[Bug 213081] Re: CUPS does not print to LPD printer
I have tested it here by installing kernel 2.6.27-1-generic on Hardy (downloaded from http://kernel.ubuntu.com/pub/next/2.6.27-rc3/hardy/), then removed the workaround patch (net.ipv4.tcp_frto = 0) from sysctl.conf and rebooted with the new kernel. It seems that the bug is gone with this kernel since IP printing now works normally without the patch. Thanks for fixing it :-) Patrick -- CUPS does not print to LPD printer https://bugs.launchpad.net/bugs/213081 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Another strange thing: I did one last test now: I installed gOS, which appears to be a Google variant of Ubuntu. This one obviously corresponds to Hardy. This Hardy variant booted to 1024x768, which is higher than I could get with the original Hardy and much better than the no video with Intrepid. It then offered to install the fglrx driver, and guess what? Now the laptop runs at its native resolution of 1280x800 for the first time :-) But this is no solution to the bug in Intrepid of course. I will refrain from upgrading for the time being ;-) Patrick -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 252307] Re: Realtek 8168 installs as an 8169 and the Laptop has no network connection
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- Realtek 8168 installs as an 8169 and the Laptop has no network connection https://bugs.launchpad.net/bugs/252307 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
** This bug is no longer a duplicate of bug 141343 r8169 driver does not work with Realtek "PCI-E" 8111B integrated network controller ** Changed in: linux (Ubuntu) Sourcepackagename: linux-restricted-modules => linux -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
I have made a strange observation, maybe it helps anyone to find out what the problem is. I now work on Hardy, since I can't use Intrepid without network. Because otherwise my machine hangs during boot, I use the kernel parameter "acpi=off" (or "acpi=ht"). With these parameters, the network card works fine under Hardy (kernel 2.6.24-21-generic). BUT... if I remove "acpi=off" and add "nosmp", the same symptoms occur with Hardy (no network, no DHCP, also no network with manual IP config) as reported here for Intrepid. This is reproducible. I will now make a final test and see if the Intrepid live CD has network if booted with "acpi=off". Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
So, back from rebooting... Intrepid live CD with "acpi=off" --> network OK Intrepid live CD without "acpi=off" (but with "noapic nolapic", otherwise it hangs) --> no network So: probably a problem with ACPI. The card seems to have a sleep mode, see the Realtek page: "Features [...] * Supports power down/link down power saving" Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
I have a solution :-) Following a tip from news://de.comp.os.unix.linux.misc, I tried various kernel parameters, and *for me* it seems to be an ACPI bug. With the parameter "pci=nomsi", my Realtek RTL8111/8168B network adapter now works under both Hardy and Intrepid. Please tell if this helps you also or if there are different bugs leading to a nonfunctioning Realtek network adapter. Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
No problems here any more with kernel 2.6.29 (using sidux or Debian testing with 2.6.29 kernel from sid). No kernel parameters needed any more for booting correctly, everything works, even 2 cores (which didn't work before). Several problems with the ASUS motherboard have vanished with this kernel. So the problems seem to have been corrected upstream. As far as I am concerned, the bug may be closed. Any comments? Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267254] Re: acpi error on startup
I see this is a relatively old message, but I think I have a solution, so possibly it will help someone... I had the same problem with my ASUS X 56 T notebook (M51TR motherboard, AMD Turion ZM82 dual core processor). The problem seems to have been solved upstream, all Debian sid or sidux 2.6.29 kernels work, any other kernels from any distro don't and produce the same symptoms as you described. As a workaround, don't use acpi=off. Use instead maxcpus=1. This should enable ACPI with the older kernels without crashing, if it is really the same problem, as I suspect because our machines share a motherboards from the same series. (M51T/TR). However, you can only use one CPU core (also with acpi=off, so nothing lost). To use both cores and ACPI without crashing, you have to use a 2.6.29 kernel, so either - compile one yourself - or install one from the Debian sid or sidux repository (don't install anything else from there, mixing Ubuntu and Debian won't work) - or wait for Ubuntu to bring it to you via dist-upgrade (takes probably until 2009-10) Patrick -- acpi error on startup https://bugs.launchpad.net/bugs/267254 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 208012] Re: Realtek RTL8168C/8111C ethernet compatibility
