I have the same SCSI controller AIC-7XXX on my Dell 2400 PowerEdge and I was able to load Redhat 7.3 without any problems.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of J Hayward Sent: Friday, May 10, 2002 3:07 PM To: [EMAIL PROTECTED] Subject: Re: 7.3 Install Problem - AIC-7XXX Kernel panic - for safety On Fri, 2002-05-10 at 13:09, Mike Pelley wrote: > > When I boot from the CD, the boot starts as normal. Once it gets > past the new (and nice!) boot screen into the install screen it gets > as far as the AIC-7XXX detection when it halts with the error: > Kernel Panic: For safety > > I've tried installing without probing, but as soon as I select the > AIC-7XXX devices, the same error occurs. > You might look and see if you can do an expert install and see if there is an option to load the old aic7xxx driver instead of the new one. I see the old aic7xxx driver module is included in the kernel after I installed, but I don't know if it is included in the installer kernel. You might also try temporarily disconnecting your Jaz drive and/or your tape drive and see if the kernel panic still happens. Regards, Jim H _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
