DAT Drive

[Webmaster]

Hi All,

I'm looking to purchase a good but "low" priced SCSI DAT drive.  Can anyone
suggest a make/model DAT drive that will work fine with Debian Woody 3.0r1
powerpc.

Thanks,

Kevin



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: That movie

[webmaster]

This is an autoresponder. I'll never see your message.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unidentified subject!

[webmaster]

UNDELIVERABLE E-MAIL NOTICE


You have sent an e-mail message to an invalid address 
at the BRUMAN.COM mail server.  Please verify the accuracy
of the BRUMAN.com e-mail address you are using and 
resend or remove the address from your distribution
list(s), as may be appropriate. 


Please be advised that receipt of this autoresponse 
does NOT indicate that anyone has received your original
e-mail.


Any questions concerning this message should be directed
to [EMAIL PROTECTED]  If you need further assistance,
please contact us by telephone at 202-965-3652.  


Thank you.

BRUSTEIN & MANASEVIT
Attorneys at Law



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

广州惠邦发给你的贺卡

[webmaster]

Title: ¹ãÖݻݰ¸øÄãµÄºØ¿¨£¡






  
 
  
  

 
  àË£¡ÄúÊÕµ½ÁËÒ»ÕÅÊ¥µ®/ÐÂÄêºØ¿¨£¡ 

·¢ËÍÈËÊÇ£ºÀ¶»Ý°î 
ÇëÄúµ½ÒÔϵÄÁ¬½áÌáÁ죺http://www.digitalbhb.com/DigitalStore2/gg/Christmas.htm 

Èç¹û²»ÄÜÌáÁìµÄ»°£¬Ç뽫ÒÔÉÏÁ´½ÓµØÖ·¸´ÖÆÕ³ÌùÔÚÍøÖ·À¸¾ÍÐÐÁË£¡ 
»òµ½http://www.digitalbhb.com 
µã»÷Ê¥µ®ÀñÎï¼´¿ÉÌáÈ¡£¡ 
Ï£ÍûÄúϲ»¶! 
À¶»Ý°îÏòÄúÖÂÒ⣡ 


  --- ¹ãÖݻݰîʵҵÓÐÏÞ¹«Ë¾

  
  
  

  





-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Free Fund Raising Information

[webmaster]

Mailloop is the world's most powerful mailer.
http://www.mailloop.com

Press Release:

FREE FUND RAISING TIPS AND SUPPORT

Announcing The Internet Fund Raising Resource

Free tips on fund raising from the grass roots, door to door level to formal 
banquets for 500+ from the author of 'Proven Techniques of Successful Fund 
Raising'.
Do you want to know how to net $20,000.00 in just 90 days, or $200,000.00 in 18 
months on your next event?

http://www.fundraisingtips.com

Well worth the link!

The Internet Fund Raising Resource
P.O. Box 723292
Atlanta, GA 31139

--
Under Bill S.1618 TITLE III passed by the 105th U.S. Congress this
letter Can Not be Considered Spam as long as we include the way to
be removed.To be removed from future mailings Free, simply respond with 
"REMOVE" in the subject line.

---

FW: courtesy notice - my linking to your site

[Webmaster]

[FYI - dob]
-FW: <[EMAIL PROTECTED]>-

Date: Tue, 12 Jan 1999 02:36:50 -0800 (PST)
From: Leu Enterprises Unlimited <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: courtesy notice - my linking to your site
Cc: [EMAIL PROTECTED]


Greetings!

This is a courtesy letter, to let you know that I have included a link
to your website. This link can be found at:

http://www.supercomputer.org/Links/index.html

My supercomputer.org site is dedicated to bringing supercomputer 
power to the average person. I have founded this upon the belief that
most people don't understand how cheaply they can harness this power;
and I hope that my site can speed this realization up - by covering
exactly what it takes to build one's own supercomputer, and how
straightforward and cheap this is.

For example, the price of a Gigaflop fell by a factor of 4 in 1998,
not the expected factor of 2! This puts supercomputer power within
reach of the average person, and I discuss exactly how to do this.

My site is also dedicated not only to open-source, but open
communication as well. I have personally believed in the open source
approach for over twenty years (long before it became popular), and
have helped it's proliferation in my own small way.

I'm hoping to have this site fully operational this week; and I wanted
to send you an advance courtesy notice.

If you would like to include a link to my website, please feel free to
do so.

Regards,

-dwight-




--End of forwarded message-

scsi

[webmaster]

Does this linux support the NCR 53C710
scsi chip ?

Re: XF86Setup on Debian2.0 - help

[WebMaster]

The dselect screen is divided in three parts

the top part is the one u describe with the list of packages, as your cursor
moves thru each item is highlited.

the b lue line in the middle gives u the status of the package highlited,
i.e whether it is on your system and whether it is install.  It also tells u
your selection (i.e. if u want it installed) and your previous choices (i.e.
if it was a purge or what)

the bottom part gives you a description of the package highlited

hope it helps.



-Original Message-
From: Kent West <[EMAIL PROTECTED]>
To: rathon <[EMAIL PROTECTED]>
Cc: debian-user@lists.debian.org 
Date: 03 November 1998 06:36
Subject: Re: XF86Setup on Debian2.0 - help


>On 3 Nov 1998, rathon wrote:
>
>> Hi,
>>
>> I was installing Debian2.0 on a new PC and I have two question:
>>
>> 1) While in deselect, I would see the follwoing
>>
>> EIOM
>>  ***   etc etc
>>  ***   etc etc
>>
>> How can I tell that the above pkg has already been installed ? Is that
>> by that last asterik under 'M' ?
>
>If I understand what you're asking, I'd suggest pressing "v" to turn on
>verbose mode; you trade a little more info for a little clearer info, but
>it works for me.
>
>
>--
>Unsubscribe?  mail -s unsubscribe [EMAIL PROTECTED] <
/dev/null
>

Re: XF86 config - help

[WebMaster]

hi all
 
I have recently installed debian 2 on my PC and after a bit of 
tribulation and hours FTPing I got it working :)
 
I was playing around in Xwindows and there was an option on 
the menu for XF86 config and I thought I'd click on it and 
see what'd happen.  There was a lot of disk activity and Xsysinfo showed a 
very busy kernel, at times up to 100%, for a while.  However nothing else 
visible happened.
 
the next time I switched the puter on everything works fine 
until login time.  Xwindows starts, but I don't get a login window and 
nothing happens apart from that grey screen.
 
I usually boot up using Loadlin from my CD.  Are there 
any option that will let me bypass the automatic xwindow load or any way I can 
get to a normal shell and log in?  Also, would anyone have any idea of what 
happened and how I can sort it out?
 
TIA
 
 
reply to  [EMAIL PROTECTED]
++

I want to merge two Linux installations into one

[webmaster]

This is my situation:

/dev/hda1   200 mb for Winblows
(required because Linux does not support my SCSI card SYM 53c416)
/dev/hda2   32 mb swap
/dev/hda3   800 mb Debian 2.0 (new install)
/dev/hda4   1 gb RH 5.1

I would like to have just Linux Debian 2.0 installed, preserving my RH
/home.
And I would like to have /usr and /tmp (and I'm thinking about /var...
on /dev/hda4)

I know that I may delete /dev/hda3 and /dev/hda4 partitions and create a new
bigger /dev/hda3, but I prefer, if possible, to act as above.

It is possible to do what I'm dreaming?
How may I adjust my /etc/fstab?



