Bug#644174: My system resumes from "suspend to disk" with FLASH disk connected to the USB 3.0 port, and starts with that disks if i915.modest=0 is given

[wzabo...@elektron.elka.pw.edu.pl]

On 20.01.2013 00:01, Wojciech Zabołotny wrote:

Hi,

I've performed tests suggested by Jonathan in my system.

1st test:

I have started the system, connected the FLASH disk to the USB 3.0 port
and suspended it by "echo disk > /sys/power/state".

Then I pressed the POWER button to switch the system on again, and it
has resumed!

Similarly, the system resumed after "Hibernate" triggered from the KDE
menu.


2nd test:

With "i915.modeset=0" my system started with FLASH disk connected to the
USB 3.0 port


I attach logs (dmesg) and acpidumps after both tests.


I've forgotten to add, that the tests were performed with the newest 
3.7.3 kernel.


--
Regards,
Wojtek


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#658638: [Pkg-erlang-devel] Bug#658638: wings3d: I'm not able to save the file when "Weld" operation deletes a hole

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 11.02.2012 09:09, Sergei Golovan pisze:
> Hi!
> 
> On Sat, Feb 4, 2012 at 11:29 PM, wzab  wrote:
>>
>> I was editing the attached file w8.wings. I tried to remove the whole
>> an one end of the created "pipe" using the connect and weld operations.
>> However as soon as the hole disappears due to "welding" of the vertex
>> located in the middle of one edge to the vertex located on the end of this
>> edge, I'm not able to save the file any more.
>> The program creates the attached wings_crash.dump file, and after
>> click resumes operation, but I'm not able to save the resulting file
>> any more. (So finally I have to quit program loosing all my work).
> 
> Unfortunately, I can't reproduce this bug yet (may be because I can't
> recreate the exact sequence of actions). Could you show exactly which
> vertices did you connect and weld (may be even in a series of
> screenshots)?
> 
> And please, update the erlang, erlang-esdl and wings3d packages (I
> don't think that the bug is gone, but currently, erlang 15.b-dfsg-2
> produces more convenient crash dumps).
> 
> Cheers!

Hi,

Below are the steps which allow me to reproduce the problem.
In the figure p1.png you can see the vertex, which I weld to close
the "hole".
After vertex selection, with the right click I select the "weld"
operation from the pop-up menu, and with the left click I select
the vertex to which I want to weld the previously chosen one (see
p2.png).
Then with the right click I finalize the welding operation (see p3.png).
>From this moment I'm not able to save the model (see p4.png), even
though I can further continue work with it...
-- 
Regards,
Wojtek
<><><><>

Bug#681835: msgpack-python: Problem with packing of big dictionaries

[wzabo...@elektron.elka.pw.edu.pl]

Package: msgpack-python
Version: 0.1.10-1
Severity: important

Dear Maintainer,

I've tried to use msgpack to pack environment as a big dictionary, which
resulted in packing of keys only:

>>> import msgpack
>>> import os
>>> e=os.environ
>>> print e
{'DBUS_SESSION_BUS_ADDRESS':
'unix:abstract=/tmp/dbus-inhlMxTPua,guid=97ac3dcfb46a13d2a1a258c550042ce0',
'LESSOPEN': '| /usr/bin/lesspipe %s', 'LOGNAME': 'wzab', 'USER': 'wzab',
'DM_CONTROL': '/var/run/xdmctl', 'PATH':
'/home/wzab/bin:/home/wzab/bin:/usr/local/bin:/usr/bin:/bin:/usr/games',
'KDE_SESSION_VERSION': '4', 'KDE_FULL_SESSION': 'true', 'LANG':
'pl_PL.UTF-8', 'PROFILEHOME': '', 'TERM': 'xterm', 'SHELL': '/bin/bash',
'COLORFGBG': '15;0', 'XDG_SESSION_COOKIE':
'0a6aae407d2b71f7c409f60045ccb601-1342450909.742745-461782646', 'LANGUAGE':
'', 'SESSION_MANAGER':
'local/wzab:@/tmp/.ICE-unix/5052,unix/wzab:/tmp/.ICE-unix/5052', 'SHLVL':
'2', 'XCURSOR_THEME': 'oxy-black', 'WINDOWID': '41943058', '_':
'/usr/bin/python', 'SSH_AGENT_PID': '4385', 'HOME': '/home/wzab',
'KONSOLE_DBUS_SESSION': '/Sessions/10', 'KDE_SESSION_UID': '1000',
'QT_PLUGIN_PATH':
'/home/wzab/.kde/lib/kde4/plugins/:/usr/lib/kde4/plugins/', 'XDM_MANAGED':
'method=classic', 'SSH_AUTH_SOCK': '/tmp/ssh-mA6gazkUZny0/agent.4270',
'KONSOLE_DBUS_SERVICE': ':1.27', 'GTK2_RC_FILES':
'/etc/gtk-2.0/gtkrc:/home/wzab/.gtkrc-2.0:/home/wzab/.kde/share/config/gtkrc-2.0',
'LESSCLOSE': '/usr/bin/lesspipe %s %s', 'GS_LIB': '/home/wzab/.fonts',
'SHELL_SESSION_ID': '4da74f07d50b40008fb9b8643168be8f', 'WINDOWPATH': '7',
'DESKTOP_SESSION': 'kde-plasma', 'DISPLAY': ':0', 'HISTCONTROL':
'ignoredups', 'XDG_DATA_DIRS': '/usr/share:/usr/share:/usr/local/share',
'PWD': '/home/wzab/biezace/python-object-server/publik/send',
'GTK_RC_FILES':
'/etc/gtk/gtkrc:/home/wzab/.gtkrc:/home/wzab/.kde/share/config/gtkrc',
'LS_COLORS':
'rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;3
5:*.gl=01
;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:',
'KDE_MULTIHEAD': 'false'}
>>> p=msgpack.packb(e)
>>> msgpack.unpackb(p)
('DBUS_SESSION_BUS_ADDRESS', 'LESSOPEN', 'LOGNAME', 'USER', 'DM_CONTROL',
'PATH', 'KDE_SESSION_VERSION', 'KDE_FULL_SESSION', 'LANG', 'PROFILEHOME',
'TERM', 'SHELL', 'COLORFGBG', 'XDG_SESSION_COOKIE', 'LANGUAGE',
'SESSION_MANAGER', 'SHLVL', 'XCURSOR_THEME', 'WINDOWID', '_',
'SSH_AGENT_PID', 'HOME', 'KONSOLE_DBUS_SESSION', 'KDE_SESSION_UID',
'QT_PLUGIN_PATH', 'XDM_MANAGED', 'SSH_AUTH_SOCK', 'KONSOLE_DBUS_SERVICE',
'GTK2_RC_FILES', 'LESSCLOSE', 'GS_LIB', 'SHELL_SESSION_ID', 'WINDOWPATH',
'DESKTOP_SESSION', 'DISPLAY', 'HISTCONTROL', 'XDG_DATA_DIRS', 'PWD',
'GTK_RC_FILES', 'LS_COLORS', 'KDE_MULTIHEAD')
>>>

-- System Information:
Debian Release: wheezy/sid
Architecture: i386 (i686)

Kernel: Linux 3.4.1 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages msgpack-python depends on:
ii  libc6   2.13-33
ii  python  2.7.3~rc2-1
ii  python-support  1.0.15

msgpack-python recommends no packages.

msgpack-python suggests no packages.

-- no debconf information


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#644174: Another related bug...

[wzabo...@elektron.elka.pw.edu.pl]

If the diagnosis, that the problem is associated with sharing of IRQ 18 
between SMBus controller and XHCI controller, and with incorrect 
handling of shared interrupt by i2c-smbus.c driver is true,
then it could also explain the bug: 
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=623004


Wojtek


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#655152: The problem with "[drm:intel_prepare_page_flip] *ERROR* Prepared flip multiple times " has disappeared after one of latest updates

[wzabo...@elektron.elka.pw.edu.pl]

I've just stated, that the problem with "[drm:intel_prepare_page_flip]
*ERROR* Prepared flip multiple times " filling the logs has disappeared
after one of last system upgrades.
It seems that it was the user space problem (or it has been worked
around or masked in the user space), as it does not appear even when I
boot one of old kernels (e.g. 3.2.6) in which it was present (now I
usually run kernel 3.2.11).
-- 
Regards,
WZab



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#780364: The problem disappeared, when I removed /etc/adjtime file and rebooted

[wzabo...@elektron.elka.pw.edu.pl]

I have deleted the /etc/adjtime in the affected machine and rebooted it.
After that it boots correctly, without a delay caused by the "future
superblock write time".
However I don't understand what was the real cause of the problem...
-- 
Wojtek


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#837751: scribus: When I try to do "get Image" for a graphics frame, scribus segfaults

[wzabo...@elektron.elka.pw.edu.pl]

The strange thing, is that the problem occurs only in one machine.
Both machines run debian/testing. Both were updated at the same time.
The only difference I'm aware of is the video adapter - Integrated Intel
and Nvidia in the machine where the problem appeared. The integrated
Intel only in the machine where it works...

Regards,
Wojtek

Bug#837751: Fwd: [mat...@debian.org: Re: Bug#837751: scribus: When I try to do "get Image" for a graphics frame, scribus segfaults]

[wzabo...@elektron.elka.pw.edu.pl]

Dear Mattia,

Yes, I'm the same person. I don't know why CERN mailer does not accept 
your address.
However, some time ago the same happened to my University e-mail - I 
couldn't send e-mail to any CERN address.


Regarding the bug - the problem has also disappeared in the affected 
system.

I'm afraid it could be caused by a partial update?
After I've performed the next "apt-get update; apt-get dist-upgrade", I 
was not able to reprodecue this bug any more.


So probably you can mark this bug as "fixed" or even as "invalid".

With best regards,
Wojtek

On 18.09.2016 14:13, Mattia Rizzolo wrote:

The cern.ch SMTP doesn't like my mail setup (or I wonder anybody's, if
the issue is that the debian.org domain has no SPF record..)
See the bounce I received:
https://volatile.mapreri.org/2016-09-18/6d35f3e5d7186d5276b26ef8760628cb/Inbox.pdf
So I'm forwarding your email to your other address, assuming you are the
same person :)

If you reply to this email, please put the bug address in CC.

- Forwarded message from Mattia Rizzolo  -

Date: Sun, 18 Sep 2016 10:03:33 +
From: Mattia Rizzolo
To: Wojciech Zabolotny
Cc:837...@bugs.debian.org
Subject: Re: Bug#837751: scribus: When I try to do "get Image" for a graphics 
frame, scribus segfaults
Message-ID:<20160918100333.7ivomcgoblhak...@chase.mapreri.org>
User-Agent: Every email client sucks, this one just sucks less.

On Wed, Sep 14, 2016 at 04:40:57PM +0200, Wojciech Zabolotny wrote:

I assume by your "whenever" that it is steadily reproducible.
Can you try to temporary move away your ~/.scribus and see if the bug is
reproducible?


Indeed, renaming of ~/.scribus has cured the problem.

I couldn't reproduce the segfault with your .sla, and if I looked up the
upstream bug tracker correctly nobody else experienced segfaults
recently.
According to the core dump the crash happens somewhere in the middle of
dbus, and I couldn't even figure how it reached that point (here gdb
says "Backtrace stopped: previous frame inner to this frame (corrupt
stack?)" after #14).

Anyway, I'm tempted to close this bug as it was really easily "fixed" by
moving away your ~/.scribus directory.  probably some file in there
somehow was corrupted or got invalid data in your computer.




--
Wojciech M Zabolotny, PhD
Faculty Coordinator for International Student Mobility
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#528701: One more comment

[wzabo...@elektron.elka.pw.edu.pl]

I've forgotten to add, that the commands used in my config file work
perfectly, when entered in the fluidsynth shell.




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#548634: python-relatorio: Missing dependences: python-yaml and python-pycha

[wzabo...@elektron.elka.pw.edu.pl]

Subject: python-relatorio: Missing dependences: python-yaml and python-pycha
Package: python-relatorio
Version: 0.5.1-4
Severity: normal

*** Please type your report below this line ***
When trying to use the examples provided by python-relatorio, I had to
install additional packages: python-yaml and python-pycha.
Otherwise I got the following errors:
[...]
Traceback (most recent call last):
  File "/usr/lib/pymodules/python2.5/relatorio/templates/__init__.py", line
28, in 
__import__('relatorio.templates.%s' % name)
  File "/usr/lib/pymodules/python2.5/relatorio/templates/chart.py", line 25,
in 
import yaml
ImportError: No module named yaml
[...]

[...]
Traceback (most recent call last):
  File "/usr/lib/pymodules/python2.5/relatorio/templates/__init__.py", line
28, in 
__import__('relatorio.templates.%s' % name)
  File "/usr/lib/pymodules/python2.5/relatorio/templates/chart.py", line 34,
in 
import pycha
ImportError: No module named pycha
[...]

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages python-relatorio depends on:
ii  python2.5.4-2An interactive high-level
object-o
ii  python-genshi 0.5.1-1Python XML-based template
engine
ii  python-pkg-resources  0.6c9-2Package Discovery and
Resource Acc
ii  python-support1.0.3  automated rebuilding
support for P

python-relatorio recommends no packages.

python-relatorio suggests no packages.

-- no debconf information




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#547937: Loading of i915 with modeset=0 does not help

[wzabo...@elektron.elka.pw.edu.pl]

I've found that some problems related to xserver-xorg-video-intel may be
cured by adding "modeset=0" when loading i915 module.
I've tried that, but it didn't cure the problem.
X windows crashed again a few minutes ago :-(.

Now at the end of the Xorg.0.log file I've found the following information:

(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00fdf000:end of stolen memory
(II) intel(0): 0x00fdf000-0x07ffefff: DRI memory manager (114816 kB)
(II) intel(0): 0x07fff000-0x07ff: overlay registers (4 kB,
0x361c400
0 physical
)
(II) intel(0): 0x0800:end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x00fdf000:start of memory manager
(II) intel(0): 0x0100-0x017f: front buffer (8192 kB) X tiled
(II) intel(0): 0x0180-0x01804fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000:end of memory manager
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Output VGA is connected to pipe A
(II) MLK Trust Mouse 15313: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.






-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#538043: octplot doesn't work with the current version of octave in "testing"

[wzabo...@elektron.elka.pw.edu.pl]

Package: octplot
Version: 0.4.0-7
Severity: normal


When I try to activate the octplot I get the following message:
octave:1> toggle_octplot
error: Octplot was compiled for a different version of Octave
error: evaluating if command near line 40, column 3
error: evaluating if command near line 28, column 1
error: near line 54 of file
`/usr/share/octave/site/api-v32/m/octplot_enable.m'
error: evaluating if command near line 26, column 1
error: near line 32 of file
`/usr/share/octave/site/api-v32/m/toggle_octplot.m'

The reason are the lines 40-42 in the file octplot_enable.m:
  if(strcmp(version(),"3.0.1")==0)
error("Octplot was compiled for a different version of Octave");
  endif

The octplot will run only with octave 3.0.1, while current octave version in
testing is 3.0.5
In the dependencies of octplot we find: "Depends: octave3.0 (>= 3.0.1)" -
which does not agree with the above code.


