On Mon, 21 Jan 2019 21:32:55 -0200 Martin Pieuchot <m...@openbsd.org> wrote:
> On 21/01/19(Mon) 09:36, Ed Ahlsen-Girard wrote: > > After this command sequence while a Galaxy S8 running > > R16NW.G950USQU5CSA4 is plugged in: > > Does it also happen when you unplug your phone w/o using mtp-connect? No, the phone unplugs with no effect. > > How does your phone appear in the dmesg? umodem0 at uhub4 port 4 configuration 2 interface 1 "SAMSUNG SAMSUNG_Android" rev 2.10/4.00 addr 6 umodem0: data interface 2, has no CM over data, has no break umodem0: status change notification available ucom0 at umodem0 ugen1 at uhub4 port 4 configuration 2 "SAMSUNG SAMSUNG_Android" rev 2.10/4.00 addr 6 > > Do you see any 'detach' message before the panic? Could you include > them in your report? I don't recall seeing one, but I'll look for it. > > > > > doas mtp-connect > > doas simple-mtpfs /mnt > > > > I eventually end up here: > > > > login: panic: free: size too small 16 <= 64 / 2 > > (0xffff800000da7ac0) type USB Stopped at db_enter+0x12: > > popq %r11 TID PID UID PRFLAGS PFLAGS CPU > > COMMAND 154398 12758 35 0x12 0 1 Xorg > > *409957 13277 0 0x14000 0x200 0K usbtask > > db_enter() at db_enter+0x12 > > panic() at panic+0x120 > > free(cc5dea5c80df9709,ffff800000e2c000,ffff800000dfbe00) at > > free+0x3cf usbd_free_device(0) at usb_free_device+0xf6 > > usbd_detach(268907f288667fb8,ffff800000904500) at usbd_detach+0x81 > > uhub_port_connect(b1a3e43ba98bd4a1,ffff800000904500,19,6) at > > uhub_port_connect+0x66 uhub_explore(280398b005991987) at > > uhub_explore+0x208 uhub_explore(280398b00585e61e) at > > uhub_explore+0x24e usb_explore(89e789df119a3f2) at usb_explore+0x87 > > usb_task_thread(0) at usb_task_thread+0x100 > > end trace frame: 0x0, count: 5 > > > > Sometimes I have useful connectivity for a while, possibly > > associated with the state of the snapshot being run. I did not have > > that today. Eventually, though, it always ends with something > > like this. The keyboard is unresponsive at this point, so I have > > run no debugger commands. dmesg below signature. > > > > > > My dmesg: > > > > > > -- > > > > Edward Ahlsen-Girard > > Ft Walton Beach, FL > > > > > > OpenBSD 6.4-current (GENERIC.MP) #623: Fri Jan 18 22:57:22 MST 2019 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 4176125952 (3982MB) > > avail mem = 4039950336 (3852MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries) > > bios0: vendor AMI version "80.06" date 04/01/2015 > > bios0: Hewlett-Packard 550-036 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT > > SSDT DBGP acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) > > PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) > > PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) [...] acpitimer0 at > > acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: > > PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: > > Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.98 MHz, 06-3c-03 cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1 > > cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 8 pa > > 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (RP01) > > acpiprt2 at acpi0: bus 2 (RP04) > > acpiprt3 at acpi0: bus 3 (RP06) > > acpiprt4 at acpi0: bus 4 (RP07) > > acpiprt5 at acpi0: bus -1 (PEG0) > > acpiec0 at acpi0: not present > > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: FN00, resource for FAN0 > > acpipwrres1 at acpi0: FN01, resource for FAN1 > > acpipwrres2 at acpi0: FN02, resource for FAN2 > > acpipwrres3 at acpi0: FN03, resource for FAN3 > > acpipwrres4 at acpi0: FN04, resource for FAN4 > > acpitz0 at acpi0: critical temperature is 105 degC > > acpitz1 at acpi0: critical temperature is 105 degC > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibtn0 at acpi0: PWRB > > "PNP0C14" at acpi0 not configured > > "PNP0C0B" at acpi0 not configured > > "PNP0C0B" at acpi0 not configured > > "PNP0C0B" at acpi0 not configured > > "PNP0C0B" at acpi0 not configured > > "PNP0C0B" at acpi0 not configured > > acpivideo0 at acpi0: GFX0 > > cpu0: Enhanced SpeedStep 3691 MHz: speeds: 3700, 3500, 3300, 3100, > > 2900, 2700, 2500, 2300, 2200, 2000, 1800, 1600, 1400, 1200, 1000, > > 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 > > "Intel Core 4G Host" rev 0x06 inteldrm0 at pci0 dev 2 function 0 > > "Intel HD Graphics 