Hi Jacques, > Barry, wasn't supposed to be a second hole in the 8-16 MC cam thru which the > index mark for the 16-32 MC one can be seen ?
I don't know if there was "supposed to be" an extra hole, but there's not one in mine. I haven't loosened any camshaft clamps so if it was in alignment before, then it should still be in alignment now. I mostly just wanted to check it. > The 8-16 MC cam should be aligned first ! > As far as I remember, there is no clamp that can be loosen on the 8-16 MC > cam shaft to adjust the cam position. > It should be aligned by rotation of the KC knob, then the proper 000 KC > reading of the counter can be adjusted and then all the other cam positions > in the order specified in the chapter 73 of the TM11-5820-357-35. > Be sure to apply the procedure of the chapter 73 (page 88) from the very > beginning ! Yes, the steps are certainly to be followed to the letter. While I don't think it's particularly difficult to get things back in alignment (speaking entirely from just the perspective of the A model), I don't really want to "fix it" if it isn't "broken". > 73, Jacques, VE2JFE in Montreal Thanks again, Barry - N4BUQ > In the R-390, I notice that for the 16-32 MC CAM, when the others are in > alignment and the lines can be seen through the holes for those, the line > for this cam is hidden by the 8-16 MC CAM underneath it. I don't see how > that could be visible and presume it's normal but wondering how one is > supposed to align the 16-32 MC CAM properly. > > Thanks, > Barry - N4BUQ > > ______________________________________________________________ > R-390 mailing list > Home: http://mailman.qth.net/mailman/listinfo/r-390 > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ R-390 mailing list Home: http://mailman.qth.net/mailman/listinfo/r-390 Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