Results of further tests: A new install of Hardy shows 1) A working r8168 network adapter 2) the supposedly wrong module r8169 in lsmod --> there must be another reason for this problem in Gutsy (OP) and Intrepid (myself) --> A regression? r8169 module works with r8168 adapter in Hardy but not in Gutsy and Intrepid Patrick -- Realtek RTL8168C/8111C ethernet compatibility https://bugs.launchpad.net/bugs/208012 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 212497] Re: r8169 driver does not work with Realtek RTL8111C gigabit ethernet chip in Ubuntu 8.04 Hardy Heron
I can confirm the observations made by the_one(2) and Emanuele Pane. On my machine, RealTek RTL8111/6168B network adapter: - works on Hardy (Kubuntu) vanilla install (the original 8.04 CD) - does not work on Intrepid beta install (also Kubuntu) - the patch exchanging the r6168 for the r8169 module does not work for Intrepid - in the working Hardy installation, the r8169 module is loaded and not the r8168, but nevertheless it works Patrick -- r8169 driver does not work with Realtek RTL8111C gigabit ethernet chip in Ubuntu 8.04 Hardy Heron https://bugs.launchpad.net/bugs/212497 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Tested it again with Kubuntu Intrepid final live CD (64 bit). Still no graphics, only text console. Adding a BusID parameter in xorg.conf doesn't help. log file and output of lspci and lsmod attached. System: Asus X56Rseries Graphics: ATI Mobility Radeon HD 3470 Patrick ** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/19198054/Xorg.0.log -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Correction: Asus 56T series Here comes lspci output: ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/19198094/lspci.txt -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
lsmod output: ** Attachment added: "lsmod.txt" http://launchpadlibrarian.net/19198102/lsmod.txt -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
Just tested with Intrepid final live CD (AMD64). Network still not working. lspci attached. ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/19205267/lspci.txt -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
And here comes lsmod output ** Attachment added: "lsmod.txt" http://launchpadlibrarian.net/19205271/lsmod.txt -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
** Also affects: xorg-server (Fedora) Importance: Undecided Status: New ** Also affects: xorg-server (openSUSE) Importance: Undecided Status: New -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
Tested with a live DVD with two other distros. The problem is also present in openSuse 11.1 beta, but *not* in Fedora 10 beta (all with 2.6.27 kernels). In Fedora everything is fine, the network card works, DHCP works, internet works, every thing. Strange. Patrick ** Also affects: linux-restricted-modules (openSUSE) Importance: Undecided Status: New -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Tested now with live DVD with two other distros... openSuse 11.1 beta --> same problem (Radeon Mobility HD 3470) Fedora 10 beta --> live DVD has 1024x768 graphics, installation on harddisk has the problem again Patrick -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Tom: This is probably not the same problem, as you were able to get 800x600. I just get no X at all, just console login, with all variants: upgrade from Hardy, live CD and fresh hard disk install. Hardy BTW can do something like 800x600 on my machine, but the output looks awful (blurred letters, changing colors etc.) Patrick -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 267241] Re: [intrepid] X11: no device detected
Timo: I just looked at the BIOS settings, but this Asus laptop (X56T) has relatively few BIOS settings, most of which are very basic (boot sequence, time/date, etc.), and none of them seems related to the graphics card. Patrick -- [intrepid] X11: no device detected https://bugs.launchpad.net/bugs/267241 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