4600" rev 0x06 drm0 at inteldrm0 > > inteldrm0: msi > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: > > msi azalia0: No codecs found > > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, > > xHCI 1.0 usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 > > function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 8 > > Series USB" rev 0x05: apic 8 int 16 usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 8 Series > > HD Audio" rev 0x05: msi azalia1: codecs: Realtek ALC662 > > audio0 at azalia1 > > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > > pci1 at ppb0 bus 1 > > ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi > > pci2 at ppb1 bus 2 > > xhci1 at pci2 dev 0 function 0 vendor "Fresco Logic", unknown > > product 0x1100 rev 0x01: msi, xHCI 1.0 usb2 at xhci1: USB revision > > 3.0 uhub2 at usb2 configuration 1 interface 0 "Fresco Logic xHCI > > root hub" rev 3.00/1.00 addr 1 ppb2 at pci0 dev 28 function 5 > > "Intel 8 Series PCIE" rev 0xd5: msi pci3 at ppb2 bus 3 > > vendor "Broadcom", unknown product 0x4365 (class network subclass > > miscellaneous, rev 0x01) at pci3 dev 0 function 0 not configured > > ppb3 at pci0 dev 28 function 6 "Intel 8 Series PCIE" rev 0xd5: msi > > pci4 at ppb3 bus 4 re0 at pci4 dev 0 function 0 "Realtek 8168" rev > > 0x0c: RTL8168G/8111G (0x4c00), msi, address 7c:05:07:94:21:e2 > > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 ehci1 at pci0 dev 29 > > function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23 usb3 at > > ehci1: USB revision 2.0 uhub3 at usb3 configuration 1 interface 0 > > "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 > > function 0 "Intel H87 LPC" rev 0x05 ahci0 at pci0 dev 31 function 2 > > "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s > > ahci0: port 1: 6.0Gb/s > > ahci0: port 2: 1.5Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, SPCC Solid State, SAFM> SCSI3 > > 0/direct fixed t10.ATA_SPCC_Solid_State_Disk_65B3076B02AD00000823 > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin sd1 at > > scsibus1 targ 1 lun 0: <ATA, TOSHIBA DT01ACA1, MS2O> SCSI3 0/direct > > fixed naa.5000039fe1cc5479 sd1: 953869MB, 512 bytes/sector, > > 1953525168 sectors cd0 at scsibus1 targ 2 lun 0: <hp, CDDVDW > > SU-208GB, HN00> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 > > function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int 18 iic0 at > > ichiic0 spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 isa0 at > > pcib0 isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate > > Matching Hub" rev 2.00/0.05 addr 2 uhidev0 at uhub4 port 1 > > configuration 1 interface 0 "CPS UPS CP1000AVRLCD" rev 1.10/0.01 > > addr 3 uhidev0: iclass 3/0, 24 report ids upd0 at uhidev0 > > umass0 at uhub4 port 3 configuration 1 interface 0 "Generic > > USB2.0-CRW" rev 2.00/57.13 addr 4 umass0: using SCSI over Bulk-Only > > scsibus2 at umass0: 2 targets, initiator 0 > > sd2 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC/MS PRO, 1.00> SCSI2 > > 0/direct removable serial.0bda0153926571200000 ugen0 at uhub4 port 5 > > "Broadcom Corp BCM43142A0" rev 2.00/1.12 addr 5 uhub5 at uhub2 port > > 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev > > 2.10/90.90 addr 2 umass1 at uhub2 port 5 configuration 1 interface > > 0 "asmedia ASMT1153e" rev 3.00/1.00 addr 3 umass1: using SCSI over > > Bulk-Only scsibus3 at umass1: 2 targets, initiator 0 sd3 at > > scsibus3 targ 1 lun 0: <ASMT, 2115, 0> SCSI4 0/direct removable > > serial.174c55aa123456789144 uhub6 at uhub2 port 7 configuration 1 > > interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.00/90.91 addr 4 uhub7 > > at uhub3 port 1 configuration 1 interface 0 "Intel Rate Matching > > Hub" rev 2.00/0.05 addr 2 uhidev1 at uhub7 port 3 configuration 1 > > interface 0 "KYE Optica? Mouse" rev 1.10/1.01 addr 3 uhidev1: > > iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 > > uhidev2 at uhub7 port 4 configuration 1 interface 0 "Dell Dell USB > > Keyboard" rev 1.10/3.52 addr 4 uhidev2: iclass 3/1 ukbd0 at > > uhidev2: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > vscsi0 at root > > scsibus4 at vscsi0: 256 targets > > softraid0 at root > > scsibus5 at softraid0: 256 targets > > root on sd0a (a0b09f1218821720.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > -- Edward Ahlsen-Girard Ft Walton Beach, FL