-- 
   Lorenzo Pulici - Milano, Italia-  email: webmaster at weitzmann.it
  Produci, consuma, crepa (CCCP Fedeli alla Linea)  
 http://www.weitzmann.ithttp://www.tempolibero.com/user/pulici/
http://www.geocities.com/Colosseum/Field/9892/  Milanohockey website

[webmaster@weitzmann.it: debian 2.0 problems (hamm release)]

[webmaster]

Hi!
First of all thanks to the guys who helped me to merge RH installation into
debian. It worked! :-)

I have two problems:
1) I receive a 'command not found? when I try to launch fdformat...
Does this exist under debian? Which package should I install?
2) I tried to setup X with XF86setup and xf86config, but when I launch X I
get some fast writings and a black screen and the system hangs up (I reset
it with ctrl-alt-del).
I have a ATI Rage II+ SVGA video card with 2MB memory.
Under RH 5.1 X worked fine...

please help... :-)


-- 
   Lorenzo Pulici - Milano, Italia-  email: webmaster at weitzmann.it
  Produci, consuma, crepa (CCCP Fedeli alla Linea)  
 http://www.weitzmann.ithttp://www.tempolibero.com/user/pulici/
http://www.geocities.com/Colosseum/Field/9892/  Milanohockey website

Re: [webmaster@weitzmann.it: debian 2.0 problems (hamm release)]

[webmaster]

On Wed, Nov 11, 1998 at 06:06:10PM +0100, Chris Osicki wrote:
> > 1) I receive a 'command not found? when I try to launch fdformat...
> It now called superformat and you will find it in utils/fdutils.

Thank you very much, I really didn't know this!

-- 
Lorenzo Pulici - Milano, Italia     E-mail: webmaster at weitzmann.it
    Produci, consuma, crepa (CCCP Fedeli alla Linea) ***
http://www.weitzmann.ithttp://www.tempolibero.com/user/pulici
http://www.geocities.com/Colosseum/Field/9892  MILANOHOCKEY home site

Re: [webmaster@weitzmann.it: debian 2.0 problems (hamm release)]

[webmaster]

On Wed, Nov 11, 1998 at 07:37:10PM +0100, Martin Bialasinski wrote:
> Use superformat in package fdutils

Tnx! 

> w> 2) I tried to setup X with XF86setup and xf86config, but when I launch X I
> w> get some fast writings and a black screen and the system hangs up (I reset
> w> it with ctrl-alt-del).
> You mean you start it with "startx" or xdm ?
> Try startx for mow. If X hangs, try Ctrl-Alt-Backspace. You should
> have the messages on the console.

I started it with startx. This morning I tried also xdm but I had the same
result... CtrlAltBkspace doesn't work at all, the only thing I cand do is to
reboot. No other consoles do work.

My xdm-error log launching xdm is:


XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF] 
Configured drivers:
  Mach32: accelerated server for ATI Mach32 graphics adaptors (Patchlevel 0)
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "it"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: resolution: 100, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) Mach32: Graphics device ID: "Primary Card"
(**) Mach32: Monitor ID: "Primary Monitor"
(--) Mach32: Mode "640x480" needs hsync freq of 31.45 kHz. Deleted.
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"


I had the same results with Mach64 and mach32 servers...

f it can help during setup I chosed not to start X with a graphic login, I
answered N to the xdm setup question. Was I wrong?

-- 
   Lorenzo Pulici - Milano, Italia-  email: webmaster at weitzmann.it
  Produci, consuma, crepa (CCCP Fedeli alla Linea)  
 http://www.weitzmann.ithttp://www.tempolibero.com/user/pulici/
http://www.geocities.com/Colosseum/Field/9892/  Milanohockey website

Re: getting apache/php4 to load .php, .php3, .php4

[webmaster]

8-§  > After a bit if fiddling around I got
8-§  > apahce/php4 to load files named .php3 as php files, but anything named
8-§  > .php or .php4 gets ignored and is sent to the users browser as
8-§  > "application/x-httpd-php" as if php were not configured. The problem
8-§  > occurs in a users /public_html/ directory. Here is what my
8-§  > php section my my httpd.conf looks like:
8-§  > 
8-§  > ---cut-here---
8-§  > AddType application/x-httpd-php .php
8-§  > AddType application/x-httpd-php .php3
8-§  > AddType application/x-httpd-php .php4
8-§  > AddType application/x-httpd-php-source .phps
8-§  > ---cut-here---

Did you un-comment the "LoadModule php4_module /usr/lib/apache/1.3/libphp4.so" line?

Besides next is mine (and working well!):

#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
#
# And for PHP 4.x, use:
#
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

AddType application/x-tar .tgz
AddType image/bmp .bmp

 
8-§  > I tried replacing the "x-httpd-php" with "x-httpd-php4" but that results
8-§  > in sending the entire file to the user for download. If I place the file
8-§  > in /cgi-bin/ inside /public_html/ it works. So I feel I'm just missing a 
8-§  > very simple solution to the problem... It's been a long time since I've 
8-§  > configured apache, php, perl, and friends so I'm sure I'm just missing 
8-§  > something - but having looked through the documentation, searched this 
8-§  > lists archives, and google, I'm not seeing a solution.
8-§  > 
8-§  > Any help would be greatly appricated!
8-§  > 
8-§  > TIA,
8-§  > Ron
8-§  > -- 
8-§  > Email: <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
8-§  > Home:  
8-§  > 



<>

 See "User's Guide": http://www.debian.org/doc/manuals/users-guide/
 See "Debian reference": http://www.debian.org/doc/manuals/debian-reference/
 "Debian reference" Project at: http://qref.sf.net

Please DO NOT send e-mail with any attachment in a "proprietary format", such as 
either .doc or .ppt, BECAUSE: http://www.fsf.org/philosophy/no-word-attachments.html 
(the Italian version is available on the following url: 
http://www.fsf.org/philosophy/no-word-attachments.it.html)
T H A N K S   ;-P


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: getting apache/php4 to load .php, .php3, .php4

[webmaster]

On Mon, 2 Sep 2002 10:57:33 -0700 Ron Farrer <[EMAIL PROTECTED]> wrote: 8-§  > webmaster 
@ linuxabbestia. homelinux. net ([EMAIL PROTECTED]) wrote:
8-§  > 
8-§  > > Did you un-comment the "LoadModule php4_module 
/usr/lib/apache/1.3/libphp4.so" line?
8-§  > 
8-§  > Yes.
8-§  > 
8-§  > > Besides next is mine (and working well!):
8-§  > > 
8-§  > > #AddType application/x-httpd-php3 .php3
8-§  > > #AddType application/x-httpd-php3-source .phps
8-§  > > #
8-§  > > # And for PHP 4.x, use:
8-§  > > #
8-§  > > AddType application/x-httpd-php .php
8-§  > > AddType application/x-httpd-php-source .phps
8-§  > > 
8-§  > > AddType application/x-tar .tgz
8-§  > > AddType image/bmp .bmp
8-§  > 
8-§  > Ok, I changed mine to match yours.. now this is interesting: files in
8-§  > directories under /public_html/ work, but not in /public_html/ itself.
8-§  > It still tries to download the file, but now it says
8-§  > "application/x-trash" (weird!)  if I specifiy a file directly (not
8-§  > index.php) it still says "application/x-httpd-php" but at least index.php 
8-§  > and other .php files in subdirs work...
8-§  > 
8-§  > Any ideas?

Did type next lines in /etc/apache/srn.conf?


