Bug#760442: installation-reports: Jessie installer hangs at 45% ‘starting partitioner’ on both desktop and Eee PC netbook

Package: installation-reports Severity: important Dear Maintainer, The installation went smoothly (including harddisk recognition) up to this point, when the PS command showed Parted running. There was no progress for hours and no harddisk or CD access. The portable computer uses one internal h

Bug#760348: [pkg-cinnamon] Bug#760348: cinnamon-control-center-data: Tries to install a file that belongs to another package.

Hi El Miércoles 3 Septiembre 2014 07:24 CEST, Martín Ferrari Ha escrito: > And so, now dpkg is stuck: > > Preparing to unpack .../cinnamon-control-center-data_2.2.11-2_all.deb ... > Unpacking cinnamon-control-center-data (2.2.11-2) over (2.2.10-3) ... > dpkg: error processing archive > /var/ca

Bug#760443: procmail: CVE-2014-3618: Heap-overflow in formail when processing specially-crafted email headers

Source: procmail Version: 3.22-19 Severity: grave Tags: security patch upstream Hi, the following vulnerability was published for procmail. CVE-2014-3618[0]: Heap-overflow in procmail's formail utility when processing specially-crafted email headers If you fix the vulnerability please also mak

Bug#760441: please add squirrel (U+1F43F) glyph

package: fonts-dkg-handwriting severity: wishlist Hi Daniel, thanks for sharing your very nice handwriting in a (re-)usable manner with the world! That's totally awesome! :) It would even be yet more awesome if you could add a glyph for a squirrel as described in the new 7.0 unicode standard,

Bug#749417: motif: Wrong declaration of function _XmEditResCheckMessages

Control: tags -1 -help (I should be able to provide the required help, hope that's ok.) Hi Graham, > Thank you for your bug report. I did have a look at this some time > ago and found more information in bug #747585. > I prepared the attached patch, but before I push the changes and send > upst

Bug#624343: Still an issue with amd64 linux kernel 3.2.60-1+deb7u3

I hit this yesterday in 64-bit system running amd64 kernel version 3.2.60-1+deb7u3. I had a RAID-1 array with two attached SATA disks with the other one nearing failure with non-zero reallocated sector count. This array serves as a physical volume for LVM, along with another similar array. On the L

Bug#758955: cycle: Please update to use wxpython3.0

On Sat, Aug 23, 2014 at 07:24:53PM +1200, Olly Betts wrote: > Source: cycle > Version: 0.3.1-9 > Severity: important > Tags: sid jessie > User: freewx-ma...@lists.alioth.debian.org > Usertags: wxpy3.0 > Control: block 755757 by -1 > > We're aiming to migrate the archive to using wxpython3.0 instea

Bug#760340: [Pkg-xfce-devel] Bug#760340: xfce4-battery-plugin: Only updates when I log in to xfce

Please keep the bug on CC:, this is not a support channel On jeu., 2014-09-04 at 00:55 -0500, Forrest Cahoon wrote: > It may be xfce4-power-manager. I'm referring to the icon that looks > like a > battery which has a picture of a power plug next to it when the > computer is > plugged in. > > I j

Bug#760440: transition: cfitsio

Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: transition Hi, I would like to do a transition for the CFITSIO library. Upstream finally decided to support shared libraries and to ensure the soname will change if the ABI changes. This will makes

Bug#760439: gconf2-common: error processing

Package: gconf2-common Version: 3.2.6-3 Severity: important Hi Sorry my bad English After last upgrade, seen: Setting up gconf2-common (3.2.6-3) ... : The Source directory is /usr/share/gconf : The State directory is /var/lib/ucf The hash file exists egrep [[:space:]]\/etc\/gconf\/2\/path$ /var

Bug#760438: gnome-control-center: Manual network address is used (if it was set), even if Auto(DHCP) is selected.

Package: gnome-control-center Version: 1:3.12.1-4+b1 Severity: normal Dear Maintainer, While trying to setup a router I found out that if a manual IP address is written at network settings and if Auto(DHCP) is selected, then the effective IP is the manual one and not the one from the DHCP server

Bug#760437: libvpx: FTBFS on x32: Assembler errors

Source: libvpx Version: 1.3.0-2.1 Severity: important Justification: FTBFS but built successfully before http://buildd.debian-ports.org/status/fetch.php?pkg=libvpx&arch=x32&ver=1.3.0-2.1&stamp=1409806077 : ... gcc -I/«PKGBUILDDIR»/vp8 -I/«PKGBUILDDIR»/vp8 -I/«PKGBUILDDIR»/vp9 -I/«PKGBUILDDIR»/v

Bug#751754: qemu-system-x86: update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults

