h due to the gcc5 transition. Also xv video output broke, and I
got lots of messages like "shm: no space left on device", when /dev/shm
was barely used. Googling those messages finally lead me to openjdk, and
after upgrading to version 8 all those problems are gone.
Best regards,
Christian
PL-2
"LGPL-2.rar: RAR archive data, v4b, flags: Commented,".
http://www.rarlab.com/technote.htm seems to describe the format.
Best regards,
Christian Ohm
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'te
recognize the files instead of showing "Couldn't recognize the archive
format", which it also does for non-archive files.
Best regards,
Christian Ohm
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'te
Package: kid3-core
Version: 3.1.2-1
Severity: normal
Dear Maintainer,
The kid3-core manpage is missing (was present in 3.1.1-2), to which the
kid3/kid3-cli... manpages refer.
Best regards,
Christian Ohm
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (990
could include that last patch in the Debian
package, it applies nicely on top of the 4.8.10 source.
Best regards,
Christian Ohm
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental
Package: calligra
Version: 1:2.6.3-2
Severity: minor
Dear Maintainer,
Updating calligra the changelog says there's a new component
calligraauthor, but it doesn't get installed automatically (not sure if
that's an oversight or intentional).
Best regards,
Christian Ohm
-- Sys
ys now without problems, so it looks fixed.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
ed for and this
cause hard crashes for some users, from Xiong Huang." which seems to be
the cause of the broken network, and also might be a fix for the hangs
in 3.7.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
ponding linux-tools
package is available (for perf), but depending on how annoying 3.7 gets
I might update earlier this time.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
with only a few changes, so it seems important.
Best regards,
Christian Ohm
-- Package-specific info:
** Version:
Linux version 3.7-trunk-amd64 (debian-ker...@lists.debian.org) (gcc version
4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.7.8-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz
in Warzone 2100 mods, though it can
potentially affect any program using physfs to access zip files. I don't
know how serious the other fixed bugs were, but since we print a warning
when physfs 2.0.2 is used, it would be nice if physfs could be updated
to 2.0.3 despite the freeze.
Best regards
ldmailfile(self.mailbox_selected)
TypeError: write_oldmailfile() takes exactly 1 argument (2 given)
It gets new mails, but fails before deleting them from the server.
4.27.0-1 works ok.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT poli
And I just noticed that even though apt-get claimed to upgrade
libc-ares2, it actually didn't, only after running dist-upgrade again.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
s[pkg], order)
KeyError: 'libc-ares2'
I think there was an unconfigured package again (dvdrip).
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'expe
at shouldn't be a problem).
Best regards,
Christian Ohm
-- Package-specific info:
** Version:
Linux version 3.4-trunk-amd64 (Debian 3.4.1-1~experimental.1)
(debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP
Wed Jun 6 10:34:53 CEST 2012
** Command line:
BOOT
er-imcontext-0.1-0_0.1.4-2+b2 (from +b1).
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-am
def) show is not a compound
ALSA lib conf.c:1686:(snd_config_load1) _toplevel_:24:26:Unexpected char
ALSA lib conf.c:3406:(config_file_open) /usr/share/alsa/pulse-alsa.conf may be
old or corrupted: consider to remove or fix it
whenever a program uses plughw:1 (#661095 I guess).
Best regards,
icult, and so obfuscates that this actually doesn't indicate
anything), and no tooltip, so once the timer is on, there's no way to
see how much time is left anymore. (Running in stalonetray, not in kde,
if that matters.)
Best regards,
Christian Ohm
-- System Information:
Debian Relea
"?" as pattern in mc doesn't work,
"??" selects 者, "???" selects 例.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimenta
c507c271 /usr/lib/mc/extfs.d/uzip
http://http.us.debian.org/debian/pool/main/m/mc/mc_4.8.1-1_amd64.deb
contains the zero:
3eb2d2056fba39083f308181d044bf3f ./usr/lib/mc/extfs.d/uzip
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
ed purging and reinstalling mc, but
that also didn't help. Comparing /usr/lib/mc/extfs.d/uzip with that from
the old version gave a difference, if I set my $op_has_zipinfo = 1; in
the current file instead of 0 which it is now, things work again.
