[Note: sorry for not replying directly to the original thread, but I wasn't yet registered to the mailing-list, so I can't do a reply with my MUA]

Original copy-paste mail from zhaojx88  (see : https://groups.google.com/d/msg/qubes-users/vRKrs5ZIg9c/WUepmWP9BwAJ):

> Thanks for the guidance!
> I also have nuc 10i7fnk. but I have problems installing qubes OS 4.0.  I hope I can get answers from you.
> I Set legecy mode, security booting off, use USB stick to install OS.
> The following warning maseges&error is displayed when booting.
> "WARN anaconda: /usr/lib64/python3.5/site-packages/pyanaconda/pwpolicy.py:101:PendingDeprecationWarning: add_option is deprecated and will be removed in

> pykickstart-3.  Use add_argument instead.
>    op.add.option("--minlen",type="int")
> ......
> WARN anaconda.stdout:Not asking for VNC because we don't have a network
> ......
> WARN anaconda:X startup failed: Xorg exited with status 1
> WARN anaconda.stdout:X startup failed,aborting installation
> ERR anaconda.stdout:X startup failed, aboting installation"
>
> Do I miss setting something in bios or do I need to install the OS with DVD?
> Thanks a lot!

zhaojx88,

    you got a *network error*, so may be, you should follow my steps with a USB Network Interface Controller (aka USB ethernet), because the internal ethernet card isn't recognized by the default 4.9 linux kernel.

    My BIOS setting:

Boot (section)

  Secure Boot        Disabled

  UEFI Boot            Enabled

  Legacy Boot        Enabled

  > Secure Boot (sub-section)

    System Mode    User

    Secure Boot      Disabled

    Not Active (title)

    Secure Boot Mode   Standard

  > Boot Priority

    UEFI Boot       x (i.e. checked)

    Legacy Boot   x (i.e. checked)

    USB                x (i.e. checked)

    I used the 4.0.3 ISO from https://www.qubes-os.org/downloads/  on a USB storage stick. On boot I used the F10 key for choosing the *UEFI* USB device stick. And I installed Qubes-OS on my SSD with the help of the Qubes-OS documentation.

    Note also than my first 4GB USB stick was too small for the iso, finally I used a 32GB stick (but 8GB will be fine).

    If this doesn't resolve your problem, give more information (BIOS screenshots, when you got the above error message, ...)

--

Ludovic

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4eba41fd-046c-2e2e-2222-948775933c75%40zyrianes.net.

Reply via email to