04.09.2014 04:01, Michael Biebl wrote: > On Sun, 22 Jun 2014 18:23:58 +0400 Michael Tokarev wrote: >> And finally, this very initscript is not even needed on >> jessie anymore, because kernel past (iirc) 3.9 autoloads >> kvm modules. This script, basically, is only needed for >> old (wheezy) kern

Bug#760359: libssh2-1-dev: pkgconfig missing dependency on -lgpg-error

On Thu, Sep 4, 2014 at 3:05 AM, Guillem Jover wrote: > While it is true that this will fix the problem, it is fixing it in the > wrong place, because it is encoding a possibly internal implementation > detail in the depending packages. The proper fix would be to request > that libgcrypt gets a pk

Bug#759740: apt-cache-ng: user apt-cacher-ng already exists error when upgrading

Hallo, * Andrew Patterson [Wed, Sep 03 2014, 12:53:32PM]: > One possible complication I may be running into is that I am using > LDAP for user accounts with uid > 2000, which would fail if > apt-cacher-ng was trying to create a user in the range. But I think > the problem here is solely that the ac

Bug#688492: dput: please allow uploading .dak-commands files

On Sun, Sep 23, 2012 at 08:38:50AM +0200, Ansgar Burchardt wrote: > Package: dput > Version: 0.9.6.3 > Severity: wishlist > File: /usr/bin/dput > > Please allow dput to upload .dak-commands files. See [1] for more > details. > > Ansgar > > [1]

Bug#760422: openssh-server: systemd service does not automatically create /var/run/sshd

Ximin Luo writes: > When switching to systemd, the directory /var/run/sshd is not > automatically created, causing the resulting service to fail. > A workaround is to manually create the directory with the right > ownership, but I have not verified if this persists across restarts. > Please aut

Bug#756993: evince: Gedit has a similar UI, but has a quit button

Package: evince Version: 3.12.2-1 Followup-For: Bug #756993 Dear Maintainer, Gedit user interface is very similar to that of Evince but it has a visible close button on the title bar unlike Evince. -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'uns

Bug#760436: openjdk-7: FTBFS on x32: icedtea-sound build passes -m64 to gcc

Source: openjdk-7 Version: 7u65-2.5.2-2 Severity: important Justification: FTBFS but previously built successfully http://buildd.debian-ports.org/status/fetch.php?pkg=openjdk-7&arch=x32&ver=7u65-2.5.2-2&stamp=1409783934 : ... /usr/bin/make -C icedtea-sound make[1]: Entering directory '/«PKGBUILD

Bug#760431: byobu prevents inverted text from displaying and shows as italics instead

Hi John, Could you please provide $TERM inside and outside of byobu? I suspect this is an issue with tmux/screen; if inside byobu it is not screen-256color-bce, could you perhaps try setting it to that before running less? Sincerely, -Alex On Wed, Sep 3, 2014 at 11:25 PM, John Gruenenfelder wro

Bug#760435: libglib2.0-0: Missing characters in GTK apps

Source: libglib2.0-0 Version: 2.40.0-5 Severity: important Dear Maintainer, After the latest updates on Debian Jessie GTK apps loses some random characters. I upgraded yesterday and all was fine. Today I switched on my PC and it starts. I thought it might be KDE bug, but installing different desk

Bug#760434: amule crash, jam, cpu hog, memory hog after running some time

Package: amule Version: 2.3.1+git1a369e47-1 Severity: grave Dear Maintainer, after running some minutes (might be almost immediate) amule crashed, jams, consumes cpu power and allocates more and more memory. (before its killed) this happened after upgrade to 2.3.1+git1a369e47-1. older version wa

Bug#727245: abook bug

Package: abook Version: 0.6.0~pre2-3 Followup-For: Bug #727245 Dear Maintainer, I can confirm this bug. I have a macro built into my .muttrc: ## Use abook with Mutt set query_command = "abook --mutt-query '%s'" macro index a "|abook --add-email\n" 'add sender to abook' macro pager a "|abook --ad

Bug#760433: libav: FTBFS on x32: Invalid inline assembly

Source: libav Version: 6:11~beta1-2 Severity: important Justification: blocker for kde builds X-Debbugs-CC: Thorsten Glaser When I try building libav in an x32 schroot (without the build dependencies on frei0r, opencv, x264 which have also all failed to build on x32), I get this: ... /tmp/libav/

Bug#760432: pdns-backend-mysql: specified mysql.sql in README.Debian does not exist

Package: pdns-backend-mysql Version: 3.1-4.1_amd64 Severity: minor The /usr/share/doc/pdns-backend-mysql/README.Debian file states: "In /usr/share/doc/pdns-backend-mysql/ is the file mysql.sql. This contains a basic setup for PowerDNS." But this file is not included in the package and thus does

