hi,
Everytime during the boot, I get the foll. messages:
eth0: Digital DS21142/3 Tulip at 0x7000, 00 60 67 36 42 52, IRQ 10.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2)
block.
eth0: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY
(2) block.
eth0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4)
block.
eth0: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY
(4) block.
eth0: 21140 transmit timed out, status f0260000, SIA 000000c6 ffff0000
fffbff7f 8ff40008, resetting...
eth0: transmit timed out, switching to 100baseTx media.
eth0: 21142 10mpbs sensed media.
eth0: 21140 transmit timed out, status f0260400, SIA 000000c6 ffff0000
fffbffff 8ff00008, resetting...
eth0: transmit timed out, switching to 10baseT media.
grep uses obsolete /proc/pci interface
Also immediately after boot, I cannot ping any remote machines. I will
first have to ping localhost and only then can I ping remote host.
What might be the problem?
Thanks in advance,
Raju
PGP signature
