> > > does anybody out there happen to have BRU working with the HP Colorado
> > > T3000? I just picked one up and really hope it isn't known to be
> > > incompatible. It says it complies with QIC-3020 Wide which ftape is
> > > supposed to work with.
> Are you guys sure the machine your putting it in can handle 1Mb/sec on the
> floppy controller? I'm pretty sure a 486 would have a hard time with
> that..
I just thought of something that maybe I should bring up... The controller
in this 486 is an ISA card. I don't know what the specs are on ISA but if
any card can't support 1Mb/s floppy it is probably an ISA. I just found a
VESA card I could put in there (I didn't think of it before because I had
other systems to try it in). Do you know if a VESA card should support
1Mb/s throughput on the floppy controller or does that vary from card to
card?
I actually have two VESA cards. one is a Vision QD6500 and the other some
no name brand. They both seem to have the same chips which likely have
something to do with the controller on them though. a UMC UM82C863F and a
UMC UM82C865F . I have no sheets on these cards so I have no idea what the
specs are. luckily they have the jumper settings printed on the back. Can
you or anyone verify these cards should give the needed 1Mb/s ?
thanks for any suggestions,
rob
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