Bug#758954: drpython: Please update to use wxpython3.0

Control: tag -1 + fixed-upstream On Sat, Aug 23, 2014 at 07:24:26PM +1200, Olly Betts wrote: > We're aiming to migrate the archive to using wxpython3.0 instead of > wxwidgets2.8, and hope to drop wxwidgets2.8 before jessie is released. I noticed there are newer upstream releases of drpython which

Bug#760431: byobu prevents inverted text from displaying and shows as italics instead

Package: byobu Version: 5.77-1 Severity: normal Dear Maintainer, Sometime in the last several weeks (four to eight, I think), many programs run in a shell under byobu no longer correctly display inverted text. Instead, the text is displayed in an italics face. The easiest way to reproduce this

Bug#760430: libical: Error in timezone handling

Source: libical Version: 1.0-1 Severity: normal Dear Maintainer, * What led up to the situation? Add user to address book (evolution) with birthday on or befor 02.10.1949 (10/02/1949). * What exactly did you do (or not do) that was effective (or ineffective)? Add the user. Timezone Europa/Berl

Bug#699185: Updated x32 debdiff for nspr

Here's the debdiff for the updated nspr package I just uploaded to debian- ports/unreleased. -- Daniel Schepler diff -Nru nspr-4.10.7/debian/changelog nspr-4.10.7/debian/changelog --- nspr-4.10.7/debian/changelog 2014-08-23 16:25:30.0 -0700 +++ nspr-4.10.7/debian/changelog 2014-09-03 19:39

Bug#758952: python-enable: Patch for wxPython 3.0

Control: tags 758952 + patch Dear maintainer, The attached patch updates python-enable for wxWidgets 3.0. The package builds cleanly, but it seems to be a module without any scripts which use it, so I'm not easily able to test it. Please can you give it a go? Cheers, Olly diff -Nru python-

Bug#758953: python-chaco: Patch for wxPython 3.0

Control: tags 758953 + patch Dear maintainer, The attached patch update python-chaco for wxWidgets 3.0. The package builds cleanly, but it seems to be a module without any scripts which use it, so I'm not easily able to test it. Please can you give it a go? Cheers, Olly diff -Nru python-ch

Bug#699185: fixed upstream, but symbols need updating

On Sat, 22 Mar 2014 22:58:22 +0100 Adam Borowski wrote: > Hi! > > This bug has been fixed upstream, and the fix is included in what you > uploaded this Thursday. However, the package still doesn't build due > to the symbols file listing architectures by hand. > > A trivial patch attached. It l

Bug#760257: RFS: plowshare4/1.0.5-1 -- file sharing tools

tags 760257 - moreinfo thanks Hi Eriberto, Thanks for checking about the queue; it would be great to upload now since that won't cause any issues with respect to the queue. On 04/09/14 04:16, Eriberto Mota wrote: > I review your package. There are several Lintian messages > 'executable-not-elf-o

Bug#758972: Mojarra update 2.2.8

Hi Markus, I can take a look at your changes but not right now since I'm in vacation right now. I'll check this during the next week since I know this is a very pressing issue and the clock is ticking for the next release. Thanks for taking a look at this. Cheers, -- Miguel Landaeta, nomadium

Bug#757538: Patch to add do-othing -a

Tags: PATCH The attafhed patch adds a do-nothing -a option. As fsck.f2fs always tries automatically to fix problems. --- fsck/main.c |5 - 1 file changed, 4 insertions(+), 1 deletion(-) Index: f2fs-tools-1.3.0/fsck/main.c =

Bug#758950: djvusmooth: Please update to use wxpython3.0

On Wed, Sep 03, 2014 at 01:43:39PM +0200, Jakub Wilk wrote: > * Olly Betts , 2014-08-24, 03:53: > >I'm not sure why it doesn't just work (as > >wxPython/demo/TreeCtrl.py from the wxPython 3.0 sources does and > >the code is very similar) but adding a handler for EVT_RIGHT_CLICK > >which calls EditL

Bug#760428: grub2: FTBFS on x32: error: gcc-4.9 failed to produce assembly code

Source: grub2 Version: 2.02~beta2-11 Severity: important Justification: essential package for x32 grub2 failed to build on the x32 buildd: checking whether -fno-dwarf2-cfi-asm works... yes checking whether -fno-asynchronous-unwind-tables works... yes checking whether option -mcmodel=large works..

