wzabo...@elektron.elka.pw.edu.pl
wrote:
Package: iceweasel
Version: 3.5.11-2
Severity: important
*** Please type your report below this line ***
When watching the video file (namely from site:
http
W dniu 16.09.2010 21:10, Adrian Knoth pisze:
On Thu, Sep 16, 2010 at 06:15:11AM +, Debian Bug Tracking System wrote:
Hi!
Bug #596868 [iceweasel] Subject: iceweasel: Iceweasel crashes when
playing video files
How do you bridge between iceweasel and jackd? Given that jackd is not
Package: python-wxgtk2.6
Version: 2.6.3.2.2-4+b1
Severity: important
After upgrade the python-wxgtk2.6 didn't install.
The following message was displayed:
Setting up python-wxgtk2.6 (2.6.3.2.2-4+b1) ...
file does not exist: /usr/lib/python2.6/dist-packages/wxversion.py
pycentral: pycentral pkgin
Package: nvidia-glx-legacy-96xx
Version: 96.43.14-2
Severity: important
*** Please type your report below this line ***
When trying to use python-visual bball.py demo on a machine with
nvidia adapter requiring the nvidia-glx-legacy-96xx driver,
an error is reported (I attach the compressed error
Some people reported that the described bug may be related to libboost,
however even after the latest upgrade visual python generates segfault
(I attach two error logs - the first one for python 2.5 and the second
one for Python 2.6).
vpython_bug_2.5.txt.gz
Description: GNU Zip compressed da
Package: iceweasel
Version: 3.5.9-3
Severity: normal
*** Please type your report below this line ***
When browsing Internet (namely www.gazeta.pl) with Iceweasel in my
RT-patched system with jack audio (however with the jackd temporarily
disabled),
I have experienced the random crash of Iceweas
Package: simulavr
Version: 0.1.2.2-6.1
Severity: wishlist
The significantly newer version of the simulavr (0.1.2.6)
is available at http://mirrors.zerg.biz/nongnu/simulavr/
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (1001, 'testing'), (50, 'unstable')
A
Package: scribus-ng
Version: 1.3.5.dfsg+svn20091216-3+b2
Severity: wishlist
*** Please type your report below this line ***
According to the info available at http://www.scribus.net/ , the new
version 1.3.9 has been released on 30th Nov. 2010.
-- System Information:
Debian Release: squeeze/sid
As a quick workaround I have switched to the xserver-xorg-video-vesa.
What's interesting, I didn't experienced significant drop of video
performance
(at least using glxgears to measure it ;-) ).
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubsc
I have similar problem in my two machines - one laptop and one desktop.
In fact after the problem appears, screen gets black and I'm not able to
ssh into these machines to get any logs.
I have reported more details to lkml:
http://lkml.org/lkml/2010/10/26/466
http://lkml.org/lkml/2010/10/27/60
As
The Submitter of this bug report mentioned that it may be "resurrected"
bug #593432.
In fact the 593432 has been "fixed" by either disabling (in config file)
or blacklisting KMS for some chipsets.
Now the authors of xserver-xorg-video-intel made KMS mandatory,
so all users of the problematic ch
I ve set two options in my kernel configuration:
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
Now the system boots correctly with KMS switched on.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact list
Yes, it was a kernel configuration related bug (it was submitted by
someone alse as bug 601558)
The problem id that when KMS is switched on (at least in
Intel chipsets) the support for framebuffer console must be also
switched on.
I ve set two options in my kernel configuration:
CONFIG_FRAMEBUFF
Package: qemu
Version: 0.12.5+dfsg-2
Severity: wishlist
QEMU 0.12.x has dropped support for kqemu. This has left users of system
with CPU without hardware virtualization support without possibility
to run QEMU with acceleration.