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (1001, 'testing'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.29.4 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages octplot depends on:
ii  libatlas3gf-base [libl 3.6.0-24  Automatically Tuned Linear
Algebra
ii  libblas3gf [libblas.so 1.2-2 Basic Linear Algebra
Subroutines 3
ii  libc6  2.9-12GNU C Library: Shared libraries
ii  libfftw3-3 3.1.2-3.1 library for computing Fast
Fourier
ii  libfltk1.1 1.1.9-6   Fast Light Toolkit - shared
librar
ii  libfontconfig1 2.6.0-4   generic font configuration
library
ii  libfreetype6   2.3.9-4.1 FreeType 2 font engine,
shared lib
ii  libgcc11:4.4.0-5 GCC support library
ii  libgfortran3   4.4.0-5   Runtime library for GNU
Fortran ap
ii  libgl1-mesa-swx11 [lib 7.0.3-7   A free implementation of
the OpenG
ii  libglu1-mesa [libglu1] 7.0.3-7   The OpenGL utility library
(GLU)
ii  libhdf5-serial-1.6.6-0 1.6.6-4   Hierarchical Data Format 5
(HDF5)
ii  liblapack3gf [liblapac 3.2.1-1   library of linear algebra
routines
ii  libncurses55.7+20090523-1shared libraries for
terminal hand
ii  libreadline5   5.2-4 GNU readline and history
libraries
ii  libstdc++6 4.4.0-5   The GNU Standard C++ Library v3
ii  libx11-6   2:1.2.1-1 X11 client-side library
ii  libxft22.1.13-3  FreeType-based font drawing
librar
ii  libxinerama1   2:1.0.3-2 X11 Xinerama extension library
ii  octave3.0  1:3.0.5-6 GNU Octave language for
numerical
ii  zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime

Versions of packages octplot recommends:
ii  evince [postscript-viewer]  2.26.1-2 Document (postscript, pdf)
viewer
ii  ghostscript [postscript-vie 8.64~dfsg-12 The GPL Ghostscript
PostScript/PDF
ii  gv [postscript-viewer]  1:3.6.7-1PostScript and PDF viewer for X
ii  kghostview [postscript-view 4:3.5.9-3PostScript viewer for KDE

octplot suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#550477: grub-pc: after update-from-grub-legacy the system stopped booting

[wzabo...@elektron.elka.pw.edu.pl]

Package: grub-pc
Version: 1.97~beta3-1
Justification: renders package unusable
Severity: grave

*** Please type your report below this line ***
After I've issued the command "upgrade-from-grub-legacy", the system stopped
booting, when I press enter or select any line in the menu (if I let the
system
boot automatically after timeout - everything works...).
If I press enter, or move the highlighted line, then
i  get "error: file not found" and the menu is redisplayed
I have to enter the "edit" option in the grub menu, and make the following
changes:
1. Replace "set root=(hd0,3)" with "root=(hd0,3)"
2. Add the end of line in the last line (which defines the initial ramdisk)
Only after the above adjustments I'm able to boot with ctrl+x.

-- Package-specific info:

*** BEGIN /proc/mounts
/dev/disk/by-uuid/947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 / reiserfs
rw,relatime,notail 0 0
*** END /proc/mounts

*** BEGIN /boot/grub/device.map
(hd0)/dev/hda
*** END /boot/grub/device.map

*** BEGIN /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
set default=0
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
  fi
fi
set timeout=5
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
insmod png
if background_image /boot/grub/moreblue-orbit-grub.png ; then
  set color_normal=black/black
  set color_highlight=magenta/black
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Debian GNU/Linux, Linux 2.6.30-1-686" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.30-1-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro  
initrd/boot/initrd.img-2.6.30-1-686
}
menuentry "Debian GNU/Linux, Linux 2.6.30-1-686 (recovery mode)" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.30-1-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro single
initrd/boot/initrd.img-2.6.30-1-686
}
menuentry "Debian GNU/Linux, Linux 2.6.29.1" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.29.1 root=/dev/hda3 ro  
}
menuentry "Debian GNU/Linux, Linux 2.6.29.1 (recovery mode)" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.29.1 root=/dev/hda3 ro single
}
menuentry "Debian GNU/Linux, Linux 2.6.26-2-686" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.26-2-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro  
initrd/boot/initrd.img-2.6.26-2-686
}
menuentry "Debian GNU/Linux, Linux 2.6.26-2-686 (recovery mode)" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.26-2-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro single
initrd/boot/initrd.img-2.6.26-2-686
}
menuentry "Debian GNU/Linux, Linux 2.6.26-1-686" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.26-1-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro  
initrd/boot/initrd.img-2.6.26-1-686
}
menuentry "Debian GNU/Linux, Linux 2.6.26-1-686 (recovery mode)" {
insmod reiserfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 947eb5e4-9cdb-41f4-b8cc-aaa08af7f489
linux/boot/vmlinuz-2.6.26-1-686
root=UUID=947eb5e4-9cdb-41f4-b8cc-aaa08af7f489 ro single
initrd/boot/initrd.img-2.6.26-1-686
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/hda1)" {
insmod fat
set root=(hd0,1)
search --no-floppy --fs-uuid --set 4433-387f
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply
type the
# me

Bug#567400: python-visual doesn't work with nvidia-glx-legacy-96xx, works with other video adapters

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 10.09.2010 10:00, Andreas Beckmann pisze:

On Thursday, 28. January 2010 22:24:47 wzabo...@elektron.elka.pw.edu.pl wrote:
   

Package: nvidia-glx-legacy-96xx
Version: 96.43.14-2

When trying to use python-visual bball.py demo on a machine with
nvidia adapter requiring the nvidia-glx-legacy-96xx driver,
an error is reported (I attach the compressed error log).
 

...
   

When checking the dependencies of cvisualmodule.so and comparing it to
other, working systems, I've found the following differences:
$ ldd /usr/lib/python2.5/site-packages/cvisualmodule.so
[...]
 libGLcore.so.1 =>  /usr/lib/libGLcore.so.1 (0xb58ec000)
 libnvidia-tls.so.1 =>  /usr/lib/libnvidia-tls.so.1 (0xb58ea000)
[...]
 

...

New legacy nvidia driver packages 96.43.18-1 were just uploaded to unstable.
Please test them together with current python and python modules and see
whether the crash still happens.

Thanks

Andreas
   

I have downloaded:
nvidia-kernel-legacy-96xx-source_96.43.18-1_i386.deb

then I recompiled and installed the module: 
nvidia-kernel-legacy-96xx-2.6.32.9_96.43.18-1+Custom_i386.deb


Then I have downloaded and installed:
libgl1-nvidia-alternatives_195.36.31-3_i386.deb
libgl1-nvidia-legacy-96xx-glx_96.43.18-1_i386.deb
libglx-nvidia-alternatives_195.36.31-3_i386.deb
nvidia-glx-legacy-96xx_96.43.18-1_i386.deb

Finally I have updated whole system. After that I have rebooted the 
machine and run the vpython demo. Unfortunately, it still crashes, 
producing the attached bug report.

--
Regards,
Wojtek

System: Linux 2.6.32.9 #1 Thu Jun 3 09:58:50 CEST 2010 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10707000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
GTK+ Modules: gnomebreakpad, canberra-gtk-module

Memory status: size: 82526208 vsize: 82526208 resident: 34938880 share: 
15904768 rss: 34938880 rss_rlim: 18446744073709551615
CPU usage: start_time: 1284152069 rtime: 100 utime: 76 stime: 24 cutime:0 
cstime: 0 timeout: 0 it_real_value: 0 frequency: 100

Backtrace was generated from '/usr/bin/python2.6'

[Thread debugging using libthread_db enabled]
[New Thread 0xb4210b70 (LWP 2893)]
0xe424 in __kernel_vsyscall ()
#0  0xe424 in __kernel_vsyscall ()
#1  0xb7899f7f in pthread_cond_wait@@GLIBC_2.3.2 ()
   from /lib/i686/cmov/libpthread.so.0
#2  0xb6370253 in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#3  0xb6370820 in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#4  0xb637096a in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#5  0xb63fbe0b in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#6  0xb514f05f in boost::python::objects::function::call(_object*, _object*) 
const () from /usr/lib/libboost_python-py25.so.1.42.0
#7  0xb514f297 in ?? () from /usr/lib/libboost_python-py25.so.1.42.0
#8  0xb5156572 in 
boost::python::detail::exception_handler::operator()(boost::function0 
const&) const () from /usr/lib/libboost_python-py25.so.1.42.0
#9  0xb63a3bf2 in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#10 0xb5156551 in 
boost::python::detail::exception_handler::operator()(boost::function0 
const&) const () from /usr/lib/libboost_python-py25.so.1.42.0
#11 0xb63a3992 in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#12 0xb5156551 in 
boost::python::detail::exception_handler::operator()(boost::function0 
const&) const () from /usr/lib/libboost_python-py25.so.1.42.0
#13 0xb63a38e2 in ?? () from /usr/lib/python2.6/dist-packages/cvisualmodule.so
#14 0xb5156343 in boost::python::handle_exception_impl(boost::function0)
() from /usr/lib/libboost_python-py25.so.1.42.0
#15 0xb514bdd6 in ?? () from /usr/lib/libboost_python-py25.so.1.42.0
#16 0x0806232a in PyObject_Call ()
#17 0x080e017b in PyEval_EvalFrameEx ()
#18 0x080e2517 in PyEval_EvalCodeEx ()
#19 0x0816b91f in ?? ()
#20 0x0806232a in PyObject_Call ()
#21 0x0806a311 in ?? ()
#22 0x0806232a in PyObject_Call ()
#23 0x080b50c4 in ?? ()
#24 0x080acd65 in ?? ()
#25 0x0806232a in PyObject_Call ()
#26 0x080e017b in PyEval_EvalFrameEx ()
#27 0x080e2517 in PyEval_EvalCodeEx ()
#28 0x080e2617 in PyEval_EvalCode ()
#29 0x080ffccd in PyRun_FileExFlags ()
#30 0x080fff32 in PyRun_SimpleFileExFlags ()
#31 0x0805dd81 in Py_Main ()
#32 0x0805cf6b in main ()

Thread 2 (Thread 0xb4210b70 (LWP 2893)):
#0  0xe424 in __kernel_vsyscall ()
No symbol table info available.
#1  0xb789df4b in waitpid () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#2  0xb51f180f in g_spawn_sync () from /lib/libglib-2.0.so.0
No symbol table info available.
#3  0xb51f1b1c in g_spawn_command_line_sync () from /lib/libglib-2.0.so.0
No symbol table info available.
#4  0xb398f8f4 in ?? () from /usr/lib/gtk-2.0/modules/libgnomebreakpad.so
No symbol table info available.
#5  
No symbol table info available.
#6  0xb30b32d0 in ?? ()
No symbol table info available.
#7  0xb630ebcd in Gdk::GL::get_proc_address

Bug#567400: python-visual doesn't work with nvidia-glx-legacy-96xx, works with other video adapters

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 11.09.2010 01:55, Andreas Beckmann pisze:

On 2010-09-10 20:55, wzabo...@elektron.elka.pw.edu.pl wrote:
   

I have downloaded:
nvidia-kernel-legacy-96xx-source_96.43.18-1_i386.deb
 

...
   

Finally I have updated whole system. After that I have rebooted the
machine and run the vpython demo. Unfortunately, it still crashes,
producing the attached bug report.
 

That's a pity. The stacktrace does not include any symbols that
definitivly point to nvidia-glx. Did you try different Xorg driver, e.g. nv?

   

No I haven't, as 3D acceleration is essential to the task to be performed
on this machine. I have no such problems on machines with other chipsets
(exactly Intel ones - 82865G or newer).

Could someone with a similar 96xx setup try to reproduce the problem?

I just saw the following in one of the bugs you referenced in the
original report:

 From: Pietro Battiston

 Samuel, do you have libgtkglextmm-x11-1.2-dev installed?

 I get a very similar backtrace to yours on my (64 bit) system, but
 the problem disappears if I install that package.

 Pietro

Could you try this? The corresponding bug is marked as fixed-in-vcs, so
that will get fixed with the next upload of python-visual. Could this
fix your problem, too?

   

Maybe, in fact my python-visual is version 5.12, while the newest version on
http://vpython.org/ is 5.32
--
Thanks, Wojtek



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#596868: Subject: iceweasel: Iceweasel crashes when playing video files

[wzabo...@elektron.elka.pw.edu.pl]

Package: iceweasel
Version: 3.5.11-2
Severity: important

*** Please type your report below this line ***
When watching the video file (namely from site:
http://polskanarowery.sport.pl/msrowery/1,105126,8368344,Zupelnie_niepotrzebne_wynalazki_rowerowe__Ciezej_.html
) the iceweasel crashed generating the attached bug report.


-- Package-specific info:

-- Extensions information
Name: Adblock Plus
Location: ${PROFILE_EXTENSIONS}/{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Status: enabled

Name: Default
Location: 
/usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}

Package: iceweasel
Status: enabled

Name: Notatnik Google
Location: ${PROFILE_EXTENSIONS}/noteb...@google.com
Status: app-disabled

Name: Polski Language Pack
Location: /usr/lib/iceweasel/extensions/langpack...@firefox.mozilla.org
Package: iceweasel-l10n-pl
Status: enabled

-- Plugins information
Name: DivX® Web Player
Location: /usr/lib/mozilla/plugins/libtotem-mully-plugin.so
Package: totem-mozilla
Status: enabled

Name: Helix DNA Plugin: RealPlayer G2 Plug-In Compatible
Location: /usr/lib/mozilla/plugins/nphelix.so
Package: realplayer
Status: enabled

Name: Java(TM) Plug-in 1.6.0_21
Location: /usr/lib/jvm/java-6-sun-1.6.0.21/jre/lib/i386/libnpjp2.so
Package: sun-java6-bin
Status: enabled

Name: QuickTime Plug-in 7.6.6
Location: /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so
Package: totem-mozilla
Status: enabled

Name: Shockwave Flash
Location: /usr/lib/flashplugin-nonfree/libflashplayer.so
Status: enabled

Name: VLC Multimedia Plugin (compatible Totem 2.30.2)
Location: /usr/lib/mozilla/plugins/libtotem-cone-plugin.so
Package: totem-mozilla
Status: enabled

Name: Windows Media Player Plug-in 10 (compatible; Totem)
Location: /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so
Package: totem-mozilla
Status: enabled


-- Addons package information
ii  iceweasel  3.5.11-2   Web browser based on Firefox
ii  iceweasel-l10n 1:3.5.11+debia Polish language package for Iceweasel
ii  realplayer 1:10.0.9-0.2   RealPlayer 10 based on the open source 
Helix
ii  sun-java6-bin  6.21-1 Sun Java(TM) Runtime Environment (JRE) 
6 (ar

ii  totem-mozilla  2.30.2-2+b1Totem Mozilla plugin

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.33.5-rt23 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages iceweasel depends on:
ii  debianutils  3.4 Miscellaneous utilities 
specific t
ii  fontconfig   2.8.0-2.1   generic font configuration 
library
ii  libc62.11.2-2Embedded GNU C Library: 
Shared lib

ii  libgcc1  1:4.4.4-8   GCC support library
ii  libglib2.0-0 2.24.1-1The GLib library of C routines
ii  libgtk2.0-0  2.20.1-1+b1 The GTK+ graphical user 
interface
ii  libnspr4-0d  4.8.4-2 NetScape Portable Runtime 
Library

ii  libstdc++6   4.4.4-8 The GNU Standard C++ Library v3
ii  procps   1:3.2.8-9   /proc file system utilities
ii  xulrunner-1.9.1  1.9.1.11-2  XUL + XPCOM application runner

iceweasel recommends no packages.