Bug#742031: openbabel: diff for NMU version 2.3.2+dfsg-1.4

I've uploaded an NMU for openbabel (versioned as 2.3.2+dfsg-1.4). It's the same patch I originally posted to this ticket, except rebased on top of the more recent NMUs. Cheers, Olly diff -Nru openbabel-2.3.2+dfsg/debian/changelog openbabel-2.3.2+dfsg/debian/changelog --- openbabel-2.3.2+dfsg/

Bug#751508: parallel: package building is not idempotent

Hi, Michele. On Sep 03 2014, Michele Orru` wrote: > ping. Thanks for the ping. I am ill and had to be an in-patient (as opposed to an out-patient) for the last few weeks. I want to resume work on parallel's packaging, but I would prefer if we exchanged patches via a git repository (e.g., you can

Bug#760359: libssh2-1-dev: pkgconfig missing dependency on -lgpg-error

Hi! On Wed, 2014-09-03 at 17:17:11 +0900, Junichi Uekawa wrote: > Package: libssh2-1-dev > Version: 1.4.3-3 > Severity: normal > /usr/lib/x86_64-linux-gnu/pkgconfig/libssh2.pc > has line: > Libs.private: -lgcrypt > > however, libgcrypt depends on libgpg-error, so static linking fails. > > This

Bug#760427: netdde: gets often stuck using pcnet driver

On Thu, Sep 04, 2014 at 02:26:00AM +0200, Gabriele Giacone wrote: > By switching card to e1000, it works fine, no hangs with heavy network > traffic so far. This is probably just pure luck. There are known issues unrelated to the driver in netdde, probably caused by the condition/mutex code which

Bug#754218: boot hangs forever on LSB job "raise network interfaces"

On 09/04/2014 04:29 AM, Michael Biebl wrote: > Could you please send me all files from /etc/network/ and > /etc/dhcp/ (as tarball). There are no custom files in /etc/network, do you really need them? % ls -R /etc/network /etc/network: if-down.d/ if-post-down.d/ if-pre-up.d/ if-up.d/ interfa

Bug#718803: Urgent Update

My late client made you a beneficiary in his will. After several failed attempts to reach you by post mail, I resulted to reaching you by email, i advise you contact me immediately. Barr. Mark Freedman

Bug#710855: Info received (gdk-pixbuf: missing icons (thunar), reportbug won't start anymore due to missing debian logo)

Workaround: The command to update the cache 'gdk-pixbuf-query-loaders > /usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache' will work after installing "libgdk-pixbuf2.0-dev". Regards MH Am 04.09.2014, 00:30 Uhr, schrieb Debian Bug Tracking System : Thank you for the add

Bug#757886: fontypython: diff for NMU version 0.4.4-1.1

Control: tags 757886 + pending Dear maintainer, I've upload an NMU for fontypython (versioned as 0.4.4-1.1). The only changes from the patch I attached before is that the bug number is now in the changelog, and the changelog entry date updated to today. Cheers, Olly diff -Nru fontypython-0.

Bug#758762: Please drop acpi-support from task-laptop

What about dropping the "acpi" package from "task-laptop"'s "Recommends" too? It's just a commandline utility that "Shows information from the /proc or the /sys filesystem, such as battery status or thermal information." Best wishes, Bob -- To UNSUBSCRIBE, email to debian-bugs-dist-requ..

Bug#760427: netdde: gets often stuck using pcnet driver

Package: netdde Version: 0.0.20121127-3+b1 Severity: normal Dear Maintainer, on a qemu VM with pcnet network card, network often gets stuck doing network traffic like dist-upgrade downloading packages. It gets working back by pkill'ing netdde. By switching card to e1000, it works fine, no hangs

Bug#754218: boot hangs forever on LSB job "raise network interfaces"

Am 04.09.2014 um 01:43 schrieb sergio: > > Today, after upgrading kde, sysvinit-core was replaced with systemd-sysv > 208-8. Reboot gives the same error. > Boot becomes normal after "auto" entries were committed out in > /etc/network/interfaces (except lo). Not workable file is attached. Could yo

Bug#754218: boot hangs forever on LSB job "raise network interfaces"

Today, after upgrading kde, sysvinit-core was replaced with systemd-sysv 208-8. Reboot gives the same error. Boot becomes normal after "auto" entries were committed out in /etc/network/interfaces (except lo). Not workable file is attached. -- sergio. # This file describes the network interface

Bug#760426: [systemd] Logs gone after moving to systemd

Am 04.09.2014 um 02:07 schrieb Vedran Furač: > Package: systemd > Severity: important > > Few days ago I noticed /var/log/syslog was empty. After some time I > found out that this is due to systemd. However, I wasn't warned that > replacing init system will silently break my logs, nor was this > m

Bug#760426: [systemd] Logs gone after moving to systemd

Package: systemd Severity: important Few days ago I noticed /var/log/syslog was empty. After some time I found out that this is due to systemd. However, I wasn't warned that replacing init system will silently break my logs, nor was this mentioned in documentation. By documentation I mean: - Pack

Bug#748737: [request-tracker-maintainers] Bug#748737: rt4-extension-assettracker: fails to upgrade from wheezy

