On Tue, 13 Jun 2000, Eric Clover wrote:
> hello, i have an external 50pin scsi Syquest 1.5gig Syjet, it is on its
> own isa advansys scsi card. the card is one of two scsi cards on the
> box. the other scsi card is an adaptec 68pin with 2 5gig hd's. the
> adaptec 68pin scsi card (which i will call sg0) works fine. the other
> scsi card (the isa 50pin advansys scsi card, which i will call sg1)
> works from what i can tell from the scsi card bios upon bootup. with all
> that said, how can i scan the bus to see if the sg1 is working and that
> the syjet is operational? sg1 does not show up in /proc/interrupts.
> might i have to somehow add a module somewhere before it works?? if so,
> how/what do i have to do? do isa cards need both irq's and dma's? and is
> there a way to scan to see if sg1 is working?? i used cdrecord -scanbus
> but it will only scan scsi0.
> help please
>
As root type "modprobe <modulename>" I'm not sure what
module you'll use, but it'll be an Advansys driver module.
That *should* do it.
John
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