*** This bug is a duplicate of bug 141343 *** https://bugs.launchpad.net/bugs/141343 Emanuele, I think I used the 64 bit variants (the CD contains both) since my main motive was to have an operating system that can use the full 4 GB that I have. The thing with the older Ubuntu versions is, it looks as if it did not work in Gutsy. It definitely works in Hardy on my machine. It definitely does not work in any variant of Intrepid (32 or 64 bit, beta or final, live CD, upgrade or clean install). And the fact that it is a r816*9* driver dealing with an r816*8* card is not the sole cause, since this constellation is in Hardy also, and it works there. May be a regression. Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
*** This bug is a duplicate of bug 141343 *** https://bugs.launchpad.net/bugs/141343 s/CD/DVD/ -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
Same problem here, with Realtek RTL8168C/8111C ethernet adapter. System is ASUS X56T laptop with 4 GB RAM and Turion ZM82 CPU. Kernel boot parameters are noapic, nolapic, and acpi=ht; otherwise it will not boot. Vanilla Hardy install (original 8.04 CD) --> works Hardy with all updates --> still works Hardy upgrade to Intrepid with update-manager -d --> ceases to work after reboot with new system Intrepid beta CD install --> does not work The network card does not get an IP address via DHCP. Manually assigning one does not help. No address in the same network (e.g. computer 192.168.2.16, gateway 192.168.2.1, netmask 255.255.255.0) can be pinged. Already reported in https://bugs.launchpad.net/bugs/212497, but bug is closed and reported as fixed. The problem persists however. If you need any logs please say so, as I am not very experienced in reporting bugs, and, as I cannot work on the broken installation (no network and no graphics), I'll have to reboot to that partition to check. Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 286489] Re: Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA
Sorry, I forgot: This seems to affect 32 bit and 64 bit alike. The upgraded and then dysfunctional Hardy->Intrepid installation was 32 bit, and the fresh Intrepid CD installation not working from the beginning was 64 bit. Patrick -- Intrepid Ibex 2.6.27-7: r8169 driver does not work with Realtek RTL8111B gigabit ethernet chip in Ubuntu 8.10 BETA https://bugs.launchpad.net/bugs/286489 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 251344] Re: Hardy proposed 2.6.24-20-generic kernel update will not boot
Not only generic... Same here with Kubuntu 8.04 using the -rt variant (2.6.24-20-rt). Not tested with -generic because that causes other problems on my machine (freeze on USB access). Acer Travelmate 220 Mobile Intel Celeron 1333 1 GB RAM -- Hardy proposed 2.6.24-20-generic kernel update will not boot https://bugs.launchpad.net/bugs/251344 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 208012] Re: Realtek RTL8168C/8111C ethernet compatibility
Same problem here, with ASUS X56T and Kubuntu Intrepid. Out-of-the-box beta install, without any updates (how? without network?). Problem is: above instructions do not help. The wrong module r8169 has been removed successfully, the correct module compiled OK and could be inserted correctly. But after reboot no joy, still no network depite lsmod showing the correct module r8168 in place. Any suggestions? Cannot attach any output at the moment (am inside Windows now), will do this later when I reboot anyway. Is anything else needed except lsmod and lspci output? Thank you in advance Patrick -- Realtek RTL8168C/8111C ethernet compatibility https://bugs.launchpad.net/bugs/208012 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 252307] Re: Realtek 8168 installs as an 8169 and the Laptop has no network connection
I have the same problem with an ASUS X56T under Intrepid. However, the r8169 driver does *not* seem to be the cause: - Substitution of r8169 with r8168 as listed above doesn't work, still no network - Hardy 8.04 install from scratch still has network connection after all updates and reboot. But: lsmod shows r8169 module being loaded. So: Is there another component of this bug or is this another bug? Patrick -- Realtek 8168 installs as an 8169 and the Laptop has no network connection https://bugs.launchpad.net/bugs/252307 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237759] Re: Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem.
Same problem here: - Hardy with kernel 2.6.24.19-rt cannot print to IP printer (socket://192.168.x.x) using LogiLink PS0001 parallel printserver and HP-Lj-2-compatible printer (IBM-4037-5E in HP compatible mode) with "HP LaserJet 2 Foomatic/laserjet (recommended)" driver. Printer accepts some data, then switches to "waiting". - Same printer works flawlessly from virtualbox Windows XP as a guest under Hardy with bridged networking. Did not try older kernels so far, as recommended by some. Patrick -- Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem. https://bugs.launchpad.net/bugs/237759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237759] Re: Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem.