Versions of packages iceweasel suggests:
ii  latex-xft-fonts   1.6.7-1TrueType versions of some 
TeX font
ii  libgssapi-krb5-2  1.8.3+dfsg~beta1-1 MIT Kerberos runtime 
libraries - k

pn  mozplugger  (no description available)
ii  ttf-lyx   1.6.7-1TrueType versions of some 
TeX font

pn  ttf-mathematica4.1  (no description available)
pn  xfonts-mathml  (no description available)
pn  xprint  (no description available)

Versions of packages xulrunner-1.9.1 depends on:
ii  libasound2  1.0.23-1 shared library for ALSA 
applicatio

ii  libatk1.0-0 1.30.0-1 The ATK accessibility toolkit
ii  libbz2-1.0  1.0.5-4  high-quality block-sorting 
file co
ii  libc6   2.11.2-2 Embedded GNU C Library: 
Shared lib
ii  libcairo2   1.8.10-5 The Cairo 2D vector 
graphics libra
ii  libdbus-1-3 1.2.24-3 simple interprocess 
messaging syst
ii  libfontconfig1  2.8.0-2.1generic font configuration 
library
ii  libfreetype62.4.2-1  FreeType 2 font engine, 
shared lib

ii  libgcc1 1:4.4.4-8GCC support library
ii  libglib2.0-02.24.1-1 The GLib library of C routines
ii  libgtk2.0-0 2.20.1-1+b1  The GTK+ graphical user 
interface
ii  libhunspell-1.2-0   1.2.11-1 spell checker and 
morphological an
ii  libjpeg62   6b1-1The Independent JPEG 
Group's JPEG
ii  libmozjs2d  

Bug#571728: openoffice.org-writer: oowriter doesn't start, tries to recover file, then fails after Java exception

[wzabo...@elektron.elka.pw.edu.pl]

Package: openoffice.org-writer
Version: 1:3.1.1-16
Justification: renders package unusable
Severity: grave

*** Please type your report below this line ***
After lest upgrade (25.02 or 26.02) OpenOffice stopped to work on all my
systems.
When I try to run e.g. the oowriter, it displays the empty "OpenOffice.org
Document Recovery" window, and after I press "OK" it terminates.
In the console the following message is displayed:

terminate called after throwing an instance of
'com::sun::star::deployment::DeploymentException'

I've removed all OO-related directories from the home directory - It
didn't help.
The same happens to oocalc.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32.9.media (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages openoffice.org-writer depends on:
ii  libc6  2.10.2-2  GNU C Library: Shared libraries
ii  libgcc11:4.4.2-9 GCC support library
ii  libicu42   4.2.1-3   International Components
for Unico
ii  libstdc++6 4.4.2-9   The GNU Standard C++ Library v3
ii  libstlport4.6ldbl  4.6.2-7   STLport C++ class library
ii  libwpd8c2a 0.8.14-1  Library for handling
WordPerfect d
ii  libwps-0.1-1   0.1.2-1   Works text file format
import filt
ii  openoffice.org-base-co 1:3.1.1-16full-featured office
productivity
ii  openoffice.org-core1:3.1.1-16full-featured office
productivity
ii  ure1.5.1+OOo3.1.1-16 OpenOffice.org UNO runtime
environ
ii  zlib1g 1:1.2.3.4.dfsg-3  compression library - runtime

Versions of packages openoffice.org-writer recommends:
ii  default-jre [java5-runtime]   1.6-34 Standard Java or Java
compatible R
ii  openjdk-6-jre [java5-runtime] 6b17-1.7-1 OpenJDK Java runtime, using
Hotspo
ii  openoffice.org-emailmerge 1:3.1.1-16 full-featured office
productivity
ii  openoffice.org-filter-binfilt 1:3.1.1-16 full-featured office
productivity
ii  openoffice.org-java-common1:3.1.1-16 full-featured office
productivity
ii  openoffice.org-math   1:3.1.1-16 full-featured office
productivity
ii  sun-java6-jre [java5-runtime] 6-16-1 Sun Java(TM) Runtime
Environment (

Versions of packages openoffice.org-writer suggests:
ii  openoffice.org-base   1:3.1.1-16 full-featured office
productivity
pn  openoffice.org-gcj (no description available)

Versions of packages openoffice.org-core depends on:
ii  fontconfig 2.8.0-2   generic font configuration
library
ii  libc6  2.10.2-2  GNU C Library: Shared libraries
ii  libcairo2  1.8.8-2   The Cairo 2D vector
graphics libra
ii  libcurl3-gnutls7.19.7-1  Multi-protocol file
transfer libra
ii  libdb4.8   4.8.26-1  Berkeley v4.8 Database
Libraries [
ii  libexpat1  2.0.1-7   XML parsing C library -
runtime li
ii  libfreetype6   2.3.11-1  FreeType 2 font engine,
shared lib
ii  libgcc11:4.4.2-9 GCC support library
ii  libglib2.0-0   2.22.4-1  The GLib library of C routines
ii  libgstreamer-plugins-b 0.10.26-1 GStreamer libraries from
the "base
ii  libgstreamer0.10-0 0.10.26-1 Core GStreamer libraries
and eleme
ii  libgtk2.0-02.18.6-1  The GTK+ graphical user
interface
ii  libhunspell-1.2-0  1.2.8-6   spell checker and
morphological an
ii  libhyphen0 2.4-6 ALTLinux hyphenation
library - sha
ii  libice62:1.0.6-1 X11 Inter-Client Exchange
library
ii  libicu42   4.2.1-3   International Components
for Unico
ii  libjpeg62  6b-16.1   The Independent JPEG
Group's JPEG
ii  libldap-2.4-2  2.4.17-2.1OpenLDAP libraries
ii  libneon27-gnutls   0.29.3-1  An HTTP and WebDAV client
library
ii  libnspr4-0d4.8.3-1   NetScape Portable Runtime
Library
ii  libnss3-1d 3.12.5-2  Network Security Service
libraries
ii  librdf01.0.10-1  Redland Resource
Description Frame
ii  libsm6 2:1.1.1-1 X11 Session Management library
ii  libstdc++6 4.4.2-9   The GNU Standard C++ Library v3
ii  libstlport4.6ldbl  4.6.2-7   STLport C++ class library
ii  libx11-6   2:1.3.3-1 X11 client-side library
ii  libxaw72:1.0.7-1 X11 Athena Widget library
ii  libxext6   2:1.1.1-2 X11 miscellaneous extension
librar
ii  libxinerama1   2:1.1-2   X11 Xinerama extension library
ii  libxml22.7.6.dfsg

Bug#565432: python-matplotlib: matplotlib.axes requires pytz package, provided by zope3 which is in conflict with other important packages

[wzabo...@elektron.elka.pw.edu.pl]

Package: python-matplotlib
Version: 0.99.1.2-2
Severity: important

*** Please type your report below this line ***
When I try to use the Subplot module from matplotlib.axes, I get the
following
error:

$ python
Python 2.5.4 (r254:67916, Nov 19 2009, 19:46:21)
[GCC 4.3.4] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import matplotlib
>>> matplotlib.use('GTK')
>>> from matplotlib.axes import Subplot
Traceback (most recent call last):
  File "", line 1, in 
  File "/usr/lib/pymodules/python2.5/matplotlib/axes.py", line 17, in

import matplotlib.dates as mdates
  File "/usr/lib/pymodules/python2.5/matplotlib/dates.py", line 87, in

import pytz
ImportError: No module named pytz
>>>

the pytz module is provided only by the zope3 package which is currently
in conflict with many important packages (e.g. with python-twisted):

zope3 depends on python-zopeinterface (= 3.3.1-7)
zope3 suggests zope3-dbg
python-zope.interface conflicts with zope3
zope3 depends on python-twisted-web2 (>= 0.2.0+svn20070403)

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32.media (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages python-matplotlib depends on:
ii  libatk1.0-0 1.28.0-1 The ATK accessibility toolkit
ii  libc6   2.10.2-2 GNU C Library: Shared libraries
ii  libcairo2   1.8.8-2  The Cairo 2D vector
graphics libra
ii  libfontconfig1  2.8.0-2  generic font configuration
library
ii  libfreetype62.3.11-1 FreeType 2 font engine,
shared lib
ii  libgcc1 1:4.4.2-8GCC support library
ii  libglib2.0-02.22.3-1 The GLib library of C routines
ii  libgtk2.0-0 2.18.3-1 The GTK+ graphical user
interface
ii  libpango1.0-0   1.26.2-1 Layout and rendering of
internatio
ii  libpng12-0  1.2.41-1 PNG library - runtime
ii  libstdc++6  4.4.2-8  The GNU Standard C++ Library v3
ii  python  2.5.4-5  An interactive high-level
object-o
ii  python-cairo1.8.6-1  Python bindings for the
Cairo vect
ii  python-dateutil 1.4.1-3  powerful extensions to the
standar
ii  python-gobject  2.20.0-1 Python bindings for the
GObject li
ii  python-matplotlib-data  0.99.1.2-2   Python based plotting
system (data
ii  python-numpy1:1.3.0-3Numerical Python adds a
fast array
ii  python-pyparsing1.5.2-1  Python parsing module
ii  python-support  1.0.6automated rebuilding
support for P
ii  python-tz   2009p-1  Python version of the Olson
timezo
ii  tcl8.5  8.5.8-2  Tcl (the Tool Command
Language) v8
ii  tk8.5   8.5.8-1  Tk toolkit for Tcl and X11,
v8.5 -
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

Versions of packages python-matplotlib recommends:
ii  python-glade2 2.16.0-1   GTK+ bindings: Glade support
ii  python-gtk2   2.16.0-1   Python bindings for the
GTK+ widge
ii  python-qt33.18.1-2   Qt3 bindings for Python
ii  python-qt44.6-1  Python bindings for Qt4
ii  python-tk 2.5.2-1.1  Tkinter - Writing Tk
applications
ii  python-wxgtk2.8   2.8.10.1-2 wxWidgets Cross-platform
C++ GUI t

Versions of packages python-matplotlib suggests:
ii  dvipng1.12-2 convert DVI files to PNG
graphics
ii  ipython   0.10-1 enhanced interactive Python
shell
ii  librsvg2-common   2.26.0-1   SAX-based renderer library
for SVG
ii  python-configobj  4.5.2-2a simple but powerful
config file
pn  python-excelerator (no description available)
pn  python-matplotlib-doc  (no description available)
ii  python-scipy  0.7.0-2scientific tools for Python
ii  python-traits 3.2.0-1Manifest typing and
reactive progr
ii  texlive-extra-utils   2007.dfsg.2-8  TeX Live: TeX auxiliary
programs
ii  texlive-latex-extra   2007.dfsg.17-2 TeX Live: LaTeX
supplementary pack

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#565432: This bug also makes impossible to run "ipython -pylab" which is rather important!

[wzabo...@elektron.elka.pw.edu.pl]

When I try to run "ipython -pylab", I get the following error:

$ ipython -pylab
Your PyGtk has set_interactive(), so you can use the
more stable single-threaded Gtk mode.
See https://bugs.launchpad.net/ipython/+bug/270856
Traceback (most recent call last):
  File "/usr/bin/ipython", line 28, in 
IPython.Shell.start().mainloop()
  File "/usr/lib/pymodules/python2.5/IPython/Shell.py", line 1241, in start
return shell(user_ns = user_ns)
  File "/usr/lib/pymodules/python2.5/IPython/Shell.py", line 1116, in
__init__
shell_class=MatplotlibMTShell)
  File "/usr/lib/pymodules/python2.5/IPython/Shell.py", line 801, in
__init__
on_kill=[mainquit])
  File "/usr/lib/pymodules/python2.5/IPython/ipmaker.py", line 100, in
make_IPython
embedded=embedded,**kw)
  File "/usr/lib/pymodules/python2.5/IPython/Shell.py", line 636, in
__init__
user_ns,user_global_ns,b2 =
self._matplotlib_config(name,user_ns,user_global_ns)
  File "/usr/lib/pymodules/python2.5/IPython/Shell.py", line 556, in
_matplotlib_config
import matplotlib.pylab as pylab
  File "/usr/lib/pymodules/python2.5/matplotlib/pylab.py", line 206, in

from matplotlib import mpl  # pulls in most modules
  File "/usr/lib/pymodules/python2.5/matplotlib/mpl.py", line 3, in 
from matplotlib import axes
  File "/usr/lib/pymodules/python2.5/matplotlib/axes.py", line 17, in

import matplotlib.dates as mdates
  File "/usr/lib/pymodules/python2.5/matplotlib/dates.py", line 87, in

import pytz
ImportError: No module named pytz




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#565432: closed by Sandro Tosi (Re: [Python-modules-team] Bug#565432: python-matplotlib: matplotlib.axes requires pytz package, provided by zope3 which is in conflict with ot

[wzabo...@elektron.elka.pw.edu.pl]

> Hello,
>
> On Fri, Jan 15, 2010 at 19:09, wzabo...@elektron.elka.pw.edu.pl
>  wrote:
>   
>>
>> Traceback (most recent call last):
>>  File "", line 1, in 
>>  File "/usr/lib/pymodules/python2.5/matplotlib/axes.py", line 17, in
>> 
>>import matplotlib.dates as mdates
>>  File "/usr/lib/pymodules/python2.5/matplotlib/dates.py", line 87, in
>> 
>>import pytz
>> ImportError: No module named pytz
>> 
>> the pytz module is provided only by the zope3 package which is currently
>> in conflict with many important packages (e.g. with python-twisted):
>> 
>
> ???
>
> $ python -c "import pytz as p ; print p.__file__"
> /usr/lib/python2.5/site-packages/pytz/__init__.pyc
> $ dpkg -S pytz/__init__.py
> python-tz: /usr/share/pyshared/pytz/__init__.py
>
>   
>> zope3 depends on python-zopeinterface (= 3.3.1-7)
>> zope3 suggests zope3-dbg
>> python-zope.interface conflicts with zope3
>> zope3 depends on python-twisted-web2 (>= 0.2.0+svn20070403)
>> 
>
> probably it's something else, maybe another submodule or such. What's
> needed by matplotlib is python-tz
>
>   
>> ii  python-tz   2009p-1  Python version of the Olson
>> 
>
> that's installed on your machine, so it should be something broken on
> your machine; for sure it's not a bug in matplotlib, hence closing.
>
>   
The problem is, that python-tz installs into /usr/share/pyshared
It seems that Python on my machine does not look for modules
in this directory.
I don't know if it is a problem specific to my machine, or common
for all up to date debian/testing systems...

-- 
Regards, Wojtek




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#565432: [Python-modules-team] Bug#565432: closed by Sandro Tosi (Re: Bug#565432: python-matplotlib: matplotlib.axes requires pytz package, provided by zope3 which is in confli

[wzabo...@elektron.elka.pw.edu.pl]

Sandro Tosi pisze:
>
>> It seems that Python on my machine does not look for modules
>> in this directory.
>> I don't know if it is a problem specific to my machine, or common
>> for all up to date debian/testing systems...
>> 
>
> your system. try to reinstall python-tz, maybe also removing+purging
> it before reinstall.
>
>   
Yes, simple "apt-get install python-tz --reinstall" fixed the problem.
However I'm very amused how this problem could emerge...
-- 
Thank you,
Wojtek


> Regards,
>   




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#596868: Subject: iceweasel: Iceweasel crashes when playing video files

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 14.09.2010 18:55, Mike Hommey pisze:

On Tue, Sep 14, 2010 at 06:27:25PM +0200, wzabo...@elektron.elka.pw.edu.pl 
wrote:
   

Package: iceweasel
Version: 3.5.11-2
Severity: important

*** Please type your report below this line ***
When watching the video file (namely from site:
http://polskanarowery.sport.pl/msrowery/1,105126,8368344,Zupelnie_niepotrzebne_wynalazki_rowerowe__Ciezej_.html
) the iceweasel crashed generating the attached bug report.
 

Please install iceweasel-dbg and get a new backtrace/bug report from
bugbuddy.

   

Here it is attached (gzipped to spare bandwidth),
Regards,
Wojtek


firefox-bin-raport_błędu.txt.gz
Description: GNU Zip compressed data

Bug#596868: R: Bug#596868: Subject: iceweasel: Iceweasel crashes when playing video files

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 16.09.2010 21:10, Adrian Knoth pisze:

On Thu, Sep 16, 2010 at 06:15:11AM +, Debian Bug Tracking System wrote:

Hi!

   

Bug #596868 [iceweasel] Subject: iceweasel: Iceweasel crashes when
playing video files
 

How do you bridge between iceweasel and jackd? Given that jackd is not a
generic desktop sound server but the underlying routing framework for
audio production environments (read: studios), you somehow need to
bridge your consumer applications (read: flash) to jackd.

   

Yes, this machine is used to work with jack (jackd2), ardour, zynaddsubfx,
guitarix and rakarrack, and it runs with RT-extended kernel.

There are a couple of options:

1. Use libasound2-plugins and its alsa-jack bridge

2. Use pulseaudio-module-jack, if need be, run
   "pactl load-module module-jack-sink" and then pavucontrol to
   redirect your sound to jackd


3. Use a jack-enabled libflashplugin-extrasound.

   

I have both libasound2-plugins and pulseaudio-module-jack installed.


If it's jack related problem, then probably it was caused by the fact, 
that jack server

was not started, when I used firefox.

However I think, that in this case I should get an error message (or 
even better error message box) urging me to start jackd - not just crash 
of the whole firefox application...

