Thanks, Bret.  I'll give it a try.



Hidong



Bret Hughes wrote:
> 
> Hidong Kim wrote:
> 
> > Hi,
> >
> > I have an ibm thinkpad with a linksys pcmlm56 etherfast+modem pcmcia
> > card.  When I initially installed red hat 6.1 on the system a few weeks
> > ago, the linksys was detected automatically and worked fine.  I just
> > recompiled the kernel (2.2.12-20 from the red hat cd), and now the
> > linksys card is not detected, and I can't configure eth0.  How do I get
> > this card to be detected after recompiling the kernel?  Thanks,
> 
> I have not had this exact problem but do have on working on a dell laptop
> with RH62.  First thing that comes to mind for me is the pcmcia services.
> are they started?  Can you see the modem?  My conf.modules looks like
> this:
> 
> alias parport_lowlevel parport_pc
> pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
> alias eth0 tulip
> alias char-major-108 off
> 
> In /var/log/messages I have:
> 
> Jul 17 09:42:16 bretdell_linux pcmcia: Starting PCMCIA services:
> Jul 17 09:42:16 bretdell_linux pcmcia:  modules
> Jul 17 09:42:16 bretdell_linux kernel: Linux PCMCIA Card Services 3.1.8
> Jul 17 09:42:16 bretdell_linux kernel:   kernel build: 2.2.14-5.0 #1 Tue
> Mar 7 21:07:39 EST 2000
> Jul 17 09:42:16 bretdell_linux kernel:   options:  [pci] [cardbus] [apm]
> Jul 17 09:42:16 bretdell_linux kernel: Intel PCIC probe:
> Jul 17 09:42:16 bretdell_linux kernel:   TI 1220 PCI-to-CardBus at bus 0
> slot 4, mem 0x68000000, 2 sockets
> Jul 17 09:42:16 bretdell_linux kernel:     host opts [0]: [ring] [pwr
> save] [serial pci & irq] [no pci irq] [lat 168/176] [bus 32/34]
> Jul 17 09:42:16 bretdell_linux kernel:     host opts [1]: [ring] [pwr
> save] [serial pci & irq] [no pci irq] [lat 168/176] [bus 35/37]
> Jul 17 09:42:16 bretdell_linux kernel:     ISA irqs (scanned) = 3,4,7,9
> polling interval = 1000 ms
> Jul 17 09:42:16 bretdell_linux pcmcia:  cardmgr.
> Jul 17 09:42:16 bretdell_linux rc: Starting pcmcia succeeded
> Jul 17 09:42:16 bretdell_linux cardmgr[432]: starting, version is 3.1.8
> Jul 17 09:42:16 bretdell_linux inet: inetd startup succeeded
> Jul 17 09:42:16 bretdell_linux cardmgr[432]: watching 2 sockets
> Jul 17 09:42:17 bretdell_linux kernel: cs: IO port probe 0x1000-0x17ff:
> clean.
> Jul 17 09:42:17 bretdell_linux kernel: cs: IO port probe 0x0100-0x04ff:
> excluding 0x220-0x22f 0x320-0x327 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
> # skip
> .
> .
> .
> Jul 17 09:42:18 bretdell_linux cardmgr[432]: initializing socket 0
> Jul 17 09:42:18 bretdell_linux cardmgr[432]: socket 0: Linksys EtherFast
> LANmodem 56K
> #skip
> .
> .
> .
> Jul 17 09:42:18 bretdell_linux cardmgr[432]: executing: 'insmod
> /lib/modules/2.2.14-5.0/pcmcia/pcnet_cs.o'
> Jul 17 09:42:18 bretdell_linux cardmgr[432]: executing: 'insmod
> /lib/modules/2.2.14-5.0/pcmcia/serial_cs.o'
> Jul 17 09:42:18 bretdell_linux kernel: eth0: NE2000 Compatible: io 0x300,
> irq 3, hw_addr 00:E0:98:06:87:D1
> Jul 17 09:42:18 bretdell_linux kernel: tty01 at 0x02f8 (irq = 3) is a
> 16550A
> Jul 17 09:42:18 bretdell_linux cardmgr[432]: executing: './network start
> eth0'
> 
> #skip
> .
> .
> .
> Jul 17 09:42:20 bretdell_linux kernel: eth0: found link beat
> #skip
> .
> .
> .
> Jul 17 09:42:20 bretdell_linux cardmgr[432]: + Determining IP information
> for eth0... done.  #using dhcp, I don't think you will see this otherwise
> 
> #skip
> .
> .
> .
> 
> Jul 17 09:42:20 bretdell_linux cardmgr[432]: executing: './serial start
> ttyS1'
> #skip
> .
> .
> .
> 
> Jul 17 09:42:21 bretdell_linux kernel: eth0: found link beat
> 
> Hope this helps let me know.  One thing I have noticed is that the order
> of execution of the init.d scripts tries to bring up the ethernet before
> the pcmcia services are started but since it makes it later I have but
> dinked with the symlinks in the rc*.d directories to try and correct it.
> 
> Bret
> 
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.


-- 
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.

Reply via email to