P.S.: Sorry about the Windows virtual machine bit, no trolling intended. I mentioned it only as an indicator that it is no hardware issue in my case. Patrikc -- Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem. https://bugs.launchpad.net/bugs/237759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237759] Re: Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem.
Tested same configuration with 2.6.22-14-generic kernel (from gutsy repos), printer works. Seems to be a kernel problem with the 2.6.24 series, as already suggested by others. Patrick -- Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem. https://bugs.launchpad.net/bugs/237759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237759] Re: Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem.
** Also affects: linux Importance: Undecided Status: New -- Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem. https://bugs.launchpad.net/bugs/237759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237759] Re: Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem.
*** This bug is a duplicate of bug 213081 *** https://bugs.launchpad.net/bugs/213081 Marked as duplicate after further research. The workaround is also mentioned in the other bug report: add a line with net.ipv4.tcp_frto = 0 to /etc/sysctl.conf. Works a charm here :-) ** This bug has been marked a duplicate of bug 213081 CUPS does not print to LPD printer -- Cannot print to a printserver connected printer from ubuntu 8.04, while ubuntu 7.10 and 7.04 do the job without any problem. https://bugs.launchpad.net/bugs/237759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] [NEW] complete freeze during access of pccard/usb adapter
Public bug reported: Binary package hint: linux-image-2.6.24-17-generic This is a problem I encountered after upgrading from Gutsy to Hardy. My machine is an Acer Travelmate 220 with a D-Link (NEC) PC-card (PCMCIA) to USB 2.0 adapter. Intensive use of storage devices (external hard disk, USB stick) connected to this adapter reproducibly causes a complete freeze of the machine after a while. Neither Ctrl-Alt-Backspace nor the SysRq key combinations work. This bug occurs under the following circumstances: Hardy upgraded from Gutsy, Hardy fresh install, Gnome/KDE/terminal, kernel 2.6.24-15-generic to 2.6.24-17-generic (others not tested). This bug does not occur: with Gutsy (latest updates); with Hardy and kernel 2.6.24-17-rt. No relevant messages in /var/log/messages. Output of lsb_release -rd: Description:Ubuntu 8.04 Release:8.04 Output of apt-cache policy linux-image-2.6.24-17-generic: linux-image-2.6.24-17-generic: Installiert:2.6.24-17.31 Mögliche Pakete:2.6.24-17.31 Versions-Tabelle: *** 2.6.24-17.31 0 500 http://de.archive.ubuntu.com hardy-proposed/main Packages 100 /var/lib/dpkg/status Current output of lsusb (external hard drive and usb stick attached): Bus 002 Device 001: ID : Bus 001 Device 001: ID : Bus 004 Device 001: ID : Bus 003 Device 001: ID : Bus 005 Device 038: ID 0411:0098 MelCo., Inc. Bus 005 Device 037: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter Bus 005 Device 036: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 005 Device 001: ID : Current output of lspci: 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) 00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) 00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:09.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller 02:00.0 USB Controller: NEC Corporation USB (rev 43) 02:00.1 USB Controller: NEC Corporation USB (rev 43) 02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] Re: complete freeze during access of pccard/usb adapter
Cannot attach dmesg.log at the moment, running with -rt kernel, system stable with this kernel. When the freezes occurred and I looked, there were no messages in there with timestamps near the freeze. -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] Re: complete freeze during access of pccard/usb adapter