--
Regards,
Wojtek




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#567388: python-wxgtk2.6 doesn't install after upgrade

[wzabo...@elektron.elka.pw.edu.pl]

Package: python-wxgtk2.6
Version: 2.6.3.2.2-4+b1
Severity: important

After upgrade the python-wxgtk2.6 didn't install.
The following message was displayed:

Setting up python-wxgtk2.6 (2.6.3.2.2-4+b1) ...
file does not exist: /usr/lib/python2.6/dist-packages/wxversion.py
pycentral: pycentral pkginstall: error byte-compiling files (260)
pycentral pkginstall: error byte-compiling files (260)
dpkg: error processing python-wxgtk2.6 (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 python-wxgtk2.6
E: Sub-process /usr/bin/dpkg returned an error code (1)
Some errors occurred while unpacking. Packages that were installed
will be configured. This may result in duplicate errors
or errors caused by missing dependencies. This is OK, only the errors
above this message are important. Please fix them and run [I]nstall again
Press enter to continue.

apt-file search /usr/lib/python2.6/dist-packages/wxversion.py returned
nothing

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32.media (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages python-wxgtk2.6 depends on:
ii  libc6 2.10.2-2   GNU C Library: Shared libraries
ii  libgcc1   1:4.4.2-9  GCC support library
ii  libstdc++64.4.2-9The GNU Standard C++ Library v3
ii  libwxbase2.6-02.6.3.2.2-4+b1 wxBase library (runtime) -
non-GUI
ii  libwxgtk2.6-0 2.6.3.2.2-4+b1 wxWidgets Cross-platform
C++ GUI t
ii  python2.5.4-9An interactive high-level
object-o
ii  python-central0.6.14+nmu2register and build utility
for Pyt
ii  python-wxversion  2.8.10.1-2 wxWidgets Cross-platform
C++ GUI t
ii  python2.6 2.6.4-4An interactive high-level
object-o

python-wxgtk2.6 recommends no packages.

Versions of packages python-wxgtk2.6 suggests:
ii  wx2.6-doc2.6.3.2.2-4 wxWidgets Cross-platform
C++ GUI t
pn  wx2.6-examples (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#567400: python-visual doesn't work with nvidia-glx-legacy-96xx, works with other video adapters

[wzabo...@elektron.elka.pw.edu.pl]

Package: nvidia-glx-legacy-96xx
Version: 96.43.14-2
Severity: important

*** Please type your report below this line ***

When trying to use python-visual bball.py demo on a machine with
nvidia adapter requiring the nvidia-glx-legacy-96xx driver,
an error is reported (I attach the compressed error log).
The most important line in the error report is
#7  0xb6377bcd in Gdk::GL::get_proc_address(char const*) ()
   from /usr/lib/libgdkglextmm-x11-1.2.so.0
#8  0xb63d47fd in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.

When checking the dependencies of cvisualmodule.so and comparing it to
other, working systems, I've found the following differences:
$ ldd /usr/lib/python2.5/site-packages/cvisualmodule.so
[...]
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb58ec000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0xb58ea000)
[...]
the above shared libraries are provided by the nvidia-glx-legacy-96xx
package:
$ dpkg -S /usr/lib/libGLcore.so.1
nvidia-glx-legacy-96xx: /usr/lib/libGLcore.so.1
$ dpkg -S /usr/lib/libnvidia-tls.so.1
nvidia-glx-legacy-96xx: /usr/lib/libnvidia-tls.so.1

It seems, that the reason of the problem is the fact, that
 Gdk::GL::get_proc_address(char const*) () from
 /usr/lib/libgdkglextmm-x11-1.2.so.0 tries to find the function,
which does not exist in the NVidia driver.

A few months ago, the same problem was reported in more legible way
as: "(:6536): GdkGLExt-WARNING **: Cannot open \xa0v3L.so",
but now no such info is printed.

This problem was reported by others and by me, as problem with other
packages,
but it seems that in fact it may be related to NVidia closed drivers.
Other bug reports, which most probably describe the same problem:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=564745
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=555974
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=552567


-- Package-specific info:
uname -r:
Linux bzab 2.6.32.2 #1 Sat Jan 2 18:15:34 CET 2010 i686 GNU/Linux

/proc/version:
Linux version 2.6.32.2 (r...@wzab) (gcc version 4.3.4 (Debian 4.3.4-6) )
#1 Sat Jan 2 18:15:34 CET 2010


/proc/driver/nvidia/version:


01:05.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
4000] (rev c1)


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32.2
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages nvidia-glx-legacy-96xx depends on:
ii  libc6 2.10.2-2   GNU C Library: Shared libraries
ii  libgl1-mesa-glx [ 7.6.1-1A free implementation of
the OpenG
ii  libx11-6  2:1.3.3-1  X11 client-side library
ii  libxext6  2:1.1.1-2  X11 miscellaneous extension
librar
ii  nvidia-kernel-leg 10:96.43.14-2+azab.1.0 NVIDIA binary kernel module
for Li
ii  x11-common1:7.5+2X Window System (X.Org)
infrastruc

nvidia-glx-legacy-96xx recommends no packages.

Versions of packages nvidia-glx-legacy-96xx suggests:
ii  nvidia-kernel-legacy-96xx-s 96.43.13-0.1 NVIDIA binary kernel module
source
ii  nvidia-settings 190.42-1 Tool for configuring the
NVIDIA gr

-- no debconf information


err.txt.gz
Description: GNU Zip compressed data

Bug#567400: Problem still exists after latest upgrade

[wzabo...@elektron.elka.pw.edu.pl]

Some people reported that the described bug may be related to libboost, 
however even after the latest upgrade visual python generates segfault 
(I attach two error logs - the first one for python 2.5 and the second 
one for Python 2.6).




vpython_bug_2.5.txt.gz
Description: GNU Zip compressed data


vpython_bug_2.6.txt.gz
Description: GNU Zip compressed data

Bug#581633: iceweasel: random crash when browsing in system with RT-patched kernel with jack audio

[wzabo...@elektron.elka.pw.edu.pl]

Package: iceweasel
Version: 3.5.9-3
Severity: normal

*** Please type your report below this line ***
When browsing Internet (namely www.gazeta.pl) with Iceweasel in my
RT-patched system with jack audio (however with the jackd temporarily 
disabled),

I have experienced the random crash of Iceweasel.
First look in the generated bug-report (attached) seems to suggest, that the
problem may be associated with the audio handling in Iceweasel.

-- Package-specific info:

-- Extensions information
Name: Adblock Plus
Location: ${PROFILE_EXTENSIONS}/{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Status: enabled

Name: Default
Location: 
/usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}

Package: iceweasel
Status: enabled

Name: Notatnik Google
Location: ${PROFILE_EXTENSIONS}/noteb...@google.com
Status: app-disabled

Name: Polski Language Pack
Location: /usr/lib/iceweasel/extensions/langpack...@firefox.mozilla.org
Package: iceweasel-l10n-pl
Status: enabled

-- Plugins information
Name: DivX® Web Player
Location: /usr/lib/mozilla/plugins/libtotem-mully-plugin.so
Package: totem-mozilla
Status: enabled

Name: Helix DNA Plugin: RealPlayer G2 Plug-In Compatible
Location: /usr/lib/mozilla/plugins/nphelix.so
Package: realplayer
Status: enabled

Name: Java(TM) Plug-in 1.6.0_20
Location: /usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/i386/libnpjp2.so
Package: sun-java6-bin
Status: enabled

Name: QuickTime Plug-in 7.4.5
Location: /usr/lib/mozilla/plugins/mplayerplug-in-qt.so
Package: mozilla-mplayer
Status: enabled

Name: QuickTime Plug-in 7.6.6
Location: /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so
Package: totem-mozilla
Status: enabled

Name: RealPlayer 9
Location: /usr/lib/mozilla/plugins/mplayerplug-in-rm.so
Package: mozilla-mplayer
Status: enabled

Name: Shockwave Flash
Location: /usr/lib/flashplugin-nonfree/libflashplayer.so
Status: enabled

Name: VLC Multimedia Plugin (compatible Totem 2.30.1)
Location: /usr/lib/mozilla/plugins/libtotem-cone-plugin.so
Package: totem-mozilla
Status: enabled

Name: Windows Media Player Plug-in
Location: /usr/lib/mozilla/plugins/mplayerplug-in-wmp.so
Package: mozilla-mplayer
Status: enabled

Name: Windows Media Player Plug-in 10 (compatible; Totem)
Location: /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so
Package: totem-mozilla
Status: enabled

Name: mplayerplug-in 3.55
Location: /usr/lib/mozilla/plugins/mplayerplug-in.so
Package: mozilla-mplayer
Status: enabled


-- Addons package information
ii  iceweasel  3.5.9-3Web browser based on Firefox
ii  iceweasel-l10n 1:3.5.9+debian Polish language package for Iceweasel
ii  mozilla-mplaye 3.55-2 MPlayer-Plugin for Mozilla (deprecated)
ii  realplayer 1:10.0.9-0.2   RealPlayer 10 based on the open source 
Helix
ii  sun-java6-bin  6.20-dlj-1 Sun Java(TM) Runtime Environment (JRE) 
6 (ar

ii  totem-mozilla  2.30.1-2   Totem Mozilla plugin

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.33.3-rt16.wzab (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages iceweasel depends on:
ii  debianutils   3.2.3  Miscellaneous utilities 
specific t
ii  fontconfig2.8.0-2.1  generic font configuration 
library
ii  libc6 2.10.2-6   Embedded GNU C Library: 
Shared lib

ii  libgcc1   1:4.4.4-1  GCC support library
ii  libglib2.0-0  2.24.0-1   The GLib library of C routines
ii  libgtk2.0-0   2.20.0-3   The GTK+ graphical user 
interface
ii  libnspr4-0d   4.8.4-1NetScape Portable Runtime 
Library

ii  libstdc++64.4.4-1The GNU Standard C++ Library v3
ii  procps1:3.2.8-8  /proc file system utilities
ii  xulrunner-1.9.1   1.9.1.9-7  XUL + XPCOM application runner

iceweasel recommends no packages.

Versions of packages iceweasel suggests:
ii  latex-xft-fonts 1.6.5-1  TrueType versions of some 
TeX font
ii  libgssapi-krb5- 1.8.1+dfsg-2 MIT Kerberos runtime 
libraries - k

ii  libkrb531.6.dfsg.4~beta1-5lenny2 MIT Kerberos runtime libraries
pn  mozplugger(no description available)
ii  ttf-lyx 1.6.5-1  TrueType versions of some 
TeX font

pn  ttf-mathematica(no description available)
pn  xfonts-mathml(no description available)
pn  xprint(no description available)

Versions of packages xulrunner-1.9.1 depends on:
ii  libasound2  1.0.22-2 shared library for ALSA 
applicatio

ii  libatk1.0-0 1.30.0-1 The ATK accessibility toolkit
ii  libbz2-1.0  1.0.5-4  high-quality block-sorting 
file co
ii  libc6   

Bug#522244: Newer upstream version of simulavr is available

[wzabo...@elektron.elka.pw.edu.pl]

Package: simulavr
Version: 0.1.2.2-6.1
Severity: wishlist

The significantly newer version of the simulavr (0.1.2.6)
is available at http://mirrors.zerg.biz/nongnu/simulavr/

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (1001, 'testing'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.28.7 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages simulavr depends on:
ii  libc6 2.9-4  GNU C Library: Shared libraries
ii  libncurses5   5.7+20090314-1 shared libraries for
terminal hand

Versions of packages simulavr recommends:
ii  binutils-avr  2.18-4 Binary utilities supporting
Atmel'
ii  gcc-avr   1:4.3.3-1  The GNU C compiler (cross
compiler
ii  xterm 242-1  X terminal emulator

simulavr suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#607663: scribus-ng: New upstream version released (1.3.9)

[wzabo...@elektron.elka.pw.edu.pl]

Package: scribus-ng
Version: 1.3.5.dfsg+svn20091216-3+b2
Severity: wishlist

*** Please type your report below this line ***
According to the info available at http://www.scribus.net/ , the new
version 1.3.9 has been released on 30th Nov. 2010.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.36 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.utf8, LC_CTYPE=pl_PL.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages scribus-ng depends on:
ii  ghostscript 8.71~dfsg2-6 The GPL Ghostscript 
PostScript/PDF
ii  libaspell15 0.60.6-4 GNU Aspell spell-checker 
runtime l
ii  libc6   2.11.2-7 Embedded GNU C Library: 
Shared lib
ii  libcairo2   1.8.10-6 The Cairo 2D vector 
graphics libra
ii  libcups21.4.4-7  Common UNIX Printing 
System(tm) -
ii  libfontconfig1  2.8.0-2.1generic font configuration 
library
ii  libfreetype62.4.2-2.1FreeType 2 font engine, 
shared lib

ii  libgcc1 1:4.4.5-8GCC support library
ii  libjpeg62   6b1-1The Independent JPEG 
Group's JPEG

ii  liblcms11.18.dfsg-1.2+b3 Color management library
ii  libpython2.62.6.6-6  Shared Python runtime 
library (ver

ii  libqt4-network  4:4.6.3-4Qt 4 network module
ii  libqt4-xml  4:4.6.3-4Qt 4 XML module
ii  libqtcore4  4:4.6.3-4Qt 4 core module
ii  libqtgui4   4:4.6.3-4Qt 4 GUI module
ii  libstdc++6  4.4.5-8  The GNU Standard C++ Library v3
ii  libtiff43.9.4-5  Tag Image File Format 
(TIFF) libra

ii  libxml2 2.7.8.dfsg-1 GNOME XML library
ii  python  2.6.6-3+squeeze2 interactive high-level 
object-orie
ii  python-tk   2.6.6-1  Tkinter - Writing Tk 
applications

ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

Versions of packages scribus-ng recommends:
ii  cups-bsd  1.4.4-7Common UNIX Printing 
System(tm) -
ii  gsfonts-x11   0.21   Make Ghostscript fonts 
available t

pn  icc-profiles  (no description available)
ii  xfonts-scalable   1:1.0.1-1  scalable fonts for X

Versions of packages scribus-ng suggests:
ii  scribus-template  1.2.4.1-2  additional scribus templates

-- no debconf information



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#600802: closed by Julien Cristau (Re: Bug#600802: xserver-xorg-video-intel: After last upgrade intel X.Org X server stopped to work on my laptop)

[wzabo...@elektron.elka.pw.edu.pl]

As a quick workaround I have switched to the xserver-xorg-video-vesa.

What's interesting, I didn't experienced significant drop of video 
performance

(at least using glxgears to measure it ;-) ).




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#601558: The same problem in two other machines

[wzabo...@elektron.elka.pw.edu.pl]

I have similar problem in my two machines - one laptop and one desktop.
In fact after the problem appears, screen gets black and I'm not able to
ssh into these machines to get any logs.
I have reported more details to lkml:
http://lkml.org/lkml/2010/10/26/466
http://lkml.org/lkml/2010/10/27/60

As a workaround I had to switch to "vesa" driver, however with this 
driver the

external VGA output in my laptop doesn't work correctly (the media projector
displays too dark and slightly too wide image).




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#601558: Yet another comment regarding this bug and 593432

[wzabo...@elektron.elka.pw.edu.pl]

The Submitter of this bug report mentioned that it may be "resurrected" 
bug #593432.
In fact the 593432 has been "fixed" by either disabling (in config file) 
or blacklisting KMS for some chipsets.


Now the authors of xserver-xorg-video-intel made KMS mandatory,
so all users of the problematic chipsets (in my case 82865G and 945GM)
have run into the same problem again :-(.




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#601558: SOLVED? CONFIG_FRAMEBUFFER_CONSOLE=y solved the problem

[wzabo...@elektron.elka.pw.edu.pl]

I ve set two options in my kernel configuration:
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y

Now the system boots correctly with KMS switched on.




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#600802: SOLVED! CONFIG_FRAMEBUFFER_CONSOLE=y solved the problem

[wzabo...@elektron.elka.pw.edu.pl]

Yes, it was a kernel configuration related bug (it was submitted by 
someone alse as bug 601558)

The problem id that when KMS is switched on (at least in
Intel chipsets) the support for framebuffer console must be also
switched on.

I ve set two options in my kernel configuration:
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y

Now the system boots correctly with KMS switched on.





--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#601973: qemu <0.12 (with kqemu support) should be available as a separate package

[wzabo...@elektron.elka.pw.edu.pl]

Package: qemu
Version: 0.12.5+dfsg-2
Severity: wishlist

QEMU 0.12.x has dropped support for kqemu. This has left users of system
with CPU without hardware virtualization support without possibility
to run QEMU with acceleration.
As it seems, there is no possibility to have kqemu support reintroduced to
the mainstream QEMU, I'd like to suggest keeping the older, ver.<0.12 QEMU
in another package (qemu-old, qemu-legacy, qemu-kqemu?) which could
installed in parallel with the new one.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.36 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages qemu depends on:
ii  qemu-system0.12.5+dfsg-2 QEMU full system emulation 
binarie
ii  qemu-user  0.12.5+dfsg-2 QEMU user mode emulation 
binaries

ii  qemu-utils 0.12.5+dfsg-2 QEMU utilities

qemu recommends no packages.