On Tue, May 20, 2014 at 11:46:50AM +0200, Holger Levsen wrote: > during a test with piuparts I noticed your package fails to upgrade from > wheezy. It installed fine in wheezy, then the upgrade to jessie fails. > > From the attached log (scroll to the bottom...): ... > error encountered proces

Bug#751754: qemu-system-x86: update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults

On Sun, 22 Jun 2014 18:23:58 +0400 Michael Tokarev wrote: > And finally, this very initscript is not even needed on > jessie anymore, because kernel past (iirc) 3.9 autoloads > kvm modules. This script, basically, is only needed for > old (wheezy) kernel. Maybe I'll just remove it completely > f

Bug#760292: [request-tracker-maintainers] Bug#760292: rt4-clients: allow the rt client to modify the status of a ticket while commenting

Control: forwarded -1 Control: fixed-upstream On Tue, Sep 02, 2014 at 11:46:35AM -0400, Daniel Kahn Gillmor wrote: > A reasonable use case for rt is to comment on a ticket (or > "correspond", which is just a comment that is also sent to the ticket > requestor). In the web form for commenting, th

Bug#760425: uml-utilities: tun/tap permissions not set correctly on boot

Package: uml-utilities Version: 20070815-1.3 Severity: normal After boot, I have: # ls -l /dev/net/ total 0 crw-rw 1 root root 10, 200 Sep 3 16:47 tun Bringing the interface down and up again restores correct permissions (so that user "nikratio" has access): # ifdown tap0 # ifup tap0 Set

Bug#759056: dicompyler: Please update to use wxpython3.0

Hi Andreas, On Thu, Sep 04, 2014 at 12:26:39AM +0200, Andreas Tille wrote: > On Sun, Aug 24, 2014 at 12:19:35PM +1200, Olly Betts wrote: > > Source: dicompyler > > Version: 0.4.1-1-2 > > Severity: important > > Tags: sid jessie > > User: freewx-ma...@lists.alioth.debian.org > > Usertags: wxpy3.0 >

Bug#759560: missing license in debian/copyright

Hi! Please apply attached patch to Yate 5.4.0 or less. License files for WebRTC and iLBC will be installed in the docs directory and can be packaged from there. Regards, Paul On Thu Aug 28, 2014 16:44:53 Thorsten Alteholz wrote: > Package: yate > Version: 5.4.0-1-1 > Severity: serious > User

Bug#577788: dom0 kernels should suggest irqbalance

On Sun, 2014-08-31 at 03:10 +0100, Ian Campbell wrote: > (copying debian-kernel for reasons which will hopefully become obvious) > > On Mon, 8 Jul 2013 18:10:58 +0200 =?UTF-8?Q?Moritz_M=C3=BChlenhoff?= > wrote: > > In current Debian kernel there's no special Xen dom0 kernel image and > > depend

Bug#760424: Subject: netfilter-persistent: Running firewall before partitions mounted

Package: netfilter-persistent Version: 1.0.2 Severity: wishlist Dear Maintainer, I've found a small edge case that may affect a few users. I run a couple laptops with read-only root and /etc partitions. For them, I place files that I occasionally modify into /var/local/etc because it is mounted

Bug#760423: lighttpd: systemd service does not automatically create /var/run/lighttpd

Package: lighttpd Version: 1.4.35-3 Severity: important Dear Maintainer, When switching to systemd, the directory /var/run/lighttpd is not automatically created (and chown www-data), causing the resulting service to fail. A workaround is to manually create the directory with the right ownership,

Bug#760422: openssh-server: systemd service does not automatically create /var/run/sshd

Package: openssh-server Version: 1:6.6p1-7 Severity: important Dear Maintainer, When switching to systemd, the directory /var/run/sshd is not automatically created, causing the resulting service to fail. A workaround is to manually create the directory with the right ownership, but I have not ve

Bug#759575: Please, upgrade zendframework to latest 1.12.8 release

Hi Franck On Fri, Aug 29, 2014 at 11:07:10AM -0400, David Prévot wrote: > Please note that I already imported the history of the Debian package > into Git [0], where I already took care of related packages. I thus will > be updating the packaging there and will uploaded it once ready into the > D

Bug#710855: gdk-pixbuf: missing icons (thunar), reportbug won't start anymore due to missing debian logo

Package: libgdk-pixbuf2.0-0 Version: 2.30.8-1 Followup-For: Bug #710855 Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? todays dist-upgrade * What exactly did you do (or not do) that was effective (or in

Bug#759056: dicompyler: Please update to use wxpython3.0

Hi Olly, On Sun, Aug 24, 2014 at 12:19:35PM +1200, Olly Betts wrote: > Source: dicompyler > Version: 0.4.1-1-2 > Severity: important > Tags: sid jessie > User: freewx-ma...@lists.alioth.debian.org > Usertags: wxpy3.0 > Control: block 755757 by -1 > > ... > > http://anonscm.debian.org/cgit/collab

