hello, i have an external 50pin scsi Syquest 1.5gig Syjet, it is on its
own isa advansys scsi card. the card is one of two scsi cards on the
box. the other scsi card is an adaptec 68pin with 2 5gig hd's. the
adaptec 68pin scsi card (which i will call sg0) works fine. the other
scsi card (the isa 50pin advansys scsi card, which i will call sg1)
works from what i can tell from the scsi card bios upon bootup. with all
that said, how can i scan the bus to see if the sg1 is working and that
the syjet is operational? sg1 does not show up in /proc/interrupts.
might i have to somehow add a module somewhere before it works?? if so,
how/what do i have to do? do isa cards need both irq's and dma's? and is
there a way to scan to see if sg1 is working?? i used cdrecord -scanbus
but it will only scan scsi0.
help please
thank you
eric
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