As it seems, there is no possibility to have kqemu support reintrodu
Package: python-visual
Version: 1:5.12-1.1
Severity: important
*** Please type your report below this line ***
When I try to run even the simplest "bouncing ball" demo provided in
python-visual on the AMD K7 system with NVidia graphics card,
process fails and the following bug report is generated.
I've just stated, that the bug which I've reported may be the same as
552567. The common fact is the use of NVIDIA graphics adapter with
proprietary driver...
Maybe the 555974 is also the same problem? I have sent additional
details about 555974, but after one update (I don't remember when) the
sy
The coff-avr support is needed for testing of AVR code with VMLAB (
http://www.amctools.com/vmlab.htm ).
Unfortunately, the version 2.20-2 , which is available in testing still
lacks this support.
I have to use the avr-objcopy extracted from the old 2.18 version of
avr-binutils to generate coff fr
I have faced the similar bug in one of my debian/testing systems.
Looking for the solution, I've found the following:
https://bugs.launchpad.net/python/+bug/457688
where the similar bug in Ubuntu is described.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
I had similar problem with HP/Compaq nx7300. Booting linux (even
different versions of kernel) didn't cause any trouble.
Booting Windows XP Home (installed automatically by os-prober) caused
grub to hang immediately after displaying "Welcome to GRUB!"
Maybe either grub-ps, or os-prober should dete
Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
*** Please type your report below this line ***
Below is the error generated for another user, which uses English locales.
Therefore the error report is in English only:
E [19/Nov/2009:21:39:42 +0100] [Job 1162] Job stopped due to
Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
*** Please type your report below this line ***
When I tried to print something on the printer configured with the
old PPD, I get the following errors in the /var/log/cups/error_log :
E [19/Nov/2009:21:24:21 +0100] [Job 1158] Job
Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
*** Please type your report below this line ***
I have found the reason why the old workaround stopped to work.
The problematic line in the error_log is:
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Starting renderer with command: gs
Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
*** Please type your report below this line ***
I have found the reason why the old workaround has stopped working.
The file currently available at:
http://www.linuxprinting.org/ppd-o-matic.cgi?driver=hl1250&printer=Brother-HL-143
When I've longer used the lmms and jack, the following messages have
accumulated in the console where I've run lmms.
The lmms was still operational and prodoced sound transmitted through jack.
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01'
Package: dssi
Severity: wishlist
*** Please type your report below this line ***
I've just stated that the version of dssi in my system is 0.9.1-3
while there is the newer 1.0.0 version available at
http://dssi.sourceforge.net
-- System Information:
Debian Release: squeeze/sid
APT prefers testi
I've downloaded the sources of the newest Guitarix:
http://sourceforge.net/projects/guitarix/files/guitarix/guitarix-0.05.1-1/guitarix-0.05.1-1.tar.bz2/download
and unpacked it into the temporary directory.
In the README file I have found the following description:
[...]
Debian
To build a Deb
Package: alsa-source
Version: 1.0.21+dfsg-2
Severity: important
*** Please type your report below this line ***
When I try to use the "HR timer" as a MIDI sequencer timer in the
Rosegarden (http://www.rosegardenmusic.com) application, the system
freezes. Another people also reported similar probl
Package: streamtuner
Version: 0.99.99-15
Severity: normal
*** Please type your report below this line ***
Whenever I select the strem and press "tune in", the streamtuner segfaults.
I have changed the default configuration to use audacious instead of xmms.
When starting from gdb I was able to get
Package: freehdl
Version: 0.0.7-1
Severity: important
*** Please type your report below this line ***
When I try to compile the VHDL file (e.g. the rec_tb.vhd) I get the
following results:
$ ./gvhdl rec_tb.vhd --libieee
gvhdl: FreeHDL root path is '/usr'.
gvhdl: executing '/usr/bin/freehdl-
I have simply performed in a temporary directory:
$ apt-get source python visual
$ cd python-visual-5.12
$ fakeroot dpkg-buildpackage
$ cd ..
$ su -c " dpkg -i python-visual_5.12-1.1_i386.deb "
And problem disappeared.
