On Fri, Jun 08, 2018 at 11:38:49AM +0000, tfrohw...@fastmail.com wrote:
> I think the blockchain size is a deterrent. I can test it when I'm back from
> traveling in ~ 10 days and have access to additional GB on my external drive,
> in case that helps.
>
> On June 8, 2018 6:53:55 AM UTC, Rafael Sadowski <raf...@sizeofvoid.org> wrote:
> >3rd ping, or 4rd? Could anyone sacrifice themselves, please.
> >
> >It's not evil! It's NOT mining. ;)
I installed it and tried to sync the 200GB blockchain to my external HDD
(because that's the only one that got this much space available). It
synced fine for 1-2 days with the bitcoin-qt client, but then at about
30-40% of the blockchain synced, it now starts throwing an error:
ERROR: ReadBlockFromDisk: Deserialize or I/O error - CAutoFile::read:fread
failed: unspecified iostream_category error at CBlockDiskPos(nFile=613,
nPos=6513581)
When this happens, the following lines appear in dmesg:
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
ASC/ASCQ: Unrecovered Read Error
Fortunately, the drive still seems to be functional otherwise, can be
mounted and fsck -f doesn't see any issues. The dmesg lines reappear
whenever mounting or unmounting said drive until I disconnect and
reconnect the drive from the USB port.
I can't resume syncing the blockchain though because the error appears
again.
Not sure if this is a deficiency of the port or maybe the hard drive
itself...
bitcoin's debug.log (9.5M): https://thfr.info/tmpstor/debug.log
OpenBSD 6.3-current (GENERIC.MP) #36: Wed Jun 20 00:03:07 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 7454228480 (7108MB)
avail mem = 7157866496 (6826MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x3f262000 (86 entries)
bios0: vendor American Megatrends Inc. version "1.A0" date 02/27/2018
bios0: MSI MS-7A74
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT HPET SSDT SSDT UEFI
SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 WSMT
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4)
PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz, 3892.39 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz, 3890.94 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus 2 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: FN00, resource for FAN0
acpipwrres24 at acpi0: FN01, resource for FAN1
acpipwrres25 at acpi0: FN02, resource for FAN2
acpipwrres26 at acpi0: FN03, resource for FAN3
acpipwrres27 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpicmos0 at acpi0
"INT3F0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"INT340E" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3892 MHz: speeds: 3900, 3700, 3500, 3300, 3100, 2900,
2700, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x590f rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x67b1 rev
0x80
drm1 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaac8 rev 0x00:
msi
azalia0: no supported codecs
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 630" rev 0x04
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI
1.3.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS72321, EC1Z> SCSI3 0/direct
fixed naa.5000cca61ac0734c
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WDS500G2B0B-, X611> SCSI3 0/direct
fixed naa.5001b448b6be5535
sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
sd2 at scsibus1 targ 5 lun 0: <ATA, Hitachi HUA72202, JKAO> SCSI3 0/direct
fixed naa.5000cca222d7946d
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
ppb1 at pci0 dev 28 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address 30:9c:23:9c:f7:40
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia1 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia1: codecs: Realtek/0x0887, Intel/0x280b, using Realtek/0x0887
audio0 at azalia1
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int
16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/31.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev2: iclass 3/0, 7 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
ukbd1 at uhidev2 reportid 5: 112 variable keys, 0 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhid2 at uhidev2 reportid 6: input=2, output=0, feature=0
uhid3 at uhidev2 reportid 7: input=0, output=0, feature=7
uhidev3 at uhub0 port 4 configuration 1 interface 2 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev3: iclass 3/0
uhid4 at uhidev3: input=8, output=8, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd3: 254538MB, 512 bytes/sector, 521295344 sectors
root on sd3a (48181a026c4a6623.a) swap on sd3b dump on sd3b
initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x148C:0x2358).
