Hello!
Sorry if this is offtopic, but the manual that comes with the modem
is written for Windows users (no commands list, switches description,
etc. - good for nothing.)
The problem is, when I try to use it, I consistently get ftp/hhtp
download rates about 200 B/s. So I swear at my provider and
sites on the routes, then plug in my old 28.8 internal, and get
about 3 KB/s... (not once, so it does not seem to be a coincidence). I
can communicate with the USR modem through minicom, and there are no
visible delays, so it does not appear to be an IRQ/setserial/...
problem).
Anyone has experience with this modem? An init string trick? PNP?
Or is it no good for Linux at all? (Well, perhaps my provider does not
support X2/ITU56K, but could this be a reason to work so much slower
than the old 28.8?)
The model number of the modem is 215686-03. The system is RedHat 6.1,
kernel 2.2.13, the modem connects to ttyS1 on Soyo SY-5EMA+ v.1.0
motherboard, the init string currently used is "AT\&F1S0=0X4\&c1E1Q0"
(what else could be relevant?).
Any help/pointers to FM appreciated.
Best regards,
Oleg
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
