Hi,
I just got a new va linux system and successfully configured cdrecord to
write cds. I am using this to back up data in my home directory. The last
two cd's I've tried to create with cdrecord have produced an error message
I do not understand. Can someone help explain what is going on and what I
can do to correct it? It's listed toward the bottom below and is a i/o
scsi error (i have a scsi sony 10/4/32 cdrw drive). Any help much
appreciated.
[root@va /root]# /usr/bin/cdrecord -v speed=2 dev=0,6,0
/u1/tmpcd/cdimage.raw
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 4
Response Format: 2
Capabilities : SYNC
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX145S '
Revision : '1.0b'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 4183808 = 4085 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 490 MB
Total size: 563 MB (55:48.77) = 251158 sectors
Lout start: 563 MB (55:50/58) = 251158 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: 3
ATIP start of lead in: -11323 (97:31/02)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 85067
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 490 of 490 MB written (fifo 100%).
Track 01: Total bytes read/written: 514367488/514367488 (251156 sectors).
/usr/bin/cdrecord: Input/output error. flush cache: scsi
sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 12 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset
occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 14.175s timeout 120s
Trouble flushing the cache
Writing time: 1680.685s
Fixating...
/usr/bin/cdrecord: Input/output error. close track/session: scsi
sendcmd: retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.026s timeout 480s
Fixating time: 10.697s
/usr/bin/cdrecord: fifo had 15698 puts and 15698 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 15465 times full, min fill
was 95%.
[root@va /root]#
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