Best regards,
Christian Ohm
--
To UNSUBS
help there.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/4 CPU cores)
Package: mc
Version: 3:4.8.1-1
Severity: normal
Dear Maintainer,
Since the update, browsing zip files shows just an empty folder. Other
archive types work as far as I tested, but no zip file. Removing the old
migrated config didn't help.
Best regards,
Christian Ohm
-- System Inform
es it.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LAN
Package: soundconverter
Version: 1.5.4-1
Followup-For: Bug #651451
Dear Maintainer,
This seems to be a bug in the gstreamer plugins:
https://bugzilla.redhat.com/show_bug.cgi?id=722667
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500,
-Sintel-FLAC.zip,
converted with soundconverter -b has some judder at 0:40-0:42. The
converted file for reference: http://mediafire.com/?cbugsgr3l2clnuv
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500
verywhere (also internal pages like the addons). New
profile doesn't help, and confirmed on IRC to happen elsewhere.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (
ixed.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: fontmatrix
Followup-For: Bug #579314
Here's a patch to support .ttc files, seems to work here. Feel free to
include and/or upstream it.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'),
- volume control via scrollwheel is less sensitive, 5% instead of 3% (or
2%?) before
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Archite
As a workaround, removing /usr/share/alsa/pulse{,-alsa}.conf helps,
breaking the packaging though.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
air I didn't change any
defaults, and couldn't reproduce it now either. Also, looking at the
changelog it seems unlikely that I had an earlier version installed.
Don't know what happened there, sorry, feel free to close this.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email t
oving ~/.config/subtitleeditor/ helped, so there should probably be a
note or something on upgrading.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental
On Saturday, 1 October 2011 at 20:10, Christian Ohm wrote:
> On Saturday, 1 October 2011 at 11:39, Sjoerd Simons wrote:
> > A solution for you should be to use device=plughw:1 to play back on your
> > second device.
>
> Unfortunately that fails with
>
> [AO
o such file or directory
Failed to initialize audio driver 'alsa:device=plugwh=1'
Could not open/initialize audio device -> no sound.
Audio: no sound
("device=plughw=1" is correct, since mplayer uses : to separate options)
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, e
device work again.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores
Package: poppler-utils
Version: 0.16.7-2
Severity: normal
Hello,
Looking at the output of pdftohtml -c, the files for each page have the
following structure (stripped down):
I.e. a div starts in the header, but is closed in the body.
Best regards,
Christian Ohm
-- System
quot; is a quite generic name (I have 175 files with that name on my
system) it would be nice if this is changed to e.g. ./.perfconfig.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testi
clude/Colors.nsh', which is also in
package nsis 2.46-2
Trying another dist-upgrade told me to run "apt-get -f install", which fixed it.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable&
lders are empty (INFO and INSTALL look ok).
It could be a result of the recent perl transition, at least I didn't notice
the problem before that.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable&
Package: tig
Version: 0.17-1
Severity: normal
Hello,
In older versions, using e.g. ":33" to go to a line number worked, but now tig
says "Unable to parse '33' as a line number".
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT
Package: gcc-mingw-w64
Version: 4.5.3-1
Severity: wishlist
Hello,
In contrast to the gcc-mingw32 package, gcc-mingw-x64 doesn't contain
libiberty, so programs using that (e.g. Warzone 2100) fail to compile with it.
Would be nice if you could include it.
Best regards,
Christian Ohm
-- S
Package: unetbootin
Version: 549-1
Severity: normal
Hello,
Installing the Dr.Web LiveCD with unetbootin on a USB stick doesn't boot, says
something like "Cannot find boot device". The same iso burnt onto a CD works on
the same system.
Best regards,
Christian Ohm
-- System Info
, maybe whatever package created it should remove it
again until it actually works?
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
if
that is usually needed/installed these days.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Tuesday, 12 April 2011 at 4:07, Marco d'Itri wrote:
> Then looks like you will have to find out why, because so far it is
> working for everybody else.
> Do you have a run? Is it a tmpfs? Does it contain anything?
I have to admit that I am not very keen on experimenting much with my main
syste
mouse. Downgrading udev / libudev /
libgudev to 166-1 made everything work again.
Possibly this is the same problem as in #621036, except that is marked as being
fixed in 167-2, which didn't work here.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT pr
):
subprocess installed post-installation script returned error exit status 127
configured to not write apport reports
Errors were encountered while processing:
i2c-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
Best regards,
Christian Ohm
-- System
s for
packages that don't support all python versions.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel:
Hello,
As mentioned in #619096, this problem is indeed caused by python-qscintilla2,
and a local rebuild of that package fixes it.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
mc or emacs running in the xterm.