Bug#712729: The fix for this breaks other packages

On Wed, Sep 3, 2014 at 6:03 PM, Simon Ruderich wrote: > On Wed, Sep 03, 2014 at 03:37:01PM -0400, Felipe Sateler wrote: >> The change proposed by Simon prepends every variable known to make >> that starts with DEB_ , along with its value, to the invocation of >> dpkg-buildflags. The problem is tha

Bug#760421: libopenjpeg6-dev: arch-dependent file in "Multi-Arch: same" package

Package: libopenjpeg6-dev Version: 2.0.0-1 User: multiarch-de...@lists.alioth.debian.org Usertags: multiarch libopenjpeg6-dev is marked as "Multi-Arch: same", but the following file is architecture-dependent: /usr/include/openjpeg-2.0/opj_config.h An example diff between i386 and powerpc is a

Bug#712729: The fix for this breaks other packages

On Wed, Sep 03, 2014 at 03:37:01PM -0400, Felipe Sateler wrote: > The change proposed by Simon prepends every variable known to make > that starts with DEB_ , along with its value, to the invocation of > dpkg-buildflags. The problem is that some make variable names are > illegal as shell variable n

Bug#725690: gocr-tk: depends on tk8.5 and calls /usr/bin/wish

Hi. Any hope to have this tcl/tk issue fixed in gocr soon? It has caused gocr to be removed from Debian testing, and seen no reply from the package maintainer since it was submitted 2013-10-07 -- Happy hacking Petter Reinholdtsen -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.de

Bug#760079: This patch should do it.

Hi Hilko, On Wed, Sep 3, 2014 at 7:49 PM, Hilko Bengen wrote: > Here's a documented patch that should fix the FTBFS issues after running > autoreconf. Thanks at lot. An updated version is on its way to unstable. Cheers, Vincent -- To UNSUBSCRIBE, email to debian-bugs-dist-requ..

Bug#757826: crystalspace: please migrate to lcms2

Control: tags -1 patch On Mon, 11 Aug 2014 18:16:07 +0200 Tobias Frost wrote: > Package: crystalspace > Severity: serious > Control: block 717928 by -1 > > Dear maintainer, > > As described in #717928, your B-D lcms1 is to be removed for jessie. > Please migrate your package to use lcms2 > Ne

Bug#759850: FTBFS due to bug #759801

tags 759850 + pending thanks The FTBFS is a consequence of gprbuild bug #759801. A rebuild should solve the issue since gprbuild has been fixed in the meantime. I am currently updating the apq-postgresql package and will upload it as soon as it is ready. -- To UNSUBSCRIBE, email to debian-bugs

Bug#643341: [Pkg-gnupg-maint] Bug#643341: libgpg-error-dev: cross-compiling anything based on libgpg-error is painful

On 09/03/2014 04:25 PM, Helmut Grohne wrote: > One thing that libgpg-error can do nonetheless is to move > /usr/include/gpg-error.h to /usr/include//gpg-error.h. This > avoids accidental inclusion of a wrong-architecture header. Refer to > <20140829095214.gv19...@stoneboat.aleph1.co.uk> section 3.4

Bug#741648: RFS: cbootimage/1.2-2

Hi Marc, how are you? We need begin anew. So, I will analyse the packages from zero. In a first moment, we will work over cbootimage-configs only. Please: 1. The g GIT commit was on 2014-08-06. So, the version must be 0.0+20140806~git18e531f (I prefer git instead 'g'). 2. d/changelog: you need

Bug#760379: Fw: Re: Bug#760379: tuxpuck: window close button does not work

Begin forwarded message: Date: Wed, 3 Sep 2014 13:56:06 -0400 From: Charles Evans To: Markus Koschany Subject: Re: Bug#760379: tuxpuck: window close button does not work On Wed, 03 Sep 2014 17:20:55 +0200 Markus Koschany wrote: > Control: severity -1 wishlist > Control: retitle -1 menu con

Bug#758742: please don't restrict the list of architectures

Am 03.09.2014 um 22:43 schrieb Reto Buerki: > On 09/03/2014 06:53 PM, Matthias Klose wrote: >> not sure why it is a no-option. Fixing issues across architectures >> might improve quality of the library. > > I fully agree, but it is a question of available time to make the > library work on all arc

Bug#760420: installation-reports: jessie beta1 amd64 on Lenovo X201

Package: installation-reports -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/jessie_di_beta_1/amd64/iso-cd/debian-jessie-DI-b1-amd64-netinst.iso Date: 2014-09-03 Machine: Lenovo X201 Partitions: Filesystem Type 1K-blocks Used Available Us

