> >I'm having some serious hard disk problems and I was hoping
> someone could help.
[...]
> What I did to fix it was the following. I adjusted my scsi card
> parameters to drop the scsi bus speed right down to the lowest
> setting. Once I verified it worked, I then worked upwards to find
> the fastest but reliable speed. I've done this on Adaptec and WD
> cards.
Thanks Tony.
The problem was that the sync rate was set to 40 rather than 20. I've adjusted
this and all appears to be well.
> The problem didn't show up on cdrom installation, but only on
> disk-disk copies.
Possibly this is the only time the controller tried to use maximum bandwidth.
--
Eze Ogwuma
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