However the dependency of cvisualmodule.so has changed to:
libboost_python-py
The source of the problem is obviously the implementation of the
getJavaVersion function (in Utils.Java).
It does not accept Java 11 that reports its version as a two character
string "11":
/**
* Returns the main version number of the current JRE, e.g.
* 1.4 for version 1.4.2_03
Hi,
I have checked, that other terminals available in MATE like
* xterm
* mate-terminal
* xfce4-terminal
are not affected by the above problem. Only konsole windows freeze when
I press backspace in the empty commandline.
Regards,
Wojtek
--
Wojciech M Zabolotny, PhD
Institute of Electron
W dniu 08.10.2017 o 14:53, Jonas Smedegaard pisze:
> Quoting wzabo...@elektron.elka.pw.edu.pl (2017-10-08 14:38:01)
>> W dniu 08.10.2017 o 14:13, Jonas Smedegaard pisze:
>>> Quoting Wojciech Zabołotny (2017-10-08 13:34:16)
>>>> When I start the jack server, and t
W dniu 08.10.2017 o 14:13, Jonas Smedegaard pisze:
> Hi Wojciech,
>
> First of all, thanks for reporting this!
>
> Quoting Wojciech Zabołotny (2017-10-08 13:34:16)
>> When I start the jack server, and then ardour5, it does not start.
>> The "top" shows that ardour5 uses one CPU core in 100%.
>> Whe
I have repeated my tests, starting my Debian/testing system with the
4.13.0-2 kernel, and the same problem occured.
Then I have started the system with yet older 4.12.0-2 kernel
( uname -a returns: Linux wzab 4.12.0-2-amd64 #1 SMP Debian 4.12.13-1
(2017-09-19) x86_64 GNU/Linux )
Now the vhci_hcd d
Package: usbip
Version: 2.0+4.14.13-1
Severity: important
Dear Maintainer,
When I try to access the USB devices exported with usbip from another
machine,
even before I try to access the remote usbip server I gaet the strange
error:
# modprobe vhci-hcd
# usbip port
libusbip: error: port number ex
Please remove that report or at least join it with 891036.
I have resubmitted the report, as it seemed that 891036 was rejected.
--
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology
I have installed the kernel 4.15 from Debian/sid
Now I get the following messages in kernel log after "modprobe vhci-hcd":
[ 234.776615] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 234.776622] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus
number 5
[ 234.776649] vhci_hcd: c
I have also updated the "usbip" package to version
usbip_2.0+4.15.4-1_amd64.deb
However, the problem with the number of ports still exists:
# usbip port
libusbip: error: port number exceeds 128
usbip: error: open vhci_driver
usbip: error: list imported devices
--
Wojciech M Zabolotny, PhD
Inst
On the system where I have installed the 4.15.xxx kernel and usbip from
Debian/sid, I get the following results from "usbip --debug port":
[...]
usbip: debug: names.c:428:[parse] line 18068 subclass fe:02 IRDA Bridge
usbip: debug: names.c:428:[parse] line 18069 subclass fe:03 Test and
Measurement
In fact I don't understand how the vhci_hcd is supposed to work.
The constants are defined as follows:
https://elixir.bootlin.com/linux/v4.15.4/source/drivers/usb/usbip/vhci.h#L75
/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
#ifdef CONFIG_USBIP_VHCI_HC_PORTS
#define
I have recompiled the kernel with modifed settings:
In the debian/config/config I have changed:
from
CONFIG_USBIP_VHCI_NR_HCS=8
to
CONFIG_USBIP_VHCI_NR_HCS=4
After installing the modified kernel I was able to get my remote device
attached and it worked correctly.
Probably the problem could be al
Hi,
I have found that the
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891036 is not the only
one related to misconfiguration of the usbip driver and tools.
A few weeks ago the similar bug
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=878866 was discovered.
It seems that the configuration
64 matches
Mail list logo