Well, I added a "XTerm.omitTranslation: fullscreen" as well, and then it works.
That should probably be default when the fullscreen switching is disabled
though.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ..
Package: gcc-doc
Version: 5:3
Severity: normal
Hello,
As the subject says, gcc-doc is still depending on the old docs.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'),
eally inputlirc, which should default to the new socket
location now.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Wednesday, 9 March 2011 at 0:46, Stefan Lippers-Hollmann wrote:
> On Tuesday 08 March 2011, Christian Ohm wrote:
> > Package: liblircclient0
> > Version: 0.9.0~pre1-1
> > Severity: critical
> > Justification: breaks unrelated software
> >
> > Hello,
>
m js0: Success
mplayer gives its usual output when there's no lirc device:
mplayer: could not connect to socket
Just downgrading to 0.8.3-5 makes it work again.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'u
ution.
Best regards,
Christian Ohm
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.37-trunk-amd64 (SMP w/4 CPU cores)
Locale: LAN
Package: libqt3-headers
Version: 3:3.3.8b-7+b1
Severity: normal
Hello,
This still happens, and it is quite annoying when -Werror builds suddenly fail
after a qt3 update (that overwrites my local fix). Could you please include
this patch?
Best regards,
Christian Ohm
-- System Information
Shouldn't that bug rather be reassigned to libglc0 than closed? I mean, I don't
care, my local version works now. Just seems kind of strange to me.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubs
gards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8,
system with the wrong
libglew.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Tuesday, 15 June 2010 at 19:02, Joost Yervante Damad wrote:
> Could you try and see if it is an issue with glewmx 1.5.3-3 or glewmsx
> 1.5.3-2 ?
libglewmx1.5 1.5.3-3 also works, just 1.5.4-1 breaks things...
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subjec
aphics driver (though I've tried
7.7.1-3 and 7.8.1-2 of libgl1-mesa-dri, and it segfaults with both).
Hope that helps,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Is this a request for the game to support 320x240? That won't happen soon. If
it's just that it doesn't work well in 320x240, that has long been fixed, by
making the game reject any resolution below 640x480 (for which the current gui
is hardcoded).
--
To UNSUBSCRIBE, email to debian-bugs-dist-r
This is a problem in the current libglewmx1.5, which doesn't work well with
libglc it seems. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=585757
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debia
owngrading libglewmx1.5 to 1.5.3-2 makes things work again.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel:
, except this isn't from upstream either (and
that isn't mentioned anywhere), so for a program to compile on other systems,
that cannot be used (and on other systems, autoconf checks fail when using only
the very convenient PKG_CHECK_MODULES).
Best regards,
Christian Ohm
-- System I
Package: gcalctool
Version: 5.30.0-1
Severity: normal
Hello,
Older gcalctool versions had buttons to switch number display between
hex/dec/oct/bin in the interface. The current version hides that in the
preferences dialog, which makes it much harder to use.
Best regards,
Christian Ohm
en
released yet.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-2-amd64 (SMP w/2 CPU cores)
L
had QEMU_AUDIO_DRV=sdl set - I guess that came from a time when
I was using qemu and the alsa output didn't work right. Setting it to alsa
doesn't crash, and the sound works.
Thanks for the fast answer. I guess you don't need any more info then?
Best regards,
Christian Ohm
--
T
st regards,
Christian Ohm
PS: Two gdb backtraces, one full:
GNU gdb (GDB) 7.0.1-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO
(and
needs scanview.css as well, I think).
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trun
led it with only --enable-multibyte, and that compiles and runs.
Needs -u to output UTF8 though, maybe that should be default.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
?
That's the wrong one. If I put the libiberty.a from mingw32 into gcc-mingw32's
/usr/i586-mingw32msvc/lib dir it works.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: gcc-mingw32
Version: 4.4.2-1
Severity: wishlist
Hello,
The old mingw32 package includes libiberty, could you include it in this
package as well?
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable&#x
Package: gcc-4.4
Version: 4.4.2-5
Severity: normal
Hello,
Since the default gcc in unstable is now 4.4 I wanted to clean up the old 4.3 a
bit and discovered that the gcc-4.4-doc package is missing, though it is
suggested by gcc-4.4.