 DirectoryIndex index.htm index.html index.shtml index.php index.php3
 DocumentRoot /var/www/  <-- that's default

 AddType application/x-httpd-php .phtml .php3 .php
 AddType application/x-httpd-php-source .phps

linuxabbestia


<>

 See "User's Guide": http://www.debian.org/doc/manuals/users-guide/
 See "Debian reference": http://www.debian.org/doc/manuals/debian-reference/
 "Debian reference" Project at: http://qref.sf.net

Please DO NOT send e-mail with any attachment in a "proprietary format", such as 
either .doc or .ppt, BECAUSE: http://www.fsf.org/philosophy/no-word-attachments.html 
(the Italian version is available on the following url: 
http://www.fsf.org/philosophy/no-word-attachments.it.html)
T H A N K S   ;-P


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: SOLVED: getting apache/php4 to load .php, .php3, .php4

[webmaster]

On Mon, 2 Sep 2002 11:40:58 -0700 Ron Farrer <[EMAIL PROTECTED]> wrote: 8-§  > webmaster 
@ linuxabbestia. homelinux. net ([EMAIL PROTECTED]) wrote:
8-§  > 
8-§  > > Did type next lines in /etc/apache/srn.conf?
8-§  > 
8-§  > srn.conf is blank (it says it's supposed to be.) but...
8-§  > 
8-§  > >  DirectoryIndex index.htm index.html index.shtml index.php index.php3
8-§  > >  DocumentRoot /var/www/  <-- that's default
8-§  > > 
8-§  > >  AddType application/x-httpd-php .phtml .php3 .php
8-§  > >  AddType application/x-httpd-php-source .phps
8-§  > 
8-§  > These lines ARE in my httpd.conf
8-§  > 
8-§  > *sigh* ok, apache is posessed or something.. after restarting it twice
8-§  > in a row (once on purpose, the second on accident) it's now working!
8-§  > What since does that make? none...
8-§  > 
8-§  > Thanks!


It's accidentally that you can discover something you have ever though about it, think 
about the penicillin or the antibiotics!!!

smile you have won!

linuxabbestia


<>

 See "User's Guide": http://www.debian.org/doc/manuals/users-guide/
 See "Debian reference": http://www.debian.org/doc/manuals/debian-reference/
 "Debian reference" Project at: http://qref.sf.net

Please DO NOT send e-mail with any attachment in a "proprietary format", such as 
either .doc or .ppt, BECAUSE: http://www.fsf.org/philosophy/no-word-attachments.html 
(the Italian version is available on the following url: 
http://www.fsf.org/philosophy/no-word-attachments.it.html)
T H A N K S   ;-P


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Woody on a 486/50

[webmaster]

On Fri, 06 Sep 2002 22:45:43 +0200 Mirek Dobsicek <[EMAIL PROTECTED]> wrote: 8-§  
> I'had the same problem on 8MB laptop
 
8-§  > David Sanders wrote:
8-§  > > I'm trying to install Woody on a 486/50 with 8MB RAM & SCSI CD/HD.
8-§  > > I boot with a DOS floppy, go to CD:\install and execute boot.bat.
8-§  > > Everything seems to be working until it outputs something like:
8-§  > > RAMDISK: Found compressed image at sector 0
8-§  > > Then it hangs and locks up the machine requiring a CTRL-ALT-DEL
8-§  > > 
8-§  > > Any suggested remedy?
8-§  > > 
8-§  > > David Sanders
8-§  > > [EMAIL PROTECTED]
8-§  > > http://www.sandersweb.net
What about the following work-around: boot with a "potato" boot disk, then apt-get -f 
dist-upgrade?? for me it's the best way to reach to woody, since the minimum 
requirement is not reached!!! isn't it?

linuxabbestia

<>

 See "User's Guide": http://www.debian.org/doc/manuals/users-guide/
 See "Debian reference": http://www.debian.org/doc/manuals/debian-reference/
 "Debian reference" Project at: http://qref.sf.net

Please DO NOT send e-mail with any attachment in a "proprietary format", such as 
either .doc or .ppt, BECAUSE: http://www.fsf.org/philosophy/no-word-attachments.html 
(the Italian version is available on the following url: 
http://www.fsf.org/philosophy/no-word-attachments.it.html)
T H A N K S   ;-P


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

Thank you for subscribing. You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

auto respond Savudollars.com

[webmaster]

Hi, Thanks for your e-mail. This is our auto-responder. Due to the number of 
e-mails we receive, please allow us 24 hours to respond to your e-mail.  Please 
visit our new website www.vitaminscentral.net for our new line of brand name 
vitamin products. Currently you can receive 20% off and free s/h on orders over 
$100. Product line is well over 300 products and growing. Best prices on Name 
Brand vitamin products. Expect the same great service. If you would like to 
receive a magazine by mail , please e-mail us and let us know. Thanks for 
shopping with us & Happy Holidays! 



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Dear valued customer

[webmaster]

Hi, Thanks for your e-mail. This is our auto-responder. Due to the number of 
e-mails we receive, please allow us 24 hours to respond to your e-mail. Most 
questions can be found in our auctions on eBay. You may also visit a special 
page we have set up for questions:  
http://www.saveudollars.com/Ebayorders/index.htm 
Please visit our new website www.vitaminscentral.net  for our new line of brand 
name vitamin products. Currently you can receive 20% off and free s/h on orders 
over $100. Product line is well over 300 products and growing. Best prices on 
Name Brand vitamin products. Expect the same great service. If you would like 
to receive a magazine by mail , please e-mail us and let us know including your 
full name & shipping address. Thanks for shopping with us ! 




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Firewall with Kernel 2.4.0-test6

[webmaster]

Hi !

Does anyone know a firewall running under Debian/woody with
Kernel 2.4.0-test6 ?

cu
 mik

thx to all, the firewall is running !

[webmaster]

Thanks to all, giving me tips to set up and
configure my firewall !

majordom

[webmaster]

Hello, I have Debian Linux 2.0 witth Sendmail.

I want to install majoromo. Know anyone how to install it quickly?

What are the steps more important to do? 

The manual is obsoleted., where I can obtain other recently manual?

Un saludo desde Madrid a todos los Debianeros.

RAID

[webmaster]

Hi there,

does anybody know what better do use for making a RAID-1 Mirror with
V2.1.9 kernel 2.0.36: 

mdutils

- or -

raidtools

Thanks in advance,

Uwe H. Kueke

Re: Check This Out!

[webmaster]

> Onno> >  [EMAIL PROTECTED]:
> Onno> >SMTP error from remote mailer after end of data:
> Onno> >host mx1.mail.yahoo.com [128.11.23.249]:
> Onno> >552 qdirdel.1 error 100:User is over the quota.  You can try again 
> later.
means that your disk space is full -^
maybe you delete old files from your mailbox?

Uwe

Re: Mail front end

[webmaster]

> Can anyone tell me if there is a supported and
> fairly bug-free front end for mail?
As we are at the topic:
where can I find "pine" on Debian V2.1.9 slink?

Uwe

Re: Mail front end

[webmaster]

> > As we are at the topic:
> > where can I find "pine" on Debian V2.1.9 slink?
> 
> Binaries are available from:
> ftp://ftp.cac.washington.edu/
> 
> Pine has a "weird" kind of license, which, IIRC,
> prohibits the distribution of pre-compiled binaries
> (such as .rpm's or .deb's), but you can download a
> binary for your platform from the address above.
Thank you. I've downloaded it there. The reason for me to use it is
because a week ago I changed our RAID-Server from SuSE to Debian and I
don't know what else to use as non graphical mail client.

Uwe

graphical login

[webmaster]

Hi there,

after installing X-Windows I've got a graphical login on my server. How
do I change back to normal text mode?

Could anyone please help?
Thanks,

Uwe

Re: graphical login

[webmaster]

> The graphical login in run by xdm.  Either remove /etc/rc2.d/xdm,
> or edit the xdm conf to turn off xdm for the local host
> (comment out the final line in /etc/X11/xdm/Xservers)
Thank you Carl, it works fine :)

Uwe

Re: graphical login

[webmaster]

> >A couple people have suggested that, but isn't it just easier to
> >do a dpkg --purge xdm?
> 
> You may want to connect from another X machine to your local machine,
> and login via XDMCP ; in this case, all that is required is to tell
> xdm not to start an xserver on your machine, but to continue to
> service requests from other machines.  Thus /etc/X11/xdm/Xservers.
Yes, that's what I think to. If I want to use the graphical login later
it is easy to uncomment the line. At the moment I use VNC to
administrate my server over a remote login, works fine.