error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
(scratch(0x3010C)=0xCAFEDEAD)
radeondrm0: 1024x768, 32bpp
wsdisplay1 at radeondrm0
wsdisplay1: screen 0-5 added (std, vt100 emulation)
lock order reversal:
1st 0xffffffff81df5a20 &sched_lock (&sched_lock) @
/usr/src/sys/kern/kern_synch.c:444
2nd 0xffff80000028f270 &dev_priv->irq_lock (&dev_priv->irq_lock) @
/usr/src/sys/dev/pci/drm/i915/intel_lrc.c:1645
lock order "&dev_priv->irq_lock"(mutex) -> "&sched_lock"(sched_lock) first seen
at:
#0 witness_checkorder+0x4c0
#1 ___mp_lock+0x70
#2 wakeup_n+0x39
#3 task_add+0x93
#4 gen6_rps_boost+0x129
#5 __i915_wait_request+0x155
#6 i915_wait_request+0x97
#7 i915_gem_object_wait_rendering+0x19c
#8 i915_gem_object_sync+0x6c
#9 i915_gem_object_pin_to_display_plane+0x2e
#10 intel_pin_and_fence_fb_obj+0x1cd
#11 intel_prepare_plane_fb+0xb4
#12 drm_atomic_helper_prepare_planes+0x6b
#13 intel_atomic_commit+0x52
#14 drm_atomic_helper_set_config+0x80
#15 drm_mode_setcrtc+0x36f
#16 drm_do_ioctl+0x221
#17 drmioctl+0xf9
#18 VOP_IOCTL+0x5a
lock order "&sched_lock"(sched_lock) -> "&dev_priv->irq_lock"(mutex) first seen
at:
#0 witness_checkorder+0x4c0
#1 _mtx_enter+0x31
#2 gen8_logical_ring_put_irq+0x36
#3 __i915_wait_request+0x367
#4 intel_mmio_flip_work_func+0x3e
#5 taskq_thread+0x6d
chrome[97379]: pledge "rpath", syscall 5
error: [drm:pid28539:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
error: [drm:pid52906:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
umass0 at uhub0 port 17 configuration 1 interface 0 "Western Digital My Book
1230" rev 3.00/10.65 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd4 at scsibus4 targ 1 lun 0: <WD, My Book 1230, 1065> SCSI4 0/direct fixed
sd4: 2861556MB, 4096 bytes/sector, 732558336 sectors
ses0 at scsibus4 targ 1 lun 1: <WD, SES Device, 1065> SCSI4 13/enclosure
services fixed
ses0: unable to read enclosure configuration
trap [higan]56862/240671 type 262: sp 1565e5d471a8 not inside
7f7fffbc1000-7f7ffffc1000
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Logitech Dual
Action" rev 2.00/4.14 addr 5
uhidev4: iclass 3/0
uhid5 at uhidev4: input=8, output=7, feature=0
uhid5 detached
uhidev4 detached
chrome[95449]: pledge "rpath", syscall 5
error: [drm:pid28539:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Logitech Dual
Action" rev 2.00/4.14 addr 5
uhidev4: iclass 3/0
uhid5 at uhidev4: input=8, output=7, feature=0
uhid5 detached
uhidev4 detached
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Gamepad F310" rev
2.00/40.14 addr 5
uhidev4: iclass 255/93
uhid5 at uhidev4: input=20, output=0, feature=0
uhid5 detached
uhidev4 detached
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Logitech Dual
Action" rev 2.00/4.14 addr 5
uhidev4: iclass 3/0
uhid5 at uhidev4: input=8, output=7, feature=0
uhid5 detached
uhidev4 detached
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Gamepad F310" rev
2.00/40.14 addr 5
uhidev4: iclass 255/93
uhid5 at uhidev4: input=20, output=0, feature=0
uhid5 detached
uhidev4 detached
error: [drm:pid28539:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Gamepad F310" rev
2.00/40.14 addr 5
uhidev4: iclass 255/93
uhid5 at uhidev4: input=20, output=0, feature=0
uhid5 detached
uhidev4 detached
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Logitech Dual
Action" rev 2.00/4.14 addr 5
uhidev4: iclass 3/0
uhid5 at uhidev4: input=8, output=7, feature=0
uhid5 detached
uhidev4 detached
uhidev4 at uhub0 port 5 configuration 1 interface 0 "Logitech Logitech Dual
Action" rev 2.00/4.14 addr 5
uhidev4: iclass 3/0
uhid5 at uhidev4: input=8, output=7, feature=0
WARNING visible failed at /usr/src/sys/dev/pci/drm/i915/intel_display.c:11735
WARNING was_visible failed at
/usr/src/sys/dev/pci/drm/i915/intel_display.c:11732
WARNING visible failed at /usr/src/sys/dev/pci/drm/i915/intel_display.c:11735
WARNING was_visible failed at
/usr/src/sys/dev/pci/drm/i915/intel_display.c:11732
WARNING visible failed at /usr/src/sys/dev/pci/drm/i915/intel_display.c:11735
WARNING was_visible failed at
/usr/src/sys/dev/pci/drm/i915/intel_display.c:11732
WARNING visible failed at /usr/src/sys/dev/pci/drm/i915/intel_display.c:11735
WARNING was_visible failed at
/usr/src/sys/dev/pci/drm/i915/intel_display.c:11732
error: [drm:pid28539:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
uhid5 detached
uhidev4 detached
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
ASC/ASCQ: Unrecovered Read Error
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
ASC/ASCQ: Unrecovered Read Error
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
syncing disks... done
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
reboo
OpenBSD 6.3-current (GENERIC.MP) #36: Wed Jun 20 00:03:07 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 7454228480 (7108MB)
avail mem = 7157874688 (6826MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x3f262000 (86 entries)
bios0: vendor American Megatrends Inc. version "1.A0" date 02/27/2018
bios0: MSI MS-7A74
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT HPET SSDT SSDT UEFI
SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 WSMT