Bug#760419: xutils-dev: Please add support for OpenRISC 1000 (or1k)

Package: xutils-dev Version: 1:7.7+3 Severity: wishlist Tags: patch upstream Forwarded: http://lists.x.org/archives/xorg-devel/2014-August/043526.html Please add support for OpenRISC 1000 (or1k). We are trying to get this architecture into debian-ports, but among other reasons it's not included b

Bug#758742: please don't restrict the list of architectures

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 09/03/2014 06:53 PM, Matthias Klose wrote: > Am 02.09.2014 um 23:38 schrieb Reto Buerki: >> On 09/02/2014 11:17 PM, Matthias Klose wrote: >>> Am 02.09.2014 um 23:06 schrieb Reto Buerki: But still, I'm conservative enabling new archs without >

Bug#759400: bug#18392: Bug#759400: emacs24-nox: segfault when saving emacs lisp file

Stefan Monnier writes: > Could you check whether the same problem shows up for the 24.4 pretest > (i.e. 24.3.93)? Also, worthwhile would be to test to see if building > with different optimization settings changes the result. Of course, I should have done this initially, but I just tried a clea

Bug#760418: activate module cvc in botan

Package: botan1.10 Version: 1.10.8-2 One of our applications uses botan and needs the cvc module. To build it on debian and ubuntu we have to rebuild botan1.10 on these platforms. Please enable it in the debian default config of the package by adding the additional parameter "--enable-modules=cvc

Bug#760417: aespipe: ftbfs on ppc64el due to endianess definitions

Source: aespipe Severity: normal Tags: patch User: debian-powe...@lists.debian.org Dear Maintainer, The package aespipe fails to build from source on ppc64el. That is due to an endianness definition within aes.c file, which assumes all powerpc as big endian, thus failing in the tests. https://b

Bug#760265: nouveau 1.0.11 is out, please package it

Control: tags -1 -moreinfo Control: tags -1 +pending On 2014-09-02 17:40 +0200, Sven Joachim wrote: > Control: tags -1 +moreinfo > > On 2014-09-02 11:03 +0200, Vlad Orlov wrote: > >> Package: xserver-xorg-video-nouveau >> Version: 1:1.0.10-1 >> Severity: wishlist >> >> As stated in the upstream c

Bug#760416: render bugs and CVE idendifiers at news as links

Package: tracker.debian.org Severity: normal Similar to the bug #756952, when I read the news of a package I'd like to have the (Closes: #n) and the Closes: line as a links to the BTS, and the CVE identifiers (e.g. CVE-2014-50471 (non-existent)) as a link to the security-tracker. -- System In

Bug#643341: [Pkg-gnupg-maint] Bug#643341: libgpg-error-dev: cross-compiling anything based on libgpg-error is painful

On Wed, Sep 03, 2014 at 03:58:59PM -0400, Daniel Kahn Gillmor wrote: > I'm unaware of any package that needs this particular requirement, and > it seems to me that any -dev package currently in the archive would have > the same issue, no? I do not know about the situation Colin has in mind, but th

Bug#724068: ITA: slowaes -- implementation of AES in python

retitle 724068 ITA: slowaes -- implementation of AES in python owner ! thanks Hello, I intend to adopt slowaes. Joseph signature.asc Description: Digital signature

Bug#760414: [ola] Some sources are not included in your package

Package: ola Version: 0.9.1-1 user: lintian-ma...@debian.org usertags: source-is-missing severity: serious X-Debbugs-CC: ftpmas...@debian.org Hi, Your package seems to include some files that lack sources in prefered forms of modification: tools/rdm/static/jquery-1.7.2.min.js tools/rdm/static/jq

Bug#760415: cups: Need to "reset" the printer between 2 jobs (very similar to STR #3964)"

Package: cups Version: 1.7.5-1 Severity: important Dear Maintainer, the symptoms are exactly the same as in the bug description of STR #3964 (upstream: http://www.cups.org/str.php?L3964 ) If I try to print twice the same simple file (for example a single page ps file), the first job prints perfec

Bug#760340: [Pkg-xfce-devel] Bug#760340: xfce4-battery-plugin: Only updates when I log in to xfce

On mar., 2014-09-02 at 21:55 -0500, Forrest Cahoon wrote: > xfce4-battery-plugin is only updating for me when I log out and log back in. > This is especially a problem when I don't notice my laptop charger has been > unplugged until the battery runs out :-( You're positively certain you're using x

Bug#760305: RFP: hasktags -- Produces ctags tags and etags TAGS files for Haskell programs

Hi, Am Dienstag, den 02.09.2014, 19:48 +0200 schrieb Thomas Koch: > I'm trying to setup my emacs for Haskell development and follow > https://github.com/serras/emacs-haskell-tutorial/blob/master/tutorial.md > > The only missing part from this guide so far that's not in Debian is hasktags. > > Is