Best regards,
Christian Ohm
-- System Information:
Debian
Hello,
Sorry for the late feedback, except the one hangup I wrote about that version
works perfectly, I didn't notice any other irregularities.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". T
On Wednesday, 18 November 2009 at 7:16, Jonathan Nieder wrote:
> Christian Ohm wrote:
> > As the subject says, the exclude options to ls-files seem broken. For
> > example,
> > in a repo with PNG files, "git ls-files" obviously lists those, but "git
&
also doesn't help, putting the
pattern into a file and using -X also fails.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64
ibreak in quite some time, so I don't remember anything more
than is written in the bug report. If those symptoms don't appear anymore, I
guess it has been fixed.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of &
st speculation, I haven't found a way to provoke
the segfault at will, and during normal use it is completely unpredictable how
long it takes gmpc to crash, can be minutes or days.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT polic
ly in Debian? The listed homepage ebview.sf.net and the sf
project page look untouched since 0.3.6.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental
s - Decoding Character Sets -
Default torrent encoding when selection required to UTF-8, Azureus still shows
question marks - looks to me like it just uses the first filename it finds,
while qbittorrent and transmission use the UTF-8 name.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE,
integrated and should be
> uploaded soon (4.2.0.8-2).
A short test of that version shows the first problem indeed fixed, but the
second is not (where Japanese characters are decoded into question marks, that
still happens with the second non-working example torrent).
Best regards,
Christian Ohm
Package: konversation
Version: 1.2~alpha6-1
Severity: normal
As the subject says. The menu entry and ctrl-r both do nothing.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'exper
y in situations when you
don't always want to watch the VM), the window is brought to the current
desktop (and sometimes grabs the focus if it lands under the mouse cursor).
This doesn't happen with the GTK frontend.
Best regards,
Christian Ohm
-- System Information:
Debian Release:
Hello,
Playing around with Virtualbox 3.0.4 works fine for now, whatever the problem
was seems to be fixed (haven't tried any intermediate versions).
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe
Hello,
The filename decoding is still not fixed in azureus 4.2.0.4-1. I'll forward you
the mail with the broken torrents, if you think it's ok you can attach them to
the bugreport.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.
file those
settings work as expected.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'experimental'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.29.6
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Sunday, 19 July 2009 at 10:06, Debian Bug Tracking System wrote:
> Marking as fixed in 7.5 in experimental.
Actually this works in 7.4.4 as well.
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe&q
d doesn't find libiberty_pic.a).
How did I get this invalid package and apt-file information?
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
the status bar, and have an easily
accessible error log (one line per error that tells exactly what the problem
was) for previous errors for example. That would make finding problems much
easier.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers u
eed for that now :)
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
for you.
This config is all I need to get the segfault, on a current Debian unstable
system that never saw fvwm before. If you still need the coredump, I'll send it
tomorrow (it's on another machine).
Best regards,
Christian Ohm
--
To UNSUBSCRIBE, email to debian-bugs-dist-re
.c:657
man = (WinManager *) 0x21b46a0
width = 0
height = 1
i = 7
x = 80
y = 0
geometry_mask = 4331303
#5 0x00406243 in main (argc=8, argv=0x7fffcbef44a8) at
FvwmIconMan.c:304
i = 0
__PRETTY_FUNCTION__ = "main"
B
Package: fvwm
Version: 1:2.5.27.ds-3
Severity: important
Hello,
After upgrading fvwm to version 1:2.5.27ds-4 my FvwmIconMan didn't appear,
without any message in .xsession-errors. Downgrading to ...-3 fixed it.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeez
s "default" device. Since my
soundcard doesn't have a hardware mixer, the default device is configured to
use software volume control. When I use another device, I get playback at 100%,
regardless of my mixer settings. This makes the xine backend unusable for me.
Best regards,
Christian O
t; after trying ~10 titles
from the playlist. The files play in other programs, and with the xine backend.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'experimental'), (500, &#x
Package: vilistextum
Version: 2.6.9-1
Severity: wishlist
Hello,
It would be nice if you could enable the multibyte support of vilistextum, so
it supports UTF8.
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'uns
atus
Best regards,
Christian Ohm
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'experimental'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.29.4 (SMP w/2 CPU cores; PREEMPT)
Locale
1 - 100 of 203 matches
Mail list logo