Versions of packages qemu suggests:
pn  qemu-user-static  (no description available)

-- no debconf information



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#564745: python-visual fails when using in AMD K7 system with NVidia graphics adapter

[wzabo...@elektron.elka.pw.edu.pl]

Package: python-visual
Version: 1:5.12-1.1
Severity: important

*** Please type your report below this line ***
When I try to run even the simplest "bouncing ball" demo provided in
python-visual on the AMD K7 system with NVidia graphics card,
process fails and the following bug report is generated.
The same demo works perfectly on Intel P4 box with Intel graphics adapter.

System: Linux 2.6.32.2 #1 Sat Jan 2 18:15:34 CET 2010 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10605000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome
GTK+ Modules: gnomebreakpad

Memory status: size: 70549504 vsize: 70549504 resident: 31866880 share:
14610432 rss: 31866880 rss_rlim: 18446744073709551615
CPU usage: start_time: 1263239562 rtime: 101 utime: 73 stime: 28
cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 100

Backtrace was generated from '/usr/bin/python2.5'

[Thread debugging using libthread_db enabled]
[New Thread 0xb4336b70 (LWP 6461)]
0xe424 in __kernel_vsyscall ()
#0  0xe424 in __kernel_vsyscall ()
#1  0xb76db0a5 in pthread_cond_wait@@GLIBC_2.3.2 ()
   from /lib/i686/cmov/libpthread.so.0
#2  0xb64dbd92 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#3  0xb64dc430 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#4  0xb64dc57a in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#5  0xb656388b in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#6  0xb53036f0 in boost::python::objects::function::call(_object*,
_object*) const () from /usr/lib/libboost_python-py25.so.1.40.0
#7  0xb5303977 in ?? () from /usr/lib/libboost_python-py25.so.1.40.0
#8  0xb530bcc2 in
boost::python::detail::exception_handler::operator()(boost::function0
const&) const () from /usr/lib/libboost_python-py25.so.1.40.0
#9  0xb650da02 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#10 0xb530bca1 in
boost::python::detail::exception_handler::operator()(boost::function0
const&) const () from /usr/lib/libboost_python-py25.so.1.40.0
#11 0xb650d7a2 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#12 0xb530bca1 in
boost::python::detail::exception_handler::operator()(boost::function0
const&) const () from /usr/lib/libboost_python-py25.so.1.40.0
#13 0xb650d6f2 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
#14 0xb530ba83 in
boost::python::handle_exception_impl(boost::function0)
() from /usr/lib/libboost_python-py25.so.1.40.0
#15 0xb5301207 in ?? () from /usr/lib/libboost_python-py25.so.1.40.0
#16 0x0805d2a7 in PyObject_Call ()
#17 0x080cb3fd in PyEval_EvalFrameEx ()
#18 0x080ce445 in PyEval_EvalCodeEx ()
#19 0x0811422e in ?? ()
#20 0x0805d2a7 in PyObject_Call ()
#21 0x0806335f in ?? ()
#22 0x0805d2a7 in PyObject_Call ()
#23 0x080a5058 in ?? ()
#24 0x080ac331 in ?? ()
#25 0x0805d2a7 in PyObject_Call ()
#26 0x080cb3fd in PyEval_EvalFrameEx ()
#27 0x080ce445 in PyEval_EvalCodeEx ()
#28 0x080ce657 in PyEval_EvalCode ()
#29 0x080eb36f in PyRun_FileExFlags ()
#30 0x080eb62a in PyRun_SimpleFileExFlags ()
#31 0x08059350 in Py_Main ()
#32 0x08058742 in main ()

Thread 2 (Thread 0xb4336b70 (LWP 6461)):
#0  0xe424 in __kernel_vsyscall ()
No symbol table info available.
#1  0xb76def0b in waitpid () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#2  0xb5398a57 in g_spawn_sync () from /lib/libglib-2.0.so.0
No symbol table info available.
#3  0xb5398d7c in g_spawn_command_line_sync () from /lib/libglib-2.0.so.0
No symbol table info available.
#4  0xb6491a54 in ?? () from /usr/lib/gtk-2.0/modules/libgnomebreakpad.so
No symbol table info available.
#5  
No symbol table info available.
#6  0xb399a180 in ?? ()
No symbol table info available.
#7  0xb647dbcd in Gdk::GL::get_proc_address(char const*) ()
   from /usr/lib/libgdkglextmm-x11-1.2.so.0
No symbol table info available.
#8  0xb64f95dd in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#9  0xb64d986d in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#10 0xb64ddd53 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#11 0xb6501b83 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#12 0xb64f9721 in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#13 0xb64c683e in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#14 0xb64f949e in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#15 0xb64ff2fe in ?? () from
/usr/lib/python2.5/site-packages/cvisualmodule.so
No symbol table info available.
#16 0xb5dd0995 in ?? () from /usr/lib/libglibmm-2.4.so.1
No symbol table info available.
#17 0xb53605e6 in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#18 0xb535ff28 in g_main_context_dispatch () from /lib/libglib-2.0.so.0
No sym

Bug#564745: It seems, that 552567 is the same bug - also related to the NVIDIA adapter

[wzabo...@elektron.elka.pw.edu.pl]

I've just stated, that the bug which I've reported may be the same as
552567. The common fact is the use of NVIDIA graphics adapter with
proprietary driver...

Maybe the 555974 is also the same problem? I have sent additional
details about 555974, but after one update (I don't remember when) the
system stopped to complain about "(:6536): GdkGLExt-WARNING **:
Cannot open \xa0v3L.so" and only generates the crash report, which I've
reported as 564745.
-- 
TIA & Regards,
Wojtek




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#482356: avr-binutils 2.20-2 in debian/testing are still lacking coff-avr support

[wzabo...@elektron.elka.pw.edu.pl]

The coff-avr support is needed for testing of AVR code with VMLAB (
http://www.amctools.com/vmlab.htm ).
Unfortunately, the version  2.20-2 , which is available in testing still
lacks this support.
I have to use the avr-objcopy extracted from the old 2.18 version of
avr-binutils to generate coff from elf.




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#555974: Similar bug found (and solved?) in Ubuntu

[wzabo...@elektron.elka.pw.edu.pl]

I have faced the similar bug in one of my debian/testing systems.
Looking for the solution, I've found the following:
https://bugs.launchpad.net/python/+bug/457688
where the similar bug in Ubuntu is described.




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#550702: Similar problem with HP/Compaq nx7300

[wzabo...@elektron.elka.pw.edu.pl]

I had similar problem with HP/Compaq nx7300. Booting linux (even
different versions of kernel) didn't cause any trouble.
Booting Windows XP Home (installed automatically by os-prober) caused
grub to hang immediately after displaying "Welcome to GRUB!"

Maybe either grub-ps, or os-prober should detect such dual-booting
situation and automatically propose the workaround with:
# install-mbr /dev/sda
# grub-install --force /dev/sdaX
?
-- 
TIA, BR,
Wojtek



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#504774: foomatic-filters: CUPS error_log for old driver for HL-1430 - purely English report

[wzabo...@elektron.elka.pw.edu.pl]

Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal

*** Please type your report below this line ***
Below is the error generated for another user, which uses English locales.
Therefore the error report is in English only:

E [19/Nov/2009:21:39:42 +0100] [Job 1162] Job stopped due to filter errors; 
please consult the error_log file for details.
D [19/Nov/2009:21:39:42 +0100] [Job 1162] The following messages were recorded 
from 21:39:41 to 21:39:42
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Adding start banner page "none".
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Adding end banner page "none".
D [19/Nov/2009:21:39:42 +0100] [Job 1162] File of type 
application/vnd.cups-banner queued by "anonymous".
D [19/Nov/2009:21:39:42 +0100] [Job 1162] hold_until=0
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Queued on "hl1430" by "anonymous".
D [19/Nov/2009:21:39:42 +0100] [Job 1162] job-sheets=none,none
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[0]="hl1430"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[1]="1162"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[2]="anonymous"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[3]="Test Page"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[4]="1"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
argv[5]="job-uuid=urn:uuid:b63bda9d-1654-3e92-4c97-4b2b9b41616f 
job-originating-host-name=localhost"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] argv[6]="/var/spool/cups/d01162-001"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[8]="HOME=/var/spool/cups/tmp"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[10]="server_admin=r...@wzab.nasz.dom"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[11]="SOFTWARE=CUPS/1.4.1"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[13]="TZ=Europe/Warsaw"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[14]="USER=root"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[17]="IPP_PORT=631"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[18]="CHARSET=utf-8"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[19]="LANG=en_US.UTF-8"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[20]="PPD=/etc/cups/ppd/hl1430.ppd"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[21]="RIP_MAX_CACHE=514547k"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[22]="CONTENT_TYPE=application/vnd.cups-banner"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[23]="DEVICE_URI=usb://Brother/HL-1430%20series"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[24]="PRINTER_INFO=hl1430"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[25]="PRINTER_LOCATION="
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[26]="PRINTER=hl1430"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] envp[27]="CUPS_FILETYPE=document"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
envp[28]="FINAL_CONTENT_TYPE=printer/hl1430"
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Started filter 
/usr/lib/cups/filter/bannertops (PID 4828)
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Started filter 
/usr/lib/cups/filter/pstopdf (PID 4829)
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Started filter 
/usr/lib/cups/filter/pdftopdf (PID 4831)
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Started filter 
/usr/lib/cups/filter/foomatic-rip (PID 4832)
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Started backend 
/usr/lib/cups/backend/usb (PID 4833)
D [19/Nov/2009:21:39:42 +0100] [Job 1162] 
load_banner(filename="/var/spool/cups/d01162-001")
D [19/Nov/2009:21:39:42 +0100] [Job 1162] pstopdf 5 args: 1162 anonymous Test 
Page 1 job-uuid=urn:uuid:b63bda9d-1654-3e92-4c97-4b2b9b41616f 
job-originating-host-name=localhost
D [19/Nov/2009:21:39:42 +0100] [Job 1162] PPD: /etc/cups/ppd/hl1430.ppd
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Page = 595x842; 18,36 to 577,806
D [19/Nov/2009:21:39:42 +0100] [Job 1162] STATE: +connecting-to-device
D [19/Nov/2009:21:39:42 +0100] [Job 1162] XXX U 
|usb://Brother/HL-1430%20series|usb://Brother/HL-1430%20series|
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Printer using device file 
"/dev/usb/lp0"...
D [19/Nov/2009:21:39:42 +0100] [Job 1162] STAT

Bug#504774: foomatic-filters: More details about not working old workaround

[wzabo...@elektron.elka.pw.edu.pl]

Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal

*** Please type your report below this line ***
When I tried to print something on the printer configured with the
old PPD, I get the following errors in the /var/log/cups/error_log :

E [19/Nov/2009:21:24:21 +0100] [Job 1158] Job stopped due to filter
errors; please consult the error_log file for details.
D [19/Nov/2009:21:24:21 +0100] [Job 1158] The following messages were
recorded from 21:24:20 to 21:24:21
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Job restarted by user.
D [19/Nov/2009:21:24:21 +0100] [Job 1158] job-sheets=none,none
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[0]="hl1430"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[1]="1158"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[2]="bartek"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[3]="Wierszpatriot"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[4]="1"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] argv[5]="InputSlot=upper
PageSize=A4 job-uuid=urn:uuid:0f3ea400-bef8-3301-448d-14a8c95d1a37
job-originating-host-name=localhost"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
argv[6]="/var/spool/cups/d01158-001"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[1]="CUPS_DATADIR=/usr/share/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[6]="CUPS_SERVERROOT=/etc/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[7]="CUPS_STATEDIR=/var/run/cups"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[8]="HOME=/var/spool/cups/tmp"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[10]="server_admin=r...@wzab.nasz.dom"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[11]="SOFTWARE=CUPS/1.4.1"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[12]="TMPDIR=/var/spool/cups/tmp"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[13]="TZ=Europe/Warsaw"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[14]="USER=root"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[16]="CUPS_ENCRYPTION=IfRequested"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[17]="IPP_PORT=631"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[18]="CHARSET=utf-8"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[19]="LANG=pl_PL.UTF-8"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[20]="PPD=/etc/cups/ppd/hl1430.ppd"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[21]="RIP_MAX_CACHE=514547k"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[22]="CONTENT_TYPE=application/postscript"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[23]="DEVICE_URI=usb://Brother/HL-1430%20series"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[24]="PRINTER_INFO=hl1430"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[25]="PRINTER_LOCATION="
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[26]="PRINTER=hl1430"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] envp[27]="CUPS_FILETYPE=document"
D [19/Nov/2009:21:24:21 +0100] [Job 1158]
envp[28]="FINAL_CONTENT_TYPE=printer/hl1430"
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Started filter
/usr/lib/cups/filter/pstopdf (PID 4535)
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Started filter
/usr/lib/cups/filter/pdftopdf (PID 4536)
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Started filter
/usr/lib/cups/filter/foomatic-rip (PID 4537)
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Started backend
/usr/lib/cups/backend/usb (PID 4538)
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Restarted by "root".
D [19/Nov/2009:21:24:21 +0100] [Job 1158] STATE: +connecting-to-device
D [19/Nov/2009:21:24:21 +0100] [Job 1158] pstopdf 6 args: 1158 bartek
Wierszpatriot 1 InputSlot=upper PageSize=A4
job-uuid=urn:uuid:0f3ea400-bef8-3301-448d-14a8c95d1a37
job-originating-host-name=localhost /var/spool/cups/d01158-001
D [19/Nov/2009:21:24:21 +0100] [Job 1158] PPD: /etc/cups/ppd/hl1430.ppd
D [19/Nov/2009:21:24:21 +0100] [Job 1158] XXX U
|usb://Brother/HL-1430%20series|usb://Brother/HL-1430%20series|
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Printer using device file
"/dev/usb/lp0"...
D [19/Nov/2009:21:24:21 +0100] [Job 1158] STATE: -connecting-to-device
D [19/Nov/2009:21:24:21 +0100] [Job 1158] backendRunLoop(print_fd=0,
device_fd=5, snmp_fd=-1, addr=(nil), use_bc=0, side_cb=0xb7704790)
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Resolution: 600x600
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Page size: A4
D [19/Nov/2009:21:24:21 +0100] [Job 1158] Getting input from file
D [19/Nov/2009:21:24:21 +0100] [Job 1158] foomatic-rip version 4.0.1.208
running...
D [19/Nov/2009:21:24:21 +0100

Bug#504774: foomatic-filters: Old workaround - problem isolated

[wzabo...@elektron.elka.pw.edu.pl]

Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal

*** Please type your report below this line ***
I have found the reason why the old workaround stopped to work.
The problematic line in the error_log is:
D [19/Nov/2009:21:39:42 +0100] [Job 1162] Starting renderer with command: gs 
-dFirstPage=1  -q -dBATCH -dPARANOIDSAFER -dNOPAUSE -sDEVICE=hl1250 
-dEconoMode=2 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r600x600 
-dSourceTray=2 -sOutputFile=- -c '/Default << /SpotFunction { 180 mul cos exch 
180 mul cos add 2 div } bind /HalftoneType 1 /AccurateScreens true /Frequency 
137 /Angle 37 /HalftoneName (Round Dot Screen) >> /Halftone defineresource 
sethalftone << /HalftoneMode 1 /UseWTS false /Accura -f   
/var/spool/cups/tmp/foomatic-ynzpH8 

I've tried to run this command by hand:
$ gs -dFirstPage=1  -q -dBATCH -dPARANOIDSAFER -dNOPAUSE -sDEVICE=hl1250 
-dEconoMode=2 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r600x600 
-dSourceTray=2 -sOutputFile=- -c '/Default << /SpotFunction { 180 mul cos exch 
180 mul cos add 2 div } bind /HalftoneType 1 /AccurateScreens true /Frequency 
137 /Angle 37 /HalftoneName (Round Dot Screen) >> /Halftone defineresource 
sethalftone << /HalftoneMode 1 /UseWTS false /Accura -f   
/var/spool/cups/tmp/foomatic-ynzpH8 > tt.bin
> 
Which as you can see hangs waiting for matching "'".
The correct command should be:
$gs -dFirstPage=1  -q -dBATCH -dPARANOIDSAFER -dNOPAUSE -sDEVICE=hl1250 
-dEconoMode=2 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r600x600 
-dSourceTray=2 -sOutputFile=- -c '/Default << /SpotFunction { 180 mul cos exch 
180 mul cos add 2 div } bind /HalftoneType 1 /AccurateScreens true /Frequency 
137 /Angle 37 /HalftoneName (Round Dot Screen) >> /Halftone defineresource 
sethalftone << /HalftoneMode 1 /UseWTS false /Accura ' -f   
/var/spool/cups/tmp/foomatic-ynzpH8 > tt.bin

Which generates the proper binary for my printer.
So the problem must be somewhere where the above command line for gs execution 
is generated

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31.4 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages foomatic-filters depends on:
ii  bash 4.0-4   The GNU Bourne Again SHell
ii  debconf [debconf-2.0]1.5.28  Debian configuration management sy
ii  libc62.10.1-7GNU C Library: Shared libraries
ii  libgs8   8.70~dfsg-2 The Ghostscript PostScript/PDF int
ii  perl 5.10.1-7Larry Wall's Practical Extraction 
ii  ucf  3.0024  Update Configuration File: preserv

Versions of packages foomatic-filters recommends:
ii  a2ps  1:4.14-1   GNU a2ps - 'Anything to PostScript
ii  cups  1.4.1-4Common UNIX Printing System(tm) - 
ii  cups-bsd [lpr]1.4.1-4Common UNIX Printing System(tm) - 
ii  cups-client   1.4.1-4Common UNIX Printing System(tm) - 
ii  enscript  1.6.4-13   Converts ASCII text to Postscript,
ii  foomatic-db-engine4.0-20090509-1 OpenPrinting printer support - pro
ii  ghostscript   8.70~dfsg-2The GPL Ghostscript PostScript/PDF
ii  mpage 2.5.6-1print multiple pages per sheet on 

foomatic-filters suggests no packages.