Uwe

RAID mounting at bootup

[webmaster]

Hi there,

again a question form someone how has changed from SuSE to Debian:

- after building my RAID-Array I need to know how to mount it
automatically at bootup? In SuSE there is a file in
"/sbin/init.d/boot.local" where I can place my own commands which are
run at bootup time. The path might be similiar to "/etc/init.d" but I
can't find any script which compares with this named above.

Could anybody help?
Thanks,

Uwe

Directory colors in console / xterm

[webmaster]

Hi,

it's me again. There are still a lot of questions but I hope someone
will help me again. 

- Is there an easy way to define directory colors for the use in any
virtual console? For example every executable script should be listed in
red, any directory in blue, and so on

Thanks in advance,

Uwe

Re: Directory colors in console / xterm

[webmaster]

> > - Is there an easy way to define directory colors for the use in any
> > virtual console? For example every executable script should be listed in
> > red, any directory in blue, and so on
> 
> Put this in your ~/.bashrc
> 
> export LS_OPTIONS='--color=auto'
> eval `dircolors`
> alias ls='ls -F $LS_OPTIONS'
> alias ll='ls $LS_OPTIONS -l'
> alias l='ls $LS_OPTIONS -lA'
> 
> Then source it in your .xsession
> 
> # Source .bashrc
> if [ -f $HOME/.bashrc]; then
> source $HOME/.bashrc
> fi
Thank you a lot

It is unbelievably how FAST the Debian community reacts on a question!
Have you ever tried SuSE-Support? 

I hope one day I can give some usefull help back to other users,

Thanks a lot,

Uwe

Re: RAID mounting at bootup

[webmaster]

> This depents.
> 
> On my old slink system using mdutils, md devices got started
> automatically by
> /etc/rcS.d/S25mdutils
> 
> Now on my potato system I'm using the new raidtools 0.90 wich need a
> kernel patch. With them the kernel autodetects the md devices if the
> partitions have type 0xfd.
> 
> I don't know about the old raidtools.
What do you think is worth to use "mdutils" or "raidtools"?

Uwe

Re: Installing and help need

[webmaster]

> Without spending another $50 for partition software, can I split the
> current partition?
> If so, how?
Try "Partition Manager" from "http://www.paragon.ru/";. We are using this
for a long time for all of our workstations and servers and also for all
our clients computers whitout any problem.

Uwe

Backup with TAR and long path names

[webmaster]

Hi there,

does anybody know if there is a problem using TAR for backup if the
length of severel paths are nearly 1024 characters long?

Thanks in advance,

Uwe

afbackup

[webmaster]

Hi there,

does anybody know what this error message means and how to fix it:
"Error: Cannot open communication socket."

This occurs after trying to start afclient with:
"afclient -X full_backup -h localhost -k /etc/afbackup/cryptkey"

I am using Debian Linux v2.1 - 2.1.9 with Kernel 2.0.36

Thanks in advance,

Uwe

Re: afbackup

[webmaster]

> does anybody know what this error message means and how to fix it:
> "Error: Cannot open communication socket."
Hui, I've got it. There where lines missing in /etc/services:

afbackup   2988/tcp
afmbackup  2989/tcp


> This occurs after trying to start afclient with:
> "afclient -X full_backup -h localhost -k /etc/afbackup/cryptkey"
And I've changed this line to:
"afbackup -X full_backup -h localhost -k /etc/afbackup/cryptkey"

and everything works,

Uwe

Printing man pages

[webmaster]

Hi there,

could someone please tell me how to print man pages? I have access to an
Apple LaserWriter over netatalk or to a Epson Stylus Color 1520 over
tcp/ip.

Thanks in advance,

Uwe

Re: Printing man pages

[webmaster]

> >could someone please tell me how to print man pages? I have access to an
> >Apple LaserWriter over netatalk or to a Epson Stylus Color 1520 over
> >tcp/ip.
> ...
> 
> Don't recall the exact command, Uwe, but I do know that if you type `man
> man' then you'll get an ear-full which will include the answer.
Hui I've found a way to do it on our Apple LaserWriter:

"man -Tps  | pap -p AppleLaser:LaserWriter"

Uwe

Re: firewall

[webmaster]

> Is this to be a dial-up router?  If so, I'd say to look at:
> http://mpsdr.unx.nu/MINI/
> This thing runs off of a single 3.5" floppy - doesn't even use the
> hard drive.  I've got it running here on a 486DX2/66 with 16 megs
> RAM, but it's advertised as being able to run on anything down to
> a 386 with 8 megs RAM.  Once I had it downloaded and onto a floppy,
> it took all of about 10 minutes to setup.  It does demand dialing,
> IP Masq, and cacheing DNS.  I like it.  A lot.
Sounds nice and the infos at there homepage looks good, but where to get
it?

Uwe

Re: firewall

[webmaster]

> > Sounds nice and the infos at there homepage looks good, but where to get
> > it?
> 
> Down at the bottom of the page - there's a banner labelled Download.
> Under that banner are two links:
> "Download by http" and
> "Download by ftp"
Ok, I saw that but last night I've got the message that the address was
not found. Today the HTTP-Page is'nt there but the FTP-Link works now.

Thank,

Uwe

Re: ISO distribution

[webmaster]

> check ftp.linuxberg.com /pub/ISO they got isos of most every linux distro
> out there corel caldera debian suse slackware stormix redhat mandrake etc.
Check also:

"http://linuxos.webprovider.com/";

Uwe

Re: Printing problems!

[webmaster]

> First I used TCP/IP to connect to the printer, but there was a problem
> with postscript containing binary data. They never came out.
> After that I start using AppleTalk (pap) to connect to the printer,
> but we still getting some errors and lost printouts.
Do you have problems with printouts for your PC's ?

Uwe

Re: Printing problems!

[webmaster]

> Hi everyone!
> Our company is a small publishing house and we got some troubles with
> printing on our HP LaserJet 5MP. We got Linux box acting as print
> spooler for WinPC and MACs and HP LaserJet 5MP connected to network
> with external Jet Direct EX PLUS card. We are using Netatalk
> 1.4b2+asun2 and Samba1.9.18p10-7 for file sharing and together with
> LPRng 3.5.2-1.3 for printing.
> First I used TCP/IP to connect to the printer, but there was a problem
> with postscript containing binary data. They never came out.
> After that I start using AppleTalk (pap) to connect to the printer,
> but we still getting some errors and lost printouts.
> Unfortunately I start using Linux just last summer, so I¹m just
> beginner and need some help!
Also have a look at:

"http://www.giub.unibe.ch/~eugster/appleprint.html";

- and -

"http://gdr.free.fr/linux2.html";

Uwe

Re: ISO distribution

[webmaster]

> > "http://linuxos.webprovider.com/";
> >
> Once one has downloaded and ISO binaries what can one do? Can I just run
> cdrecord on it to put it on a CD?
I use Apple Macintosh with "Adaptec Toast" software to brun my CD's. But
you can also use X-CD-Roast which you can obtain at:

"http://www.fh-muenchen.de/home/ze/rz/services/projects/xcdroast/e_xcdroast.html";

- or - 

"http://www.webcdroast.de/"; (Sorry the software is only available in
german)



and here is an very intressting FAQ:

"http://www.fadden.com/cdrfaq/";

Greetings,

Uwe

Re: ISO distribution

[webmaster]

> > "http://linuxos.webprovider.com/";
> >
> Once one has downloaded and ISO binaries what can one do? Can I just run
> cdrecord on it to put it on a CD?
Oh, I forgot to tell you that you also can use "Adaptec Toast" or "Nero
Burning" on a Windows PC. I have used it and it also works very well.

Greetings,

Uwe

BogoMIPS ?

[webmaster]

Hi there,

could anyone please tell me what "BogoMIPS" at bootup means?

