On Mon, 3 Jul 2000, Steven Pierce spewed into the bitstream:
SP>
SP>
SP>Anurag,
SP>
SP>Does it support it?? Some of the Compaq do and some do not. You need to look in
the
SP>manual for that information, or call Compaq. You need to find out if it will
support it first.
SP>
SP>S
SP>
SP>*********** REPLY SEPARATOR ***********
SP>
SP>On 7/3/2000 at 11:30 AM Anurag Jalan wrote:
SP>
SP>>This particular box is a Compaq Proliant P-III , 128 Mb ram, 2 SCSI HDs ....
SP>>
SP>>anurag
SP>>
SP>>---
SP>>At 09:28 PM 7/2/00 -0700, you wrote:
SP>>>
SP>>>First thing you need to find out is if the BOX will support Raid. Not all
SP>>machines will support
SP>>>it without a card installed.
SP>>>
SP>>>S
SP>>>
SP>>>*********** REPLY SEPARATOR ***********
SP>>>
SP>>>On 6/30/2000 at 8:54 AM Anurag Jalan wrote:
SP>>>
SP>>>>Hi all ,
SP>>>>
SP>>>>I have 2 identical SCSI 9 GB hard drives on my main Linux box.
SP>>>>There are 4 primary partitions on /dev/sda .. / , /boot , /home and swap.
SP>>>>/dev/sdb is unused, unformatted ...
SP>>>>
SP>>>>How can I set up a RAID 1 mirroring system, without disrupting my setup ? I
SP>>>>just need to get some pointers to get started ...
If you're running a stock RH kernel it should be no problem. The documentation
is already on your system!
[csm@warbird csm]$ cd /usr/doc/raidtools-0.90/
[csm@warbird raidtools-0.90]$ ls
COPYING Software-RAID.HOWTO.txt raid1.conf.sample raid5.conf.sample
README raid0.conf.sample raid4.conf.sample raidtab.sample
--
Chuck Mead, CTO, LinuxMall.com
[EMAIL PROTECTED]
GnuPG Public Key Available: http://pgp.ai.mit.edu/
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