** Attachment added: "lspci-vvnn.log" http://launchpadlibrarian.net/14671096/lspci-vvnn.log -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] Re: complete freeze during access of pccard/usb adapter
** Attachment added: "version.log" http://launchpadlibrarian.net/14671083/version.log -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] Re: complete freeze during access of pccard/usb adapter
I cannot at the moment install an alpha release since I cannot afford any problems on this machine. However I installed the 2.6.27-1-generic kernel into Hardy from http://kernel.ubuntu.com/pub/next/2.6.27-rc3/hardy/ and the bug seems to have been fixed for this -generic kernel (the -rt variants always worked fine). Patrick -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234084] Re: complete freeze during access of pccard/usb adapter
Tested now freshly compiled 2.6.25 kernel from kernelcheck. Same problem with random freeze on USB access. No problem still with the -rt kernel series (latest checked is 2.6.24-19-rt from the Hardy repos). Patrick -- complete freeze during access of pccard/usb adapter https://bugs.launchpad.net/bugs/234084 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236335] Re: 2.6.24 kernel random freezes on acer laptop
It is probably worth a try to use the -rt (realtime) kernel series instead of the -generic series (sudo apt-get install linux-rt, latest is currently 2.6.24-19-rt). I am experiencing similar problems with the generic kernel series on an Acer laptop (see bug #234084) when accessing USB devices (via a PC-Card [PCMCIA] adapter in this case). They go away when I use an rt kernel. HTH Patrick -- 2.6.24 kernel random freezes on acer laptop https://bugs.launchpad.net/bugs/236335 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
** Also affects: plymouth Importance: Undecided Status: New -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
Just in case anyone reads this and has the same problem, here is a workaround: Edit /etc/modprobe.d/radeon-kms.conf and insert/change the line options radeon modeset=0 This restores the "old" behavior of the driver as in Ubuntu <= 9.10 (working tty's, reasonably fast, compositing only with xrender, not with opengl). When the bug is eventually resolved, change it back to options radeon modeset=1 Patrick -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
Sorry if this sounds dumb, but why does this bug remain "incomplete"? Which information is missing? And why does it not get assigned to someone? This bug is really a showstopper for anyone with this video card. radeon.modeset=0 also does not work anymore. The main problem is that there is no working text mode at all. That means if anything goes wrong during the text mode only phase of the boot (between grub and kdm/gdm), e.g. a stuck fsck with a question or somesuch, the screen stays dark (or rather looks as if the LCD is melting...) and the system is unusable. The only way out is to reboot - in the example complete the fsck run from a live CD - and reboot again in the hope that the next boot goes through. Any newbie would be totally stuck when this occurs. BTW, I also tested with the mainline kernels from the kernel ppa, but there is no difference. If I can contribute anything to troubleshoot this bug (short of rewriting the code, I only 'speak' Pascal and Basic well enough), would anyone please tell me. Patrick -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
I have looked through the BIOS settings, it is definitely not possible to disable the 3200 in the BIOS. Patrick -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
By the way, the machine is an ASUS X56T (or TR) laptop. I believe it is also identical to the M51(R) model sold elsewhere. -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
Same problem also on Debian sid / sidux, current updates. ** Also affects: xserver-xorg-video-ati (Debian) Importance: Undecided Status: New -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] [NEW] No virtual terminals on radeon HD 3200/3400
Public bug reported: Binary package hint: xserver-xorg-video-ati I am currently testing Kubuntu 10.04 alpha3, and everything works OK except that: - there is no splash screen and no boot messages on startup (the screen goes blank after making a selection in GRUB and does not turn on again until the graphical KDM screen appears) and - ** the tty consoles do not work ** (Ctrl-Alt-F1 and the like). There is no adequate response to the Ctrl-Alt-F1 (...F6) keys, i.e. the KDE desktop stays on the screen, the mouse cursor disappears, but nothing further happens. The /sbin/getty processes are running for tty1 to tty6. sudo chvt [1-6] has the same effect. Initially, on Ctrl-Alt-F8 the mouse cursor used to reappear (i.e. switching back to