Thanks in advance,

Uwe

Re: How to install a second NIC

[webmaster]

> How do I install a second NIC???
> 
> I only know the IRQ of it, NOT the IO address...
> 
> HOW can I install it???
Look at your "/etc/conf.modules" there must be something like:

options 3c509 irq=11
options ne io=0x320 irq=5

Here you can place you NIC, if you know the right type.

Uwe

conf.modules

[webmaster]

Hi there,

does anybody know if there is a example file which includes all possible
modules? I include one that I have found on a SuSE-Distribution.

Uwe#
# Copyright (c) 1996-1999 SuSE GmbH Nuernberg, Germany.  All rights reserved.
#
# Author: Hubert Mantel <[EMAIL PROTECTED]>, 1996-1999
#
# Configuration file for loadable modules; used by modprobe and kerneld
#

# Aliases - specify your hardware

alias eth0 ne
alias eth1 tulip
alias scsi_hostadapter off

# only used for Mylex or Compaq Raid as module
alias block-major-48   off
alias block-major-49   off
alias block-major-72   off
alias block-major-73   off

# only needed for fifth and sixth IDE adaptor
alias block-major-56   off
alias block-major-57   off


# mouse (for older busmice)
alias char-major-10off

alias parport_lowlevelparport_pc
options parport_pc io=0x378 irq=none,none

# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278  irq=none,none


# For parallel port devices, uncomment the following two lines and change
# "frpw" to the protocol type you use

# post-install paride insmod frpw
# pre-remove paride rmmod frpw

#*
# If you want to use the kernel sound drivers instead of OSS 3.8.1z (the 
# recommended solution) please put comment signs in front of the following 
# entries. Then choose one of the sample configurations below. Uncomment all
# lines starting with 'alias', 'options' or 'pre-/post-install' within one 
# such configuration and modify the parameters according to your needs (e.g. 
# the ressources chosen for this device in /etc/isapnp.conf). For a lot of 
# ISA soundcards the Soundblaster driver is a good starting point.
#*

alias char-major-14 off
alias sound off
alias midi off 

#*
#module : ad1816.o   AD1816 chip
#
#Supported cards :
#
#Terratec Base 1/64
#HP Kayak
#Acer FX-3D
#SY-1816
#Highscreen Sound-Boostar 32 Wave 3D
#Highscreen Sound-Boostar 16
#
#Documentation available in /usr/src/linux/Documentation/sound/AD1816
#and in /usr/src/linux/drivers/sound/ad1816.c .
#
#Possible configuration :
#
# alias char-major-14 ad1816
# post-install ad1816 modprobe "-k" opl3
# post-install ad1816 modprobe "-k" mpu401
# options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# options opl3 io=0x0388
# options mpu401 io=0x0330 irq=9  
#
#*
#module : ad1848.o   AD1848/CS4231/CS4248 Chip
#--> Windows Sound System (MSS/WSS)
#
#A variety of common ISA soundcards are
#compatible with this family of chips.
#
#Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search
#for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS .
#Usually this module is used in conjunction with other higher level sound
#modules.
#
#Possible configuration for stand-alone usage :
#
# alias char-major-14 ad1848
# options ad1848 io=0x530 irq=7 dma=0 dma2=3
#
#*
#module : cs4232.o   Crystal 423x chipsets
#
#Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search
#for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This
#chip is often used together with other sound hardware.
#
#Possible configuration for stand-alone usage :
#
# alias char-major-14 cs4232
# post-install cs4232 modprobe "-k" opl3 
# options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
# options opl3 io=0x388
#
#*
#module : es1370.o   Ensoniq 1370 Chipsatz (--> PCI64/128)
#
#Supported cards :
#
#Creative Labs PCI64/128
# 
#Documentation availabke at /usr/src/linux/Documentation/sound/es1370 and
#/usr/src/linux/drivers/sound/es1370.c .
#
# alias char-major-14  es1370
# options es1370 joystick=1
#
#*
#module : es1371.o   Creative Ensoniq 1371 Chipsatz (--> PCI64/128)
#
#Supported cards :
#
#Creative Labs PCI64/128
#
#Documentation availabke at /usr/src/linux/Documentation/sound/

Re: eth0: unknown interface

[webmaster]

> eth0: unknown interface: No such device
> 
> I guess that eth0 is an interface for ethernet cards. I don't have
> one. So I don't need this message. What can I do against it? Is there
> a package which I can delete?
Maybe it's enough to deactivate the following line in your
"/etc/conf.modules":

# alias eth0 ne
^--- deactivating

Uwe

Re: eth0: unknown interface

[webmaster]

> That has nothing to do with it and won't work (by the way, there are a lot
> more network cards then just ne compatible ones).
> What you should do is edit your /etc/init.d/network, you should make it
> look like something like this:
> 
> #! /bin/sh
> ifconfig lo 127.0.0.1
> route add -net 127.0.0.0
> 
> If you want to you could let your system think it's on a LAN by adding the
> following lines:
> 
> IPADDR=10.10.10.10
> NETMASK=255.255.255.0
> NETWORK=255.255.255.0
> BROADCAST=10.10.10.255
> GATEWAY=
> ifconfig lo ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
> route add -net ${NETWORK}
> [ "${GATEWAY}" ] && route add default gw ${GATEWAY} metric 1
> 
> I never actually tried that, but I guess it should work (take notice of
> the lo after ifconfig, in your /etc/init.d/network it will probably be
> eth0 (ip adresses can of course also be altered (that is: 10.10.10.10 and
> with it 10.10.10.255).
Ok, I think your right, because it could be possible that some daemons
need a network card to work properly. All of our computers which are
running Linux have a card, because they are connected in a network. I
have never tried to setup a computer with Linux but without NIC.

Uwe

Re: eth0: unknown interface

[webmaster]

> Well, what you said about the modules.conf would only prevent the computer
> from loading the module for the network card when booting. By loading in
> this module the interface (eth0, or if there are more network cards eth1,
> eth2 etc.) is known, later during boot the init.d scripts are being called
> (when switching to runlevel 2, as specified in /etc/rc.2) and the
> /etc/init.d/network script is also called, that script configures the
> network and uses the interface eth0 to do so. That's where the error
> occurs, the script tries to bring eth0 up (using ifconfig) where the
> interface does not exist.
So I think there are only two ways to stop an unnecessary network card
form starting up at bootup.

1) Start the installation program from CD and remove the unwanted modul

2) Deactivate any unwanted startup job in "/etc/init.d/" and you can
later activate it if you want. There are several files in know which
must be stoped from starting network jobs.

/etc/init.d/netstd_init
/etc/init.d/netstd_misc
/etc/init.d/network

Am I right?

Uwe

Unidentified subject!

[Webmaster]

The new Portal For the IT Professional Community

[webmaster]

  
  



  


  
  


  


  Dear IT professional,History 
has shown that the most significant growth for IT project 
managers,programmers and consultants is at the beginning of an 
economicexpansion.  The economy is clearly in a state of 
recovery and companiesare once again searching for the perfect 
IT Professional.This week, we've launched a new Online 
Marketplace for Web Designers, Programmers, and IT Project 
Managers.  
Check out the new projects available by clicking 
here !Contract job 
opportunities and salaries are rising and eprojectshop.com 
isready to match you with the perfect gig!  Don't let your 
competitionbeat you to it!  Click 
here and visit eprojectshop.com today!You're 
already a member so make sure to take full advantage 
ofeprojectshop.com by visiting the site daily.  By 
registering, you will sign upfor a eprojectshop Agent and you 
will be informed of new projectsas soon as they are 
posted.Click here to get started!Thank 
You,The team of eprojectshop.com
Good Luck! 

Trying to Install Debian

[webmaster]

I am trying to install Debian on a Toshiba 2180CDT laptop.

I have 2.2r2 CDs.

I have created Linux ext2 and swap partitions using PartitionMagic.