-- debconf information:
  foomatic-filters/spooler: cups
  foomatic-filters/gspath: gs
  foomatic-filters/ps_accounting: false
  foomatic-filters/config_parsed: true
  foomatic-filters/textfilter: Automagic
  foomatic-filters/filter_debug: false
  foomatic-filters/custom_textfilter:
  foomatic-filters/custom_gspath:




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#504774: foomatic-filters: Old workaround - reason of failure found

[wzabo...@elektron.elka.pw.edu.pl]

Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal

*** Please type your report below this line ***
I have found the reason why the old workaround has stopped working.

The file currently available at:
http://www.linuxprinting.org/ppd-o-matic.cgi?driver=hl1250&printer=Brother-HL-1430&show=0
(suggested in the old workaround) is currently damaged.
Probably a few days ago I have reconfigured the printer and downloaded the PPD
from www.linuxprinting.org .

Its lines 250 to 270 look like this:

*OpenUI *HalftoningAlgorithm/Halftoning Algorithm: PickOne
*FoomaticRIPOption HalftoningAlgorithm: enum CmdLine C
*OrderDependency: 1000 PageSetup *HalftoningAlgorithm
*DefaultHalftoningAlgorithm: Standard
*HalftoningAlgorithm Accurate/Accurate: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=Accurate"
*FoomaticRIPOptionSetting HalftoningAlgorithm=Accurate: " -c '/De&&
fault << /SpotFunction { 180 mul cos exch 180 mul cos add 2 div &&
} bind /HalftoneType 1 /AccurateScreens true /Frequency 137 /Angle 37 &&
/HalftoneName (Round Dot Screen) >> /Halftone defineresource set&&
halftone << /HalftoneMode 1 /UseWTS false /Accura"
*End
*HalftoningAlgorithm Standard/Standard: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=Standard"
*FoomaticRIPOptionSetting HalftoningAlgorithm=Standard: ""
*HalftoningAlgorithm WTS/Well-Tempered Screening: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=WTS"
*FoomaticRIPOptionSetting HalftoningAlgorithm=WTS: " -c '/Default&&
 << /SpotFunction { 180 mul cos exch 180 mul cos add 2 div } bin&&
d /HalftoneType 1 /AccurateScreens true /Frequency 137 /Angle 37 /Half&&
toneName (Round Dot Screen) >> /Halftone defineresource sethalft&&
one << /HalftoneMode 1 /UseWTS true /Accurat"
*End
*CloseUI: *HalftoningAlgorithm

As you can seem the FoomaticRIPOptionSetting definitions are truncated.

The right way to go is to use the 
/usr/share/ppd/openprinting.org-gs/Brother/Brother-HL-1430-hl1250.ppd.gz
provided by the foomatic-filters-ppds package.
This file (at least today - the version Version: 20080528-2.1) contains 
the correct PPD (lines 245-271):

*OpenGroup: Adjustment/Adjustment

*OpenUI *HalftoningAlgorithm/Halftoning Algorithm: PickOne
*FoomaticRIPOption HalftoningAlgorithm: enum CmdLine C
*OrderDependency: 1000 PageSetup *HalftoningAlgorithm
*DefaultHalftoningAlgorithm: Standard
*HalftoningAlgorithm Accurate/Accurate: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=Accurate"
*FoomaticRIPOptionSetting HalftoningAlgorithm=Accurate: " -c '/De&&
fault << /SpotFunction { 180 mul cos exch 180 mul cos add 2 div &&
} bind /HalftoneType 1 /AccurateScreens true /Frequency 137 /Angle 37 &&
/HalftoneName (Round Dot Screen) >> /Halftone defineresource set&&
halftone << /HalftoneMode 1 /UseWTS false /AccurateScreens true &&
>> setuserparams'"
*End
*HalftoningAlgorithm Standard/Standard: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=Standard"
*FoomaticRIPOptionSetting HalftoningAlgorithm=Standard: ""
*HalftoningAlgorithm WTS/Well-Tempered Screening: "%% FoomaticRIPOptionSetting: 
HalftoningAlgorithm=WTS"
*FoomaticRIPOptionSetting HalftoningAlgorithm=WTS: " -c '/Default&&
 << /SpotFunction { 180 mul cos exch 180 mul cos add 2 div } bin&&
d /HalftoneType 1 /AccurateScreens true /Frequency 137 /Angle 37 /Half&&
toneName (Round Dot Screen) >> /Halftone defineresource sethalft&&
one << /HalftoneMode 1 /UseWTS true /AccurateScreens true >&g&&
t; setuserparams'"
*End
*CloseUI: *HalftoningAlgorithm

*CloseGroup: Adjustment

Please do not "upgrade" the PPD Brother-HL-1430-hl1250.ppd in
foomatic-filters-ppds to the current version from 
http://www.linuxprinting.org/show_printer.cgi?recnum=Brother-HL-1430 ,
as it is obviously damaged!

Anyway the above diagnosis does not solve the problem with not working
bundled driver for HL-1430.
It only reenables the old workaround :-(.


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31.4 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages foomatic-filters depends on:
ii  bash 4.0-4   The GNU Bourne Again SHell
ii  debconf [debconf-2.0]1.5.28  Debian configuration management sy
ii  libc62.10.1-7GNU C Library: Shared libraries
ii  libgs8   8.70~dfsg-2 The Ghostscript PostScript/PDF int
ii  perl 5.10.1-7Larry Wall's Practical Extraction 
ii  ucf  3.0024  Update Configuration File: preserv

Versions of packages foomatic-filters recommends:
ii  a2ps  1:4.14-1   GNU a2ps - 'Anything to PostScript
ii  cups  1.4.1-4Common UNIX Printing System(tm) - 
ii  cups-bsd [lpr]1.4.1-4Common UNIX Printing System(tm) - 
ii  cups-client

Bug#557421: Yet more details about lmms and jack problem

[wzabo...@elektron.elka.pw.edu.pl]

When I've longer used the lmms and jack, the following messages have
accumulated in the console where I've run lmms.
The lmms was still operational and prodoced sound transmitted through jack.

zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-01' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-02' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-02' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-03' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-04' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-05' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-05' was
assigned
cannot read server event (Połączenie zerwane przez drugą stronę)
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-05' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-05' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned
zombified - calling shutdown handler
there's already a client with name 'lmms', so unique name 'lmms-06' was
assigned





--
To UNSUBSCRI

Bug#557710: dssi: New upstream version 1.0.0 available

[wzabo...@elektron.elka.pw.edu.pl]

Package: dssi
Severity: wishlist

*** Please type your report below this line ***
I've just stated that the version of dssi in my system is 0.9.1-3
while there is the newer 1.0.0 version available at
http://dssi.sourceforge.net

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31.6 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#543923: It is easy to compile guitarix as a debian package from the original sources.

[wzabo...@elektron.elka.pw.edu.pl]

I've downloaded the sources of the newest Guitarix:
http://sourceforge.net/projects/guitarix/files/guitarix/guitarix-0.05.1-1/guitarix-0.05.1-1.tar.bz2/download
and unpacked it into the temporary directory.
In the README file I have found the following description:

[...]
 Debian
To build a Debian package, run "dpkg-buildpackage -rfakeroot -b"
[...]

However then I've got the following error message:

waf configure --prefix=/usr
make: waf: Command not found
make: *** [configure-stamp] Error 127
dpkg-buildpackage: error: debian/rules build gave error exit status 2

Obviously the system is not able to locate the "waf" program located in the
directory into which I've unpacked the sources.
To avoid this I've temporarily added the current directory to the PATH:

$ PATH=.:$PATH dpkg-buildpackage -rfakeroot -b

The above command has successfully built the working debian package:
guitarix_0.05.1-1_i386.deb
-- 
HTH, Wojtek






-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#560212: alsa-source: Driver snd-hrtimer - causing system freeze with Rosegarden

[wzabo...@elektron.elka.pw.edu.pl]

Package: alsa-source
Version: 1.0.21+dfsg-2
Severity: important

*** Please type your report below this line ***

When I try to use the "HR timer" as a MIDI sequencer timer in the
Rosegarden (http://www.rosegardenmusic.com) application, the system
freezes. Another people also reported similar problems with other
sequencer - OpenOctave (
https://linuxmusicians.com/viewtopic.php?f=27&p=8917 )

I have tested the problem on two SMP machines with diffrent kernels
(2.6.30, 2.6.31.6, 2.6.32).
The problem seems to be associated with the "snd-hrtimer" module.
I've tried to run the application vie remote X session, while having the
text console active.
Before the machine froze, the following messages have been displayed in
the console:

System 1 (Intel(R) Pentium(R) 4 CPU 2.80GHz HT)

hrtimer: interrupt too slow, forcing clock min delta to 3568 ns

System 2 (Intel(R) Core(TM)2 CPU T5500  @ 1.66GHz)
hrtimer: interrupt too slow, forcing clock min delta to 11103 ns
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec

Analyzing the problem, I had an idea, that maybe the snd-hrtimer should
be rewritten to call
the callback via tasklet (I attach my patch only as an ilustration, my
code doesn't work either),
 however then I got the message "BUG: scheduling while atomic" or
something like this
 from the snd_hrtimer_stop function called from _snd_timer_stop.
Therefore I've tried to investigate the snd_hrtimer_stop more thoroughly.

Looking further into the code, I have found, that snd_hrtimer_stop may
be called
from the callback routine (e.g.:
http://lxr.linux.no/linux+v2.6.32/sound/core/timer.c#L709 or
http://lxr.linux.no/linux+v2.6.32/sound/core/timer.c#L719 )

It seems to me, that calling hrtimer_cancel (in the original code),
which waits for the handler to finish,
from that handler  may lock the machine...
(snd_hrtimer_callback calls the snd_timer_interrupt:
http://lxr.linux.no/linux+v2.6.32/sound/core/hrtimer.c#L47
which in turn calls snd_hrtimer_stop (as above) which calls hrtimer_cancel).


Unfortunately currently I have no idea how to fix this problem. Maybe
snd_hrtimer_stop shouldn't try to cancel the timer,
instead setting a flag causing callback to return immediately without
rearming of the timer?

Wojtek Zabolotny
w...@ise.pw.edu.pl

PS. The above bug has been also reported to LKML

-- Package-specific info:
--- Begin additional package status ---
Desired=Unknown/Install/Remove/Purge/Hold
|
Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name   VersionDescription
+++-==-==-
ii  alsa-base  1.0.21+dfsg-2  ALSA driver configuration files
ii  libasound2 1.0.21a-1  shared library for ALSA applications
--- End additional package status ---
--- Begin /proc/asound/version ---
Advanced Linux Sound Architecture Driver Version 1.0.20.
--- End /proc/asound/version ---
--- Begin /proc/asound/cards ---
 0 [ICH5   ]: ICH4 - Intel ICH5
  Intel ICH5 with AD1985 at irq 17
 1 [UGM96  ]: USB-Audio - UGM96
  EGOSYS, Inc. UGM96 at usb-:00:1d.2-2, full speed
 2 [Xboard49   ]: USB-Audio - E-MU Xboard49
  E-MU Systems, Inc. E-MU Xboard49 at
usb-:00:1d.0-1.1, full speed
--- End /proc/asound/cards ---
--- Begin /dev/snd/ listing ---
total 0
drwxr-xr-x 2 root root   80 Dec  9 16:55 by-id
drwxr-xr-x 2 root root  100 Dec  9 16:55 by-path
crw-rw 1 root audio 116, 10 Dec  9 16:55 controlC0
crw-rw 1 root audio 116, 13 Dec  9 16:55 controlC1
crw-rw 1 root audio 116, 15 Dec  9 16:55 controlC2
crw-rw 1 root audio 116, 14 Dec  9 16:55 midiC2D0
crw-rw 1 root audio 116,  9 Dec  9 16:58 pcmC0D0c
crw-rw 1 root audio 116,  8 Dec  9 16:58 pcmC0D0p
crw-rw 1 root audio 116,  7 Dec  9 16:55 pcmC0D1c
crw-rw 1 root audio 116,  6 Dec  9 16:55 pcmC0D2c
crw-rw 1 root audio 116,  5 Dec  9 16:55 pcmC0D3c
crw-rw 1 root audio 116,  4 Dec  9 16:58 pcmC0D4p
crw-rw 1 root audio 116, 12 Dec  9 16:58 pcmC1D0c
crw-rw 1 root audio 116, 11 Dec  9 16:58 pcmC1D0p
crw-rw 1 root audio 116,  3 Dec  9 16:55 seq
crw-rw 1 root audio 116,  2 Dec  9 16:55 timer
--- End /dev/snd/ listing ---

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31.6.media (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages alsa-source depends on:
ii  bzip2 1.0.5-3high-quality block-sorting
file co
ii  debconf [debconf-2.0] 1.5.28 Debian configuration
management sy
ii  debconf-utils 1.5.28 de

Bug#552378: streamtuner segfaults when I select "tune in"

[wzabo...@elektron.elka.pw.edu.pl]

Package: streamtuner
Version: 0.99.99-15
Severity: normal

*** Please type your report below this line ***
Whenever I select the strem and press "tune in", the streamtuner segfaults.
I have changed the default configuration to use audacious instead of xmms.

