Dear All,
Finally, I got a hand on an inexpensive P4 which will be used only for
the testing of new packages.
I also got my wife for the Valentine's day a new HP photosmart C5250
since she loves doing digital photographies and playing with the Gimp
and the Gphoto.
The printer in questions is fully supported since HPLIP 2.7.9 so I
decided to try to unlock its full functionality.
Ok to make long story short. CUPS builds without any troubles on the
snapshot from February 11. The same goes for SANE-backhands. HPLIP fails
to compile. I attached the message. Could you give me some hint to what
I am doing wrong.
I attached also dmesg.
I have two other scanner that I will use to test new SANE backhands. One
is Epson perfection 1670 which requires firmware and another is Epson
perfection 1260 for which I believe I need to disable uscanner driver as
the OpenBSD doesn't support getting USB vendor and product ID.
The scanner 1670 is fully functional on 4.2 Release and SANE-backhands
1.17. The Epson perfection 1260 was working on FreeBSD but I didn't want
to mess up my kernel on OpenBSD machines to test it. Now I have a
computer for testing and I will report on this scanner.
Kind Regards to Everyone,
P. S. I have ordered new DVD-RW from the NewEgg which I expect to
receive today or Monday. I will use it for
testing of K3b.
On the unrelated note I noticed that since OpenBSD switched to XOrg
7.2 from 6.9
I am experiencing the following problem. When
I kill X with the alt+ctrl+backspace I get just a blank screen
instead of working console. alt+ctrl+F2 does not give me working console
either. If I type halt -p computer shuts down properly. I attached the
row xorg.conf file for this machine.
The default dept and refreshing rates are missing but even editing those
do not make any difference. I tried to use different monitor. The same.
This is happening only with the machines with ATI video chip-sets.
Machine having the Intel video chip-set do not have this problem. Any
clue what I am doing wrong. I was booting machines with the default
options and generic kernel.
===> Cleaning for python-2.5.1p7
rm -f /usr/ports/packages/i386/all/python-2.5.1p7.tgz
/usr/ports/packages/i386/ftp/python-2.5.1p7.tgz
/usr/ports/packages/i386/cdrom/python-2.5.1p7.tgz
*** Error code 1
Stop in /usr/ports/lang/python/2.5 (line 1392 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/lang/python/2.5 (line 1890 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/lang/python/2.5 (line 1422 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/print/hplip (line 1550 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/print/hplip (line 1921 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/print/hplip (line 1392 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/print/hplip (line 1890 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/print/hplip (line 1422 of
/usr/ports/infrastructure/mk/bsd.port.mk).
# dmesg
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 535883776 (511MB)
avail mem = 510525440 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/01/02, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xf0450 (61 entries)
bios0: vendor Dell Computer Corporation version "A03" date 03/01/2002
bios0: Dell Computer Corporation OptiPlex GX240
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba20/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage 128 Pro TF" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x12
pci2 at ppb1 bus 2
cbb0 at pci2 dev 7 function 0 "TI PCI1225 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 7 function 1 "TI PCI1225 CardBus" rev 0x01: irq 10
xl0 at pci2 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11,
address 00:06:5b:b0:ba:2b
exphy0 at xl0 phy 24: 3Com internal media interface
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x12: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x12: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP AS10.2>
wd0: 16-sector PIO, LBA, 9797MB, 20066251 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 250, 42.S> SCSI0 0/direct removable
sd0: drive offline
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
sd0(pciide0:0:1): using PIO mode 3, Ultra-DMA mode 2
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Lite-On, LTN486 48x Max, YD01> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x12: irq 11
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x12: irq 10
iic0 at ichiic0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/share/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "SNY"
ModelName "0"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "Display" # <str>
#Option "PanelWidth" # <i>
#Option "PanelHeight" # <i>
#Option "ProgramFPRegs" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "ShowCache" # [<bool>]
#Option "VGAAccess" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Rage 128 Pro Ultra TF"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