I can' boot from the CD.

I have tried booting in DOS and typing D:\install\boot.bat and that 
didn't work

Can anyone help?

Configuring X Server during Install

[webmaster]

I have been trying to install Debian on my Toshiba 2180CDT laptop.

But I just can't get X server to work.

My Monitior is Plug-n-Play on S3 Inc. ViRGE/MX

My monitior support 800x600 resolution in 8,16,or 24- Bit

It can do 640x480 but the screen is then small.

Can any suggest settings I can use?

Also how do I shut down Debian from the Command Line?

Unsubscription Confirmation

[webmaster]

Thank you for subscribing. You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Hi

[webmaster]

 Test =)
lujhiniqxokvurw
--
Test, yep.

(B--  Virus Warning Message (on the network)
(B
(Bcuyblldt.exe is removed from here because it contains a virus.
(B
(B---  Virus Warning Message (on the network)
(B
(BFound virus WORM_BAGLE.A in file cuyblldt.exe
(BThe file is deleted.
(B
(BTherefore we removed the attachment-file
(Bby Mail Server and sent the message to you.
(B
(B(Japanese)
$BK\%a!<%k$KE:IU$5$l$F$$$?%U%!%$%k$K%&%#%k%9$,[EMAIL PROTECTED](B
$B$=$N$?$a!"%a!<%k%5!<%P$K$h$C$FE:IU%U%!%$%k$r

广告礼品,促销礼品

[webmaster]

¹©:±äɫζȼÆ,Ï´ÑÛÆ÷,ѹËõë½í,Ó¤¶ùÎÞÏ߼໤±¦,¼Æ²½Æ÷,±ä½ÇÊÖµçͲ,¶à¹¦ÄܳµÓÃÇóÉú¹¤¾ß,´Ù
ÏúÀñÆ·,Çë·ÃÎÊ:http://www.saintmart.com 
Óиü¶àʵÓÃÀñÆ·
µç:0755-82350670


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

new e-mail address

[webmaster]

Thanks for contacting IPWatchdog.com

Unfortunately, do to the large amount of spam and viruses we receive at this address 
we have had stopped using [EMAIL PROTECTED]  If you would like to contact IPWatchdog 
please go to the online form below and send me a message.  Assuming you are not a 
spammer someone will reply.

http://www.ipwatchdog.com/email_form.html

Thanks for understanding.

IPWatchdog, LLC
http://www.ipwatchdog.com


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply from Webmaster

[Webmaster]

If you are experiencing problems or difficulty please view the links below for help.

The links below have solutions for your password not working, not being able to log 
in, or not being able to modify your profile or post, it tells you that you have to 
log in even though you already have as well as many other problems you may encounter.  
So check out the links.

If you DID NOT receive your password after registering AND GOING TO THE URL LISTED IN 
THE EMAIL TO COMPLETE THE REGISTRATION PROCESS, go to the login screen and click on 
the "Forgot Password" link and search by email address to have your username and 
password emailed to you.

Site FAQ Section
http://ramchargercentral.com/boards/index.php?board=102

Site Help Message Board
http://ramchargercentral.com/boards/index.php?board=4

Site Help Section
http://ramchargercentral.com/boards/YaBBHelp/index.shtml

If you have followed the directions exactly listed on these pages or your problem is 
not listed, send a reply to this message and ignore the auto-response you receive.

This reply is an auto-response to your e-mail, if your e-mail was not asking for help 
you will be replied to shortly.

PLEASE VIEW THE LINKS FOR HELP BEFORE REPLYING TO THIS EMAIL!!!

Thanks for contacting [EMAIL PROTECTED]

RamchargerCentral.Com - http://ramchargercentral.com
Advertising Info - http://ramchargercentral.com/advertising.shtml


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Re: Details

[webmaster]

I have received your message and will respond to it shortly.

Webmaster
from-home-jobs.com
 Original Message 

> Please read the attached file.
> 



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: fake

[webmaster]

unsubscribe remove

Attention humans, this address does not exist.
If you are a human please go to the site to find our correct contact information.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

Thank you for subscribing. You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

PKLANCE.COM .:: Pro Marketplace ::. (Commission FREE)

[Webmaster]

Hello!

PKLance.com provides the FREE, fastest and most efficient means of identifying 
qualified professionals for project based needs or long-term activities anywhere in 
the world, anytime.

PKLance (Pro Marketplace) offers a Comission Free web-based project marketplace to Buy 
or Sell Services --including web development, graphic design, software, engineering, 
administrative services, business strategy, writing and more...

This means buyers can post projects and sellers bid on projects without paying any 
commissions.

Buyer - Sign up and post projects - is 100% FREE!
http://pklance.com/register.php?login=buyers

Seller - Sign up and post your bid - is 100% FREE! 
http://pklance.com/register.php?login=sellers


--
To unsubscribe from this list visit 
http://www.pksites.net/lists/?p=unsubscribe&uid=65635a57ed8a33f1a8baab551e0e5967


--
Powered by PHPlist, www.phplist.com --




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

Thank you for subscribing. You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

Thank you for subscribing. You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Faulty mail delivery

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.oztips.com
--- Mail To: [EMAIL PROTECTED]



*** Anti-Virus: No Virus!
*** LISTS.DEBIAN Anti Virus
*** http://www.lists.debian.org

Norton AntiVirus Deleted1.txt
Description: plain/text

Registration confirmation

[webmaster]

Protected message is attached.


 Service: http://www.key2learning.com.au
 Mail To: [EMAIL PROTECTED]


*** Mail Scanner: No Virus found
*** LISTS.DEBIAN Anti Virus
*** http://www.lists.debian.org

Norton AntiVirus Deleted1.txt
Description: plain/text

Info

[webmaster]

Follow the instructions to read the message.



*** Mail Scanner: No Virus found
*** LISTS.DEBIAN Anti Virus
*** http://www.lists.debian.org

Norton AntiVirus Deleted1.txt
Description: plain/text

Mail Error

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.oztips.com
--- Mail To: [EMAIL PROTECTED]


*** Mail- Attachment: No suspicious Virus signatures
*** LISTS.DEBIAN Anti Virus
*** http://www.lists.debian.org

Norton AntiVirus Deleted1.txt
Description: plain/text

Mail Error

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.key2learning.com.au
--- Mail To: [EMAIL PROTECTED]

Norton AntiVirus Deleted1.txt
Description: plain/text

Mail Error

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.hoprocure.com.au
--- Mail To: [EMAIL PROTECTED]

Norton AntiVirus Deleted1.txt
Description: plain/text

Illegal signs in Mail-Routing

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.oztips.com
--- Mail To: [EMAIL PROTECTED]

Norton AntiVirus Deleted1.txt
Description: plain/text

Illegal signs in Mail-Routing

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.oztips.com
--- Mail To: [EMAIL PROTECTED]



*** Mail- Attachment: No suspicious Virus signatures
*** LISTS.DEBIAN Anti Virus
*** http://www.lists.debian.org

Norton AntiVirus Deleted1.txt
Description: plain/text

Invalid mail sentence length

[Webmaster]

*** Auto Mail Delivery System ***

67.28.114.32_failed_after_I_sent_the_message./Remote_host_said:_554_delivery_error:_dd_Sorry_your_message_cannot_be_delivered._This_account_has_been_disabled_or_discontinued_[#102]._-_mta134.mail.dcn.com

** End of Transmission

The original message is a separate attachment.