the GUI worked). After the latest updates, trying to switch to a virtual terminal seems to freeze the GUI and, since there is no accessible terminal and a frozen GUI, requires a reboot. I suspect that the problem has something to do with the framebuffer. System information: OS: Ubuntu lucid (dev) · Kernel: 2.6.32-16-generic · KDE: 4.4.1 (KDE 4.4.1) CPU: AMD Turion(tm) Dual-Core Mobile ZM-82 · RAM: 1367392kB/3799764kB VGA: ATI RS780M/RS780MN [Radeon HD 3200] / ATI Mobility Radeon HD 3400 Installed graphics driver: automatically with OS installation, no modification (must be ati i.e. radeon). latest updates as of March 17, 21:20 UTC using default sources.list(.d/*) from 10.04 alpha3 What I already did: 1. place Option "DontVTSwitch" "false" in xorg.conf (does not help) 2. uninstall plymouth (does not help) 3. place radeon.modeset in kernel grub line (and remove quiet splash). This makes the boot messages appear and restores the normal function of the virtual terminals. This is a workaround, but: slow graphics, no acceleration, no effects. The problem does not depend on the desktop/window manager, it appears in KDE/KWin and whatever Gnome uses (compiz or metacity) alike. Patrick ProblemType: Bug Architecture: amd64 Date: Wed Mar 17 22:18:19 2010 DistroRelease: Ubuntu 10.04 DkmsStatus: virtualbox-ose, 3.1.4, 2.6.32-16-generic, x86_64: installed GdmLog2: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.2'] failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100224.1) MachineType: ASUSTeK Computer Inc. M51Tr Package: xserver-xorg-video-ati 1:6.12.191-1ubuntu2 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-16-generic root=UUID=e4d022ea-a8d7-4643-9e2a-0350647bf780 ro radeon.modeset=0 ProcEnviron: LANGUAGE= PATH=(custom, user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-16.25-generic SourcePackage: xserver-xorg-video-ati Uname: Linux 2.6.32-16-generic x86_64 dmi.bios.date: 07/31/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 205 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: M51Tr dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr205:bd07/31/2008:svnASUSTeKComputerInc.:pnM51Tr:pvr1.0:rvnPEGATRONCORPORATION:rnM51Tr:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr: dmi.product.name: M51Tr dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. system: distro: Ubuntu codename: lucid architecture: x86_64 kernel: 2.6.32-16-generic ** Affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: No virtual terminals on radeon HD 3200/3400
** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/41167657/BootDmesg.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/41167658/CurrentDmesg.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/41167659/Dependencies.txt ** Attachment added: "GdmLog.txt" http://launchpadlibrarian.net/41167660/GdmLog.txt ** Attachment added: "GdmLog1.txt" http://launchpadlibrarian.net/41167661/GdmLog1.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/41167662/Lspci.txt ** Attachment added: "Lsusb.txt" http://launchpadlibrarian.net/41167663/Lsusb.txt ** Attachment added: "PciDisplay.txt" http://launchpadlibrarian.net/41167664/PciDisplay.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/41167665/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/41167666/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/41167667/ProcModules.txt ** Attachment added: "RelatedPackageVersions.txt" http://launchpadlibrarian.net/41167668/RelatedPackageVersions.txt ** Attachment added: "UdevDb.txt" http://launchpadlibrarian.net/41167669/UdevDb.txt ** Attachment added: "UdevLog.txt" http://launchpadlibrarian.net/41167670/UdevLog.txt ** Attachment added: "XorgConf.txt" http://launchpadlibrarian.net/41167671/XorgConf.txt ** Attachment added: "XorgLog.txt" http://launchpadlibrarian.net/41167672/XorgLog.txt ** Attachment added: "XorgLogOld.txt" http://launchpadlibrarian.net/41167673/XorgLogOld.txt ** Attachment added: "Xrandr.txt" http://launchpadlibrarian.net/41167674/Xrandr.txt ** Attachment added: "glxinfo.txt" http://launchpadlibrarian.net/41167675/glxinfo.txt ** Attachment added: "setxkbmap.txt" http://launchpadlibrarian.net/41167676/setxkbmap.txt ** Attachment added: "xdpyinfo.txt" http://launchpadlibrarian.net/41167677/xdpyinfo.txt ** Attachment added: "xkbcomp.txt" http://launchpadlibrarian.net/41167678/xkbcomp.txt -- No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: No virtual terminals on radeon HD 3200/3400
ati is the metapackage, radeon module is actually loaded -- No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: No virtual terminals on radeon HD 3200/3400