When starting from gdb I was able to get the following backtrace:

$ gdb `which streamtuner`
GNU gdb (GDB) 7.0-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/bin/streamtuner...(no debugging symbols
found)...done.
(gdb) run
Starting program: /usr/bin/streamtuner 
[Thread debugging using libthread_db enabled]
[New Thread 0xb53fcb90 (LWP 9081)]
[Thread 0xb53fcb90 (LWP 9081) exited]
[New Thread 0xb53fcb90 (LWP 9082)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb53fcb90 (LWP 9082)]
0xb71c5dc3 in ?? () from /usr/lib/libpixman-1.so.0
(gdb) bt
#0  0xb71c5dc3 in ?? () from /usr/lib/libpixman-1.so.0
#1  0xb71ce3aa in ?? () from /usr/lib/libpixman-1.so.0
#2  0xb71cf438 in ?? () from /usr/lib/libpixman-1.so.0
#3  0xb71c5da3 in ?? () from /usr/lib/libpixman-1.so.0
#4  0xb719faf3 in ?? () from /usr/lib/libpixman-1.so.0
#5  0xb71c7e72 in ?? () from /usr/lib/libpixman-1.so.0
#6  0xb719faf3 in ?? () from /usr/lib/libpixman-1.so.0
#7  0xb71d35d3 in ?? () from /usr/lib/libpixman-1.so.0
#8  0xb719faf3 in ?? () from /usr/lib/libpixman-1.so.0
#9  0xb71da95b in ?? () from /usr/lib/libpixman-1.so.0
#10 0xb719faf3 in ?? () from /usr/lib/libpixman-1.so.0
#11 0xb71c6c8c in pixman_image_composite () from /usr/lib/libpixman-1.so.0
#12 0xb76d8568 in ?? () from /usr/lib/libcairo.so.2
#13 0xb76ed571 in ?? () from /usr/lib/libcairo.so.2
#14 0xb76f11e4 in ?? () from /usr/lib/libcairo.so.2
#15 0xb76f0247 in ?? () from /usr/lib/libcairo.so.2
#16 0xb76f0cc5 in ?? () from /usr/lib/libcairo.so.2
#17 0xb76f111a in ?? () from /usr/lib/libcairo.so.2
#18 0xb76ed742 in ?? () from /usr/lib/libcairo.so.2
#19 0xb76d4b5a in ?? () from /usr/lib/libcairo.so.2
#20 0xb76cecfd in cairo_fill_preserve () from /usr/lib/libcairo.so.2
#21 0xb76ced22 in cairo_fill () from /usr/lib/libcairo.so.2
#22 0xb53b35f6 in ?? () from /usr/lib/librsvg-2.so.2
#23 0xb53ad85e in ?? () from /usr/lib/librsvg-2.so.2
#24 0xb53a2b5b in ?? () from /usr/lib/librsvg-2.so.2
#25 0xb53a6119 in ?? () from /usr/lib/librsvg-2.so.2
#26 0xb53a65aa in ?? () from /usr/lib/librsvg-2.so.2
#27 0xb53a6119 in ?? () from /usr/lib/librsvg-2.so.2
#28 0xb53a65aa in ?? () from /usr/lib/librsvg-2.so.2
#29 0xb53a6119 in ?? () from /usr/lib/librsvg-2.so.2
#30 0xb53a64aa in ?? () from /usr/lib/librsvg-2.so.2
#31 0xb53a6119 in ?? () from /usr/lib/librsvg-2.so.2
#32 0xb53b3fa9 in rsvg_handle_render_cairo_sub () from /usr/lib/librsvg-2.so.2
#33 0xb53b44f0 in rsvg_handle_get_pixbuf_sub () from /usr/lib/librsvg-2.so.2
#34 0xb53b45a5 in rsvg_handle_get_pixbuf () from /usr/lib/librsvg-2.so.2
#35 0xb6376b0a in ?? () from /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so
#36 0xb7b4f409 in gdk_pixbuf_loader_close ()
   from /usr/lib/libgdk_pixbuf-2.0.so.0
#37 0xb7b4c9c8 in ?? () from /usr/lib/libgdk_pixbuf-2.0.so.0
#38 0xb7b4cafd in gdk_pixbuf_new_from_stream_at_scale ()
   from /usr/lib/libgdk_pixbuf-2.0.so.0
#39 0xb7cf8ba0 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#40 0xb7cf9391 in gtk_icon_info_load_icon () from /usr/lib/libgtk-x11-2.0.so.0
#41 0xb7cfb78b in gtk_icon_theme_load_icon () from /usr/lib/libgtk-x11-2.0.so.0
#42 0xb7cf578a in gtk_icon_set_render_icon () from /usr/lib/libgtk-x11-2.0.so.0
#43 0xb7e5711a in gtk_widget_render_icon () from /usr/lib/libgtk-x11-2.0.so.0
#44 0xb7d0da46 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#45 0xb7d0da71 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#46 0xb7b1fbac in g_cclosure_marshal_VOID__BOXED ()
   from /usr/lib/libgobject-2.0.so.0
#47 0xb7b11569 in ?? () from /usr/lib/libgobject-2.0.so.0
#48 0xb7b12d18 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#49 0xb7b26778 in ?? () from /usr/lib/libgobject-2.0.so.0
#50 0xb7b28359 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#51 0xb7b28655 in g_signal_emit_by_name () from /usr/lib/libgobject-2.0.so.0
#52 0xb7da1b16 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#53 0xb7da1dc7 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#54 0xb7e5622f in gtk_widget_size_request () from /usr/lib/libgtk-x11-2.0.so.0
#55 0xb7c6a1dc in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#56 0xb7b1fbac in g_cclosure_marshal_VOID__BOXED ()
   from /usr/lib/libgobject-2.0.so.0
#57 0xb7b11569 in ?? () from /usr/lib/libgobject-2.0.so.0
#58 0xb7b12d18 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#59 0xb7b26778 in ?? () from /usr/lib/libgobject-

Bug#561863: freehdl: gvhdl script lacks the "--tag" command. Proposal of fix included

[wzabo...@elektron.elka.pw.edu.pl]

Package: freehdl

Version: 0.0.7-1

Severity: important

*** Please type your report below this line ***

When I try to compile the VHDL file (e.g. the rec_tb.vhd) I get the

following results:

$ ./gvhdl rec_tb.vhd --libieee

gvhdl: FreeHDL root path is '/usr'.

gvhdl: executing '/usr/bin/freehdl-v2cc -m rec_tb._main_.cc -L

/usr/share/freehdl/lib   -o rec_tb.cc rec_tb.vhd'

gvhdl:

gvhdl: 

gvhdl: Compiling 'rec_tb.cc'...

gvhdl: 

gvhdl: g++-4.3  -I /usr/include -c rec_tb.cc

gvhdl:

gvhdl: 

gvhdl: Compiling simulator main file 'rec_tb._main_.cc'...

gvhdl: 

gvhdl: g++-4.3  -I /usr/include -c rec_tb._main_.cc

gvhdl: Linking simulator 'rec_tb'...

gvhdl: libtool --mode=link g++-4.3  rec_tb._main_.o  rec_tb.o -lm

/usr/lib/libfreehdl-kernel.la /usr/lib/libfreehdl-std.la

/ /usr/lib/freehdl/libieee.la -o rec_tb

linker: libtool: link: unable to infer tagged configuration

linker: libtool: link: specify a tag with `--tag'

gvhdl: Linking failed!

Died at ./gvhdl line 276.

I've checked the /usr/bin/gvhdl script, and found the following definition

(in the 8th line):

my $libtool_options = "--mode=link"; 

I've modified it to:

my $libtool_options = "--mode=link --tag CXX";

and then my VHDL file compiles cleanly.

$ gvhdl rec_tb.vhd --libieee

gvhdl: FreeHDL root path is '/usr'.

gvhdl: executing '/usr/bin/freehdl-v2cc -m rec_tb._main_.cc -L 
/usr/share/freehdl/lib   -o rec_tb.cc rec_tb.vhd'

gvhdl:

gvhdl: 

gvhdl: Compiling 'rec_tb.cc'...

gvhdl: 

gvhdl: g++-4.3  -I /usr/include -c rec_tb.cc

gvhdl:

gvhdl: 

gvhdl: Compiling simulator main file 'rec_tb._main_.cc'...

gvhdl: 

gvhdl: g++-4.3  -I /usr/include -c rec_tb._main_.cc

gvhdl: Linking simulator 'rec_tb'...

gvhdl: libtool --mode=link --tag CXX g++-4.3  rec_tb._main_.o  rec_tb.o -lm 
/usr/lib/libfreehdl-kernel.la /usr/lib/libfreehdl-std.la 
/usr/lib/freehdl/libieee.la -o rec_tb

linker: libtool: link: g++-4.3 rec_tb._main_.o rec_tb.o -o rec_tb  -lm 
/usr/lib/libfreehdl-kernel.so /usr/lib/libfreehdl-std.so 
/usr/lib/freehdl/libieee.so -Wl,-rpath -Wl,/usr/lib/freehdl -Wl,-rpath 
-Wl,/usr/lib/freehdl

gvhdl: 

gvhdl: Simulator 'rec_tb' created.

gvhdl: 

-- 
Wojciech Zabolotny
w...@ise.pw.edu.pl

-- System Information:

Debian Release: squeeze/sid

  APT prefers testing

  APT policy: (990, 'testing'), (100, 'stable'), (50, 'unstable')

Architecture: i386 (i686)

Kernel: Linux 2.6.32.media (SMP w/2 CPU cores; PREEMPT)

Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)

Shell: /bin/sh linked to /bin/bash

Versions of packages freehdl depends on:

ii  g++   4:4.3.4-1  The GNU C++ compiler

ii  guile-1.8 [guile] 1.8.7+1-2  The GNU extension language and Sch

ii  libc6 2.10.2-2   GNU C Library: Shared libraries

ii  libfreehdl0   0.0.7-1VHDL simulator for Linux (shared l

ii  libfreehdl0-dev   0.0.7-1VHDL simulator for Linux (developm

ii  libgcc1   1:4.4.2-3  GCC support library

ii  libstdc++64.4.2-3The GNU Standard C++ Library v3

ii  libtool   2.2.6b-2   Generic library support script

freehdl recommends no packages.

freehdl suggests no packages.

-- no debconf information




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#626918: The problem disappeared, when I recompiled python-visual from source package

[wzabo...@elektron.elka.pw.edu.pl]

I have simply performed in a temporary directory:

$ apt-get source python visual
$ cd python-visual-5.12
$ fakeroot dpkg-buildpackage
$ cd ..
$ su -c " dpkg -i python-visual_5.12-1.1_i386.deb "

And problem disappeared.
However the dependency of cvisualmodule.so has changed to:
libboost_python-py26.so.1.46.1 => 
/usr/lib/libboost_python-py26.so.1.46.1 (0xb5f15000)




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#904493: Cause of the error found, proposal of solution

[wzabo...@elektron.elka.pw.edu.pl]

The source of the problem is obviously the implementation of the
getJavaVersion function (in Utils.Java).
It does not accept Java 11 that reports its version as a two character
string "11":

    /**
 * Returns the main version number of the current JRE, e.g.
 * 1.4 for version 1.4.2_03
 */
    public static double getJavaVersion() {
    String vm_version = System.getProperty("java.version");
    if (vm_version == null)
        return Double.NaN;

    if (vm_version.startsWith("1.4.2"))
        return 1.42;
    else
        vm_version = vm_version.substring(0, 3);
    try {
        return Double.parseDouble(vm_version);
    } catch (Exception e) {
        return Double.NaN;
    }
    }

I'd suggest modification of the above function so, that truncates the
string at the second point (if it exists) and then converts the string
to the number.

Regards,
Wojtek

Bug#879713: Acknowledgement (konsole: Konsole freezes for a minute when I press backspace in empty command line)

[wzabo...@elektron.elka.pw.edu.pl]

Hi,
I have checked, that other terminals available in MATE like

  * xterm
  * mate-terminal
  * xfce4-terminal

are not affected by the above problem. Only konsole windows freeze when
I press backspace in the empty commandline.

Regards,

Wojtek

-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#878000: ardour5 does not start on debian/testing it spins trying to load GTK2 breeze theme

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 08.10.2017 o 14:53, Jonas Smedegaard pisze:
> Quoting wzabo...@elektron.elka.pw.edu.pl (2017-10-08 14:38:01)
>> W dniu 08.10.2017 o 14:13, Jonas Smedegaard pisze:
>>> Quoting Wojciech Zabołotny (2017-10-08 13:34:16)
>>>> When I start the jack server, and then ardour5, it does not start.
>>>> The "top" shows that ardour5 uses one CPU core in 100%.
>>>> When I start it via "strace", I get the following messages displayed
>>>> repeatedly:
>>> [...]
>>>> It looks, that ardour tries to load the Breeze gtk theme, and when it 
>>>> fails,
>>>> it repeats that forever.
>>>> I can see two problems there:
>>>> 1. ardour should depend on the appropriate package providing the required
>>>>GUI theme
>>>> 2. ardour should fail, displaying the reasonable error message without
>>>>looping forever.
>>> Ardour does _not_ depend on a specific GTK+ widget theme.
>>>
>>> Perhaps a bug elsewhere - e.g. in GTK+ or that particular theme - is 
>>> triggered?
>>>
>>> Did you configure your environment to use Breeze?  Could you please try 
>>> switch to a different GTK+ theme instead?
>>>
>>> Perhaps create a temporary new user on your system and start Ardour from 
>>> there - to help avoid cruft in your own $HOME environment interfering.
>>>
>> Dear Jonas,
>>
>> Thanks a lot for your suggestions.
>>
>> That's interesting. Of course, I have cleaned up the ~/.config/ardour4
>> and ~/.config/ardour5 directories before submitting the first report,
>> and it didn't help.
> So you tried cleanup, but only the (too narrow) part you suspected to 
> cause the error.
>
>
>> However indeed, when I logged in as another user, ardour started 
>> correctly.
> Good to hear!
>
>
>
>
>> So the problem probably indeed is not ardour related (however I don't 
>> know why only ardour suffers from that).
> It might very well be that Ardour is particularly vulnerable to being 
> fed a broken GTK+ theme.  Which seems to be the case here.
>
>
>> PS. Is it possible that 
>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=874598 is caused by 
>> the same problem?
> Possibly, yes.  But instead of (again) too narrowly draw conclusion best 
> to find something that works (e.g. a fresh account) and triangulate from 
> there, as you did here.
>
Yes, I do agree. However I think that the important news for other
affected users is that removal of ~/.gtkrc-2.0 (if exists) may help.
Otherwise the user would be forced to wipe his account...

Regards,
Wojtek
-- 

Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#878000: ardour5 does not start on debian/testing it spins trying to load GTK2 breeze theme

[wzabo...@elektron.elka.pw.edu.pl]

W dniu 08.10.2017 o 14:13, Jonas Smedegaard pisze:
> Hi Wojciech,
>
> First of all, thanks for reporting this!
>
> Quoting Wojciech Zabołotny (2017-10-08 13:34:16)
>> When I start the jack server, and then ardour5, it does not start.
>> The "top" shows that ardour5 uses one CPU core in 100%.
>> When I start it via "strace", I get the following messages displayed
>> repeatedly:
> [...]
>> It looks, that ardour tries to load the Breeze gtk theme, and when it fails,
>> it repeats that forever.
>> I can see two problems there:
>> 1. ardour should depend on the appropriate package providing the required
>>GUI theme
>> 2. ardour should fail, displaying the reasonable error message without
>>looping forever.
> Ardour does _not_ depend on a specific GTK+ widget theme.
>
> Perhaps a bug elsewhere - e.g. in GTK+ or that particular theme - is 
> triggered?
>
> Did you configure your environment to use Breeze?  Could you please try 
> switch to a different GTK+ theme instead?
>
> Perhaps create a temporary new user on your system and start Ardour from 
> there - to help avoid cruft in your own $HOME environment interfering.
>
Dear Jonas,

Thanks a lot for your suggestions.

That's interesting. Of course, I have cleaned up the ~/.config/ardour4
and ~/.config/ardour5 directories before submitting the first report,
and it didn't help.

However indeed, when I logged in as another user, ardour started correctly.

I have dumped the whole strace output with : "strace -o
/tmp/ardour_strace.txt ardour5"
And then I've checked what config files are read before the first
access("/usr/share/themes/Breeze/gtk-2.0/widgets/../assets/check-unchecked.png",
F_OK) = -1 ENOENT (No such file or directory)

The problematic file was:
open("/home/wzab/.gtkrc-2.0", O_RDONLY) = 11
with the following content:

===
include "/usr/share/themes/Breeze/gtk-2.0/gtkrc"
style "user-font"
{
    font_name="Noto Sans Regular"
}
widget_class "*" style "user-font"
gtk-font-name="Noto Sans Regular 10"
gtk-theme-name="Breeze"
gtk-icon-theme-name="breeze"
gtk-fallback-icon-theme="gnome"
gtk-toolbar-style=GTK_TOOLBAR_ICONS
gtk-menu-images=1
gtk-button-images=1
===

After I have renamed that file to "/home/wzab/.gtkrc-2.0.deleted" , the
problem disappeared.
So the problem probably indeed is not ardour related (however I don't
know why only ardour suffers from that).

Regards,
Wojtek

PS. Is it possible that
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=874598 is caused by
the same problem?