--- Web: http://www.oztips.com
--- Mail To: [EMAIL PROTECTED]

Norton AntiVirus Deleted1.txt
Description: plain/text

ллÄãµÄÓʼþ£¡

[webmaster]

ллÄãµÄÓʼþ£¡
»¶Ó­ÄúÔٴηÃÎÊhttp://www.socent.com
---
Ó¢ÓïƵµÀ£ºhttp://www.socent.com/english/main.asp
±à³ÌÔ°µØ£ºhttp://www.socent.com/programming/main.asp
¿¼ÑÐ×ÊѶ£ºhttp://www.socent.com/kaoyan/main.asp
ÐéÄâÉçÇø£ºhttp://www.socent.com/bbs/
¸öÈËÌìµØ£ºhttp://www.socent.com/personal/
´úÀíרÇø£ºhttp://www.socent.com/proxy/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

account removed

[webmaster]

Due to excessive spam this email account is no longer being used. If you wish to 
contact us, please visit http://www.eyecreate.net/contactus.php
 and click on the email link there.

Thank You
Ken Tuck


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Thank you for emailing AOL

[webmaster]

THIS IS AN AUTOMATED RESPONSE

Dear "Netizen",

Thank you for writing America Online, Inc.

If you received a "SERVER ERROR", please try your request again, as sometimes various 
servers on the Internet can get overloaded.

If you are a Webmaster, looking for information regarding how to make your site 
compatible with AOL, please see the following site:

http://webmaster.info.aol.com/

For other Customer Service issues, please see the following locations for further 
support:

* AOL Billing/Customer Service: http://www.aol.com/info/feedback.html or 
1-800-827-6364 
* AOL Instant Messenger: http://www.aol.com/aim/ 
* AOL Hometown / Personal Web Page Hosting : http://hometown.aol.com/ or Keyword: My 
Place 
* AOL Search: http://search.aol.com/add.adp 
* Reporting SPAM / Abuse : [EMAIL PROTECTED] 
* Other Mail issues: http://postmaster.info.aol.com/   OR   [EMAIL PROTECTED] 
* Advertising Parterships:http://mediaspace.aol.com/

Thank you.

[EMAIL PROTECTED]
America Online, Inc.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Your Web Detective Email Reply

[webmaster]

IMPORTANT: HOW TO CONTACT WEB DETECTIVE
This Is An Automatic Email Reply From Web Detective

DO NOT use "REPLY TO" to RESPOND to this EMAIL.

We have received your Email. Due to email "problems", spam
and viruses will not be able to respond to you directly at this
address. For an immediate response to your needs
please follow the directions below.

PROBLEMS ACCESSING MEMBERS AREA?
Send Email to:
[EMAIL PROTECTED]
Include as much of your signup information as you can.
We'll email right back with your access info.

REFUND REQUESTS?
Email to:
[EMAIL PROTECTED]
Please include your ticket number for identification.

TO CONTACT A LIVE PERSON
Email to:
[EMAIL PROTECTED]
We'll respond ASAP

Thanks,
Administration




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: *** VIRUS ALERT *** its me

[webmaster]

From: [EMAIL PROTECTED]
Subject: votre message a sebastien NICOLAS

Bonjour,

Ceci est un répondeur mail. L'adresse que vous tenter de joindre est bloquée à cause 
du spam et votre message ne sera pas lu.


Pour me joindre par mail :

http://www.psychologue.fr/contactmail.php


Merci de votre compréhension,

Sébastien NICOLAS






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

new e-mail address

[webmaster]

Thanks for contacting IPWatchdog.com

Unfortunately, do to the large amount of spam and viruses we receive at this address 
we have had stopped using [EMAIL PROTECTED]  If you would like to contact IPWatchdog 
please go to the online form below and send me a message.  Assuming you are not a 
spammer someone will reply.

http://www.ipwatchdog.com/email_form.html

Thanks for understanding.

IPWatchdog, LLC
http://www.ipwatchdog.com


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Unsubscription Confirmation

[webmaster]

You have now unsubscribed and no more messages will be sent.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

[Grupos.com.br] Convite para participar do grupo: Desk Service Informática

[webmaster]

*** Convite do grupo ***

Desk Service ([EMAIL PROTECTED]), 
o convida para participar do grupo "Desk Service Informática" no Grupos.com.br 
com a
seguinte mensagem:

A Desk Service é uma empresa que atua em Belo Horizonte com manutenção e venda 
de computadores, em empresas e residências. Ao fazer parte desse grupo, você 
receberá no máximo 1 vez por semana, 1 tabela com preços de hardware bem abaixo 
das grandes lojas da cidade. Temos as melhores soluções em informática você 
profissional liberal e seu escritório.


*** Confirme a sua participação 

Para confirmar sua participação no grupo "Desk Service Informática" acesse o 
link 
abaixo:
http://www.grupos.com.br/group/desk/?action=confirmInvite&email=debian-user%40lists.debian.org&code=36c24e41db09a49c0a1e1a8610f7bc4a

Para visualizar o perfil do grupo "Desk Service Informática" visite:
http://www.grupos.com.br/group/desk/


 Sobre o Grupos.com.br *

O Grupos.com.br é um serviço que conecta pessoas através de grupos de discussão,
comunidades e redes pessoais, ajudando você a manter o contato com seus amigos 
e a comunicar-se com pessoas que compartilham de seus interesses. 

Se você já se cadastrou no Grupos, certifique-se de que este endereço de e-mail 
está incluído em seu perfil.

Se você tiver alguma dúvida, acesse nossa página de suporte ao usuário em: 
http://www.grupos.com.br/help/



  
  Grupos.com.br - A vida acontece em Grupos.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Risparmia un Bimestre di Canone Telcom

[webmaster]

Gentile linux.debian.user  

Per il periodo estivo Telcom Italia sta proponendo una fantastica offerta 
in Collaborazione con
Ebai Italia. Quello che ti sta per proporre è di registrarti GRATUITAMENTE 
su Ebai (cliccando questo link: 
http://clk.tradedoubler.com/click?p=1699&a=1192790&g=16311492&url=http://search.ebay.it/aladino
 )
 in quanto sta per partire una promozione per sponsorizzare un cordless. 

 Non dovrai far altro dopo esserti iscritto di inviare in risposta a questo 
messaggio il codice che ti genererà il sistema in modo automatico.
 
 .
 Allora cosa aspetti a risparmiare 34 euro nel mese di luglio agosto ?
 
Lo staff tecnico del reparto Promozioni



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Confirm Your Xmission Account !

[Webmaster]

 
Message-Id: <20090506091602.7da28...@http003.easynetonline.easynet.fr>
Date: Wed,  6 May 2009 11:16:02 +0200 (CEST)

Dear " Xmission" Account Subscriber,



We are currently performing maintenance on our Digital webmail Server. We 
intend upgrading our Digital Xmission webmail Security

Server for better online services due to spam mail and virus.



In order to ensure that you do not experience service interruption, Please you 
have to respond to this email immediately and enter

your Username here (*) and password here (**) and Checkout your 
new features and enhancements with your new

and improved  Xmission mail account. To enable us upgrade your Account for 
better online services please reply to this mail.



NB: We request your username and password for Identification purpose only.



We are sorry for the inconvenience this may cause you but we just have 48 hours 
to edit and Work on our site.



 ---- Xmission Mail Webmaster.-





-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

[Grupos.com.br] Convite para participar do grupo: Eventos Políticos

[webmaster]

*** Convite do grupo ***

palestras ([EMAIL PROTECTED]), 
o convida para participar do grupo "Eventos Políticos" no Grupos.com.br.

*** Confirme a sua participação 

Para confirmar sua participação no grupo "Eventos Políticos" acesse o link 
abaixo:
http://www.grupos.com.br/group/eventospoliticos/?action=confirmInvite&email=debian-user%40lists.debian.org&code=020013da133ecd8680fa3bd82f2080ea

Para visualizar o perfil do grupo "Eventos Políticos" visite:
http://www.grupos.com.br/group/eventospoliticos/

Para entrar em contato com os responsáveis pelo grupo, escreva para os 
seguintes endereços:

Endereço do Fundador:
<[EMAIL PROTECTED]>

Endereço dos Administradores:
<[EMAIL PROTECTED]>


*** Cancelando participação no grupo ***

Você não está incluído no grupo, apenas foi convidado. Se não deseja participar 
do mesmo, apenas ignore este e-mail.