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4)
PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz, 3892.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz, 3890.94 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus 2 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: FN00, resource for FAN0
acpipwrres24 at acpi0: FN01, resource for FAN1
acpipwrres25 at acpi0: FN02, resource for FAN2
acpipwrres26 at acpi0: FN03, resource for FAN3
acpipwrres27 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpicmos0 at acpi0
"INT3F0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"INT340E" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3892 MHz: speeds: 3900, 3700, 3500, 3300, 3100, 2900,
2700, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x590f rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x67b1 rev
0x80
drm1 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaac8 rev 0x00:
msi
azalia0: no supported codecs
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 630" rev 0x04
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
"Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI
1.3.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS72321, EC1Z> SCSI3 0/direct
fixed naa.5000cca61ac0734c
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WDS500G2B0B-, X611> SCSI3 0/direct
fixed naa.5001b448b6be5535
sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
sd2 at scsibus1 targ 5 lun 0: <ATA, Hitachi HUA72202, JKAO> SCSI3 0/direct
fixed naa.5000cca222d7946d
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
ppb1 at pci0 dev 28 function 0 "Intel 200 Series PCIE" rev 0xf0: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address 30:9c:23:9c:f7:40
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel B250 LPC" rev 0x00
"Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
azalia1 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi
azalia1: codecs: Realtek/0x0887, Intel/0x280b, using Realtek/0x0887
audio0 at azalia1
ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int
16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/31.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev2: iclass 3/0, 7 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
ukbd1 at uhidev2 reportid 5: 112 variable keys, 0 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhid2 at uhidev2 reportid 6: input=2, output=0, feature=0
uhid3 at uhidev2 reportid 7: input=0, output=0, feature=7
uhidev3 at uhub0 port 4 configuration 1 interface 2 "Holtek USB Keyboard" rev
2.00/1.05 addr 3
uhidev3: iclass 3/0
uhid4 at uhidev3: input=8, output=8, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd3: 254538MB, 512 bytes/sector, 521295344 sectors
root on sd3a (48181a026c4a6623.a) swap on sd3b dump on sd3b
initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x148C:0x2358).
error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
(scratch(0x3010C)=0xCAFEDEAD)
radeondrm0: 1024x768, 32bpp
wsdisplay1 at radeondrm0
wsdisplay1: screen 0-5 added (std, vt100 emulation)
umass0 at uhub0 port 17 configuration 1 interface 0 "Western Digital My Book
1230" rev 3.00/10.65 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd4 at scsibus4 targ 1 lun 0: <WD, My Book 1230, 1065> SCSI4 0/direct fixed
sd4: 2861556MB, 4096 bytes/sector, 732558336 sectors
ses0 at scsibus4 targ 1 lun 1: <WD, SES Device, 1065> SCSI4 13/enclosure
services fixed
ses0: unable to read enclosure configuration
lock order reversal:
1st 0xffffffff81df7f00 &sched_lock (&sched_lock) @
/usr/src/sys/kern/kern_synch.c:444
2nd 0xffff80000028f270 &dev_priv->irq_lock (&dev_priv->irq_lock) @
/usr/src/sys/dev/pci/drm/i915/intel_lrc.c:1645
lock order "&dev_priv->irq_lock"(mutex) -> "&sched_lock"(sched_lock) first seen
at:
#0 witness_checkorder+0x4c0
#1 ___mp_lock+0x70
#2 wakeup_n+0x39
#3 task_add+0x93
#4 gen6_rps_boost+0x129
#5 __i915_wait_request+0x155
#6 i915_gem_object_wait_rendering__nonblocking+0x1d6
#7 i915_gem_set_domain_ioctl+0xdb
#8 drm_do_ioctl+0x221
#9 drmioctl+0xf9
#10 VOP_IOCTL+0x5a
#11 vn_ioctl+0x6b
#12 sys_ioctl+0x457
#13 syscall+0x32a
#14 Xsyscall_untramp+0xe4
lock order "&sched_lock"(sched_lock) -> "&dev_priv->irq_lock"(mutex) first seen
at:
#0 witness_checkorder+0x4c0
#1 _mtx_enter+0x31
#2 gen8_logical_ring_put_irq+0x36
#3 __i915_wait_request+0x367
#4 intel_mmio_flip_work_func+0x3e
#5 taskq_thread+0x6d
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
ASC/ASCQ: Unrecovered Read Error
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4(umass0:1:0): Check Condition (error 0x70) on opcode 0x35
SENSE KEY: Hardware Error
ASC/ASCQ: Internal Target Failure
sd4 detached
ses0 detached
scsibus4 detached
umass0 detached
umass0 at uhub0 port 17 configuration 1 interface 0 "Western Digital My Book
1230" rev 3.00/10.65 addr 4
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd4 at scsibus4 targ 1 lun 0: <WD, My Book 1230, 1065> SCSI4 0/direct fixed
sd4: 2861556MB, 4096 bytes/sector, 732558336 sectors
ses0 at scsibus4 targ 1 lun 1: <WD, SES Device, 1065> SCSI4 13/enclosure
services fixed
ses0: unable to read enclosure configuration