** Description changed: Binary package hint: xserver-xorg-video-ati - I am currently testing Kubuntu 10.04 alpha3, and everything works OK except that: - - there is no splash screen and no boot messages on startup (the screen goes blank after making a selection in GRUB and does not turn on again until the graphical KDM screen appears) and + I am currently testing Kubuntu 10.04 alpha3, and everything works OK except that: + - there is no splash screen and no boot messages on startup (the screen goes blank after making a selection in GRUB and does not turn on again until the graphical KDM screen appears) and - ** the tty consoles do not work ** (Ctrl-Alt-F1 and the like). There is no adequate response to the Ctrl-Alt-F1 (...F6) keys, i.e. the KDE desktop stays on the screen, the mouse cursor disappears, but nothing further happens. The /sbin/getty processes are running for tty1 to tty6. sudo chvt [1-6] has the same effect. Initially, on Ctrl-Alt-F8 the mouse cursor used to reappear (i.e. switching back to the GUI worked). After the latest updates, trying to switch to a virtual terminal seems to freeze the GUI and, since there is no accessible terminal and a frozen GUI, requires a reboot. I suspect that the problem has something to do with the framebuffer. System information: OS: Ubuntu lucid (dev) · Kernel: 2.6.32-16-generic · KDE: 4.4.1 (KDE 4.4.1) CPU: AMD Turion(tm) Dual-Core Mobile ZM-82 · RAM: 1367392kB/3799764kB VGA: ATI RS780M/RS780MN [Radeon HD 3200] / ATI Mobility Radeon HD 3400 - Installed graphics driver: automatically with OS installation, no modification (must be ati i.e. radeon). + Installed graphics driver: automatically with OS installation, no modification. Loaded module is radeon. latest updates as of March 17, 21:20 UTC using default sources.list(.d/*) from 10.04 alpha3 What I already did: - 1. place Option "DontVTSwitch" "false" in xorg.conf (does not help) + 1. create a minimal xorg.conf and place Option "DontVTSwitch" "false" in it (does not help) 2. uninstall plymouth (does not help) - 3. place radeon.modeset in kernel grub line (and remove quiet splash). This makes the boot messages appear and restores the normal function of the virtual terminals. This is a workaround, but: slow graphics, no acceleration, no effects. + 3. place radeon.modeset=0 in kernel grub line (and remove quiet splash). This makes the boot messages appear and restores the normal function of the virtual terminals. This is a workaround, but: slow graphics, no acceleration, no effects. The problem does not depend on the desktop/window manager, it appears in - KDE/KWin and whatever Gnome uses (compiz or metacity) alike. + KDE/KWin and whatever Gnome uses (compiz or metacity) alike. As a side + note, I am using two screens (laptop LVDS and external VGA-0/VGA-1) with + xrandr. Patrick ProblemType: Bug Architecture: amd64 Date: Wed Mar 17 22:18:19 2010 DistroRelease: Ubuntu 10.04 DkmsStatus: virtualbox-ose, 3.1.4, 2.6.32-16-generic, x86_64: installed GdmLog2: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.2'] failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100224.1) MachineType: ASUSTeK Computer Inc. M51Tr Package: xserver-xorg-video-ati 1:6.12.191-1ubuntu2 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-16-generic root=UUID=e4d022ea-a8d7-4643-9e2a-0350647bf780 ro radeon.modeset=0 ProcEnviron: - LANGUAGE= - PATH=(custom, user) - LANG=de_DE.UTF-8 - SHELL=/bin/bash + LANGUAGE= + PATH=(custom, user) + LANG=de_DE.UTF-8 + SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-16.25-generic SourcePackage: xserver-xorg-video-ati Uname: Linux 2.6.32-16-generic x86_64 dmi.bios.date: 07/31/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 205 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: M51Tr dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr205:bd07/31/2008:svnASUSTeKComputerInc.:pnM51Tr:pvr1.0:rvnPEGATRONCORPORATION:rnM51Tr:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr: dmi.product.name: M51Tr dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. system: - distro: Ubuntu - codename: lucid - architecture: x86_64 - kernel: 2.6.32-16-generic + distro: Ubuntu + codename: lucid + architecture: x86_64 + kernel: 2.6.32-16-generic -- No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
I don't think I have any graphics card related options in the BIOS (AMI with relatively few settings, laptop). I will look it up at next boot. The normal graphics modes work well as is, since the upgrade to Lucid even with 3D effects, also with xrandr and dual screen, it's only the tty's that are broken. Patrick -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 446146] Re: Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)