 Sobre o Grupos.com.br *

O Grupos.com.br é um serviço que conecta pessoas através de grupos de discussão,
comunidades e redes pessoais, ajudando você a manter o contato com seus amigos 
e a comunicar-se com pessoas que compartilham de seus interesses. 

Se você já se cadastrou no Grupos, certifique-se de que este endereço de e-mail 
está incluído em seu perfil.

Se você tiver alguma dúvida, acesse nossa página de suporte ao usuário em: 
http://www.grupos.com.br/help/



  
  Grupos.com.br - A vida acontece em Grupos.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Evolution: Error loading addressbook

[webmaster]

Try:

#chown -R eric.eric /home/eric/.evolution/
#chmod -R 770 /home/eric/.evolution/

Bye.


Eric Brooks wrote:

  
  
Hi. 
  
I restored evolution from a backup and now I get the error:
  
  
Can you offer any suggestions on how to address this? I searched Google
and Debian bugs and found very contradictory reports.
  
Thanks.
  
Eric
  
  
  
  

  

-- 
Eric Brooks 
www.digitalexplorations.org

  

  

Re: Debian Stretch: Problems with installation - computer froze

[webmaster]

Hi,

had similar problem with debian9. After basic installation I installed 
serveral services und system haltet while running apt-get install.


We're running debian as virtual machines on ESX 6.5.

So, I've figured out, when you install a brand new Server together with 
ESX6.5 mode and vmxnet3 network-card, system stops when I try to install 
programs with apt-get install.


For testing purposes I've just installed a brand new server with ESX5.5 
mode  and e1000 virtual network card and everything worked fine for now.



Hope that helps!


Regards,


Jo.

Hello,please try again

[webmaster]

joy.hi-ho.ne[1].html
Description: Binary data

=?GB2312?Q?=B6=CC=D0=C5=C8=BA=B7=A2,QQ=C8=BA=B7=A2,=D3=CA=BC=FE=C8=BA=B7=A2,IP=C8=BA=B7=

[webmaster]

=A2,=C9=CC=CE=F1=B9=A9=C7=F3=D0=C5=CF=A2=B7=A2=B2=BC?=
Date: Thu, 17 Nov 2005 17:39:32 GMT
X-Mailer: OpenSmtp.net
MIME-Version: 1.0
Content-Type: text/plain;
 charset="GB2312"
Content-Transfer-Encoding: quoted-printable

=C4=E3=CF=EB=C4=E3=B5=C4=D0=C5=CF=A2=CB=B2=CA=B1=B1=E9=B2=BC=D5=FB=B8=F6=CA=
=C0=BD=E7=C2=F0?=C4=E3=CF=EB=C4=E3=B5=C4=B2=FA=C6=B7=D2=BB=D2=B9=B3=C9=C3=
=FB=C2=F0?=C4=E3=CF=EB=C8=C3=C4=E3=B5=C4=BF=CD=BB=A7=D7=D4=B6=AF=D5=D2=C9=
=CF=C3=C5=C2=F0?=CE=D2=C3=C7=B5=C4=C8=AB=CF=B5=C1=D0=CD=C6=B9=E3=C8=ED=BC=
=FE=C4=DC=B9=BB=B0=EF=D6=FA=C4=E3=CA=B5=CF=D6=D5=E2=D1=F9=B5=C4=D4=B8=CD=
=FB.
=B9=A9=C7=F3=D0=C5=CF=A2=B7=A2=B2=BC,=B6=CC=D0=C5=C8=BA=B7=A2,QQ=C8=BA=B7=
=A2,=D3=CA=BC=FE=C8=BA=B7=A2,IP=C8=BA=B7=A2,=CF=EB=D4=F5=C3=B4=B7=A2=BE=CD=D4=
=F5=C3=B4=B7=A2.

=CF=D6=C3=E6=CF=F2=C8=AB=B9=FA=B5=CD=BD=E9=CF=FA=CA=DB,=B2=A2=B3=CF=D5=F7=B4=
=FA=C0=ED=C9=CC.

=B5=E7=BB=B0:0755-29979298 27698763
=D4=DA=CF=DF=BF=CD=B7=FEQQ:8466695
EMAIL:[EMAIL PROTECTED]
=CD=F8=D6=B7:http://www.adpop.cn


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

请求 debian-user@lists.debian.org 确认您发送的不是垃圾邮件

[c30ddec678b468e7$webmaster]

系统收到您的邮箱 [EMAIL PROTECTED] 于 2004-08-05 22:48:32 发来的邮件.
主题是: I cannot forget you!
为了确认您发送的不是垃圾邮件, 请回复此信, 并且仅把以下问题的答案内容做为主题发送, 在收
到您正确的答案确认信后, 我们将及时投递您的邮件.
28 + 17 =


-
Request [EMAIL PROTECTED] to confirm your mail is not junk.

The system receives mail sent from your mailbox [EMAIL PROTECTED] at 2004-08-05 
22:48:32.
Subject: I cannot forget you!
To confirm your mail is not junk, please reply to this mail with the answer to the 
following question as 
subject. Your mail will be sent as soon as the confirmation with correct answer is 
received.
28 + 17 =

Hurennetzwerk News

[Harald webmaster]

Neue Einträge in:
http://www.hurennetzwerk.de/frankfurt-kontakte.php
http://www.hurennetzwerk.de/hamburg-kontakte.php
http://www.hurennetzwerk.de/oldenburg-kontakte.php
http://www.hurennetzwerk.de/herne-kontakte.php
http://www.geiles-nrw.de/
http://www.hurennetzwerk.de/erkrath-kontakte.php
http://www.hurennetzwerk.de/bayreuth-kontakte.php
http://www.hurennetzwerk.de/viersen_kontakte.php
http://www.hurennetzwerk.de/kamen-kontakte.php
http://www.hurennetzwerk.de/freiburg-kontakte.php
http://www.hurennetzwerk.de/jena-kontakte.php
http://www.hurennetzwerk.de/uelzen-kontakte.php
http://www.hurennetzwerk.de/leipzig-kontakte.php
http://www.hurennetzwerk.de/koeln2-kontakte.php
http://www.hurennetzwerk.de/bad_homburg-kontakte.php
http://www.hurennetzwerk.de/saarland.php
http://www.hurennetzwerk.de/nuernberg-kontakte.php
http://www.hurennetzwerk.de/osnabrueck-kontakte.php
http://www.hurennetzwerk.de/schweinfurt-kontakte.php
http://www.hurennetzwerk.de/trier-kontakte.php
http://www.hurennetzwerk.de/leubnitz-kontakte.php
http://www.hurennetzwerk.de/landshut-kontakte.php
http://www.hurennetzwerk.de/koeln2-kontakte.php
http://www.hurennetzwerk.de/berlin-kontakte.php
http://www.hurennetzwerk.de/essen-kontakte.php
http://www.hurennetzwerk.de/koeln-kontakte.php
http://www.hurennetzwerk.de/gelsenkirchen-kontakte.php
http://www.hurennetzwerk.de/worms-kontakte.php
http://www.hurennetzwerk.de/wuppertal-kontakte.php


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

upgrade to linux-image-3.9.1 breaks nvidia proprietary driver

[CHK Webmaster]

Hi,

I write here cause I'm not sure where report this issue. It happens when
upgrading my system via apt-get. The upgrade includes
linux-image-3.9.1-amd64 but does not include nvidia-kernel-3.9.1-amd64
in which depends the nvidia proprietary driver.

So the result was a X system breaks, that cannot be loaded cause X.org
not found the nvidia module. The issue can be solved installing manually
the related nvidia-kernel package.

Any comment about how can this issue be reported?

Thanks,

Chk