Bug#760281: [Pkg-xfce-devel] Bug#760281: xfce4: cannot mount usb drive: "Not authorized to perform operation"

On mar., 2014-09-02 at 21:44 +0100, Julian Gilbey wrote: > On Tue, Sep 02, 2014 at 06:26:36PM +0200, Yves-Alexis Perez wrote: > > Control: reassign -1 systemd-shim > > > > On mar., 2014-09-02 at 15:21 +0100, Julian Gilbey wrote: > > > Having recently updated testing, I discover that I can no longe

Bug#760051: gnome-shell: owncloud-client's tray icon displayed as a single white pixel

Package: gnome-shell Version: 3.12.2-3 Followup-For: Bug #760051 Dear Maintainer, exact same problem here. The owncloud tray icon is always only one single pixel. Under xfce the icon is displayed correctly. The tray icon for gajim is also only visible as single pixel. The icons for icedove (using

Bug#760379: tuxpuck: window close button does not work

clone 760379 -1 retitle -1 tuxpuck: window close button does not work severity -1 normal thanks Hi, please keep the bug report in CC. On 03.09.2014 19:56, Charles Evans wrote: [...] > I retested, under lxde/metacity and under kde/kwin, and > the X symbol is there, and works for everything else

Bug#643341: [Pkg-gnupg-maint] Bug#643341: libgpg-error-dev: cross-compiling anything based on libgpg-error is painful

On 09/03/2014 01:28 PM, Colin Watson wrote: > That said, the problem hasn't gone away entirely as we'll encounter it > as soon as we have something like a package that needs to build both > build and host architecture versions of a package linked against > libgpg-error. Can you point to such a pac

Bug#760412: kdelibs5-dev: Hardcoded "Found KDE 4.12" in FindKDE4Internal.cmake

Package: kdelibs5-dev Version: 4:4.14.0-1 Severity: minor Inside FindKDE4Internal.cmake there are hardcoded strings "Found KDE 4.12" line 1440 and line 1446 If installing 4.14.0-1, I expect to read "Found KDE 4.14" -- System Information: Debian Release: jessie/sid APT prefers unstable APT po

Bug#712729: The fix for this breaks other packages

On Wed, Sep 3, 2014 at 3:32 PM, Jonas Smedegaard wrote: > Quoting Felipe Sateler (2014-09-03 20:47:58) >> Control: reopen -1 >> Control: severity -1 serious >> >> On Thu, 21 Aug 2014 22:04:00 + Jonas Smedegaard wrote: >>>* Fix preserve compiler flags set using DEB_* environment >>> v

Bug#754907: tracker-extract: Spams system logs

Not just that. Tracker now also outputs the whole content of all documents, where the indexing fails, which happens quite often. Now my syslog contains dozens of cases like this: Sep 3 21:15:09 holly gnome-session[2291]: (tracker-extract:2523): Tracker-WARNING **: Task 15, error: Unable to inser

Bug#712729: The fix for this breaks other packages

Quoting Felipe Sateler (2014-09-03 20:47:58) > Control: reopen -1 > Control: severity -1 serious > > On Thu, 21 Aug 2014 22:04:00 + Jonas Smedegaard wrote: >>* Fix preserve compiler flags set using DEB_* environment >> variables, in langcore.mk. >> Closes: bug#712729. Thanks to

Bug#760410: gettext-base: should be Multi-Arch?

On Wed, Sep 3, 2014 at 12:09 PM, Thorsten Glaser wrote: > gettext-base:i386 and gettext-base:x32 are not coïnstallable, > although I don't see from their dpkg -L output why not, or > why they aren't arch:all. gettext-base contains /usr/bin/gettext which is arch-specific, right? On the other hand,

Bug#760386: qemu: please enable the x32 architecture

Control: tag -1 + pending 03.09.2014 22:54, Thorsten Glaser wrote: > Michael Tokarev dixit: > >> I'd love to add it, but simply adding 'x32' to the list of >> Architecture: lines is not sufficient. The problem is that > > It is now. Okay. I enabled x32 even before your reply, because, at leas

Bug#760396: pdf2djvu: Recent versions compress very badly

Hi Vincent! Upstream speaking here. * Vincent Fourmond , 2014-09-03, 18:14: It used to work for me: -rw-r--r-- 1 fv fv 7243832 Sep 3 18:05 a.djvu -rw-r--r-- 1 fv fv 5435575 Sep 3 18:04 a.pdf -rw-r--r-- 1 fv fv 1634030 Sep 3 18:07 c.djvu -rw-r--r-- 1 fv fv 974299 Nov 7 wood91.djvu wood91

  1   2   3   4   >