2.6.31-15-generic #49-Ubuntu SMP Fri Nov 6 09:55:13 UTC 2009 x86_64 GNU/Linux from Karmic proposed repo works with E620 here patr...@linuxps:~$ lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 003: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 006 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 008: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem Bus 001 Device 006: ID 064e:f111 Suyin Corp. Bus 001 Device 005: ID 2040:7070 Hauppauge Nova-T Stick 3 Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub dmesg attached Patrick ** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/35330918/dmesg.txt -- Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related) https://bugs.launchpad.net/bugs/446146 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 446146] Re: Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related)
Russell Faull wrote: > The kernel meta-packages (linux, linux-generic etc) do not seem to trigger an > upgrade to *-15.49 although the > new packages are shown in Synaptic after a reload in the what's new in > repository section. If this is > widespread, it does not seem normal behavior and will make it harder for > novice users to upgrade. Running > apt-get update and apt-get upgrade has similar results. > Are others experiencing this? Yes, I had the same issue. apt-get dist-upgrade did not pull these packages in. I only got aware that the packages are actually in the repo after I manually installed the kernel debs from https://launchpad.net/ubuntu/karmic/+source/linux/2.6.31-15.49 but forgot one of the kernel header files. apt-get dist-upgrade suggested that I execute "apt-get -f install". And voilà, when I did this, apt-get pulled the missing deb from the -proposed repo. To make sure everything fit together I removed the manually installed kernel and installed the packages with apt-get using their full names, which worked. Patrick -- Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update related) https://bugs.launchpad.net/bugs/446146 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 714826] [NEW] package sudo 1.7.2p7-1ubuntu2.1 failed to install/upgrade: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-insta
Public bug reported: Binary package hint: sudo Distribution upgrade from Kubuntu 10.10 to 11.04 alpha2 ProblemType: Package DistroRelease: Ubuntu 11.04 Package: sudo 1.7.2p7-1ubuntu2.1 ProcVersionSignature: Ubuntu 2.6.35-26.46-generic 2.6.35.10 Uname: Linux 2.6.35-26-generic x86_64 Architecture: amd64 Date: Mon Feb 7 20:08:50 2011 ErrorMessage: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100224.1) SourcePackage: sudo Title: package sudo 1.7.2p7-1ubuntu2.1 failed to install/upgrade: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) VisudoCheck: /etc/sudoers: parsed OK ** Affects: sudo (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/714826 Title: package sudo 1.7.2p7-1ubuntu2.1 failed to install/upgrade: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 714826] Re: package sudo 1.7.2p7-1ubuntu2.1 failed to install/upgrade: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-install
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/714826 Title: package sudo 1.7.2p7-1ubuntu2.1 failed to install/upgrade: ErrorMessage: Paket sudo ist nicht bereit zur Konfiguration kann nicht konfiguriert werden (momentaner Status »half-installed«) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 540547] Re: [Multi-GPU] No virtual terminals on radeon HD 3200/3400
Still not fixed in maverick as of today, open source radeon driver, latest updates. The described workaround with radeon-kms.conf still works. Patrick -- [Multi-GPU] No virtual terminals on radeon HD 3200/3400 https://bugs.launchpad.net/bugs/540547 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
