Thanks a lot! I tried just as you mentioned. Now it's working! The problem was that I didnot use "UEFI" booting mode. Thanks again!
在2020年7月27日星期一 UTC+8 上午12:47:02<Ludovic Bellier> 写道： > [Note: sorry for not replying directly to the original thread, but I > wasn't yet registered to the mailing-list, so I can't do a reply with my > MUA] > > Original copy-paste mail from zhaojx88 (see : > https://groups.google.com/d/msg/qubes-users/vRKrs5ZIg9c/WUepmWP9BwAJ): > > > Thanks for the guidance! > > I also have nuc 10i7fnk. but I have problems installing qubes OS > 4.0. I hope I can get answers from you. > > I Set legecy mode, security booting off, use USB stick to install OS. > > The following warning maseges&error is displayed when booting. > > "WARN anaconda: > /usr/lib64/python3.5/site-packages/pyanaconda/pwpolicy.py:101:PendingDeprecationWarning: > > > add_option is deprecated and will be removed in > > > pykickstart-3. Use add_argument instead. > > op.add.option("--minlen",type="int") > > ...... > > WARN anaconda.stdout:Not asking for VNC because we don't have a network > > ...... > > WARN anaconda:X startup failed: Xorg exited with status 1 > > WARN anaconda.stdout:X startup failed,aborting installation > > ERR anaconda.stdout:X startup failed, aboting installation" > > > > Do I miss setting something in bios or do I need to install the OS > with DVD? > > Thanks a lot! > > zhaojx88, > > you got a *network error*, so may be, you should follow my steps > with a USB Network Interface Controller (aka USB ethernet), because the > internal ethernet card isn't recognized by the default 4.9 linux kernel. > > My BIOS setting: > > Boot (section) > > Secure Boot Disabled > > UEFI Boot Enabled > > Legacy Boot Enabled > > > Secure Boot (sub-section) > > System Mode User > > Secure Boot Disabled > > Not Active (title) > > Secure Boot Mode Standard > > > Boot Priority > > UEFI Boot x (i.e. checked) > > Legacy Boot x (i.e. checked) > > USB x (i.e. checked) > > I used the 4.0.3 ISO from https://www.qubes-os.org/downloads/ on a > USB storage stick. On boot I used the F10 key for choosing the *UEFI* > USB device stick. And I installed Qubes-OS on my SSD with the help of > the Qubes-OS documentation. > > Note also than my first 4GB USB stick was too small for the iso, > finally I used a 32GB stick (but 8GB will be fine). > > If this doesn't resolve your problem, give more information (BIOS > screenshots, when you got the above error message, ...) > > -- > > Ludovic > > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/5526756b-14b3-4f51-b9b8-bb18246f2e9cn%40googlegroups.com.
