Hi Greg,
>Set the card as an NE2000 compatible..... I have a realtek chip card, but
>manufacturers would be different for the actual cards I guess........make
>sure its not in pnp mode by setting it with the software to be on a known
>IRQ
I changed the card to NE2k-pci with linuxconf (can't set the card itself, if
that's what you meant), and found out that my BIOS assigns irq 10 to the
first PCI slot (my networkcard). So I filled in the Irq (opt) setting in
linuxconf, but after rebooting I got:
insmod: /lib/modules/2.2.5-15/net/ne2k-pci.o: invalid parameter irq
What's wrong?
Regards,
Pieter
>*********** REPLY SEPARATOR ***********
>
>On 6/02/00 at 15:34 serkoon wrote:
>I try to run RH6.0 with a realtek8139 network card, and of course
>networksupport for this card.. But when I try to boot Linux (even after the
>first install) many services [FAILED] to start, sometimes RH can't even set
>my clock!
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