-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: Problem occurs in 4.13 and 4.14, but not in 4.12

[wzabo...@elektron.elka.pw.edu.pl]

I have repeated my tests, starting my Debian/testing system with the
4.13.0-2 kernel, and the same problem occured.
Then I have started the system with yet older 4.12.0-2 kernel
( uname -a returns: Linux wzab 4.12.0-2-amd64 #1 SMP Debian 4.12.13-1
(2017-09-19) x86_64 GNU/Linux )

Now the vhci_hcd driver loads correctly:

[  240.938326] usbip_core: USB/IP Core v1.0.0
[  240.949762] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[  240.949768] vhci_hcd vhci_hcd: new USB bus registered, assigned bus
number 5
[  240.949797] vhci_hcd: created sysfs vhci_hcd
[  240.949873] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[  240.949876] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.949878] usb usb5: Product: USB/IP Virtual Host Controller
[  240.949880] usb usb5: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.949882] usb usb5: SerialNumber: vhci_hcd
[  240.950101] hub 5-0:1.0: USB hub found
[  240.950110] hub 5-0:1.0: 31 ports detected
[  240.950872] vhci_hcd vhci_hcd.1: USB/IP Virtual Host Controller
[  240.950875] vhci_hcd vhci_hcd.1: new USB bus registered, assigned bus
number 6
[  240.950956] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[  240.950964] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.950973] usb usb6: Product: USB/IP Virtual Host Controller
[  240.950981] usb usb6: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.950984] usb usb6: SerialNumber: vhci_hcd.1
[  240.951297] hub 6-0:1.0: USB hub found
[  240.951314] hub 6-0:1.0: 31 ports detected
[  240.952645] vhci_hcd vhci_hcd.2: USB/IP Virtual Host Controller
[  240.952651] vhci_hcd vhci_hcd.2: new USB bus registered, assigned bus
number 7
[  240.952720] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[  240.952724] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.952727] usb usb7: Product: USB/IP Virtual Host Controller
[  240.952730] usb usb7: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.952734] usb usb7: SerialNumber: vhci_hcd.2
[  240.953124] hub 7-0:1.0: USB hub found
[  240.953140] hub 7-0:1.0: 31 ports detected
[  240.954167] vhci_hcd vhci_hcd.3: USB/IP Virtual Host Controller
[  240.954171] vhci_hcd vhci_hcd.3: new USB bus registered, assigned bus
number 8
[  240.954215] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[  240.954218] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.954220] usb usb8: Product: USB/IP Virtual Host Controller
[  240.954222] usb usb8: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.954224] usb usb8: SerialNumber: vhci_hcd.3
[  240.954442] hub 8-0:1.0: USB hub found
[  240.954453] hub 8-0:1.0: 31 ports detected
[  240.955338] vhci_hcd vhci_hcd.4: USB/IP Virtual Host Controller
[  240.955342] vhci_hcd vhci_hcd.4: new USB bus registered, assigned bus
number 9
[  240.955388] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[  240.955391] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.955393] usb usb9: Product: USB/IP Virtual Host Controller
[  240.955395] usb usb9: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.955397] usb usb9: SerialNumber: vhci_hcd.4
[  240.955615] hub 9-0:1.0: USB hub found
[  240.955626] hub 9-0:1.0: 31 ports detected
[  240.956650] vhci_hcd vhci_hcd.5: USB/IP Virtual Host Controller
[  240.956654] vhci_hcd vhci_hcd.5: new USB bus registered, assigned bus
number 10
[  240.956698] usb usb10: New USB device found, idVendor=1d6b,
idProduct=0002
[  240.956701] usb usb10: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.956704] usb usb10: Product: USB/IP Virtual Host Controller
[  240.956706] usb usb10: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.956708] usb usb10: SerialNumber: vhci_hcd.5
[  240.956941] hub 10-0:1.0: USB hub found
[  240.956951] hub 10-0:1.0: 31 ports detected
[  240.958709] vhci_hcd vhci_hcd.6: USB/IP Virtual Host Controller
[  240.958714] vhci_hcd vhci_hcd.6: new USB bus registered, assigned bus
number 11
[  240.958950] usb usb11: New USB device found, idVendor=1d6b,
idProduct=0002
[  240.958952] usb usb11: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.958953] usb usb11: Product: USB/IP Virtual Host Controller
[  240.958954] usb usb11: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.958955] usb usb11: SerialNumber: vhci_hcd.6
[  240.959145] hub 11-0:1.0: USB hub found
[  240.959398] hub 11-0:1.0: 31 ports detected
[  240.964367] vhci_hcd vhci_hcd.7: USB/IP Virtual Host Controller
[  240.964370] vhci_hcd vhci_hcd.7: new USB bus registered, assigned bus
number 12
[  240.964393] usb usb12: New USB device found, idVendor=1d6b,
idProduct=0002
[  240.964394] usb usb12: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  240.964395] usb usb12: Product: USB/IP Virtual Host Controller
[  240.964396] usb usb12: Manufacturer: Linux 4.12.0-2-amd64 vhci_hcd
[  240.964397] usb usb12: SerialNumber: vhci_hcd.7
[  240.965612]

Bug#891039: libusbip: error: port number exceeds 128

[wzabo...@elektron.elka.pw.edu.pl]

Package: usbip
Version: 2.0+4.14.13-1
Severity: important

Dear Maintainer,

When I try to access the USB devices exported with usbip from another
machine,
even before I try to access the remote usbip server I gaet the strange
error:

# modprobe vhci-hcd
# usbip port
libusbip: error: port number exceeds 128
usbip: error: open vhci_driver
usbip: error: list imported devices

Of course I'm not able to attach any device.

# usbip attach -b 4-1 -r 192.168.0.82
libusbip: error: port number exceeds 128
usbip: error: open vhci_driver
usbip: error: query

Even though the device is visible for my machine:
# usbip list -r 192.168.0.82
Exportable USB devices
==
 - 192.168.0.82
4-1: C-Media Electronics, Inc. : Audio Adapter (0d8c:000c)
   : /sys/devices/platform/soc/1c1b400.usb/usb4/4-1
   : (Defined at Interface level) (00/00/00)
   :  0 - Audio / Control Device / unknown protocol (01/01/00)
   :  1 - Audio / Streaming / unknown protocol (01/02/00)
   :  2 - Audio / Streaming / unknown protocol (01/02/00)
   :  3 - Human Interface Device / No Subclass / None (03/00/00)

I have attempted to attach the device to the virtual machine (Knoppix
8.1) running under QEMU. Everything worked correctly. So obviously it is
a problem with the current version of Debian/testing.

-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.14.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8),
LANGUAGE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages usbip depends on:
ii  libc6 2.26-6
ii  libudev1  236-3
ii  libwrap0  7.6.q-27
ii  usbutils  1:007-4+b1

usbip recommends no packages.

usbip suggests no packages.

-- no debconf information

Bug#891039: Duplicate report

[wzabo...@elektron.elka.pw.edu.pl]

Please remove that report or at least join it with 891036.

I have resubmitted the report, as it seemed that 891036 was rejected.

-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: Problem still persists in kernel 4.15

[wzabo...@elektron.elka.pw.edu.pl]

I have installed the kernel 4.15 from Debian/sid
Now I get the following messages in kernel log after "modprobe vhci-hcd":

[  234.776615] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[  234.776622] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus
number 5
[  234.776649] vhci_hcd: created sysfs vhci_hcd.0
[  234.776715] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[  234.776719] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.776723] usb usb5: Product: USB/IP Virtual Host Controller
[  234.776726] usb usb5: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.776729] usb usb5: SerialNumber: vhci_hcd.0
[  234.776945] hub 5-0:1.0: USB hub found
[  234.776958] hub 5-0:1.0: 15 ports detected
[  234.777424] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[  234.777428] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus
number 6
[  234.777457] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[  234.777498] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[  234.777502] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.777505] usb usb6: Product: USB/IP Virtual Host Controller
[  234.777508] usb usb6: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.777511] usb usb6: SerialNumber: vhci_hcd.0
[  234.12] hub 6-0:1.0: USB hub found
[  234.24] hub 6-0:1.0: 15 ports detected
[  234.778341] vhci_hcd vhci_hcd.1: USB/IP Virtual Host Controller
[  234.778345] vhci_hcd vhci_hcd.1: new USB bus registered, assigned bus
number 7
[  234.778399] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[  234.778402] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.778405] usb usb7: Product: USB/IP Virtual Host Controller
[  234.778408] usb usb7: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.778411] usb usb7: SerialNumber: vhci_hcd.1
[  234.778627] hub 7-0:1.0: USB hub found
[  234.778638] hub 7-0:1.0: 15 ports detected
[  234.779078] vhci_hcd vhci_hcd.1: USB/IP Virtual Host Controller
[  234.779081] vhci_hcd vhci_hcd.1: new USB bus registered, assigned bus
number 8
[  234.779113] usb usb8: We don't know the algorithms for LPM for this
host, disabling LPM.
[  234.779153] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[  234.779157] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.779160] usb usb8: Product: USB/IP Virtual Host Controller
[  234.779163] usb usb8: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.779166] usb usb8: SerialNumber: vhci_hcd.1
[  234.779348] hub 8-0:1.0: USB hub found
[  234.779360] hub 8-0:1.0: 15 ports detected
[  234.779985] vhci_hcd vhci_hcd.2: USB/IP Virtual Host Controller
[  234.779988] vhci_hcd vhci_hcd.2: new USB bus registered, assigned bus
number 9
[  234.780041] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[  234.780045] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.780048] usb usb9: Product: USB/IP Virtual Host Controller
[  234.780051] usb usb9: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.780054] usb usb9: SerialNumber: vhci_hcd.2
[  234.780243] hub 9-0:1.0: USB hub found
[  234.780254] hub 9-0:1.0: 15 ports detected
[  234.780779] vhci_hcd vhci_hcd.2: USB/IP Virtual Host Controller
[  234.780784] vhci_hcd vhci_hcd.2: new USB bus registered, assigned bus
number 10
[  234.780816] usb usb10: We don't know the algorithms for LPM for this
host, disabling LPM.
[  234.780863] usb usb10: New USB device found, idVendor=1d6b,
idProduct=0003
[  234.780868] usb usb10: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.780871] usb usb10: Product: USB/IP Virtual Host Controller
[  234.780875] usb usb10: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.780878] usb usb10: SerialNumber: vhci_hcd.2
[  234.781116] hub 10-0:1.0: USB hub found
[  234.781127] hub 10-0:1.0: 15 ports detected
[  234.781634] vhci_hcd vhci_hcd.3: USB/IP Virtual Host Controller
[  234.781637] vhci_hcd vhci_hcd.3: new USB bus registered, assigned bus
number 11
[  234.781680] usb usb11: New USB device found, idVendor=1d6b,
idProduct=0002
[  234.781683] usb usb11: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.781685] usb usb11: Product: USB/IP Virtual Host Controller
[  234.781687] usb usb11: Manufacturer: Linux 4.15.0-1-amd64 vhci_hcd
[  234.781689] usb usb11: SerialNumber: vhci_hcd.3
[  234.781844] hub 11-0:1.0: USB hub found
[  234.781853] hub 11-0:1.0: 15 ports detected
[  234.782195] vhci_hcd vhci_hcd.3: USB/IP Virtual Host Controller
[  234.782198] vhci_hcd vhci_hcd.3: new USB bus registered, assigned bus
number 12
[  234.782218] usb usb12: We don't know the algorithms for LPM for this
host, disabling LPM.
[  234.782249] usb usb12: New USB device found, idVendor=1d6b,
idProduct=0003
[  234.782252] usb usb12: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[  234.782254] usb usb12: Product: USB/IP Virtual Host Controller
[ 

Bug#891036: Even after updating "usbip" to usbip_2.0+4.15.4-1_amd64.deb problem remains

[wzabo...@elektron.elka.pw.edu.pl]

I have also updated the "usbip" package to version
usbip_2.0+4.15.4-1_amd64.deb

However, the problem with the number of ports still exists:

# usbip port
libusbip: error: port number exceeds 128
usbip: error: open vhci_driver
usbip: error: list imported devices


-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: The problem is related to the number of ports created in vhci_hcd.0

[wzabo...@elektron.elka.pw.edu.pl]

On the system where I have installed the 4.15.xxx kernel and usbip from
Debian/sid, I get the following results from "usbip --debug port":

[...]
usbip: debug: names.c:428:[parse] line 18068 subclass fe:02 IRDA Bridge
usbip: debug: names.c:428:[parse] line 18069 subclass fe:03 Test and
Measurement
usbip: debug: names.c:461:[parse] line 18070 protocol fe:03:01 TMC
usbip: debug: names.c:461:[parse] line 18071 protocol fe:03:02 USB488
usbip: debug: names.c:374:[parse] line 18072 class ff Vendor Specific Class
usbip: debug: names.c:428:[parse] line 18073 subclass ff:ff Vendor
Specific Subclass
usbip: debug: names.c:461:[parse] line 18074 protocol ff:ff:ff Vendor
Specific Protocol
libusbip: debug: vhci_driver.c:264:[usbip_vhci_driver_open] available
ports: 240
libusbip: error: port number exceeds 128
usbip: error: open vhci_driver
usbip: error: list imported devices

The line where the condition is checked is
https://elixir.bootlin.com/linux/v4.15.4/source/tools/usb/usbip/libsrc/vhci_driver.c#L263

vhci_driver
->nports = 
get_nports ();
dbg ("available
ports: %d", vhci_driver
->nports);

if (vhci_driver
->nports <= 0) {
err("no available ports");
goto err;
} else if (vhci_driver
->nports > MAXNPORT 
) {
err("port number exceeds %d", MAXNPORT 
);
goto err;
}

Maybe the viable workaround would be just to increase the MAXNPORT number?

-- 

Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: The problem is related to the number of ports created in vhci_hcd.0

[wzabo...@elektron.elka.pw.edu.pl]

In fact I don't understand how the vhci_hcd is supposed to work.

The constants are defined as follows:
https://elixir.bootlin.com/linux/v4.15.4/source/drivers/usb/usbip/vhci.h#L75

/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
#ifdef CONFIG_USBIP_VHCI_HC_PORTS
#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS
#else
#define VHCI_HC_PORTS 8
#endif

/* Each VHCI has 2 hubs (USB2 and USB3), each has VHCI_HC_PORTS ports */
#define VHCI_PORTS    (VHCI_HC_PORTS*2)

#ifdef CONFIG_USBIP_VHCI_NR_HCS
#define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS
#else
#define VHCI_NR_HCS 1
#endif

#define MAX_STATUS_NAME 16

Then in the line
https://elixir.bootlin.com/linux/v4.15.4/source/drivers/usb/usbip/vhci_hcd.c#L46
we can see:

int vhci_num_controllers = VHCI_NR_HCS;

But, when I have unpacked the sources of the Debian kernel:

("apt source usbip" downloads and unpacks the kernel sources)

In the debian/config/config I can see:

CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=15
CONFIG_USBIP_VHCI_NR_HCS=8
CONFIG_USBIP_HOST=m

So the number of created controllers is equal to 8, and for each
controller there are 30 ports created (2 * 15)

That results in 240 ports, that is above the MAXNPORT number defined in

https://elixir.bootlin.com/linux/v4.15.4/source/tools/usb/usbip/libsrc/vhci_driver.h#L16
#define MAXNPORT 128

To obtain the working configuration it is necessary either to increase
the MAXNPORT to 240 or even to 256 or to decrease the
CONFIG_USBIP_VHCI_NR_HCS to 4


-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: Workaround found, the problem is with Debian configuration of kernel

[wzabo...@elektron.elka.pw.edu.pl]

I have recompiled the kernel with modifed settings:

In the debian/config/config I have changed:
from
CONFIG_USBIP_VHCI_NR_HCS=8
to
CONFIG_USBIP_VHCI_NR_HCS=4

After installing the modified kernel I was able to get my remote device
attached and it worked correctly.

Probably the problem could be also solved by increasing the  MAXNPORT
from 128 to  240 or even to 256 in tools/usb/usbip/libsrc/vhci_driver.h
(modifying the kernel sources instead of the Debian configuration), but
I have not verified yet if that approach works.

-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology

Bug#891036: Proposal - how to make usbip more resistant to misconfiguration

[wzabo...@elektron.elka.pw.edu.pl]

Hi,

I have found that the
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891036 is not the only
one related to misconfiguration of the usbip driver and tools.
A few weeks ago the similar bug
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=878866 was discovered.
It seems that the configuration of usbip is fragile, and it is easy to
make a mistake leading to the setup that doesn't work correctly.
I suppose, that additional mechanisms should be added to prevent such
problems:

 1. It should be checked DURING THE COMPILATION, that the number of
ports in a single virtual hub does not exceed 128.
 2. The MAXNPORT constant in tools/usb/usbip/libsrc/vhci_driver.h should
be defined as:
#define MAXNPORT ( VHCI_PORTS * VHCI_NR_HCS )

I have not tested the above modifications. If I find some time to verify
them, and if they are correct, I'll submit the official patches.

With best regards,
Wojtek

-- 
Wojciech M Zabolotny, PhD
Institute of Electronic Systems
Faculty of Electronics and Information Technology
Warsaw University of Technology